Hay yield and nitrogen harvest in smooth bromegrass mixtures with alfalfa and red clover in relation to nitrogen application

An experiment was conducted in order to investigate hay yield and nitrogen harvest in binary smooth bromegrass (Bromus inermis Leyss cv. Tohum Islah) mixtures with alfalfa (Medicago sativa L. cv. Kayseri) and red clover (Trifolium pratense L. cv. Tohum Islah) in Erzurum, Turkey for 5 years between 1991 and 1995. The Hay yield, nitrogen harvest, protein concentration and land equivalent ratio (LER) in the mixtures with alternating rows of 1:1, 2:1 and 1:2 of smooth bromegrass with alfalfa and red clover were compared to those in pure legume stands without any N-fertilizer application or pure smooth bromegrass stands that received 0, 50, 100 and 150 kg ha⁻¹ N. The mixtures had no N fertilization apart from 40 kg N ha⁻¹ in the establishment year. The dry matter production in all the mixtures receiving no N fertilizer application was higher than in pure legume stands. Pure grass stands were sustained only with the application of 150 kg ha⁻¹ N. The highest hay yields were obtained from the mixtures of smooth bromegrass (Sb) with red clover (Rc) (2Rc 1Sb) (14.65 t ha⁻¹) and with alfalfa (A) (1A 1 Sb) (14.49 t ha⁻¹). Although N application increased Sb yields in pure stands, the highest yields obtained with N fertilization were still lower than the yields in the mixtures without N application. The superiority of the mixtures was also reflected by their large N harvests (e.g. 355.9 kg N ha⁻¹ in 2Rc 1Sb plots) compared to pure Rc (317.8 kg N ha⁻¹), pure A (294.3 kg N ha⁻¹) and pure Sb stands that received 150 kg N ha⁻¹. The nitrogen harvest increased in pure Sb plots as the N doses applied increased. Furthermore, the protein concentration of the hay from the mixtures (158.2–165.7 mg g⁻¹) was equal to that of the pure A stands (165.7 mg g⁻¹) and higher than that of pure Sb stands (122.9 mg g⁻¹ at 150 kg N ha⁻¹ application) although the hay from pure Rc plots had the highest protein concentration (179.3 mg g⁻¹). The LER values were also higher in the mixtures (e.g. 1.28 in 1A 1Sb and 1.28 in 2Rc 1Sb plots) compared with the pure stands. The mixture plots also had a more balanced temporal distribution of hay. The grass component was more productive in early spring, whereas the legume fractions grew better in the summer. In conclusion, for a sustainable production of high-quality hay and greater N harvests without using N fertilizers, binary mixtures of Sb with A in alternating rows (1A 1Sb) were recommended for long-purpose stands and in alternation with double red clover rows (2Rc 1Sb) for short purpose stands under similar conditions. N application could be eliminated in the grass–legume mixtures without any yield depression.     

Tillage,cover crops,and nitrogen fertilization effects on soil nitrogen and cotton and sorghum yields

Sustainable soil and crop management practices that reduce soil erosion and nitrogen (N) leaching, conserve soil organic matter, and optimize cotton and sorghum yields still remain a challenge. We examined the influence of three tillage practices (no-till, strip till and chisel till), four cover crops {legume [hairy vetch (Vicia villosa Roth)], nonlegume [rye (Secaele cereale L.)], vetch/rye biculture and winter weeds or no cover crop}, and three N fertilization rates (0, 60–65 and 120–130 kg N ha⁻¹) on soil inorganic N content at the 0–30 cm depth and yields and N uptake of cotton (Gossypium hirsutum L.) and sorghum [Sorghum bicolor (L.) Moench]. A field experiment was conducted on Dothan sandy loam (fine-loamy, siliceous, thermic, Plinthic Paleudults) from 1999 to 2002 in Georgia, USA. Nitrogen supplied by cover crops was greater with vetch and vetch/rye biculture than with rye and weeds. Soil inorganic N at the 0–10 and 10–30 cm depths increased with increasing N rate and were greater with vetch than with rye and weeds in April 2000 and 2002. Inorganic N at 0–10 cm was also greater with vetch than with rye in no-till, greater with vetch/rye than with rye and weeds in strip till, and greater with vetch than with rye and weeds in chisel till. In 2000, cotton lint yield and N uptake were greater in no-till with rye or 60 kg N ha⁻¹ than in other treatments, but biomass (stems + leaves) yield and N uptake were greater with vetch and vetch/rye than with rye or weeds, and greater with 60 and 120 than with 0 kg N ha⁻¹. In 2001, sorghum grain yield, biomass yield, and N uptake were greater in strip till and chisel till than in no-till, and greater in vetch and vetch/rye with or without N than in rye and weeds with 0 or 65 kg N ha⁻¹. In 2002, cotton lint yield and N uptake were greater in chisel till, rye and weeds with 0 or 60 kg N ha⁻¹ than in other treatments, but biomass N uptake was greater in vetch/rye with 60 kg N ha⁻¹ than in rye and weeds with 0 or 60 kg N ha⁻¹. Increased N supplied by hairy vetch or 120–130 kg N ha⁻¹ increased soil N availability, sorghum grain yield, cotton and sorghum biomass yields, and N uptake but decreased cotton lint yield and lint N uptake compared with rye, weeds or 0 kg N ha⁻¹. Cotton and sorghum yields and N uptake can be optimized and potentials for soil erosion and N leaching can be reduced by using conservation tillage, such as no-till or strip till, with vetch/rye biculture cover crop and 60–65 kg N ha⁻¹. The results can be applied in regions where cover crops can be grown in the winter to reduce soil erosion and N leaching and where tillage intensity and N fertilization rates can be minimized to reduce the costs of energy requirement for tillage and N fertilization while optimizing crop production.     

