Optimized synthesis of lipase-catalyzed hexyl acetate in n-hexane by response surface methodology

Hexyl acetate, a short-chain ester with fruity odor, is a significant green note flavor compound and widely used in the food industry. The ability for immobilized lipase from Mucor miehei (Lipozyme IM-77) to catalyze the transesterification of hexanol with triacetin was investigated in this study. Response surface methodology and five-level-five-factor central composite rotatable design were adopted to evaluate the effects of synthesis variables, such as reaction time (2-10 h), temperature (25-65 degrees C), enzyme amount (10-50%; 0.024-0.118 BAUN), substrate molar ratio of triacetin to hexanol (1:1 to 3:1), and added water content (0-20%) on percentage molar conversion of hexyl acetate. The results showed that reaction temperature and substrate molar ratio were the most important parameters and that added water content had less of an effect on percent molar conversion. On the basis of canonical analysis, optimum synthesis conditions were as follows: reaction time, 7.7 h; temperature, 52.6 degrees C; enzyme amount, 37.1% (0.089 BAUN); substrate molar ratio, 2.7:1; and added water, 12.5%. The predicted value was 88.9% molar conversion, and the actual experimental value was 86.6% molar conversion.     

Feasibility study on chemometric discrimination of roasted Arabica coffees by solvent extraction and Fourier transform infrared spectroscopy

In this feasibility study, Fourier transform infrared (FTIR) spectroscopy and chemometric analysis were adopted to discriminate coffees from different geographical origins and of different roasting degrees. Roasted coffee grounds were extracted using two methods: (1) solvent alone (dichloromethane, ethyl acetate, hexane, acetone, ethanol, or acetic acid) and (2) coextraction using a mixture of equal volume of the solvent and water. Experiment results showed that the coextraction method resulted in cleaner extract and provided a greater amount of spectral information, which was important for sample discrimination. Principal component analysis of infrared spectra of ethyl acetate extracts for dark and medium roast coffees showed separated clusters according to their geographical origins and roast degrees. Classification models based on soft independent modeling of class analogy analysis were used to classify different coffee samples. Coffees from four different countries, which were roasted to dark, were 100% correctly classified when ethyl acetate was used as a solvent. The FTIR-chemometric technique developed here may serve as a rapid tool for discriminating geographical origin of roasted coffees. Future studies involving green coffee beans and the use of larger sample size are needed to further validate the robustness of this technique.     

New qualitative approach in the characterization of antioxidants in white wines by antioxidant free radical scavenging and NMR techniques

The aim of this study was to obtain new information on antioxidant compounds in white wines. For this purpose, white wine degradation was promoted by a forced aged protocol, and six normally aged white wines from different vintages were analyzed. Both normal and forced aged wines were sequentially extracted using hexane and ethyl acetate. Apolar antioxidants were removed using hexane, and polar antioxidants were extracted with ethyl acetate. This last residue was subject to partial re-extraction with hexane and acetone. The antioxidant capacity of the wines and of each fraction was evaluated by two free radical methods, ABTS and DPPH. Normal aging provides a decrease in the total antioxidant capacity of wines. The antioxidant activity of ethyl acetate/acetone extracts was approximately 95% higher than that found for the hexane extracts. Concerning the forced aged wines, results showed that the wine submitted to a temperature of 60 degrees C for 21 days had higher antioxidant activity than that submitted to a temperature of 20 degrees C. With regard to the ethyl acetate/acetone extracts, oxygen and temperature treatment leads to a decrease in their antioxidant activity. NMR analysis was performed in the highest antioxidant capacity organic fractions (ethyl acetate/acetone extracts) and in the aqueous fraction of the control wine (T = 20 degrees C), in order to attempt the characterization of species involved in oxygen protection. Possible structures of antioxidant compounds in white wines were proposed. Two of these are tyrosol-like structures. This molecule is a well-known phenolic compound in wine, and it is reported to have antioxidative effects.     

