Micromorphological characteristics of decayed wood and laccase produced by the brown-rot fungus <Emphasis Type="Italic">Coniophora puteana</Emphasis>

Microscopic examination showed the cell wall decay pattern produced by the brown-rot fungus Coniophora puteana to be different from the degradation pattern known to be typical for brown-rot fungi. Erosion and thinning of cell walls in patterns considered to be characteristic of white-rot decay were observed. In particular, the fungal strain COP 20242 degraded secondary cell wall layers extensively, and also degraded lignin-rich middle lamellae. Some strains of C. puteana produced soft-rot type cavities in the S2 layer. All strains of C. puteana employed in the present work showed a positive reaction to tannic acid in the Bavendamm test, indicating the production of laccase. Microscopic and enzymatic studies provided evidence to suggest that the wood decay by C. puteana is unique both in terms of micromorphological and enzymatic patterns of cell wall degradation. This is because brown-rot fungi are not generally known to form cavities in the cell walls or to produce lignin-degrading enzymes. These observations suggest that lignin degradation capacity of brown-rot fungi may be greater than previously considered.     

Surface deterioration of moso bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) induced by exposure to artificial sunlight

The effect of ultraviolet-visible light irradiation on changes in surface chemistry and morphology of moso bamboo (Phyllostachys pubescens Mazel) was investigated. Fourier transform infrared (FT-IR) and FT-Raman spectroscopy were used in combination to study chemical changes induced by exposure to artificial sunlight (xenon lamp) for up to 160 h, and the resulting physical changes of cell walls of bamboo surfaces were examined by scanning electron microscopy (SEM). FT-IR results showed that significant changes occurred in the lignin component as indicated by considerable decreases in the intensities of the characteristic aromatic lignin peak at 1512 cm⁻¹ and other associated bands. This was accompanied by formation of new carbonyl groups at 1735 cm⁻¹, resulting in photooxidation of bamboo surfaces. The photosensitive nature of bamboo lignin was also demonstrated by FT-Raman analysis, in which obvious decreases in intensities of Raman bands at 1604 and 1630 cm⁻¹ mainly derived from lignin and free and esterified p-coumaric and ferulic acids were observed. SEM micrographs of the irradiated cross sections of bamboo revealed that significant damage occurred to the fiber walls, whereas the parenchyma cells exhibited slight distortion and some cracks occurred in the cell walls. The structures of cell corners and middle lamellae were nearly intact after irradiation.     

Reaction wood anatomy and lignin distribution in <Emphasis Type="Italic">Gnetum gnemon</Emphasis> branches

This study investigated the anatomical and chemical characteristics of the reaction wood of a gymnpsperm species, Gnetum gnemon, and discussed on contributing factor for the type of reaction wood in this species. Cell morphology, microfibril angle (MFA) of the S₂ layer and lignin distribution in secondary walls of tracheary elements, and lignin content were examined on three branches. Observations included no G-layer formation, significant decreases in vessel frequency, and altered MFA, and visible-light absorbance after lignin colour reactions in tracheid and fiber tracheid walls on the upper side in almost all samples. These results suggest that reaction wood in G. gnemon was similar to that in ‘tension-wood-like-reaction wood’ in angiosperms. On the other hand, reaction wood showed decrease in the lignin concentration in the fiber tracheid walls compared to the tracheid walls. In addition, the lignin in the tracheid and fiber tracheid walls was originally rich in syringyl units, suggesting that changes in the anatomical and chemical characteristics of secondary xylem due to reaction wood formation might relate to the ratio of the syringyl to guaiacyl units in lignin in the cell walls which function for mechanical support.     