Performance and application of the APSIM Nwheat model in the Netherlands

APSIM Nwheat is a crop system simulation model, consisting of modules that incorporate aspects of soil water, nitrogen (N), crop residues, and crop growth and development. The model was applied to simulate above- and below-ground growth, grain yield, water and N uptake, and soil water and soil N of wheat crops in the Netherlands. Model outputs were compared with detailed measurements of field experiments from three locations with two different soil types. The experiments covered two seasons and a range of N-fertiliser applications. The overall APSIM Nwheat model simulations of soil mineral N, N uptake, shoot growth, phenology, kernels m⁻², specific grain weight and grain N were acceptable. Grain yields (dry weight) and grain protein concentrations were well simulated with a root mean square deviation (RMSD) of 0.8 t ha⁻¹ and 1.6 protein%, respectively. Additionally, the model simulations were compared with grain yields from a long-term winter wheat experiment with different N applications, two additional N experiments and regional grain yield records. The model reproduced the general effects of N treatments on yields. Simulations showed a good consistency with the higher yields of the long-term experiment, but overpredicted the lower yields. Simulations and earlier regional yields differed, but they showed uniformity for the last decade.In a simulation experiment, the APSIM Nwheat model was used with historical weather data to study the relationship between rate and timing of N fertiliser and grain yield, grain protein and soil residual N. A median grain yield of 4.5 t ha⁻¹ was achieved without applying fertiliser, utilising mineral soil N from previous seasons, from mineralisation and N deposition. Application of N fertiliser in February to increase soil mineral N to 140 kg N ha⁻¹ improved the median yield to 7.8 t ha⁻¹ but had little effect on grain protein concentration with a range of 8–10%. Nitrogen applications at tillering and the beginning of stem elongation further increased grain yield and in particular grain protein, but did not affect soil residual N, except in a year with low rainfall during stem elongation. A late N application at flag leaf stage increased grain protein content by several per cent. This increase had only a small effect on grain yield and did not increase soil residual N with up to 40 kg N ha⁻¹ applied, except when N uptake was limited by low rainfall in the period after the flag leaf stage. The economic and environmental optima in winter wheat were identified with up to 140 kg N ha⁻¹ in February, 90 kg N ha⁻¹ between tillering and beginning of stem elongation and 40 kg N ha⁻¹ at flag leaf stage resulting in a median of 8.5 t ha⁻¹ grain yield, 14.0% grain protein and 13 kg N ha⁻¹ soil residual N after the harvest. The maximum simulated yield with maximum N input from two locations in the Netherlands was 9.9 t ha⁻¹.     

Evaluation of cover-cropping managements on productivity and N-utilization efficiency of kenaf (Hibiscus cannabinus L.), under different nitrogen fertilization rates and soil types

Biomass productivity, nitrogen recovery fraction and nitrogen utilization efficiency (NUE) of kenaf (Hibiscus cannabinus L.) cultivar Tainung 2 were tested, under three Lens culinaries treatments (incorporated, harvested before the sowing of the energy crop and mono-cropping) and four nitrogen dressings (0, 50, 100 and 150 kg ha⁻¹), in two field experiments carried out on a fertile, clayey to loamy soil, and on a sandy soil of moderate fertility, in central Greece, over the period 2007–2009. The obtained results showed a positive response in L. culinaries cover cropping on kenaf total yield, on both experimental sites. Total dry biomass fluctuated from 16.07 to 21.46 t ha⁻¹ for incorporated plots and from 13.63 to 16.55 t ha⁻¹ for control treatments (relied only on applications of N-fertilization) for sandy soil, and from 14.98 to 19.28 t ha⁻¹ in case of legume incorporation and from 12.34 to 16.69 t ha⁻¹ for control plots, for clayey soil, respectively. The evaluated NUE was 76 kg kg⁻¹, for sandy soil, and 72 kg kg⁻¹, for clay soil. The recovery fraction escalated from 41% in control plots to 70% in plots with previous L. culinaries cultivation for sandy soil, while for clayey soil an increase of 20% was recorded, indicating a prominent effect of legume cover-cropping management.     

