Effects of Pearling,Grinding Conditions,and Roller Mill Flow on the Yield and Composition of Milled Products from Hull‐less Barley

Two hull‐less barley cultivars, one with waxy starch and the other with high‐amylose starch, were roller‐milled unpearled and after 15% pearling. Flows of varying length, with diverse roll settings and roll surfaces were used to determine effects on the yield, composition, and properties of milled products. Similar trends were noted for the two cultivars. When using a short flow comprising four break passages and a sizing passage, power consumption during grinding was reduced by 10% when roll flute orientation was changed from dull‐to‐dull (D/D) to sharp‐to‐sharp (S/S). Flute orientation had minimal effects on the yield and brightness of flour, but SS grinding gave a higher yield of a fiber‐rich fraction (FRF). FRF yield and composition are of particular interest because FRF has potential as a functional food ingredient due to elevated levels of β‐glucans (BG) and arabinoxylans (AX). When using smooth frosted rolls (SM) for the sizing passage, power consumption increased by several times over using fluted sizing rolls with little advantage for either yield or BG content of FRF. FRF starch damage increased when smooth sizing rolls were used, and water swelling, a measure of water hydration capacity, also increased. Setting break and sizing rolls sharp‐to‐sharp significantly lowered the mean particle size of the FRF fraction, accompanied by moderate declines in FRF BG and AX contents. FRF yield decreased ≤50% when milling flow was lengthened to three sizing passages with intermediate impact passages, with only a moderate accompanying increase in FRF fiber content, regardless of roll conditions. Pearling 15% before milling reduced the yield of FRF by ≈30% while moderately reducing flour yield. Flour brightness was improved by pearling. When barley was pearled, FRF contained higher amounts of BG, but lower amounts of AX, phenolics, ash, and protein.     

High‐Starch and High‐β‐Glucan Barley Fractions Milled with Experimental Mills

This study focused on the performance of two hulless barley cultivars (Doyce and Merlin) and one commercial husked (hulled) sample using experimental milling. The purpose was to use experimental milling as a preliminary indicator of the milled streams with potential use for fuel ethanol production and fractions that could be used in food products. Experimental mills designed for flour production evaluation from wheat were Chopin CD1 Auto, Quadrumat Sr, Buhler, and an experimental Ross roller mill walking flow. Results indicate that the shorts had the highest levels of β‐glucan from all the mills. However, the β‐glucan content in the break flours was highest with the roller mill walking flow and the Chopin CD1 for the hulless cultivars. The lowest β‐glucan content in the break flour was found with the Buhler for Doyce. Break flour and, to a slightly lesser extent, reduction flour from all cultivars tested on all mills contained the highest starch content (up to 83%) and are therefore most appropriate for use as feedstock for fuel ethanol production. Conversely, bran and shorts from all cultivars and mills were lowest in starch (as low as 25%), making them ideal as low‐starch food ingredients.     

Distribution and Structural Variation of Nonstarch Polysaccharides in Milling Fractions of Hull‐less Barley with Variable Amylose Content