Lignification in developing culms of bamboo <Emphasis Type="Italic">Sinobambusa tootsik</Emphasis>

Bamboos are among the largest woody grasses and grow very rapidly. Although lignin is a crucial factor for the utilization of bamboo biomass, the lignification mechanism of bamboo shoots is poorly understood. We studied lignification in the bamboo Sinobambusa tootsik during culm development. Elongation growth began in May and ended in late-June, when the lignin content was approximately half that in mature culms. Thioacidolysis analysis indicated that p-hydroxyphenyl units in lignin formed even at late stages of lignification. The syringyl/guaiacyl ratio varied during culm development. Various lignin precursors were detected in developing culms by liquid chromatography–mass spectrometry. The ferulic acid content decreased from May to June, indicating that ferulic acid was utilized in early stages of cell wall formation. Monolignol glucosides were detected at early stages of lignification, whereas the contents of monolignols, coniferaldehyde, sinapaldehyde, p-coumaric acid, and ferulic acid peaked at later stages of lignification. Therefore, lignin precursors may be supplied differentially during the lignification process. In August, the rate of lignification decreased, although the contents of various lignin precursors peaked, implying that the rate-limiting step in the cessation of lignification in bamboo is transport or polymerization of lignin precursors, rather than their biosynthesis.     

Environmentally benign methods for producing green culms of ma bamboo (<Emphasis Type="Italic">Dendrocalamus latiflorus</Emphasis>) and moso bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>)

The objective of this study was to find an effective method for treating ma bamboo (Dendrocalamus latiflorus) and moso bamboo (Phyllostachys pubescens) using new water-based reagents containing copper. The effects of green-color protection using various treatments on bamboo culms were examined in this study. Two methods were used: heating in a water bath and ultrasonic dipping. The results revealed that excellent green-color protection (a* value of −6.2) was obtained when ma bamboo culms were treated with 0.25% ammoniacal copper quaternary compound-type B (ACQ-B) in a water bath at 100°C for 2 h. It was also found that the wettability of bamboo epidermis increasedsignificantly after pretreatment in a mixture of 1% KOH and surfactant in a water bath at 100°C for 30 min. Furthermore, pretreated moso bamboo culms exhibited excellent green-color protection after they were treated with 0.25% ACQ-B at 100°C for 2 h (a* value of −8.2). This novel treatment method definitely endows the bamboo culms with a fascinating green skin color and consequently could increase the economic value of bamboo products. No improvement in green-color protection was found when ultrasonic energy was added to the water bath at ambient temperature.     

Non-destructive assessment of <Emphasis Type="Italic">Pinus</Emphasis> spp. wafers subjected to <Emphasis Type="Italic">Gloeophyllum trabeum</Emphasis> in soil block decay tests by diffuse reflectance near infrared spectroscopy

The use of calibrated near infrared (NIR) spectroscopy for measuring and predicting the advancement of wood decay in Pinus spp. sapwood wafers that were subjected to Gloeophyllum trabeum for periods ranging from 1 to 10 days was investigated. NIR spectra were obtained from the center of the cross-sectional face of each sample before and after decay tests. Mass loss and compression tests were also used to measure the progression of decay. Calibrations were created from NIR spectra, mass loss, and compression strength data using untreated and mathematically treated (multiplicative scatter correction and first and second derivative) spectra. Strong relationships were derived from the calibrations with the strongest R ² values being 0.98 (mass loss) and 0.97 (compression strength). Calibrations for mass loss showed the strongest statistics for predicting wood decay of a separate test set (0.85 raw, second derivative to 0.76 multiplicative scatter correction (MSC), while predictions for compression strength of the decayed samples resulted in R ² of 0.69 (raw) to 0.54 (MSC). Calibrations created from the amount of time the samples were decayed showed strong statistics, indicating that NIR spectroscopy can predict the early stages of wood decay.     

At5g54160 gene encodes <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> 5-hydroxyconiferaldehyde <Emphasis Type="Italic">O</Emphasis>-methyltransferase

The function of an Arabidopsis thaliana gene, At5g54160 annotated as a caffeic acid O-methyltransferase CAOMT gene was characterized. The recombinant enzyme of this gene (AtOMT1) catalyzed the O-methylation of phenylpropanoid and flavonoid substrates. The specificity constants (k _cat/K _m) for 5-hydroxyconiferaldehyde (5-HCAld) and quercetin were both 0.11 μM⁻¹·min⁻¹. On the other hand, lignins of At5g54160-knockout Arabidopsis mutants lacked syringyl units. In addition, we showed that the gene silencing also resulted in significant accumulation of caffeyl alcohol (CaAlc). These results strongly suggested that At5g54160 gene is involved in syringyl lignin synthesis for the methylation of both 5-hydroxyconiferaldehyde and 3,4-dihydroxyphenyl compound(s). Part of this work was presented at the Annual Meeting of Japan Society for Bioscience, Biotechnology, and Agrochemistry, March 24–27, 2007     

