Genetic markers for the production of US country hams

The objective of this study was to determine the effect of candidate genes on processing quality traits of US country hams. A total of 321 fresh hams of unknown breed and sex were examined and data on quality and physical traits were collected. The hams were then processed following typical US commercial dry-curing procedures for ham and data on additional traits were collected from the cured hams. Several genes involved in biological processes affecting dry-cured ham production were selected. Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) tests were designed for each of the genes where polymorphisms were discovered and association analyses between each marker and the traits collected were performed. Results showed that two genetic markers were significantly associated with cured weight and yield: (i) a gene from the cathepsin family (cathepsin F) and (ii) the stearoyl-CoA desaturase (delta-9-desaturase) gene, involved in lipid metabolism. Moreover, markers that significantly affected colour traits and those having a significant impact on pH and lipid percentage were also identified. These markers could be used for screening and sorting of carcasses prior to ham processing and, eventually in pig improvement programmes designed to select animals possessing genotypes more suitable for the production of dry-cured hams.     

Computer image analysis for measuring lean and fatty areas in cross-sectioned dry-cured hams

The aims of this study were 1) to apply computer image analysis to obtain measures of lean and fatty areas on the cross section of dry-cured hams, 2) to investigate variation of these measures, and 3) to evaluate reproducibility and repeatability of these techniques. Traits of concern were the cross-sectional area (SA), lean, or muscles, area (LA), and the fatty area (FA) centered on the cross section and surrounded by biceps femoris, semimembranosus, semitendinosus, and quadriceps femoris, as well as the FA-to-SA ratio (FESR). Hams were obtained from crossbred pigs (n = 279) slaughtered at 9 mo of age (mean BW of 169 +/- 17 kg). Digital images of the cross section of dry-cured hams were captured using standardized procedures. Three replicated measures of areas were collected by three operators using three image analysis techniques (automatic, automatic-assisted, and manual). Variance components were estimated using a linear model that included slaughter group, gender, and gender x slaughter group as fixed effects and operators, pig, and operator x pig as random effects. Statistical analyses considered all measures (n = 7,533) or measures collected after reinstruction of all operators for spatial calibration of the analysis system (n = 4,428). Average SA, LA, FA, and FESR were 350 cm2, 220 cm2, 8.7 cm2, and 2.5%, respectively. Variability of FA (CV = 42%) and of FESR (CV = 39%) was four times greater than that of SA and LA. Slaughter group, pig, operator, and operator x pig effects were the most (P < 0.01) important sources of variation of measures. Correlations between measures obtained with different techniques were greater (P < 0.01) than 0.90, with the exception of LA measures. Coefficients of reproducibility for SA and LA ranged from 87 to 94%, whereas those for FA and FESR ranged from 88 to 98%. Coefficients of repeatability ranged from 92 to 99%. Automatic-assisted and manual methods provided more reproducible and repeatable measures than the automatic technique. Spatial calibration of the software system was a key issue affecting reproducibility and repeatability. Reinstructing the analysts for spatial calibration enhanced both reproducibility and repeatability of all methods of analysis. Computer image analysis is a technique suitable for measuring lean and fatty areas in cross-sectioned hams, providing reproducible and repeatable measures, and it might be used in large sample-based studies to investigate causes of defective fatty areas.     

Pork quality,processing, and sensory characteristics of dry-cured hams as influenced by Duroc crossing and sex