Three hull‐less barley genotypes containing starches with variable amylose content (23.8% normal, 4.3% waxy, 41.8% high‐amylose barley) were pearled to 10% and then roller‐milled to produce pearling by‐products (PBP), flour, and fiber‐rich fractions (FRF). PBP were enriched in arabinoxylans, protein, and ash and contained small amounts of starch and β‐glucans. FRF were considerably enriched in β‐glucans and arabinoxylans. The solubility of β‐glucans was higher in PBP than in FRF. The solubility of arabinoxylans was higher in FRF than in PBP. Small amounts of arabinogalactans detected in barley were concentrated in the outer portion of the barley kernel. The content and solubility of nonstarch polysaccharides (NSP) in various milling fractions was also dependent on the type of barley. To obtain more detailed information about the content and molecular structure of NSP, each milling fraction was sequentially extracted with water, alkaline [Ba(OH)₂], again with water, and finally with NaOH. These extractions resulted in four sub‐fractions: WE, Ba(OH)₂, Ba(OH)₂/H₂O, and NaOH. β‐Glucans and arabinoxylans exhibited structural heterogeneity derived from differences in their location within the kernel as well as from the genetic origin of barley. The WE arabinoxylans from FRF and flour had a substantially lower degree of branching than those from PBP. The WE arabinoxylans from FRF of high‐amylose and normal barley contained more unsubstituted Xylp residues but fewer doubly‐substituted and singly‐substituted Xylp at O‐2 than their counterparts from PBP. The WE arabinoxylans from FRF of waxy barley had a relatively high content of doubly‐substituted, but very few singly‐substituted Xylp residues. In all three barley genotypes, the ratio of tri‐ to tetrasaccharides in β‐glucans from PBP was higher than from flour and FRF. Substantial differences in the molecular weight of NSP in different milling fractions were also observed.     

Milling Performance of North European Hull‐less Barleys and Characterization of Resultant Millstreams

Four hull‐less barley samples were milled on a Bühler MLU 202 laboratory mill and individual and combined milling fractions were characterized. The best milling performance was obtained when the samples were conditioned to 14.3% moisture. Yields were 37–48% for straight‐run flour, 47–56% for shorts, and 5–8% for bran. The β‐glucan contents of the straight‐run white flours were 1.6–2.1%, of which ≈49% was water‐extractable. The arabinoxylan contents were 1.2–1.5%, of which ≈17% was water‐extractable. Shorts and bran fractions contained more β‐glucan (4.2–5.8% and 3.0–4.7%, respectively) and arabinoxylan (6.1–7.7% and 8.1–11.8%, respectively) than the white flours. For those fractions, β‐glucan extractability was high (58.5 and 52.3%, respectively), whereas arabinoxylan extractability was very low (≈6.5 and 2.0%, respectively). The straight‐run white flours had low α‐amylase, β‐glucanase, and endoxylanase activities. The highest α‐amylase activity was found in the shorts fractions and the highest β‐glucanase and endoxylanase activities were generally found in the bran fractions. Endoxylanase inhibitor activities were low in the white flours and highest in the shorts fractions. High flavanoid, tocopherol, and tocotrienol contents were found in bran and shorts fractions.     

Composition and Utilization of Barley Pearling By‐Products for Making Functional Pastas Rich in Dietary Fiber and β‐Glucans

Pearling by‐products and the pearled products of two commercial stocks of hulled barley, pearled according to an industrial process consisting of five consecutive pearling steps, were analyzed for β‐glucans, dietary fiber (total, soluble, and insoluble), protein, lipid, ash, and digestible carbohydrate. The data showed that the pearling flour fractions, abraded in the fourth and fifth hullers, contained interesting amounts of β‐glucans (3.9–5.1% db) from a nutritional point of view. These fractions were subsequently enriched in β‐glucans using a milling‐sieving process to double β‐glucan content (9.1–10.5% db). Functional pastas, enriched with β‐glucans and dietary fiber, were produced by substituting 50% of standard durum wheat semolina with β‐glucan‐enriched barley flour fractions. Although darker than durum wheat pasta, these pastas had good cooking qualities with regard to stickiness, bulkiness, firmness, and total organic matter released in rinsing water. The dietary fiber (13.1–16.1% wb) and β‐glucan (4.3–5.0% wb) contents in the barley pastas were much higher than in the control (4.0 and 0.3% wb, respectively). These values amply meet the FDA requirements of 5 g of dietary fiber and 0.75 g of β‐glucans per serving (56 g in the United States and 80 g in Italy). At present, the FDA has authorized the health claim “may reduce the risk of heart disease” for food containing β‐glucans from oat and psyllium only.     