Growth and yield of winter wheat in the first 3 years of a monoculture under varying N fertilization in NW Germany

Different preceding crops interact with almost all husbandry and have a major effect on crop yields. In order to quantify the yield response of winter wheat, a field trial with different preceding crop combinations (oilseed rape (OSR)–OSR–OSR–wheat–wheat–wheat), two sowing dates (mid/end of September, mid/end of October) and 16 mineral nitrogen (N) treatments (80–320 kg N ha⁻¹) during 1993/1994–1998/1999, was carried out at Hohenschulen Experimental Station near Kiel in NW Germany. Single plant biomass, tiller numbers m⁻², biomass m⁻², grain yield and yield components at harvest were investigated. During the growing season, the incidence of root rot (Gaeumannomyces graminis) was observed. Additionally, a bioassay with Lemna minor was used to identify the presence of allelochemicals in the soil after different preceding crops.Averaged over all years and all other treatments, wheat following OSR achieved nearly 9.5 t ha⁻¹, whereas the second wheat crop following wheat yielded about 0.9 t ha⁻¹ and the third wheat crop following 2 years of wheat about 1.9 t ha⁻¹ less compared with wheat after OSR. A delay of the sowing date only marginally decreased grain yield by 0.2 t ha⁻¹. Nitrogen fertilization increased grain yield after all preceding crop combinations, but at different levels. Wheat grown after OSR reached its maximum yield of 9.7 t ha⁻¹ with 210 kg N ha⁻¹. The third wheat crop required a N amount of 270 kg N ha⁻¹ to achieve its yield maximum of 8.0 t ha⁻¹.Yield losses were mainly caused by a lower ear density and a reduced thousand grain weight. About 4 weeks after plant establishment, single wheat plants following OSR accumulated more biomass compared to plants grown after wheat. Plants from the third wheat crop were smallest. This range of the preceding crop combinations was similar at all sampling dates throughout the growing season.Root rot occurred only at a low level and was excluded to cause the yield losses. The Lemna bioassay suggested the presence of allelochemicals, which might have been one reason for the poor single plant development in autumn.An increased N fertilization compensated for the lower number of ears m⁻² and partly reduced the yield losses due to the unfavorable preceding crop combination. However, it was not possible to completely compensate for the detrimental influences of an unfavorable preceding crop on the grain yield of the subsequent wheat crop.     

Nitrogen and water-use efficiency of Australian wheat varieties released between 1958 and 2007

We used a collection of Australian wheats released between 1958 and 2007 to probe for time trends in evapotranspiration and nitrogen uptake, and the efficiencies in the use of water and nitrogen to produce grain yield. Yield increased linearly with year of cultivar release at a rate of 18 kg ha⁻¹ y⁻¹; this rate aligned with the relationship between rate of genetic gain and environmental yield from breeding programs worldwide. No time trend was apparent for seasonal evapotranspiration, hence the linear increase in yield per unit evapotranspiration with year of release which was fully accounted for by yield improvement. Under our experimental conditions, yield per unit transpiration of current varieties was ∼24 kg ha⁻¹ mm⁻¹, highlighting the need to update the 20 kg ha⁻¹ mm⁻¹ ratio commonly used in agronomic benchmarking.Yield per unit nitrogen uptake was largely unchanged as a consequence of increased nitrogen uptake that paralleled the increase in yield, and a secondary contribution of reduced grain protein concentration particularly under environmental conditions that favoured high protein. The nitrogen nutrition index, accounting for the effect of biomass on nitrogen uptake, increased linearly with year of cultivar release, hence supporting the conclusion that breeding for yield improved the nutrition status of wheat in association with an increased capacity to uptake nitrogen in equal-sized crops.     

Yield and nitrogen utilization efficiency of the pseudocereals amaranth,quinoa, and buckwheat under differing nitrogen fertilization

In recent years, the cultivation of the pseudocereal species amaranth, quinoa, and buckwheat has gained rising attention. This study was undertaken to explore nitrogen (N) fertility requirements and nitrogen use efficiency of these species. For this purpose, a 2-year field experiment with N rates of 0, 80, and 120 kg N ha⁻¹ for amaranth and quinoa and 0, 30, and 60 kg N ha⁻¹ for buckwheat and two cultivars of each species was conducted.Grain yield of amaranth responded to N and ranged between 1986 and 2767 kg ha⁻¹. Nitrogen utilization efficiency (NUtE) ranged from 13.9 to 15.4 kg grain yield per kg above-ground plant N and decreased with increasing N rate. Higher grain yields and NUtEs seemed to be mainly inhibited by the low harvest index (0.22–0.23) of the investigated amaranth cultivars.Quinoa yielded between 1790 and 3495 kg grain ha⁻¹ and responded strongly to N fertilization. NUtE averaged 22.2 kg kg⁻¹ and did not decrease with increasing N rates.The grain yield of buckwheat did not respond to N fertilization and averaged 1425 kg ha⁻¹. N uptake increased only slightly with N fertilization. NUtE ranged from 16.1 to 20.0 kg kg⁻¹. Main problems occurring with the application of N to buckwheat were grain scattering and lodging.     