Solvent-free enzymatic preparation of feruloylated monoacylglycerols optimized by response surface methodology

The ability of immobilized lipase B from Candida antarctica (Novozym 435) to catalyze the direct esterification of glyceryl ferulate (FG) and oleic acid for feruloylated monoacylglycerols (FMAG) preparation in a solvent-free system was investigated. Enzyme screening and the effect of glycerol on the initial reaction rate of esterification were also investigated. Response surface methodology (RSM) was used to optimize the effects of the reaction temperature (55-65 degrees C), the enzyme load (8-14%; relative to the weight of total substrates), oleic acid/(FG + glycerol) (6:1-9:1; w/w), and the reaction time (1-2 h) on the conversion of FG and yield of FMAG. Validation of the RSM model was verified by the good agreement between the experimental and the predicted values of FG conversion and FMAG yield. The optimum preparation conditions were as follows: temperature, 60 degrees C; enzyme load, 8.2%; substrate ratio, 8.65:1 (oleic acid/(FG + glycerol), w/w); and reaction time, 1.8 h. Under these conditions, the conversion of FG and yield of FMAG are 96.7 +/- 1.0% and 87.6 +/- 1.2%, respectively.     

Optimal formation of hexyl laurate by Lipozyme IM-77 in solvent-free system

A medium-chain ester, hexyl laurate, with fruity flavor is primarily used in personal care formulations as an important emollient for cosmetic applications. To conform to the "natural" interests of consumers, the ability of immobilized lipase from Rhizomucor miehei (Lipozyme IM-77) to catalyze the direct esterification of hexanol and lauric acid by using a solvent-free system was investigated in this study. Response surface methodology (RSM) and four-factor-five-level central composite rotatable design (CCRD) were employed to evaluate the effects of synthesis parameters, such as reaction time (10-50 min), temperature (45-85 degrees C), lipase amount (10-30 mg/volume; 0.077-0.231 batch acidolysis units of Novo (BAUN), and pH memory (5-9), on percentage molar conversion of hexyl laurate by lipase-catalyzed direct esterification. Reaction time, temperature, and enzyme amount had significant effects on percent molar conversion. On the basis of ridge maximum analysis, the optimum synthesis conditions for hexyl laurate were a reaction time of 40.6 min, a temperature of 58.2 degrees C, an enzyme amount of 25.4 mg/volume (0.196 BAUN), and a pH memory of 5.9. The predicted percentage molar conversion of hexyl laurate was 69.7 +/- 1.4%.     

Enzymatic acylation of flavonoids: effect of the nature of the substrate, origin of lipase, and operating conditions on conversion yield and regioselectivity

The conversion yield at equilibrium, the initial rate, and the regioselectivity of the enzymatic acetylation of aglycone flavonoids (quercetin, naringenin, hesperetin, and chrysin) were investigated and compared to those obtained with a glycosylated one (isoquercitrin). The effects of a wide range of operating conditions were quantified. Fourier transform infrared spectrometry (FT-IR), NMR, and high performance liquid chromatography electrospray ionization mass spectrometry (HPLC-ESI-MS) analyses showed that for glycosylated flavonoids, in the presence of Candida antarctica (CAL-B), the acetylation occurred on the 2'-OH, 3'-OH, and 6'-OH of the glucose part, while with Pseudomonas cepacea lipase (PSL-C) acetylation takes place on 6'-OH of the sugar and 4'-OH of the B-ring. For aglycone flavonoids, the acetylation occurred only with PSL-C on 4'-OH, 3'-OH, and 7-OH hydroxyls. The conversion yield and the number and the relative proportions of the synthesized products were found dependent on the nature of the enzyme, the molar ratio, and the flavonoid structure. The initial rate was affected only by the origin of the enzyme.     