This study was designed to evaluate Duroc (DU) crossing for Carso dry-cured ham production. One hundred fifty-four pigs (81 females and 73 castrates) of four different genotypes, pure Landrace pigs (LAN), offspring of LAN females crossed with Large White (LW) males (LWxLAN), offspring of LAN females crossed with DU males (DUxLAN), and offspring of LWxLAN females crossed with DU males (DUx[LWxLAN]), were chosen in the weight range of 105 to 120 kg (112.7 +/- 0.4 kg). Raw material quality was evaluated for ham fatness (intra- and intermuscular and subcutaneous) and meat quality (pH, color, water-holding capacity) of longissimus dorsi, biceps femoris, and semimembranosus muscles. Ham weight losses were recorded at different stages of processing. The biceps femoris and semimembranosus muscles were analyzed for chemical composition before (lipid, moisture, total nitrogen, nonprotein nitrogen) and after (moisture, salt, total nitrogen, nonprotein nitrogen) processing. Chemical and sensory analyses were performed on 96 dry hams (12 castrates and 12 females per genotype). Biceps femoris and semimembranosus muscles were evaluated for color, saltiness, aroma, and texture. Pigs of the four genotypes had similar ham fatness as estimated by subcutaneous fat thickness. Duroc crosses exhibited higher intramuscular fat content, marbling, and intermuscular fat. Crossing with DU resulted in lower weight losses during ham processing. Castrates were fatter and had more intra- and intermuscular fat and lower ham processing weight losses than females. A strong negative relationship between ham fatness and ham processing losses was observed. Chemical and sensory traits of dry ham muscles were little affected by DU crossing. Lower salt content of biceps femoris was found in DU crosses. Dry hams from female pigs had higher total and nonprotein nitrogen, but drier, firmer texture and higher resistance to cutting force compared to dry hams from castrated pigs. Crossing with DU demonstrated some disadvantages (more intermuscular fat, more slice visible fat) and advantages (lower weight loss and salt intake) for the quality of dry-cured ham.     

The effects of sex and slaughter weight on growth performance and carcass traits of pigs intended for dry-cured ham from Teruel (Spain)

Crossbred pigs (n = 200) from Duroc sires mated to Landrace x Large White dams, with a mean BW of 107.0 +/- 2.4 kg and intended for highquality dry-cured hams (Teruel ham) from Spain, were used to investigate the effects of sex (barrows and gilts) and slaughter weight (SW; 120, 125, 130, 135, and 140 kg of BW) on growth performance and carcass characteristics. For productive performance, there were 5 treatments based on 5 SW; each treatment was replicated 4 times and the replicate was a pen made up of 5 barrows and 5 gilts allotted together. For carcass traits, there were 10 treatments based on 2 sexes and 5 SW; each treatment was replicated 20 times and the replicate was a carcass. Barrows had fatter carcasses (P < 0.001) and wider hams (P < 0.01) but a lower yield of trimmed shoulder (P < 0.05), loin (P < 0.001), and ham (P < 0.001) than gilts. Also, castrates tended to show a greater proportion of final suitable carcasses for Teruel ham (P < 0.10) than females because more barrows than gilts fulfilled the minimum requirement of carcass weight and fat thickness in the gluteus medius (GM) muscle (P < 0.01). An increase in SW tended to decrease ADG and G:F (P < 0.10). In addition, dressing percentage, fat, and dimensions of carcass and ham increased as SW increased (P < 0.001). Although the weight of trimmed primal cuts (shoulder, loin, and ham) increased with SW, the yield of trimmed loin or ham decreased (P < 0.01). The proportion of final suitable carcasses for Teruel ham improved as SW increased up to 130 kg of BW but not thereafter (P < 0.001) because of an increase in percentage carcasses that fulfilled the minimum carcass and ham weight (P < 0.001) and fat in GM (P < 0.05). We can conclude that barrows were better than gilts when intended for Teruel ham. Furthermore, an increase in SW up to 130 kg in pigs impaired growth performance but improved some aspects of carcass quality that are required by the Teruel ham industry.     

Effect of conjugated linoleic acid on meat quality,lipid metabolism,and sensory characteristics of dry-cured hams from heavy pigs