Optimized single irrigation can achieve high corn yield and water use efficiency in the Corn Belt of Northeast China

Decreasing the corn (Zea mays L.) gap between the potential yield and farm yield and reducing the risk of grain yield of drought are very important for corn production in the Corn Belt of Northeast China (CBNC). To achieve a high and stable corn yield, the effects of supplementary irrigation on yield, water use efficiency (WUE) and irrigation water use efficiency (IWUE) were studied using a modelling approach. The Root Zone Water Quality Model 2 was parameterized and evaluated using two years of experimental data in aeolian sandy soil and black soil. The evaluated model was then used to investigate responses to various irrigation strategies (rainfed, full irrigation and 12 single irrigation scenarios) using long-term weather data from 1980 to 2012. Full irrigation guarantees a high and stable corn grain yield (12.92 Mg ha⁻¹ and has a coefficient of variation (CV) of 14.8% in aeolian sandy soil; 12.30 kg Ma⁻¹ and CV of 11.1% in black soil), but has a low water use efficiency (19.92 and 21.81 kg ha⁻¹ mm⁻¹) and a low irrigation water use efficiency (10.01 and 11.03 kg ha⁻¹ mm⁻¹). A single irrigation can increase corn yields by 3–35% for aeolian sandy soil and 5–35% for black soil over different irrigation dates compared with no irrigation. The most suitable single irrigation date was during late June to early July for aeolian sandy soil (yield = 10.73 Mg ha⁻¹ and WUE = 27.94 kg ha⁻¹ mm⁻¹) and early to mid-July for black soil (yield = 11.20 Mg ha⁻¹ and WUE = 27.70 kg ha⁻¹ mm⁻¹). The lowest yield risk of falling short of the yield goal of 8, 9, and 10 Mg ha⁻¹ were 9.1%, 18.2%, and 33.33% in aeolian sandy soil and 3.0%, 15.25, and 21.2% in black soil when an optimized single irrigation was applied in late June or early July, respectively. Therefore, an optimized single irrigation should be applied in late June to early July with the irrigation amount to refill soil water storage of root zone to field capacity in CBNC.     

White lupine as a beneficial crop in Southern Europe. II. Nitrogen recovery in a legume–oat rotation and a continuous oat–oat

One experiment lasting for two years was carried out at Pegões (central Portugal) to estimate the impact of mature white lupine residue (Lupinus albus L.) on yield of fodder oat (Avena sativa L. cv. Sta. Eulalia) as the next crop in rotation, comparing with the continuous cultivation of cereal, under two tillage practices (conventional tillage and no-till) and fertilized with five mineral nitrogen (N) rates, with three replicates. Oat as a first crop in the rotation provided more N to the agro-ecosystem (63 kg N ha⁻¹) than did lupine (30–59 kg N ha⁻¹). This was at a cost of 100 kg of mineral N ha⁻¹, whereas lupine was grown without addition of N. A positive response of oat as a second crop was obtained per kg of lupine-N added to the system when compared with the continuous oat–oat. The cereal also responded positively to mineral N in the legume amended soil in contrast with the oat–oat sequence where no response was observed, partly due to the fast mineralization rate of lupine residue and a greater soil N immobilization in the continuous oat system. Each kg N ha⁻¹ added to the soil through the application of 73 kg DM ha⁻¹ mature lupine residue (above- and belowground material) increased by 72 kg DM ha⁻¹ the oat biomass produced as the second crop in rotation when 150 kg mineral N ha⁻¹ were split in the season, independent of tillage practice. Mature legume residue conserved in the no-tilled soil depressed the yield of succeeding cereal but less than the continuous oat–oat for both tillage practices, where the application of mineral N did not improve the crop response.     

Effect of irrigation and nitrogen fertilization on the production of biogas from maize and sorghum in a water limited environment

The expansion of biogas production from anaerobic digestion in the Po Valley (Northern Italy) has stimulated the cultivation of dedicated biomass crops, and maize in particular. A mid-term experiment was carried out from 2006 to 2010 on a silt loamy soil in Northern Italy to compare water use and energy efficiency of maize and sorghum cultivation under rain fed and well-watered treatments and at two rates of nitrogen fertilization. The present work hypothesis were: (i) biomass sorghum, for its efficient use of water and nitrogen, could be a valuable alternative to maize for biogas production; (ii) reduction of irrigation level and (iii) application of low nitrogen fertilizer rate increase the efficiency of bioenergy production. Water treatments, a rain fed control (I0) and two irrigation levels (I1 and I2; only one in 2006 and 2009), were compared in a split–split plot design with four replicates. Two fertilizer rates were also tested: low (N1, 60 kg ha⁻¹ of nitrogen; 0 kg ha⁻¹ of nitrogen in 2010) and high (N2, 120 kg ha⁻¹ of nitrogen; 100 kg ha⁻¹ of nitrogen in 2010). Across treatments, sorghum produced more aboveground biomass than maize, respectively 21.6 Mg ha⁻¹ and 16.8 Mg ha⁻¹ (p < 0.01). In both species, biomass yield was lower in I0 than in I1 and I2 (p < 0.01), while I1 and I2 did differ significantly. Nitrogen level never affected biomass yield. Water use efficiency was generally higher in sorghum (52 kg ha⁻¹ mm⁻¹) than in maize (38 kg ha⁻¹ mm⁻¹); the significant interaction between crop and irrigation revealed that water use efficiency did not differ across water levels in sorghum, whereas it significantly increased from I0 and I1 to I2 in maize (p < 0.01). The potential methane production was similar in maize and sorghum, while it was significantly lower in I0 (16505 MJ ha⁻¹) than in I1 and I2 (21700 MJ ha⁻¹). The only significant effect of nitrogen fertilization was found in the calculation of energy efficiency (ratio of energy output and input) that was higher in N1 than in N2 (p < 0.01). These results support the hypothesis that (i) sorghum should be cultivated rather than maize to increase energy efficiency, (ii) irrigation level should replace up to 36% of ETr and (iii) nitrogen fertilizer rate should be minimized to maximize the efficiency in biomass production for anaerobic digestion in the Po Valley.     