Process for isolation of cardanol from technical cashew (Anacardium occidentale L.) nut shell liquid

Commercially available technical cashew (Anacardium occidentale L.) nut shell liquid (CNSL) contains mainly cardanol (decarboxylated anacardic acid) and cardol. Cardanol, the monophenolic component of technical CNSL, is widely used as a synthon for the preparation of a number of polymers and agricultural products. This paper describes the separation of cardanol from toxic cardol. Technical CNSL was dissolved in a mixture of methanol and ammonium hydroxide (8:5) and extracted with hexane to obtain cardanol. The resultant methanolic ammonia layer was extracted with a mixture of ethyl acetate and hexane to yield cardol. This is the first industrially feasible process based on solvent extractions for the isolation of cardanol from technical CNSL.     

Enzyme-assisted acidolysis of borage (Borago officinalis L.) and evening primrose (Oenothera biennis L.) oils: incorporation of omega-3 polyunsaturated fatty acids.

Lipase-catalyzed acidolysis of borage (Borago officinalis L.) and evening primrose (Oenothera biennisL.) oils with long-chain omega3 polyunsaturated fatty acids (PUFA), namely, eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids, was carried out in hexane, and the products were analyzed using gas chromatography. The most effective lipase for incorporation of omega3 PUFA into these oils was Pseudomonas sp. as compared to lipases from Mucor miehei and Candida antarctica. Response surface methodology was used to obtain a maximum yield of EPA+DHA incorporation while using the minimum amount of enzyme possible. The process variables studied were the amount of enzyme (150-350 units), reaction temperature (30-60 degrees C), and reaction time (6-30 h). All experiments were carried out according to a face-centered cube design. Under optimum conditions, incorporation of EPA+DHA was 35.5% in borage oil and 33. 6% in evening primrose oil. The modified borage and evening primrose oils containing gamma-linolenic acid, EPA, and DHA were successfully produced and may have potential health benefits.     

Matrix solid phase dispersion (MSPD) isolation and liquid chromatographic determination of furazolidone in pork muscle tissue

A method for the isolation and liquid chromatographic (LC) determination of furazolidone in pork muscle tissue is presented. Blank or furazolidone-fortified pork muscle tissue samples (0.5 g) were blended with octadecylsilyl (C18, 18% load, endcapped, 2 g) derivatized silica. A column made from C18/pork matrix was first washed with hexane (8 mL), followed by elution of furazolidone with ethyl acetate. The ethyl acetate extract was then passed through an activated alumina column. The eluate contained furazolidone that was free from interfering compounds when analyzed by LC with UV detection (photodiode array, 365 nm). Detector response with increasing concentrations of furazolidone isolated from fortified samples was linear (r = 0.998 +/- 0.002) with an average percentage recovery of 89.5 +/- 8.1% for the concentration range (7.8-250 ng/g) examined and resulted in a minimum detectable limit of 390 pg on column, and a detector response of more than 5 times baseline noise. The inter-assay variability was 9.9 +/- 5.4% with an intra-assay variability of 1.5%.     

High pressure liquid chromatographic determination of zearalenone in chicken tissues

A method is reported for the extraction and analysis of zearalenone in chicken fat, heart muscle, and kidney tissue by using high pressure liquid chromatography (HPLC). Zearalenone is extracted with acetonitrile, cleaned up with hexane, and extracted further with ethyl acetate. Zearalenone is determined by HPLC using a reverse phase radial compression separation system, an ultraviolet absorbance detector, and a mobile phase of acetonitrile-water (60 + 40) (v/v). Recoveries of zearalenone added at levels from 50 to 200 ng/g are in the range 82.6-95.1%.     

2,2'-Diphenyl-1-picrylhydrazyl radical-scavenging active components from adlay (Coix lachryma-jobi L. var. ma-yuen Stapf) hulls

An activity-directed fractionation and purification process was used to identify the antioxidative components of adlay hulls. Hulls of adlay (Coix lachryma-jobi L. var. ma-yuen Stapf) were extracted with methanol and then separated into water, 1-butanol, ethyl acetate, and hexane fractions. The 1-butanol-soluble fraction exhibited greater capacity to scavenge 2,2'-diphenyl-1-picrylhydrazyl (DPPH) radicals when compared with fractions soluble in water, ethyl acetate, and hexane phases. The 1-butanol fraction was then subjected to separation and purification using Diaion HP-20 chromatography, silica gel chromatography, and HPLC. Six compounds showing strong antioxidant activity were identified by spectroscopic methods ((1)H NMR, (13)C NMR, IR, and MS) and by comparison with authentic samples to be coniferyl alcohol (1), syringic acid (2), ferulic acid (3), syringaresinol (4), 4-ketopinoresinol (5), and a new lignan, mayuenolide (6).     