We investigated conjugated linoleic acid (CLA) supplementation administered to heavy pigs, assessing carcass characteristics, meat quality, and sensory characteristics of dry-cured (Parma) ham. Thirty-six pigs, averaging 97 kg BW, were assigned randomly to three feeding groups in which diets were supplemented with either 0, 0.25, or 0.5% (as-fed basis) of a CLA preparation containing 65% CLA isomers. All pigs were slaughtered at 172 kg BW. No (P > 0.05) differences were observed in dressing percentage, loin and ham weight, or pH and color of longissimus and semimembranosus muscle. Tenth-rib backfat thickness tended to be lower (P < 0.10) in carcasses from CLA-fed pigs. The oxidative stability of longissimus muscle was greater (P < 0.05) in pigs fed CLA than control, but only at the longer (300 min) oxidation time. Acetyl-CoA carboxylase activity in adipose tissue of CLA-fed pigs was less (P < 0.05) than that of pigs fed diets devoid of supplemental CLA. Composition of ham fat was markedly affected (P < 0.01) by dietary CLA, with higher saturated fatty acids, lower monounsaturated fatty acids, and higher CLA in the fat of CLA-fed pigs regardless of supplementation level. Although melting quality was improved (P < 0.05), most sensory characteristics and the chemical composition of dry-cured hams were not (P > 0.05) affected by incorporation of CLA. Results indicated that dietary CLA alters lipid metabolism, producing lower concentrations of monounsaturated fatty acids and increased concentrations of CLA isomers in the fat of heavy pigs. Moreover, supplementing diets with CLA produced only minimal improvements in Parma ham sensory traits and had no appreciable effects on fresh pork quality.     

Heritability of muscular cathepsin B activity in Italian Large White pigs

Previous studies suggested that proteolysis lasting for many months after slaughtering could be responsible for excessive softness in dry-cured hams. Also, the long-term activity of muscle proteinases is mainly attributed to cathepsin B. Should an additive genetic component exist for the activity level of cathepsin B, such information could be used as a selection criterion for improving meat quality for dry-cured ham production. Data on the growth rate, carcass composition, and meat quality of 234 Large White pigs raised in a test station under a &lsquo| quasi ad libitum ' nutritive level and slaughtered at around 160 kg live weight were analysed using a blup - mt -animal model. The cathepsin B activity level showed a moderate heritability (0.23–0.28) in all analyses, and negative genetic correlations with daily gain (− 0.34 to − 0.52) and backfat thickness (− 0.40 to − 0.86), but, with large standard errors. These results suggest that a genetic component exists in explaining the variability of the cathepsin B activity level. Further studies are necessary to confirm the outcome and to investigate genetic correlations with other traits currently under selection.     

The influence of dietary lysine restriction during the finishing period on growth performance and carcass, meat, and fat characteristics of barrows and gilts intended for dry-cured ham production

A total of 120 pigs [Duroc × (Landrace × Large White); initial average BW: 100.3 ± 2.5 kg] were used to investigate the effects of sex (barrows and gilts) and dietary total Lys restriction (7.0, 6.5, and 6.0 g·kg(-1)) on growth performance and carcass, meat, and fat characteristics. Pigs were intended for high-quality dry-cured ham from Spain (called Teruel ham), and a minimum fat thickness at the gluteus medius muscle (GM) is required (16 mm) for carcasses to be acceptable. Animals were slaughtered when they reached 129.0 ± 3.6 kg of BW. There were 6 treatments arranged factorially (2 sexes × 3 dietary Lys concentrations) and 4 replicates of 5 pigs per treatment. Barrows consumed more feed (P = 0.001) and tended to have less G:F (P = 0.06) than gilts. Carcasses from barrows were fatter (P = 0.001) and had heavier main trimmed lean cuts (P = 0.008) than gilts. A greater proportion of final acceptable carcasses for Teruel ham (P = 0.001) was observed in barrows than in gilts because of the greater percentage of carcasses that fulfill the minimum fat depth at GM required (P = 0.001). Meat from barrows had greater content of intramuscular fat (P = 0.02) than meat from gilts. Also, subcutaneous fat from barrows had less proportion of PUFA than fat from gilts (P = 0.02). A reduction in dietary Lys concentration decreased ADG (P = 0.004) and ADFI (P = 0.001) in pigs. In addition, backfat depth (P = 0.007) and fat at GM (P = 0.07) increased as dietary Lys decreased. The proportion of carcasses that fulfilled the minimum fat depth at GM required for Teruel ham increased as dietary Lys decreased in feed, but this effect was greater in gilts than in barrows (sex × Lys, P = 0.02). Meat and fat quality was not influenced by dietary treatment. We conclude that different feeding programs with different dietary Lys concentrations may be needed for barrows and gilts intended for production of dry-cured hams where a minimum carcass fat depth is required.     