Isolation and Characterization of High‐Purity Starch Isolates from Regular,Waxy, and High‐Amylose Hulless Barley Grains

Recovering starch from barley is problematic typically due to interference from β‐glucan (the soluble fiber component), which becomes highly viscous in aqueous solution. Dry fractionation techniques tend to be inefficient and often result in low yields. Recently, a protocol was developed in our laboratory for recovering β‐glucan from barley in which sieving whole barley flour in a semiaqueous (50% ethanol) medium allowed separation of the starch and fiber fractions without activating the viscosity of the β‐glucan. In this report, we investigate an aqueous method which further purifies the crude starch component recovered from this process. Six hulless barley (HB) cultivars representing two each of waxy, regular, and high‐amylose cultivars were fractionated into primarily starch, fiber, and protein components. Starch isolates primarily had large granules with high purity (>98%) and yield range was 22–39% (flour dry weight basis). More importantly, the β‐glucan extraction efficiency was 77–90%, meaning that it was well separated from the starch component during processing. Physicochemical evaluation of the starch isolates, which were mainly composed of large granules, showed properties that are typical of the barley genotypes.     

Milling of Regular and Waxy Starch Hull-less Barleys for the Production of Bran and Flour

Five registered cultivars of hull-less barley (HB) with regular or waxy starch were milled in a Quadrumat Jr. mill to obtain whole grain flour; pearled in a Satake mill (cultivar Condor only), and the pearled fractions examined by microscopy to determine true HB bran. The samples were milled after tempering and drying in a Buhler mill to obtain bran and flour yields. Flour color and composition of HB were unaltered on milling in the Quadrumat Jr. mill. Microscopic evidence showed that a 70% pearl yield was devoid of the grain's outer coverings, including the aleurone and subaleurone layers. Therefore, the balance of 30% constitutes true bran in HB. Dry milling (as-is grain moisture) of regular starch HB in the Buhler mill gave 59% total flour and 41% bran (bran + shorts) yields, the comparative values for the waxy starch HB were 42 and 58%. On tempering HB from 9 to 16% grain moisture, the total flour yield decreased in both types of HB but to a lesser extent in the waxy starch HB due to decreases in reduction flour. On drying HB to 5 or 7% moisture, total flour yields increased due to contamination with bran and shorts. The milling study led to the conclusion that HB, at best, be dry-milled and a bran finisher be used to obtain commercial flour extraction rates. Lower total flour yields in the waxy starch HB than in the regular starch HB milled at the same grain moisture levels seemed due to higher β-glucan rather than grain hardness. Waxy starch HB flour had higher mixograph water absorption and water-holding capacity than regular starch HB or soft white wheat flour milled under identical conditions. Roller-milled HB products offer the best potential for entry into the food market.     

Effect of Extrusion Cooking on the Primary Structure and Water Solubility of β‐Glucans from Regular and Waxy Barley

Water‐soluble β‐glucan from native and extrusion‐cooked barley flours of two barley cultivars, Candle (a waxy starch barley) and Phoenix (a regular starch barley), was isolated and purified. The purity of β‐glucan samples was 85–93% (w/w, dry weight basis) for Candle and 77–86% (w/w, dry weight basis) for Phoenix. The water solubility of β‐glucan (at room temperature, 25°C) in the native and extruded flours (primary solubility) was different from that of the purified β‐glucan samples (secondary solubility). The solubility of β‐glucan in the native and extruded Candle flour was substantially higher than that of β‐glucan in Phoenix. For both cultivars, β‐glucan in the extruded flours had solubility (primary solubility) values higher than in their native counterparts. The solubility of β‐glucan in the purified β‐glucan samples differed depending on the barley cultivar and the extrusion conditions employed. The glycosidic linkage profiles of purified soluble β‐glucan from native and extruded barley flours were determined in order to understand the changes in the primary structure of β‐glucan and the effect of extrusion on the β‐glucan structure‐solubility relationship.     