Continuous hot pressurized solvent extraction of 1,1-diphenyl-2-picrylhydrazyl free radical scavenging compounds from Taiwan yams (Dioscorea alata)

This study investigates a semicontinuous hot pressurized fluid extraction process and the scavenging activity on the 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical of the extract from Taiwan yams (Dioscorea alata). Liquid-liquid extractions were preliminarily employed to generate six fractions, initially extracted by ethanol. Then, the aqueous solution of dried crude ethanol extract was sequentially fractionated by hexane, chloroform, ethyl acetate, and n-butanol. The EC50 value was defined as the UV absorption of DPPH concentrations sufficiently decreased to 50% of the original value. It was found that all peel portions have a better effect on scavenging of the DPPH free radical than meat portions, especially for the ethyl acetate partition of the peel portion of Tainung #2 yam. Its EC50 value (14.5 microg mL(-1)) was even lower than that of ascorbic acid (21.4 microg mL(-1)). Furthermore, semicontinuous hot pressurized ethanol was superior to hot pressurized water in extracting the compound scavenging the DPPH radical from the Purpurea-Roxb peel. The recovery of four unknown compounds corresponded to the scavenging ratio of DPPH free radical in the hot pressurized ethanol extract. Finally, three-level and four-factor experimental design revealed that ethanol ratio and temperature were the most effective factors in order. Conditions of 80% of aqueous ethanol, 20.0 kg/kg solid ratio, 180 psig (1.342 MPa), and 100 degrees C were preferred to extract those antioxidants from the yam peel.     

Antioxidant effect of phenolic compounds, alpha-tocopherol, and other minor components in virgin olive oil

The effect of acidity, squalene, hydroxytyrosol, aldehydic form of oleuropein aglycon, hydroxytyrosyl acetate, tyrosol, homovanillic acid, luteolin, apigenin, alpha-tocopherol, and the mixtures hydroxytyrosol/hydroxytyrosyl acetate, hydroxytyrosol/tyrosol, and hydroxytyrosol/alpha-tocopherol on the oxidative stability of an olive oil matrix was evaluated. A purified olive oil was spiked with several concentrations of these compounds and, then, subjected to an accelerated oxidation in a Rancimat apparatus at 100 degrees C. Acidity, squalene, homovanillic acid, and apigenin showed negligible effect. At the same millimolar concentrations, the different o-diphenolic compounds yielded similar and significant increases of the induction time, alpha-tocopherol a lesser increase, and tyrosol a scarce one. At low concentrations of o-diphenols and alpha-tocopherol, a linear relationship between induction time and concentration was found, but at high concentrations the induction time tended toward constant values. To explain this behavior, a kinetic model was applied. The effect of the mixtures hydroxytyrosol/hydroxytyrosyl acetate was similar to that of a single o-diphenol at millimolar concentration equal to the sum of millimolar concentrations of both compounds. Concentrations of tyrosol >0.3 mmol/kg increase the induction time by 3 h. The mixtures hydroxytyrosol/alpha-tocopherol showed opposite effects depending on the relative concentrations of both antioxidants; so, at hydroxytyrosol concentrations <0.2 mmol/kg, the addition of alpha-tocopherol increased the induction time, whereas at higher hydroxytyrosol concentrations, the alpha-tocopherol diminished the stability.     