Effect of age at slaughter on carcass traits and meat quality of Italian heavy pigs

Barrows and gilts (n = 128) from four breed crosses were used to investigate the effect of age at slaughter on carcass traits, proteolytic enzyme activity, and meat and fat quality. Pigs were blocked by breed cross into four blocks, and within blocks, one pen (eight barrows and eight gilts) was assigned randomly to be slaughtered at either 8 or 10 mo of age. Pigs were fed a corn-barley-soybean meal finisher diet from 104 +/- 2.5 d of age (37.7 +/- 0.33 kg BW) to the appropriate slaughter age. Carcasses from older (10 mo) pigs had lower (P < 0.01) muscularity indexes and lean cut yields than those of younger (8 mo) pigs, but dressing percentage and longissimus muscle area increased (P < 0.01) with age. Older pigs produced a redder (P < 0.01) and darker (P < 0.05) semimembranosus, with lower (P < 0.01) ultimate pH and cathepsin B and B + L activities, as well as higher (P < 0.01) aminopeptidase hydrolyzing activity than younger pigs. Moreover, the longissimus muscle of pigs slaughtered at 10 mo of age had lower (P < 0.01) drip and cooking loss percentages than that from pigs slaughtered at 8 mo of age. Ham subcutaneous fat from 10-mo-old pigs had greater (P < 0.05) percentages of oleic acid and lower (P < 0.01) proportions of moisture, linoleic, and linolenic acids than subcutaneous fat from pigs slaughtered at 8 mo of age. Results from this study indicate that fresh hams from pigs slaughtered at 10 mo of age would be more suitable for the production of high-quality, Italian, dry-cured hams.     

Genetic evaluation of carcass traits in Simmental-sired cattle at different slaughter end points

Our objectives were to estimate genetic parameters for carcass traits and evaluate the influence of slaughter end point on estimated breeding values (BV). Data provided by the American Simmental Association were divided into three sets: 1) 9,604 records of hot carcass weight (CW) and percentage retail cuts (PRC), 2) 6,429 records of CW, PRC, and marbling score (MS), and 3) 1,780 records of CW, PRC, MS, fat thickness (FT), and longissimus muscle area (LMA). Weaning weights (WW) from animals with carcass data and from their weaning contemporaries were used. Data were analyzed with a multiple-trait animal model and REML procedures to estimate genetic parameters and BV on an age-, CW-, MS-, or FT-constant basis. The model for carcass traits included fixed contemporary group and covariates for breed, heterozygosity, and slaughter end point and random additive direct genetic and residual effects. Weaning weight was preadjusted for founder effects, direct and maternal heterosis, age of dam, and age of calf. The model for WW included fixed contemporary group and random additive direct genetic, maternal genetic, maternal permanent environment, and residual effects. Heritabilities from data set 1 were 0.34 for CW and 0.25 for PRC on an age-constant basis and 0.25 for PRC on a CW end point. Heritabilities for data set 2 were 0.35, 0.24, and 0.36 for CW, PRC, and MS, respectively, on an age-constant basis. Data set 2 heritabilities were 0.25 for PRC and 0.34 for MS on a CW-constant basis and 0.33 for CW and 0.25 for PRC at a constant MS end point. Heritabilities on an age-constant basis for data set 3 were as follows: CW, 0.32; PRC, 0.09; MS, 0.12; FT, 0.10; and LMA, 0.26. Heritability estimates for data set 3 on a CW-, MS-, and FT-constant basis were similar to those on an age-constant basis. Heritabilities were 0.12 for PRC, 0.12 for MS, 0.14 for FT, and 0.22 for LMA on a CW-constant basis; 0.30 for CW, 0.09 for PRC, 0.10 for FT, and 0.28 for LMA at a constant MS end point; and 0.33, 0.17, 0.13, and 0.29 for CW, PRC, MS, LMA on a FT-constant basis. Genetic correlations among traits varied across groups and end points but suggested that it should be possible to select for improved lean yield without sacrificing quality grade. Correlations were calculated among BV computed at different end points. Adjustment to various end points resulted in some changes in BV and reranking of sires, especially for PRC; however, the number of records available had a larger influence than slaughter end point.     