Delignification of cell walls of <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> during alkaline nitrobenzene oxidation

To clarify the behavior of whole lignins in wood cell walls during alkaline nitrobenzene oxidation, the delignification process from cell walls in normal and compression woods of Chamaecyparis obtusa Endl. (Cupressaceae) was observed using ultraviolet and transmission electron microscopies. The lignin content conspicuously decreased to around 10% after 35min in normal wood. The lignin content in compression wood finally leveled off at aroumd 10% after 50min. In gel filtration of oxidation products in ethyl acetate, a high molecular weight fraction was prominent in extracts from the early stage of the reaction. As the oxidation progressed, the high molecular weight fraction became less prominent in both normal and compression wood. Changes in the weights of cell wall residues during reaction indicated that approximately half of the components other than lignin were also removed from the cell walls. This shows that the majority of lignin with relatively high molecular weight is removed from the cell walls together with polysaccharides in the early stage of the reaction and that further oxidative degradation occurs in solution in later stages. Only a small amount of the lignin with low molecular weight could be analyzed by gas chromatography.Parts of this report were presented at the 47th (Kochi, April 1997) and 48th (Shizuoka, April 1998) Annual Meetings of the Japan Wood Research Society, and at the Lignin Symposium, Sapporo, October 1997     

Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms (<Emphasis Type="Italic">Phyllostachys makinoi</Emphasis> and <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>)

Epidermal peeling (EPT) and steam-heating (SHT) treatments are two widely processing methods in bamboo industry. Moso bamboo (Phyllostachys pubescens Mazel) and makino bamboo (Phyllostachys makinoi Hayata) are important economical bamboo species in Taiwan and China. The subject of this study was to access the changes of chemical and mechanical properties in moso and makino bamboo culms, which were collected from Taiwan and China after EPT and SHT. As regard to chemical properties, the amounts of extractives and ash were increased both in moso and makino bamboos after EPT and SHT. In contrast, the contains of holocellulose and α-cellulose were decreased after EPT and SHT for two bamboos. Moso bamboo collected from China contained the lowest cellulose content but the highest amount of hemicellulose by SHT. The lignin contents of all samples were no significant different after SHT, and it might due to the structure of lignin did not destroy at 120 °C. For the mechanical properties, the density of all makino and moso bamboo samples was reduced after SHT; moreover, the decreasing trend of density was similar to the reducing of holocellulose, α-cellulose, hemicellulose, and equilibrium moisture content (EMC). All bamboo samples without EPT presented the highest modulus of elasticity (MOE) and modulus of rupture (MOR) whether SHT or not. Both MOE and MOR of all bamboo samples were decreased after SHT. The integrity of the bamboo skin is important for the dimensional stability of the bamboo, and the water absorption ability would be increased after EPT; however, SHT decreased the water absorption of bamboo.     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Fracture in Norway spruce wood treated with <Emphasis Type="Italic">Physisporinus vitreus</Emphasis>

Changes in the fracture behaviour of Norway spruce tonewood after fungal treatment were studied. Specimens were incubated for 6, 9 and 12 months with Physisporinus (P.) vitreus. Fracture tests were performed in a compact-tension fracture experiment set-up, and the results were compared with the morphological analysis of the degraded wood structure and transverse sections of the crack tip viewed under light and fluorescence microscopy. It was evident that both the failure load and critical stress intensity factors were reduced in wood after prolonged incubation periods. Weight losses were significantly higher in sapwood than in heartwood. With prolonged incubation periods, the frequency of unstable fracture and brittle behaviour of the wood increased. In untreated wood, cracks were initiated in the earlywood. The process involved both delamination of the cells within the middle lamellae and rupture of the cell walls, inducing a zigzag crack tip pattern. In fungally treated wood, cracks often commenced from the intersection between late- and earlywood, resulting in a straight tangential crack line. Micrographic images showed that P. vitreus was more active in the secondary walls of latewood tracheids. In this region of the wood, the cell walls were strongly degraded after 9–12 months of incubation, resulting in a reduction in tensile strength, even though the wood did not show strong features of decay at the macroscopic level.     