Investigation of Australian olive mill waste for recovery of biophenols

Olive mill waste is a potential source for the recovery of phytochemicals with a wide array of biological activities. Phytochemical screening of hexane, methanol, and water extracts revealed a diversity of compounds, perhaps overlooked in previous studies through intensive cleanup procedures. Methanol and water extracts contained large amounts of biophenols, and further testing of polar extraction solvents, including ethyl acetate, ethanol, propanol, acetone, acetonitrile, and water/methanol mixtures, highlighted the latter as the solvent of choice for extraction of the widest array of phenolic compounds. Stabilization of the resulting extract was best achieved by addition of 2% (w/w) sodium metabisulfite. Quantitative data are reported for nine biophenols extracted using 60% (v/v) methanol in water with 2% (w/w) sodium metabisulfite. Six compounds had recoveries of greater than 1 g/kg of freeze-dried waste: hydroxytyrosol glucoside, hydroxytyrosol, tyrosol, verbascoside, and a derivative of oleuropein.     

Preparation of deoxynivalenol (vomitoxin) from field-inoculated corn

A process was developed for production of gram quantities of deoxynivalenol (DON) from corn that had been inoculated in the field with Fusarium graminearum and was estimated to contain 400-500 mg DON/kg. Steps in the purification procedure included extraction with methanol-water (1 + 1), partition from an aqueous solution into ethyl acetate by using a hydrophilic matrix, defatting, Florisil column chromatography, methylene chloride-water partition, semipreparative liquid chromatography (LC), and crystallization from ethyl acetate. The average yield of crystalline DON produced by this method (or with minor variations) was 281 mg/kg.     

Determination of acequinocyl and hydroxyacequinocyl on fruits and vegetables by HPLC-DAD

A method for determining residues of the new reduced-risk pesticide acequinocyl and its deacetylated derivative hydroxyacequinocyl on fruits and vegetables (grapes, lemons, pears, and tomatoes) by HPLC is described. The pesticides were extracted from the fruits and vegetables with hexane and ethyl acetate solution (1:1, v/v), determined by HPLC-DAD at 250 nm and confirmed by LC/MS. No cleanup was necessary. This method is characterized by recoveries (0.01-4 mg/kg) > 77%, while the coefficient of variation was determined to be less than 11%. The limit of quantitation for both acequinocyl and hydroxyacequinocyl was 0.01 mg/kg for all matrixes.     

Lipase-catalyzed modification of rice bran oil to incorporate capric acid

Capric acid (C10:0) was incorporated into rice bran oil with an immobilized lipase from Rhizomucor miehei as the biocatalyst. Effects of incubation time, substrate mole ratio, enzyme load, and water addition on mole percent incorporation of C10:0 were studied. Transesterification was performed in an organic solvent, hexane, and under solvent-free condition. Pancreatic lipase-catalyzed sn-2 positional analysis and tocopherol analysis were performed before and after enzymatic modification. Products were analyzed by gas-liquid chromatography (GLC) for fatty acid composition. After 24 h of incubation in hexane, there was an average of 26.5 +/- 1.8 mol % incorporation of C10:0 into rice bran oil. The solvent-free reaction produced an average of 24.5 +/- 3.7 mol % capric acid. In general, as the enzyme load, substrate mole ratio, and incubation time increased, the mole percent of capric acid incorporation also increased. Time course reaction indicated C10:0 incorporation increased up to 27.0 mol % at 72 h, for the reaction in hexane, and up to 29.6 mol % at 12 h, for the solvent-free reaction. The highest C10:0 incorporations (53.1 and 43.2 mol %) for the mole ratio experiment occurred at a mole ratio of 1:8 for solvent and solvent-free reactions, respectively. The highest C10:0 incorporation (27.9 mol %) for the reaction in hexane occurred at 10% enzyme load, and the highest incorporation (34.4 mol %) for the solvent-free reaction occurred at 20% enzyme load. Incorporation of C10:0 into rice bran oil declined with the addition of increasing amounts of water after reaching 30.3 mol % at 2% water addition in hexane, and in the solvent-free reaction after reaching 35.9 mol %.     