Water requirements of liquid-fed heavy pigs: Effect of water restriction on growth traits,animal welfare and meat and ham quality

Reducing water waste, and therefore the total volume of manure produced, is one of the ways to lower the environmental impact of intensive pig farming. The aim of this trial was to verify whether the absence of additional fresh drinking water could compromise the production traits or behaviour of liquid-fed heavy pigs. Sixty animals (initial BW 78 kg) were divided into two experimental groups, both fed a liquid diet (water-to-feed ratio 3:1 w/w). All pens were equipped with nipple drinkers; one of the groups had permanent access to fresh water (working drinkers—WD), whereas the other group had no water supply except that delivered with food (dry drinkers—DD). The pigs were housed in temperature- and humidity-controlled rooms. They were brought to a weight of 160 kg and then slaughtered. Hams were dry-cured according to the directives for Parma ham production. No significant differences (P>0.05) were observed between the experimental groups with respect to growth parameters (ADG and FCR), behavioural traits, blood parameters or the qualitative traits of carcasses (dressing out, lean meat yield, backfat thickness), meat (pH, colour, WHC, fatty acid composition of subcutaneous fat and tenderness) and cured hams (weight losses, sensory properties, chemical composition and oxidative status). With respect to drinking behaviour, a low number of visits to the drinker were recorded for both groups and data seem to indicate a high amount of water wasted by pigs provided with additional water delivery by nipple drinkers. Liquid feeding did not suppress drinkers use or drinker manipulation in both groups.     

Formation of zinc protoporphyrin IX in Parma-like ham without nitrate or nitrite

Zinc protoporphyrin IX (ZPP) is a characteristic red pigment in meat products that are manufactured without the addition of a curing agent such as nitrate or nitrite. To examine the effects of impurities such as mineral components in sea salt on the formation of ZPP, we manufactured Parmatype dry-cured hams that were salted with refined salt or sea salt and examined the involvement of oxidation-reduction potential (ORP) in the formation of ZPP. The content of ZPP was increased drastically after 40 weeks. Microscopic observation showed strong fluorescence caused by ZPP muscle fiber after 40 weeks. Conversely, heme content varied considerably during processing. ORP increased during processing. However, there was no obvious difference between ham salted with refined salt and that salted with sea salt. Therefore, it was concluded that impurities in sea salt were not involved in the formation of ZPP.     

Thermal inactivation of hog cholera virus in ham.

Experiments were conducted to determine the temperatures required to inactivate hog cholera virus (HCV) in fresh ham after 1 minute and in cured and processed (canned) ham after 90 minutes. A momentary or "flash" temperature of 71 C for 1 minute caused inactivation of the virus in 15 of 15 cubes (2 cm3) of ham. Hog cholera virus was destroyed in 21 of 21 canned hams (weighing 0.91 kg each) when an internal temperature of 65 C was sustained for 90 minutes. Pigs were found to be more sensitive than tissue culture cells for detecting viable HCV in heat-processed fresh hams. Virus was isolated by tissue culture technique only from those hams exposed to temperatures below 61 C. The relative concentration of HCV in unheated cured hams of experimentally infected pigs varied over a wide range; these pigs were inoculated with the virulent Ames strain and were killed on postinfection day 6 or 7.     