Antibacterial activity of moso bamboo shoot skin (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) against <Emphasis Type="Italic">Staphylococcus aureus</Emphasis>

This study examined the antibacterial activity of moso bamboo shoot skin (Phyllostachys pubescens). Bamboo shoot skin itself and its dichloromethane extract had antibacterial activity against Staphylococcus aureus. Results suggest the possibility of effective utilization of antibacterial materials from bamboo shoot skins that are mainly discarded at present.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Effects of peeling and steam-heating treatment on mechanical properties and dimensional stability of oriented <Emphasis Type="Italic">Phyllostachys makinoi</Emphasis> and <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis> scrimber boards

Epidermal peeling treatment (EPT) and steam-heating treatment (SHT) are two popular pretreatments for bamboo processing. This study examined the effects of EPT and SHT on strength properties, profile density distribution, internal bond strength (IB), rate of springback, nail withdrawal resistance, and dimensional stability of oriented bamboo scrimber board (OBSB) made of moso bamboo (Phyllostachys pubescens Mazel) and makino bamboo (P. makinoi Hayata) strips. Results obtained using non-destructive testing (NDT) revealed that EPT for moso bamboo in the processing of OBSB caused lower ultrasonic-wave velocity (V_u) and dynamic modulus of elasticity (DMOE_u) parallel to the fiber direction, but higher V_u and DMOE_u perpendicular to the fiber direction. However, EPT slightly affected variations in modulus of elasticity (MOE) and modulus of rupture (MOR) of moso bamboo. In contrast, the effects of SHT on V_u and DMOE_u were inconsistent and insignificant among the OBSB samples. On the other hands, SHT caused increasing in MOE and MOR of OBSB, but leads to decrease in MOE and MOR of OBSB comprising bamboo strips after EPT. Both EPT and SHT contributed to more uniform profile densities in OBSB and had a positive impact on nail withdrawal resistance. EPT increased IB of moso bamboo and SHT enhanced IB of makino bamboo with epidermis only. Bamboo strips after SHT resulted in significant decrease in water absorption of all OBSB specimens. Reduction in swelling as a result of SHT not only improved the dimensional stability of OBSB but also enhanced strength.     

<Emphasis Type="Italic">Bursaphelenchus mucronatus</Emphasis> (Nematoda: Aphelenchoididae) vectored by <Emphasis Type="Italic">Monochamus </Emphasis><Emphasis Type="Italic">urussovi</Emphasis> (Coleoptera: Cerambycidae) in Hokkaido,Japan

Bursaphelenchus mucronatus Mamiya et Enda has been recovered for the first time from adults of the cerambycid beetle, Monochamus urussovi (Fischer), in Hokkaido, Japan. The nematode was also recovered from the inner bark of Picea jezoensis (Siebold et Zuccarini) Carrière and Abies sachalinensis (Fr Schmidt) Masters infested with M. urussovi larvae. PCR–RFLP analysis indicated that B. mucronatus in Hokkaido is the European type.     

Effects of <Emphasis Type="Italic">Ips typographus</Emphasis> (L.) damage on litter quality and decomposition rates of Oriental Spruce [<Emphasis Type="Italic">Picea Orientalis</Emphasis> (L.) Link.] in Hatila Valley National Park,Turkey