Exploring options to combine high yields with high nitrogen use efficiencies in irrigated rice in China

In Jiangsu province, Southeast China, high irrigated rice yields (6–8000 kg ha⁻¹) are supported by high nitrogen (N) fertilizer inputs (260–300 kg N ha⁻¹) and low fertilizer N use efficiencies (recoveries of 30–35%). Improvement of fertilizer N use efficiency can increase farmers’ profitability and reduce negative environmental externalities. This paper combines field experimentation with simulation modeling to explore N fertilizer management strategies to realize high yields, while increasing N use efficiency. The rice growth model ORYZA2000 was parameterized and evaluated using data from field experiments carried out in Nanjing, China. ORYZA2000 satisfactorily simulated yield, crop biomass and crop N dynamics, and the model was applied to explore options for different N-fertilizer management regimes, at low and high levels of indigenous soil N supply, using 43 years of historical weather data.On average, yields of around 10–11,000 kg ha⁻¹ were realized (simulated and in field experiments) with fertilizer N rates of around 200 kg ha⁻¹. Higher fertilizer doses did not result in substantially higher yields, except under very favorable weather conditions when yields exceeding 13,000 kg ha⁻¹ were calculated. At fertilizer rates of 150–200 kg ha⁻¹, and at the tested indigenous soil N supplies of 0.6–0.9 kg ha⁻¹ day⁻¹, high fertilizer N recovery (53–56%), partial N productivity (50–70 kg kg⁻¹) and agronomic N use efficiency (20–30 kg kg⁻¹) were obtained with application in three equal splits at transplanting, panicle initiation and booting. Increasing the number of splits to six did not further increase yield or improve any of the N use efficiency parameters.     

Effects of plant density on grain yield,protein size distribution,and breadmaking quality of winter wheat grown under two nitrogen fertilisation rates

Nitrogen (N) and plant density are two crucial factors that affect winter wheat (Triticum aestivum L.) yield and quality, but little is known regarding the effects of interactions between these two factors on the amount and size distribution of protein fractions and quality traits. We grew the bread wheat cultivar Jinan17 in two successive seasons (2012–2013 and 2013–2014) at three densities of 120 plants m⁻² (low), 180 plants m⁻² [the usual rate for a multiple-spike cultivar with high tillering ability in the North China Plain (NCP)], and 240 plants m⁻² (high) and two levels of N fertilisation of 0 (low N availability treatment without N fertilisation) and 240 kg ha⁻¹ (the usual N rate for winter wheat production in the NCP) to evaluate the effect of N level × plant density interaction on grain yield, grain protein concentration, the amount and composition of protein fractions, dough development time, dough stability time, and loaf volume. The effect of plant density on Jinan 17 grain yield and quality differed between the two N levels. As plant density increased, all the parameters listed above decreased under 0 kg ha⁻¹ N fertilisation, but increased under 240 kg ha⁻¹ N fertilisation. Stepwise regression analysis showed that the dough rheological properties and breadmaking quality of Jinan 17 were affected by plant density under both N levels, primarily through changes in the polymerisation degree of glutenins in the flour.     

Energy balance of winter oilseed rape (Brassica napus L.) cropping as related to nitrogen supply and preceding crop