Genetic correlation between boars, barrows and gilts for various carcass traits

Data from 11 generations of a selection study were analyzed to estimate genetic correlations between boars and gilts, boars and barrows, and gilts and barrows for carcass traits in the Lacombe and Yorkshire breeds of swine. Genetic correlations were estimated to determine if genotype X sex interactions existed and to assess the need for separate genetic parameters for boars and gilts in selection response equations. Genotype X sex interactions were found for total carcass fat/kg of cold carcass weight, area of lean in the ham face/kg of cold carcass weight and percent lean in the ham face/kg of cold carcass weight. Carcass length, longissimus muscle area/kg of cold carcass weight percent ham of side and percent lean in the ham face did not have genotype X sex interactions. Selection based on pooled genetic parameters over sex were favored over selection based on separate genetic parameters regardless of the presence or absence of genotype X sex interactions.     

Additive and nonadditive differences in postweaning growth and carcass characteristics of Devon, Hereford, and reciprocal-cross steers.

Postweaning growth and carcass characters of 110 steers from a complete two-breed diallel of the Devon and Hereford breeds were examined under two environments. Additive and nonadditive effects were estimated using linear contrasts for several growth and carcass traits. Steers from each of the four breed groups were grown postweaning to slaughter in high- and low-nutrition environments. Weights were recorded every 2 mo. At slaughter, hot carcass weight, longissimus muscle area, kidney and channel fat, and subcutaneous fat at nine sites were measured. Heterosis for postweaning growth rate was 3.9% (P less than .01) and for slaughter weight 5.0% (P less than .01). Within the low-nutrition environment during periods of slow and fast growth, the Devons and Herefords performed differently. The growth rate of the steers differed in the two environments; however, heterosis for slaughter weight was of the same magnitude in both environments. No differences existed between the straightbreds or between the reciprocal crosses for slaughter weight. Crossbred carcasses were 7.4% heavier (P less than .01) than the straightbred carcasses; however, this effect was removed after adjustment for differences in slaughter weight. Heterosis for longissimus muscle area and carcass fatness were not significant after adjusting for carcass weight. Additive differences occurred for carcass traits. Devon carcasses had more kidney and channel fat (P less than .05) at a constant hot carcass weight and differences occurred in the partitioning of fat within the subcutaneous depot. No significant maternal effects were observed for the carcass traits measured. Crossbreeding increased carcass weight without altering composition, and relative performance was not affected by the diverse environments.     

The prediction of percentage of fat in pork carcasses

Forty-seven market-weight pigs were slaughtered in order to determine percentage of chemical fat and in an attempt to determine an easily obtainable and inexpensive method to predict this value. The hams and 8-9-10 rib loin sections were removed from the left side of each carcass and dissected into subcutaneous and seam fat, individual muscles, skin and bone. Weights and chemical analysis were determined for each component. Numerous weights, measurements and specific gravity were determined on the carcass, ham and loin section of each pig. Percentage of chemical fat of each ham, loin section and carcasses was determined and correlated with the various weights and measurements taken. Stepwise regression was used to develop prediction equations using carcass data, specific gravity, ham or loin measurements or various combinations of these as dependent variables. The single best indicator of the decimal fraction of chemical fat in the pork carcass was determined to be specific gravity of the carcass half, the prediction equation using this variable had an R-square of .64. By adding 10th rib fat thickness to this equation, the R-square increased to .72. The best equation using carcass variables included 10th rib fat and marbling (R-square = .67). The loin section proved to be an accurate indicator of composition; ham measures were not as accurate as specific gravity and carcass measurements for predicting percentage of carcass fat. This research suggests that the percentage of chemical fat in the pork carcass can be predicted by an easy and inexpensive means.     

Tissue weights and body composition of two genetic lines of barrows and gilts from twenty to one hundred twenty-five kilograms of body weight

