Physical and oxidative stability of fish oil-in-water emulsions stabilized with beta-lactoglobulin and pectin

The oxidation of fatty acids can be inhibited by engineering the surface of oil-in-water emulsion droplets to decrease interactions between aqueous phase prooxidants and lipids. The objective of this research was to evaluate whether emulsions stabilized by a multilayer emulsifier systems consisting of beta-lactoglobulin and citrus or sugar beet pectin could produce fish oil-in-water emulsions that had good physical and oxidative stability. Sugar beet pectin was compared to citrus pectin because the sugar beet pectin contains the known antioxidant, ferulic acid. A primary Menhaden oil-in-water emulsion was prepared with beta-lactoglobulin upon which the pectins were electrostatically deposited at pH 3.5. Emulsions prepared with 1% oil, 0.05% beta-lactoglobulin, and 0.06% pectins were physically stable for up to 16 days. As determined by monitoring lipid hydroperoxide and headspace propanal formation, emulsions prepared with the multilayer system of beta-lactoglobulin and citrus pectin were more stable than emulsions stabilized with beta-lactoglobulin alone. Emulsions prepared with the multilayer system of beta-lactoglobulin and sugar beet pectin were less stable than emulsions stabilized with beta-lactoglobulin alone despite the presence of ferulic acid in the sugar beet pectin. The lower oxidative stability of the emulsions with the sugar beet pectin could be due to its higher iron and copper concentrations which would produce oxidative stress that would overcome the antioxidant capacity of ferulic acid. These data suggest that the oxidative stability of oil-in-water emulsions containing omega-3 fatty acids could be improved by the use of multilayer emulsion systems containing pectins with low metal concentrations.     

Increasing the oxidative stability of liquid and dried tuna oil-in-water emulsions with electrostatic layer-by-layer deposition technology

Omega-3 Fatty acids have numerous health benefits, but their addition to foods is limited by oxidative rancidity. Engineering the interfacial membrane of oil-in-water emulsion droplets to produce a cationic and/or thick interface is an effective method to control lipid oxidation. Cationic and thick emulsion droplet interfacial membranes can be produced by an electrostatic layer-by-layer deposition technique resulting in droplets that are coated by multiple layers of emulsifiers. Tuna oil-in-water emulsion droplets coated by lecithin and chitosan produce cationic emulsion droplets that are more oxidatively stable than emulsions coated by lecithin alone. Ethylenediaminetetraacetic acid (EDTA) was able to increase the oxidative stability of emulsions stabilized with lecithin and chitosan more effectively than mixed tocopherols. The combination of EDTA and mixed tocopherols was not more effective than EDTA alone suggesting that control of prooxidant metals was the most important antioxidant technology. The production of emulsion droplets coated with lecithin and chitosan could be an excellent technology for stabilization of oxidatively unstable lipids for use in a variety of food products.     

Separation and characterization of a salt-dependent pectin methylesterase from Citrus sinensis var. Valencia fruit tissue

A pectin methylesterase (PME) from sweet orange fruit rag tissue, which does not destabilize citrus juice cloud, has been characterized. It is a salt-dependent PME (type II) and exhibits optimal activity between 0.1 and 0.2 M NaCl at pH 7.5. The pH optimum shifted to a more alkaline range as the salt molarity decreased (pH 8.5-9.5 at 50 mM NaCl). It has an apparent molecular mass of 32.4 kDa as determined by gel filtration chromatography, an apparent molecular mass of 33.5 kDa as determined by denaturing electrophoresis, and a pI of 10.1 and exhibits a single activity band after isoelectric focusing (IEF). It has a K(m) of 0.0487 mg/mL and a V(max) of 4.2378 nkat/mg of protein on 59% DE citrus pectin. Deblocking the N-terminus revealed a partial peptide composed of SVTPNV. De-esterification of non-calcium-sensitive pectin by 6.5% increased the calcium-sensitive pectin ratio (CSPR) from 0.045 +/- 0.011 to 0.829 +/- 0.033 but had little, if any, effect on pectin molecular weight. These properties indicate this enzyme will be useful for studying the PME mode of action as it relates to juice cloud destabilization.     

Enzymatic modification of pectin to increase its calcium sensitivity while preserving its molecular weight

A commercial high-methoxy citrus pectin was treated with a purified salt-independent pectin methylesterase (PME) isozyme isolated from Valencia orange peel to prepare a series of deesterified pectins. A series of alkali-deesterified pectins was also prepared at pH 10 under conditions permitting beta-elimination. Analysis of these pectins using high-performance size exclusion chromatography (HPSEC) with on-line multiangle laser light-scattering, differential viscometer, and refractive index (RI) detectors revealed no reduction in weight-average molecular weight (M(w); 150000) in the PME-treated pectin series, whereas a 16% reduction in intrinsic viscosity (IV) occurred below a degree of esterification (DE) of 47%. In contrast, alkali deesterification rapidly reduced both M(w) and IV to less than half of that observed for untreated pectin. PME treatment of a non-calcium-sensitive citrus pectin introduced calcium sensitivity with only a 6% reduction in the DE. Triad blocks of unesterified galacturonic acid were observed in (1)H nuclear magnetic resonance spectra of this calcium-sensitive pectin (CSP). These results demonstrate that the orange salt-independent PME isozyme utilizes a blockwise mode of action. This is the first report of the preparation of a CSP by PME treatment without significant loss of the pectin's M(w) due to depolymerization.     