Effect of carbohydrate substrate on fermentation by kefir yeast supported on delignified cellulosic materials

The suitability of delignified cellulosic (DC) material supported kefir yeast to ferment raw materials that contain various single carbohydrates, for the production of potable alcohol and alcoholic drinks, is examined in this investigation. Results are reported of fermentations carried out with sucrose, fructose, and glucose in synthetic media. Repeated batch fermentations at various initial sugar concentrations of sucrose, fructose, and glucose were performed at 30 degrees C in the presence of the aforementioned biocatalyst. The results clearly show feasible yields in the range of 0.38-0.41 g/g, alcohol concentrations of 7.6-8.2% v/v, fermentation time of 90-115 h, and conversion of 92-96%. DC material supported kefir fermented 11-fold more rapidly than free cells and 9-fold more rapidly in comparison to kissiris supported kefir. The main volatile byproducts such as amyl alcohols (mixture of 2-methyl-1-butanol and 3-methyl-1-butanol), ethanal, and ethyl acetate were formed in all sugar fermentation products. The formation of 65-110 ppm of ethyl acetate is as high and even higher than that obtained with traditional wine yeasts. The increase of the initial concentration of sugar in the fermentation media resulted in an increase in contents of volatiles. The fine aroma that was obtained in the product of fructose could be attributed to the high percentage of ethyl acetate on total volatiles. The efficiency of DC material supported kefir was the same for the fermentations of individual sugars or a mixture of fructose, sucrose, and glucose. When whey with raisin extracts was fermented, lower yields were obtained but the aroma of the product was even better.     

Isolation, characterization and antifungal activity of major constituents of the Himalayan lichen Parmelia reticulata Tayl

Antifungal activity of hexane, ethyl acetate and methanol extracts of Parmelia reticulata was evaluated against soilborne pathogenic fungi, namely, Sclerotium rolfsii, Rhizoctonia solani, R. bataticola, Fusarium udum, Pythium aphanidermatum and P. debaryanum by poisoned food technique. Maximum antifungal activity was exhibited by hexane and ethyl acetate extracts against most of the test pathogens. Secondary metabolites, namely, (±)-isousnic acid, (±)-protolichesterinic acid, atranorin, evernyl, ethyl hematommate, ethyl orsellinate, methyl hematommate (3-formyl-2,4-dihydroxy-6-methylbenzoic acid methyl ester), 2-hydroxy-4-methoxy-3,6-dimethylbenzoic acid, 1-hydroxy-3,6-dimethoxy-8-methyl-xanthen-9-one, baeomycesic acid and salazinic acid, were isolated from the above extracts and identified by 1H NMR, 13C NMR and mass spectroscopic methods. When these metabolites were tested for antifungal activity against test pathogens, maximum antifungal activity was exhibited by (±)-protolichesterinic acid against R. solani (ED50=23.09 μg mL(-1)) and P. debaryanum (ED50=16.07 μg mL(-1)) and by atranorin against S. rolfsii (ED50=39.70 μg mL(-1)). The antifungal activity of protolichesterinic acid was found to be comparable to that of hexaconazole, a commercial fungicide.     

2,2-Diphenyl-1-picrylhydrazyl radical-scavenging active components from Polygonum multiflorum thunb

An activity-directed fractionation and purification process was used to identify the antioxidative components of Polygonum multiflorum Thunb. (PM). Dried root of PM was extracted with 95% ethanol and then separated into water, ethyl acetate, and hexane fractions. Among these only the ethyl acetate phase showed strong antioxidant activity by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) test when compared with water and hexane phases. The ethyl acetate fraction was then subjected to separation and purification using silica gel column chromatography and Sephadex LH-20 chromatography. Three compounds showing strong antioxidant activity were identified by spectral methods ((1)H NMR, (13)C NMR, and MS) and by comparison with authentic samples to be gallic acid, catechin, and 2,3,5, 4'-tetrahydroxystilbene 2-O-beta-D-glucopyranoside.