Barrows and gilts of 2 genetic lines with differing lean gain potentials (high-lean = 375 g of fat-free lean/d; low-lean = 280 g of fat-free lean/d) were used to determine tissue and organ weights and compositions from 20 to 125 kg of BW. The experiment was a 2 (genetic line) x 2 (sex) x 5 (BW) factorial arrangement of treatments in a completely randomized design conducted with 2 groups of pigs in 6 replicates (n = 120 pigs). Six pigs from each sex and genetic line were slaughtered at 20 kg of BW and at 25 kg of BW intervals to 125 kg of BW. At slaughter, the internal tissues and organs were weighed. Loin and ham muscles were dissected from the carcass and trimmed of skin and external fat, and the ham was deboned. Residuals from the loin and ham were combined with the remaining carcass. Body components were ground, and their compositions were determined. The results demonstrated that tissue weights increased (P < 0.01) as BW increased. Loin and ham muscle weights increased but at a greater rate in the high-lean line and in gilts resulting in genetic line x BW and sex x BW interactions (P < 0.01). Liver and heart expressed on a BW or a percentage of empty BW basis increased at a greater rate in the high-lean line resulting in a genetic line x BW interaction (P < 0.01). Liver and intestinal tract weights were heavier in barrows than in gilts, significant only at 45 (P < 0.05), 75 (P < 0.01), and 100 (P < 0.05) kg of BW. Loin and ham muscles from the high-lean genetic line and gilts had greater (P < 0.01) water, protein, and ash contents compared with the low-lean genetic line and barrows resulting in genetic line x BW and sex x BW interactions (P < 0.01). The remaining carcass (minus loin and ham muscles) had greater (P < 0.01) amounts of water and protein, and less (P < 0.01) fat in the high-lean genetic line and gilts. The high-lean genetic line and gilts had more total body water, protein, and ash, but less body fat, with these differences diverging as BW increased, resulting in a genetic line x BW interaction (P < 0.01). The results indicated that liver and heart weights were greater in high-lean pigs, reflecting the greater amino acid metabolism, whereas the liver and intestinal tract weights were greater in barrow than gilts, reflecting their greater feed intakes and metabolism of total nutrients consumed.     

Survival analysis of preweaning piglet survival in a dry-cured ham-producing crossbred line

The aim of this study was to investigate piglet preweaning survival and its relationship with a total merit index (TMI) used for selection of Large White terminal boars for dry-cured ham production. Data on 13,924 crossbred piglets (1,347 litters), originated by 189 Large White boars and 328 Large White-derived crossbred sows, were analyzed under a frailty proportional hazards model, assuming different baseline hazard functions and including sire and nursed litter as random effects. Estimated hazard ratios (HR) indicated that sex, cross-fostering, year-month of birth, parity of the nurse sow, size of the nursed litter, and class of TMI were significant effects for piglet preweaning survival. Female piglets had less risk of dying than males (HR = 0.81), as well as cross-fostered piglets (HR = 0.60). Survival increased when piglets were nursed by sows of third (HR = 0.85), fourth (HR = 0.76), and fifth (HR = 0.79) parity in comparison with first and second parity sows. Piglets of small (HR = 3.90) or very large litters (HR >1.60) had less chance of surviving in comparison with litters of intermediate size. Class of TMI exhibited an unfavorable relationship with survival (HR = 1.20 for the TMI top class). The modal estimates of sire variance under different baseline hazard functions were 0.06, whereas the variance for the nursed litter was close to 0.7. The estimate of the nursed litter effect variance was greater than that of the sire, which shows the importance of the common environment generated by the nurse sow. Relationships between sire rankings obtained from different survival models were high. The heritability estimate in equivalent scale was low and reached a value of 0.03. Nevertheless, the exploitable genetic variation for this trait justifies the inclusion of piglet preweaning survival in the current breeding program for selection of Large White terminal boars for dry-cured ham production.     