This study investigated the effects of Ips typographus (L.) damage on initial litter quality parameters and subsequent decomposition rates of oriental spruce tree species [Picea orientalis (L.) Link]. The needle litter was collected from highly damaged, moderately damaged and control stands on two aspects (north and south) and two slope position (top and bottom) on each aspect. The litter was analyzed for initial total carbon, lignin and nutrient (nitrogen, phosphorus, potassium, calcium, magnesium and manganese) concentrations. The variability in nitrogen and calcium concentrations and ratios of C:N, lignin:N and lignin:Ca was significantly affected by the insect damaged levels. While nitrogen concentrations in needle litter increased with increasing insect damage (and consequently the ratios of C:N and lignin:N decreased), calcium concentrations decreased (and consequently the ratio of lignin:Ca increased). Aspect and slope positions explained most of the variability in carbon, lignin, phosphorus, potassium, magnesium and manganese concentrations and lignin:P ratio between all studied stands. Litter decomposition was studied in the field using the litterbag technique. The litter from highly damaged stands showed highest decomposition rates followed by moderately damaged and control stands. The mass loss rates were significantly positively correlated with initial nitrogen concentration and negatively with C:N and lignin:N ratios. The effects of microclimate resulting from canopy damage on litter decomposition was also examined at the same time using standard litter with the same litter quality parameters, but they showed no significant differences among the insect damage levels indicating that alteration of the litter quality parameters produced by I. typographus damage played a more important role than altered microclimate in controlling needle litter decomposition rates. However, changes in microclimate factors due to topography influenced decomposition rates.     

Flexural creep behavior of bamboo culm (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) in its radial direction

As a construction material, the phenomenon of creep is critical to bamboo structural design. The present work investigates variation of flexural creep behavior of bamboo (Phyllostachys pubescens) in its radial direction. Bamboo specimens were divided into two groups, half of the specimens were loaded by the green side, which fiber-rich outer culm wall was in compression (A); the other half were loaded by the yellow side, which fiber-rich outer culm wall was in tension (B). The specimen in both groups were cut into three sections along radial direction, the outer part (A1, B1), the middle part (A2, B2), and the inner part (A3, B3). All specimens were conducted to a 24 h-creep tests. The results show that: The creep resistance of outer part of bamboo is favorable, no matter which kind of loading way. Compared to type A loading with fiber-rich part, specimens of type B loading with fiber-less part showed a higher creep residual strength. The fiber volume fraction was linearly associated with the initial creep of type A and the final creep of type B. It mainly related to the feature and distribution of fiber and parenchyma.     

<Emphasis Type="Italic">In vitro</Emphasis> morphogenic response of leaf sheath of <Emphasis Type="Italic">Phyllostachys bambusoides</Emphasis>

Nodal segments from secondary branches of saplings of Phyllostachys bambusoides were inoculated in MS medium to assess the in vitro morphogenic response of leaf sheath through the induction to callogenesis by Picloram(4-amino-3,5,6-trichloropicolinic acid) at different concentrations of carbohydrate under the same conditions with presence or absence of luminosity.In our experiment,secondary explants were kept in MS medium containing 8.0 mg·L-1 of Picloram for the callus formation.Calluses were transferred in MS medium supplemented with sucrose,fructose and glucose(control,2%,4% and 6%).Results show that Picloram induced the callogenesis in leaf sheath.The secondary embryogenesis was formed in yellow-globular callus.The sucrose as carbohydrate source in the absence of light was more efficient to induce rhizogenesis.Glucose was more efficiency in the presence of light.Callogenic induction and further embryogenesis evidenced the competence and determination of leaf sheath cells.     

Production of <Emphasis Type="Italic">Pinus halepensis</Emphasis> seedlings inoculated with the edible fungus <Emphasis Type="Italic">Lactarius deliciosus</Emphasis> under nursery conditions

Inoculation with edible fungi bestows an added value on mycorrhized plants since production of mushrooms as a secondary crop can be an economically-valuable resource in forestry management. In order to establish a protocol for controlled mycorrhization of Pinus halepensis with the edible fungus Lactarius deliciosus, several factors such as fertilisation (35, 60 or 120 mg total N and 13.5, 27 or 54 mg total P), potting substrate (sphagnum peat or sphagnum peat/vermiculite) and fungal inoculum (mycelial slurry produced in a bioreactor, alginate beads or peat/vermiculite) were assessed. The most effective inoculum was mycelial slurry at a dose of 10 ml/plant. The two potting substrates assessed were compatible with mycorrhiza formation. The greatest number of mycorrhized seedlings was obtained with a moderate level of N (35 mg/plant) or P fertilisation (27 mg/plant). Inoculation did not produce a consistent growth effect on P. halepensis, but seedlings met the quality requirements, making them suitable for planting out.