Data from a field experiment (1995–2000) conducted on a fertile sandy loess in the Hercynian dry region of central Germany were used to determine the energy efficiency of winter oilseed rape (Brassica napus L.) as affected by previous crop and nitrogen (N) fertilization. Depending on the previous crop, winter oilseed rate was cultivated in two different crop rotations: (1) winter barley (Hordeum vulgare L.)–winter oilseed rape–winter wheat (Triticum aestivum L.), and (2) pea (Pisum sativum L.)–winter oilseed rape–winter wheat. Fertilizer was applied to winter oilseed rape as either calcium ammonium nitrate (CAN) or cattle manure slurry. The N rates applied to winter oilseed rape corresponded to 0, 80, 160 and 240 kg N ha⁻¹ a⁻¹.Results revealed that different N management strategies influenced the energy balance of winter oilseed rape. Averaged across years, the input of energy to winter oilseed rape was highly variable ranging from 7.42 to 16.1 GJ ha⁻¹. Lowest energy input occurred when unfertilized winter oilseed rape followed winter barley, while the highest value was obtained when winter oilseed rape received 240 kg N ha⁻¹ organic fertilization and followed winter barley. The lowest energy output (174 GJ ha⁻¹), energy from seed and straw of winter oilseed rape, was observed when winter oilseed rape receiving 80 kg N ha⁻¹ as organic fertilizer followed winter barley. The energy output increased to 262 GJ ha⁻¹ for winter oilseed rape receiving 240 kg N ha⁻¹ as mineral fertilizer followed pea. The energy efficiency was determined using the parameters energy gain (net energy output), energy intensity (energy input per unit grain equivalent GE; term GE is used to express the contribution that crops make to the nutrition of monogastric beings), and output/input ratio. The most favourable N rate for maximizing energy gain (250 GJ ha⁻¹) was 240 kg N ha⁻¹, while that needed for minimum energy intensity (91.3 MJ GE⁻¹) was 80 kg N ha⁻¹ and for maximum output/input ratio (29.8) was 0 kg N ha⁻¹.     

Improved persistence of red clover (Trifolium pratense L.) increases the protein supplied by red clover/grass swards grown over four harvest years

UK livestock agriculture can significantly reduce its protein imports by increasing the amount of forage based protein grown on-farm. Forage legumes such as red clover (Trifolium pratense L.) produce high dry matter yields of quality forage but currently available varieties lack persistence, particularly under grazing. To assess the impact of red clover persistence on protein yield, diploid red clover populations selected for improved persistence were compared with a range of commercially available varieties. All populations were grown over four harvest years in mixed swards with either perennial ryegrass (Lolium perenne L.) or perennial plus hybrid ryegrass (L. boucheanum Kunth). Red clover and total sward dry matter (DM) herbage yields were measured in Years 1–4, red clover plant survival in Years 3 and 4 and herbage protein (CP) yield and concentration in Years 2 and 4. In general, red clover DM yield in year 4 (3.4 t ha⁻¹) was lower than in year 1 (13.9 t ha⁻¹) but the red clover populations differed in the extent of this decline. Differences in the persistence of the red clover populations in terms of plant survival and yield were reflected in the contribution of red clover to the total sward yield in Year 4, which ranged from 61% for the highest yielding population, AberClaret, to 11% in the lowest yielding, Vivi. Increased red clover DM yield was reflected in a greater CP yield (protein weight per unit area), which ranged from 1.6 t ha⁻¹ year⁻¹ to 2.9 t ha⁻¹ year⁻¹ in Year 2 and from 1.1 t ha⁻¹ year⁻¹ to 1.9 t ha⁻¹ year⁻¹ in Year 4. CP concentration (protein weight per unit herbage weight) of all of the red clover populations was within a range considered suitable for ruminant production. The implication of these results for the future use of red clover in sustainable grassland systems is discussed.     

Maize yield and water balance is affected by nitrogen application in a film-mulching ridge–furrow system in a semiarid region of China

Poor soil and drought stress are common in semiarid areas of China, but maize has a high demand for nitrogen (N) and water. Maize production using the technique of double ridges and furrows mulched with plastic film are being rapidly adopted due to significant increases in yield and water use efficiency (WUE) in these areas. This paper studied N use and water balance of maize crops under double ridges and furrows mulched with plastic-film systems in a semiarid environment over four growing seasons from 2007 to 2010. To improve precipitation storage in the non-growing season, the whole-year plastic-film mulching technique was used. There were six treatments which had 0, 70, 140, 280, 420 or 560 kg N ha⁻¹ applied in every year for maize. In April 2011, spring wheat was planted in flat plots without fertilizer or mulch following four years of maize cultivation. After four years, all treatments not only maintained soil water balance in the 0–200 cm soil layer but soil water content also increased in the 0–160 cm soil layer compared to values before maize sowing in April 2007. However, under similar precipitation and only one season of spring wheat, soil water content in the 0–160 cm soil layer sharply decreased in all treatments compared to values before sowing in April 2011. Over the four years of maize cultivation, average yield in all treatments ranged from 4071 to 6676 kg ha⁻¹ and WUE ranged from 18.2 to 28.2 kg ha⁻¹ mm⁻¹. In 2011, the yield of spring wheat in all treatments ranged from 763 to 1260 kg ha⁻¹ and WUE from 3.5 to 6.5 kg ha⁻¹ mm⁻¹. The potential maximum grain yield for maize was 6784 kg ha⁻¹ with 360 kg N ha⁻¹ applied for four years, but considerable NO₃N accumulated in the soil profile. A lesser application (110 kg N ha⁻¹) to this tillage system yielded in 82% of the maximum, increased nitrogen use efficiency and mitigated the risk of nitrogen loss from the system. This study suggests that double ridge–furrow and whole-year plastic-film mulching could sustain high grain yields in maize with approximately 110 kg N ha⁻¹ and maintain soil water balance when annual precipitation is >273 mm in this semiarid environment.     