Estimated genetic parameters for carcass traits of Brahman cattle

Heritabilities and genetic and phenotypic correlations were estimated from feedlot and carcass data collected from Brahman calves (n = 504) in central Florida from 1996 to 2000. Data were analyzed using animal models in MTDFREML. Models included contemporary group (n = 44; groups of calves of the same sex, fed in the same pen, slaughtered on the same day) as a fixed effect and calf age in days at slaughter as a continuous variable. Estimated feedlot trait heritabilities were 0.64, 0.67, 0.47, and 0.26 for ADG, hip height at slaughter, slaughter weight, and shrink. The USDA yield grade estimated heritability was 0.71; heritabilities for component traits of yield grade, including hot carcass weight, adjusted 12th rib backfat thickness, loin muscle area, and percentage kidney, pelvic, and heart fat were 0.55, 0.63, 0.44, and 0.46, respectively. Heritability estimates for dressing percentage, marbling score, USDA quality grade, cutability, retail yield, and carcass hump height were 0.77, 0.44, 0.47, 0.71, 0.5, and 0.54, respectively. Estimated genetic correlations of adjusted 12th rib backfat thickness with ADG, slaughter weight, marbling score, percentage kidney, pelvic, and heart fat, and yield grade (0.49, 0.46, 0.56, 0.63, and 0.93, respectively) were generally larger than most literature estimates. Estimated genetic correlations of marbling score with ADG, percentage shrink, loin muscle area, percentage kidney, pelvic, and heart fat, USDA yield grade, cutability, retail yield, and carcass hump height were 0.28, 0.49, 0.44, 0.27, 0.45, -0.43, 0.27, and 0.43, respectively. Results indicate that sufficient genetic variation exists within the Brahman breed for design and implementation of effective selection programs for important carcass quality and yield traits.     

Genetic parameters for carcass composition and pork quality estimated in a commercial production chain

Breeding goals in pigs are subject to change and are directed much more toward retail carcass yield and meat quality because of the high economic value of these traits. The objective of this study was to estimate genetic parameters of growth, carcass, and meat quality traits. Carcass components included ham and loin weights as primal cuts, which were further dissected into boneless subprimal cuts. Meat quality traits included pH, drip loss, purge, firmness, and color and marbling of both ham and loin. Phenotypic measurements were collected on a commercial crossbred pig population (n = 1,855). Genetic parameters were estimated using REML procedures applied to a bivariate animal model. Heritability estimates for carcass traits varied from 0.29 to 0.51, with 0.39 and 0.51 for the boneless subprimals of ham and loin, respectively. Heritability estimates for meat quality traits ranged from 0.08 to 0.28, with low estimates for the water holding capacity traits and higher values for the color traits: Minolta b*(0.14), L* (0.15), a* (0.24), and Japanese color scale (0.25). Heritability estimates differed for marbling of ham (0.14) and loin (0.31). Neither backfat nor ADG was correlated with loin depth (r(g) = 0.0), and their mutual genetic correlation was 0.27. Loin primal was moderately correlated with ham primal (r(g) = 0.31) and more strongly correlated with boneless ham (r(g) = 0.58). Backfat was negatively correlated with (sub)primal cut values. Average daily gain was unfavorably correlated with subprimals and with most meat quality characteristics measured. Genetic correlations among the color measurements and water-holding capacity traits were high (average r(g) = 0.70), except for Minolta a* (average r(g) = 0.17). The estimated genetic parameters indicate that meat quality and valuable cut yields can be improved by genetic selection. The estimated genetic parameters make it possible to predict the response to selection on performance, carcass, and meat quality traits and to design an effective breeding strategy fitting pricing systems based on retail carcass and quality characteristics.     

The prediction of percentage of protein in pork carcasses

Determination of percentage of protein in a pork carcass is a very costly and lengthy process. Therefore, we attempted to identify an easy and economical means to predict protein content of pork carcasses. Forty-seven market-weight pigs were slaughtered. The right side of each carcass was skinned, deboned and ground for composition analysis. Carcass data were collected on the left side and specific gravity analysis was performed on the side, ham and 8-9-10 rib loin section of each carcass. The hams and loin sections were dissected into skin, bone, subcutaneous fat, seam fat and individual muscles. After these components were weighted, they were analyzed for chemical composition. Percentage of chemical protein of each animal was determined and correlated with each of the weights and measurements taken on the carcass, ham and loin sections. Stepwise regression was used to predict decimal fraction of protein using either the carcass data, specific gravity ham measurements, loin section measurements or various combinations of these. In prediction equation, specific gravity of the carcass accounted for 73.4% of the variation found in percentage of protein. Prediction equations using indicators from the ham and loin section resulted in equations with R-square values as high as .783. These results suggest that specific gravity or indicators from the carcass, ham or loin section can be employed to predict percentage of protein in pork carcasses.