Stability of Vitamin E in Wheat Flour and Whole Wheat Flour During Storage

The stability of vitamin E during 297 days of storage of wheat flour and whole wheat flour ground on a stone mill or a roller mill, respectively, were studied. One day after milling, the total content of vitamin E, expressed in vitamin E equivalents (α‐TE), was 18.7 α‐TE and 10.8 α‐TE for stone‐milled and roller‐milled wheat flour, respectively. The difference in total vitamin E content was primarily due to the absence of the germ and bran fractions in the roller‐milled flour. The total loss of vitamin E during storage was 24% for stone‐milled wheat flour but 50% for roller‐milled wheat flour. These results indicate that vitamin E, which is present in high amounts in wheat germ, functions as an antioxidant in the stone‐milled wheat flour. Hexanal formation showed that lipid oxidation in roller‐milled flour occurred just after milling, whereas the formation of hexanal in the germ fraction displayed a lack period of 22 days, confirming that vitamin E functions as an effective antioxidant in the wheat germ. Results showed no significant difference in total loss of vitamin E for stone‐milled and roller‐milled whole wheat flour. Total loss after 297 days of storage for both milling methods was ≈32%.     

The Impact of Oat Quality on White Salted Noodles Containing Oat Flour

This research compared the physicochemical properties of six milling oat cultivars from Western Australia over two growing seasons (2011 and 2012). Variations among the cultivars in physicochemical properties, particularly β‐glucan content, were assessed to determine their suitability for incorporation into white salted noodles at a level of 30% of the flour component. The average across six oat cultivars grown in 2012 was significantly higher (P < 0.05) for protein content, lipid content, and volume of smaller sized particles (<100 µm) and significantly lower for ash content, starch damage, and volume of larger particles (>100 µm) in comparison with the average across the same oat cultivars grown in 2011. The year of cultivation by cultivar interaction was significant (P < 0.05) for ash content, protein content, β‐glucan content, starch damage, and particle size. Oat cultivar Mitika had the highest peak viscosity for 100% oat flour (whole groat) and 30% oat–wheat (OW) flour blend, which may be owing to lower amylose percentage, high protein content, and greater volume of smaller particles. The effect of growing season had greater impact on OW noodle firmness than the genetic effect of cultivars. The eating and cooking quality attributes of OW noodles, such as color, color stability, firmness, and cooking solid loss were superior for those incorporated with 2012 oat flour (whole groat) compared with 2011 oat flour. Among the six oat cultivars, Williams produced noodles with poor cooking and eating quality, and Mitika was easier to handle during processing and produced noodles with superior brightness and color stability in comparison with other oat cultivars evaluated.     

Effects of β‐Glucan Content and Pearling of Barley in Diet‐Induced Obese Mice

The effects of the β‐glucan content and pearling of barley on abdominal obesity and the proinflammatory state were investigated in diet‐induced obese mice. Male C57BL/6J mice were randomly divided into four groups and fed either a high‐fat diet containing high‐β‐glucan barley (Beau Fiber [BF]) or a high‐fat diet containing β‐glucan‐free barley (Shikoku‐hadaka 84(bgl ) [BGL]) as whole grain flour or 60% pearled flour for 12 weeks. The weights of mesenteric fat, serum total and low density lipoprotein cholesterol levels, serum insulin and fasting glucose levels, oral glucose tolerance test results, and messenger RNA (mRNA) expression of proinflammatory markers in epididymal fat in both BF groups were significantly lower than those of both BGL groups. The abundance of Bacteroides in both BF groups was significantly higher than that in both BGL groups, whereas the abundance of Clostridium clusters in both BF groups was significantly lower than that in both BGL groups. No significant differences between the whole grain and pearled flours were observed. These results suggest that high‐β‐glucan barley attenuates the progression of abdominal obesity and the proinflammatory state in diet‐induced obese mice compared with β‐glucan‐free barley, possibly by modifying insulin secretion and the microbiota.     