Comparative assessment of maize,finger millet and sorghum for household food security in the face of increasing climatic risk

Questions as to which crop to grow, where, when and with what management, will be increasingly challenging for farmers in the face of a changing climate. The objective of this study was to evaluate emergence, yield and financial benefits of maize, finger millet and sorghum, planted at different dates and managed with variable soil nutrient inputs in order to develop adaptation options for stabilizing food production and income for smallholder households in the face of climate change and variability. Field experiments with maize, finger millet and sorghum were conducted in farmers’ fields in Makoni and Hwedza districts in eastern Zimbabwe for three seasons: 2009/10, 2010/11 and 2011/12. Three fertilization rates: high (90 kg N ha⁻¹, 26 kg P ha⁻¹, 7 t ha⁻¹ manure), low (35 kg N ha⁻¹, 14 kg P ha⁻¹, 3 t ha⁻¹ manure) and a control (zero fertilization); and three planting dates: early, normal and late, were compared. Crop emergence for the unfertilized finger millet and sorghum was <15% compared with >70% for the fertilized treatments. In contrast, the emergence for maize (a medium-maturity hybrid cultivar, SC635), was >80% regardless of the amount of fertilizer applied. Maize yield was greater than that of finger millet and sorghum, also in the season (2010/11) which had poor rainfall distribution. Maize yielded 5.4 t ha⁻¹ compared with 3.1 t ha⁻¹ for finger millet and 3.3 t ha⁻¹ for sorghum for the early plantings in the 2009/10 rainfall season in Makoni, a site with relatively fertile soils. In the poorer 2010/11 season, early planted maize yielded 2.4 t ha⁻¹, against 1.6 t ha⁻¹ for finger millet and 0.4 t ha⁻¹ for sorghum in Makoni. Similar yield trends were observed on the nutrient-depleted soils in Hwedza, although yields were less than those observed in Makoni. All crops yielded significantly more with increasing rates of fertilization when planting was done early or in what farmers considered the ‘normal window’. Crops planted early or during the normal planting window gave comparable yields that were greater than yields of late-planted crops. Water productivity for each crop planted early or during the normal window increased with increase in the amount of fertilizer applied, but differed between crop type. Maize had the highest water productivity (8.0 kg dry matter mm⁻¹ ha⁻¹) followed by sorghum (4.9 kg mm⁻¹ ha⁻¹) and then finger millet (4.6 kg mm⁻¹ ha⁻¹) when a high fertilizer rate was applied to the early-planted crop. Marginal rates of return for maize production were greater for the high fertilization rate (>50%) than for the low rate (<50%). However, the financial returns for finger millet were more attractive for the low fertilization rate (>100%) than for the high rate (<100%). Although maize yield was greater compared with finger millet, the latter had a higher content of calcium and can be stored for up to five years. The superiority of maize, in terms of yields, over finger millet and sorghum, suggests that the recommendation to substitute maize with small grains may not be a robust option for adaptation to increased temperatures and more frequent droughts likely to be experienced in Zimbabwe and other parts of southern Africa.     

Optimising crop production and nitrate leaching in China: Measured and simulated effects of straw incorporation and nitrogen fertilisation

The sustainability of growing a maize—winter wheat double crop rotation in the North China Plain (NCP) has been questioned due to its high nitrogen (N) fertiliser use and low N use efficiency. This paper presents field data and evaluation and application of the soil–vegetation–atmosphere transfer model Daisy for estimating crop production and nitrate leaching from silty loam fields in the NCP. The main objectives were to: i) calibrate and validate Daisy for the NCP pedo-climate and field management conditions, and ii) use the calibrated model and the field data in a multi-response analyses to optimise the N fertiliser rate for maize and winter wheat under different field managements including straw incorporation.The model sensitivity analysis indicated that a few measurable crop parameters impact the simulated yield, while most of the studied topsoil parameters affect the simulated nitrate leaching. The model evaluation was overall satisfactory, with root mean squared residuals (RMSR) for simulated aboveground biomass and nitrogen content at harvest, monthly evapotranspiration, annual drainage and nitrate leaching out of the root zone of, respectively, 0.9 Mg ha⁻¹, 20 kg N ha⁻¹, 30 mm, 10 mm and 10 kg N ha⁻¹ for the calibration, and 1.2 Mg ha⁻¹, 26 kg N ha⁻¹, 38 mm, 14 mm and 17 kg N ha⁻¹ for the validation. The values of mean absolute deviation, model efficiency and determination coefficient were also overall satisfactory, except for soil water dynamics, where the model was often found erratic. Re-validation run showed that the calibrated Daisy model was able to simulate long-term dynamics of crop grain yield and topsoil carbon content in a silty loam field in the NCP well, with respective RMSR of 1.7 and 1.6 Mg ha⁻¹. The analyses of the model and the field results showed that quadratic, Mitscherlich and linear-plateau statistical models may estimate different economic optimal N rates, underlining the importance of model choice for response analyses to avoid excess use of N fertiliser. The analyses further showed that an annual fertiliser rate of about 300 kg N ha⁻¹ (100 for maize and 200 for wheat) for the double crop rotation with straw incorporation is the most optimal in balancing crop production and nitrate leaching under the studied conditions, given the soil replenishment with N from straw mineralisation, atmospheric deposition and residual fertiliser.This work provides a sound reference for determining N fertiliser rates that are agro-environmentally optimal for similar and other cropping systems and regions in China and extends the application of the Daisy model to the analyses of complex agro-ecosystems and management practices under semi-arid climate.     