Evaluation of White Salted Noodles Enriched with Oat Flour

Oat consumption is regarded as having significant health benefits. The enrichment of white salted noodles with oat flour would provide a potential health benefit but may affect the texture and sensory quality. Oat cultivars grown in Western Australia (Yallara, Kojonup, Mitika, Carrolup, and new line SV97181‐8) and a commercial oat variety were milled into flour and added to wheat flour at 10, 20, and 30% to produce oat‐enriched white salted noodles. The purpose of the study was to determine the quality characteristics of the oat flours and to assess the influence the oat flour blends had on noodle texture, color, and sensory characteristics. In addition, another goal was to determine whether the different oat cultivars had similar potential to provide health benefits by measuring the β‐glucan content before and after processing. The results indicated that protein, ash content, and noodle firmness increased with the increased percentage of oat flour in the noodle formulations, whereas the pasting properties of the noodle wheat–oat flour blends did not differ significantly. The color of raw noodle sheets and boiled noodles changed significantly with oat incorporation and resulted in lower lightness/brightness, higher redness, lower yellowness, and lower color stability in comparison to standard wheat white salted noodles. Noodles made with the lowest oat percentage (10%) scored highest for all sensory parameters and were significantly different in appearance, color, and overall acceptability compared with noodles made with 20 and 30% oat flour. The β‐glucan content of the flour blends increased with the increase in the level of oat incorporation but subsequently decreased during processing into noodles. The decrease in the β‐glucan content varied across the different oat cultivars and levels of incorporation into the noodles. A new oat cultivar, SV97181‐8, exhibited the least β‐glucan loss during processing. In this study, the quality characteristics of white salted noodles enriched with oat flour from Western Australian cultivars were determined to provide essential information for the commercial development of healthier noodles.     

Effect of Barley Flour on Development of Rice‐Based Extruded Snacks

This study was conducted to develop a ready‐to‐eat extruded food using a single‐screw laboratory extruder. Blends of Indian barley and rice were used as the ingredients for extrusion. The effect of extrusion variables and barley‐to‐rice ratio on properties like expansion ratio, bulk density, water absorption index, hardness, β‐glucan, L*, a*, b* values, and pasting characteristics of extruded products were studied. A central composite rotatable design was used to evaluate the effects of operating variables: die temperature (150–200°C), initial feed moisture content (20–40%), screw speed (90–110 rpm), and barley flour (10–30%) on properties like expansion ratio, bulk density, water absorption index (WAI), hardness, β‐glucan, L*, a*, b* values, and sensory and pasting characteristics of extruded products. Die temperature >175°C and feed moisture <30% resulted in a steep increase in expansion ratio and a decrease in bulk density. Barley flour content of 10% and feed moisture content of <20% resulted in an increased hardness value. When barley flour content was 30–40% and feed moisture content was <20%, a steep increase in the WAI was noticed. Viscosity values of extruded products were far less than those of corresponding unprocessed counterparts as evaluated. Rapid visco analysis indicated that the extruded blend starches were partially pregelatinized as a result of the extrusion process. Sensory scores indicated that barley flour content at 20%, feed moisture content at 30%, and die temperature at 175°C resulted in an acceptable product. The prepared product was roasted in oil using a particular spice mix and its sensory and nutritional properties were studied.     

Laboratory Milling Method for Whole Grain Soft Wheat Flour Evaluation

Whole grain wheat products are a growing portion of the foods marketed in North America, yet few standard methods exist to evaluate whole grain wheat flour. This study evaluated two flour milling systems to produce whole grain soft wheat flour for a wire‐cut cookie, a standard soft wheat product. A short‐flow experimental milling system combined with bran grinding in a Quadro Comil produced a whole grain soft wheat flour that made larger diameter wire‐cut cookies than whole grain flour from a long‐flow experimental milling system. Average cookie diameter of samples milled on the short‐flow mill was greater than samples milled on the long‐flow system by 1 cm/two cookies (standard error 0.09 cm). The long‐flow milling system resulted in more starch damage in the flour milling than did the short‐flow system. The short‐flow milling system produced flours that were useful for discriminating among wheat cultivars and is an accessible tool for evaluating whole grain soft wheat quality.     

Isolation,Fractionation, and Structural Characteristics of Alkali‐Extractable β‐Glucan from Rye Whole Meal

The main nonstarch polysaccharide of rye is arabinoxylan (AX), but rye contains significant levels of (1→3)(1→4)‐β‐d ‐glucan, which unlike oat and barley β‐glucan, is not readily extracted by water, possibly because of entrapment within a matrix of AX cross‐linked by phenolics. This study continues objectives to improve understanding of factors controlling the physicochemical behavior of the cereal β‐glucans. Rye β‐glucan was extracted by 1.0N NaOH and increasing concentrations of ammonium sulfate were used to separate the β‐glucan from AX and prepare a series of eight narrow molecular weight (MW) distribution fractions. Composition and structural characteristics of the isolated β‐glucan and the eight fractions were determined. High‐performance size‐exclusion chromatography (HPSEC) with both specific calcofluor binding and a triple detection (light scattering, viscometry, and refractive index) system was used for MW determination. Lichenase digestion followed by high‐performance anion exchange chromatography of released oligosaccharides, was used for structural evaluation. The overall structure of all fractions was similar to that of barley β‐glucan.     

Isolation and Characterization of Water‐Extractable Arabinoxylan from Hull‐less Barley Flours

A new procedure was developed for the isolation of highly purified water‐extractable arabinoxylan (WE‐AX) from hull‐less barley flour. It included inactivation of endogenous enzymes, removal of proteins with silica gel, and removing β‐glucans, arabinogalactan‐peptides, and starch fragments by enzyme or solvent precipitation steps. WE‐AX recovered by this isolation procedure represented, on average, 47% of all WE‐AX present in hull‐less barley flour. Purified WE‐AX from flour of different hull‐less European barley cultivars contained 84.9–91.8% AX and showed small structural differences. The apparent peak molecular weight of the purified WE‐AX was 730,000–250,000, and the arabinose‐to‐xylose ratio was 0.55–0.63. Proton nuclear magnetic resonance spectroscopy showed that the levels of un‐, O‐2 mono‐, O‐3 mono‐, and O‐2,O‐3 disubstituted xylose residues were 59.1–64.7%, 8.2–10.0%, 5.7–10.6%, and 17.6– 23.1%, respectively, and the ratio of di‐ to monosubstituted xylose was 0.90–1.54. Both O‐3 mono‐ and disubstituted xylose residues occurred isolated or next to disubstituted xylose residues in the WE‐AX chain.     

Effects of Alkali Debranning,Roller Mill Cracking and Gap Setting,and Alkali Steeping Conditions on Milling Yields from a Dent Corn Hybrid

Starch yield was significantly affected by all three main unit operations in alkali wet‐milling (debranning, roller milling, and steeping). The conditions for the three unit operations were studied using a single hybrid. Studies on debranning showed that optimal separation between pericarp and corn endosperm was obtained when corn was soaked in a 1.5–2% NaOH solution at 85°C for 5 min. Passing debranned corn through smooth roller mill once or twice did not affect the product yields, but passing the corn through the roller mill three times decreased the germ yield because of a large amount of broken germ. A 62% higher processing rate could be achieved when passing corn through the mill twice than by passing it through the mill once. The gap should be set at 2.0 mm when passing corn through the mill once, and it should be set at 3.5 mm for the first pass and 2.0 mm for the second pass when passing corn through the mill twice. Starch yield was more sensitive to NaOH concentration and steep temperature than to steep time. The highest starch yield was obtained when steeping corn in 0.5% NaOH for 1 hr at 45°C.     