Long-term effects of lime and phosphogypsum application on tropical no-till soybean–oat–sorghum rotation and soil chemical properties

Root growth, nutrition and crop yield can be affected by soil chemical modifications caused by superficial limestone and phosphogypsum application in a no-till system. Using this approach, this study was conducted in southeastern Brazil, continuing an experiment that has been on-going since 2002 with the objective of evaluating the residual effects of the surface application of lime and phosphogypsum on the soil chemical characteristics and the root growth, nutrition and yield of soybean, black oat and sorghum in a dry winter region cultivated in 2008/2009 and 2009/2010. The experimental design was a randomized block with 4 replications. The treatments were applied in November 2004 and were as follows: original conditions, limestone application (2000 kg ha⁻¹), phosphogypsum application (2100 kg ha⁻¹), and limestone (2000 kg ha⁻¹) + phosphogypsum (2100 kg ha⁻¹) application. Superficial liming with or without phosphogypsum reduced the surface and subsurface soil acidity 5 years after application in the no-till system. The movement of Ca²⁺ and Mg²⁺ from the surface layer into the subsoil over time was evident. The phosphogypsum application associated with liming increased the Ca²⁺ levels throughout the soil profile. Liming maintained high levels of Mg²⁺ throughout the soil profile with or without phosphogypsum application. The organic matter content increased with liming with or without phosphogypsum, indicating that in the long term, these practices can increase the C accumulation. Phosphogypsum application had a residual effect on the SO₄-S levels, and high sulphate concentrations were observed in the subsoil after 5 years. Superficial liming improved crop nutrition and, when associated with phosphogypsum, increased Ca absorption by soybean and sorghum, as reflected in the increased yields of these crops.     

Wheat yield response to spatially variable nitrogen fertilizer in Mediterranean environment

Farmers obtain high yield when proper crop management is matched with favourable weather. Nitrogen (N) fertilization is an important agronomic management practice because it affects profitability and the environment. In rainfed environments, farmers generally apply uniform rates of N without taking into account the spatial variability of soil available water or nutrient availability. Uniform application of fertilizer can lead to over or under-fertilization, decreasing the efficiency of the fertilizer use. The objective of this study was to evaluate the impact of variable rate nitrogen fertilizer application on spatial and temporal patterns of wheat grain yield. The study was conducted during the 2008/2009 and 2009/10 growing seasons in a 12 ha field near Foggia, Italy. The crop planted each year was durum wheat (Triticum durum, Desf.) cultivar Duilio. The field was subdivided into two management zones High (H), and Average (A). Three N rates were identified using a crop model tested on the same field during a previous growing season. The N rates were: low N (T1: 30 kg N ha⁻¹), average N (T2: 70 kg N ha⁻¹), and high N (T3: 90 kg N ha⁻¹). The ANOVA test showed that there were no effects of the N levels for the first growing season for the H and A zone. For the 2009/10 growing season with higher rainfall there was a significant difference in grain yield for the A zone (2955 kg ha⁻¹), but not in the H zone (3970 kg ha⁻¹). This study demonstrates the optimal amount of N for a given management zone is not fixed but varies with the rainfall amount and distribution during the fallow and growing season.     

In field non-invasive sensing of the nitrogen status in hybrid bermudagrass (Cynodon dactylon × C. transvaalensis Burtt Davy) by a fluorescence-based method

The level of N fertilization and the content of leaf N in Cynodon dactylon × C. transvaalensis Burtt Davy cv. ‘Tifway 419’ bermudagrass were evaluated non-destructively with a fluorescence-based method. It was applied directly into the field by using the Multiplex portable fluorimeter during two consecutive seasons (2010 and 2011). In the 2010 experiment, the nitrogen balance index (NBI₁) provided by the sensor was able to discriminate (at P < 0.05) six different N levels applied, up to 250 kg ha⁻¹, with a precision (root mean square error, RMSE) in the rate estimate of 3.29 kg ha⁻¹. In 2011, the index was insensitive to the N treatment between 150 kg ha⁻¹ and 250 kg ha⁻¹ N rates, and its precision was 39.98 kg ha⁻¹. Calibration of the sensor by using the destructive analysis of turf samplings showed a good linear regression between NBI₁ and the leaf N content for both 2010 (R² = 0.81) and 2011 (R² = 0.93) experiments. This allowed mapping of the leaf N spatial distribution acquired by the sensor in the field with a prediction error of 0.21%. Averaging the overall estimates of leaf N content per N treatment provided an upper limit of 200 kg ha⁻¹ for the required fertilization, corresponding to a critical level of leaf N of about 2.3%. Our results confirm the usefulness of the new fluorescence-based method and sensor for a precise management of fertilization in turfgrass.