Effect of Tempering Conditions on Milling Performance and Flour Functionality

Tempering conditions of wheat grain change the quality of the flour, yet most experimental milling systems use a standard tempering without optimization. The effect of tempering condition on milling performance and flour functionality for soft red winter (SRW) wheat grain was tested by measuring flour yield, ash, polyphenol oxidase (PPO), and solvent retention capacity (SRC) in grain samples from three SRW cultivars (Roane, Cyrus, and Severn). Tempering was conducted with a full factorial design of initial wheat moisture, tempered wheat moisture, tempering temperature, and tempering time at two levels. Tempered wheat moisture had the largest effect on milling performance and flour functionality. Flour yield was more reduced for all samples tempered at 15% moisture than for samples tempered to 12% moisture. Flour quality of the 15% tempered sample was better than the 12% tempered samples due to less bran contamination as measured by flour ash and PPO. Increasing the tempering moisture increased flour sucrose SRC and lactic acid SRC but reduced sodium carbonate SRC for samples. Changing tempered wheat moisture changed flour yield and quality much more than did changing the length of time for tempering, the temperature at wheat is tempered, or differences in the initial moisture of the wheat before tempering. The last three effects could be used to improve flour yield in both the 12 and 15% tempered wheat treatment but the detrimental effects of these treatments on flour quality were minimal when combined with the 15% tempered wheat moisture treatment.     

Quality of Flours from Waxy and Nonwaxy Barley for Production of Baked Products

One nonwaxy (covered) and two waxy (hull-less) barleys, whole grain and commercially abraded, were milled to break flour, reduction flour, and the bran fraction with a roller mill under optimized conditions. The flour yield range was 55.3–61.8% in whole grain and increased by 9–11% by abrasion before milling. Break flours contained the highest starch content (≤85.8%) independent of type of barley and abrasion level. Reduction flours contained less starch, but more protein, ash, free lipids, and total β-glucans than break flours. The bran fraction contained the highest content of ash, free lipids, protein, and total β-glucans but the lowest content of starch. Break flours milled from whole grain contained 82–91% particles <106 μm, and reduction flours contained ≈80% particles <106 μm. Abrasion significantly increased the amount of particles <38 μm in break and reduction flours in both types of barley. Viscosity of hot paste prepared with barley flour or bran at 8% concentration was strongly affected by barley type and abrasion level. In cv. Waxbar, the viscosity in bran fractions increased from 428 to 1,770 BU, and in break flours viscosity increased from 408 to 725 BU due to abrasion. Sugar snap cookies made from nonwaxy barley had larger diameter than cookies prepared from waxy barley. Cookies made from break flours were larger than those made from reduction flours, independent of type of barley. Quick bread baked from nonwaxy barley had a loaf volume similar to that of wheat bread, whereas waxy barley bread had a smaller loaf volume. Replacement of 20% of wheat flour by both waxy and nonwaxy barley flour or bran did not significantly affect the loaf volume but did decrease the hardness of quick bread crumb.     

Production of Starch with Very Low Protein Content from Soft and Hard Wheat Flours by Jet Milling and Air Classification

Jet milling is a fluid energy impact‐milling technique generally used for the ultrafine reduction of higher value materials. The efficiency of jet milling combined with air classification appears very efficient to separate starch from other wheat flour aggregate components and to produce wheat starch with very low residual protein content. Indeed, residual protein content of the starch‐rich fraction can be reduced to <2% db with a series of successive grinding and air classification operations. Lipid and pentosan contents were also reduced in the starch‐rich fraction. Nevertheless, jet milling cannot eliminate grinding differences observed between different types of wheat. Wheat hardness continues to have an effect on milling and classification yields and on the composition of air classification fractions. To obtain starch‐rich fraction with only 2% protein content, hard wheat flour required a series of at least five grinding steps, whereas only three steps are necessary for soft wheat flour. Under these conditions, hard wheat flours give 24% mass yield with 12% starch damage compared with 39% yield and a low starch damage content (6.4%) for soft wheat flour. These results highlight new prospects for the development of cereal flours, especially soft wheat flours.