Stabilizing behavior of soy soluble polysaccharide or high methoxyl pectin in soy protein isolate emulsions at low pH

The stability of emulsions prepared with soy protein isolates was investigated as a function of pH in the presence of two negatively charged polysaccharides: high methoxyl pectin (HMP) and soy soluble polysaccharide (SSPS). Both polysaccharides are composed of a backbone which contains galacturonic acid but, when added to soy protein isolate-stabilized emulsions, SSPS showed a different behavior than that of HMP. At neutral pH and above a critical concentration of stabilizer (0.05%), HMP caused flocculation of the emulsion droplets via a depletion mechanism. On the other hand, the emulsions containing a similar amount of SSPS did not show creaming or flocculation. At acidic pH (<4.0) the addition of pectin caused extensive droplet aggregation, while no aggregation was observed with the addition of SSPS. The differences in the stabilization behavior between the two polysaccharides can be attributed to their differences in charge, neutral sugars side chains, and molecular weight.     

Transacylation and de-esterification reactions of pectin as catalyzed by pectinesterases from tomato and citrus

The optimal conditions for the de-esterification reaction of tomato pectinesterase (PE) and citrus PE was 0.1-0.2 M NaCl and at pH 7.5-8.5, 65 degrees C, almost identical to those for the transacylation reaction as observed by turbidity (absorbance at 400 nm) change. Among the PEs tested, pea pod PE presented the most remarkable catalysis on the transacylation reaction, and 1.5% pectin solution was determined to be suitable for this reaction. Low methoxy pectin with a DE (degree of esterification) of 31% displayed a slow turbidity increase, revealing that the extent of DE was influential on the transacylation. Besides citrus pectin, apple pectin was also proved to progress transacylation reaction by PEs from tomato and citrus sources as apparently observed by turbidity method.     

Role of continuous phase protein on the oxidative stability of fish oil-in-water emulsions

Whey protein isolate (WPI), soy protein isolate (SPI), and sodium caseinate (CAS) can inhibit lipid oxidation when they produce a positive charge at the interface of emulsion droplets. However, when proteins are used to stabilize oil-in-water emulsions, only a fraction of them actually absorb to the emulsion droplets, with the rest remaining in the continuous phase. The impact of these continuous phase proteins on the oxidative stability of protein-stabilized emulsions is not well understood. WPI-stabilized menhaden oil-in-water emulsions were prepared by high-pressure homogenization. In some experiments WPI was removed from the continuous phase of the emulsions through repeated centrifugation and resuspension of the emulsion droplets (washed emulsion). Unwashed emulsions were more oxidatively stable than washed emulsions at pH 7.0, suggesting that continuous phase proteins were antioxidative. The oxidative stability of emulsions containing different kinds of protein in the continuous phase decreased in the order SPI > CAS > WPI, as determined by both hydroperoxide and headspace propanal formation. Iron-binding studies showed that the chelating ability of the proteins decreased in the order CAS > SPI > WPI. The free sulfhydryls of both WPI and SPI were involved in their antioxidant activity. This research shows that continuous phase proteins could be an effective means of protecting omega-3 fatty acids from oxidative deterioration.     

Effects of ultrasound pretreatment on the enzymatic hydrolysis of soy protein isolates and on the emulsifying properties of hydrolysates

Soy protein isolate (SPI) was modified by ultrasound pretreatment (200 W, 400 W, 600 W) and controlled papain hydrolysis, and the emulsifying properties of SPIH (SPI hydrolysates) and USPIH (ultrasound pretreated SPIH) were investigated. Analysis of mean droplet sizes and creaming indices of emulsions formed by SPIH and USPIH showed that some USPIH had markedly improved emulsifying capability and emulsion stabilization against creaming during quiescent storage. Compared with control SPI and SPIH-0.58% degree of hydrolysis (DH), USPIH-400W-1.25% (USPIH pretreated under 400W sonication and hydrolyzed to 1.25% DH) was capable of forming a stable fine emulsion (d43=1.79 μm) at a lower concentration (3.0% w/v). A variety of physicochemical and interfacial properties of USPIH-400W products have been investigated in relation to DH and emulsifying properties. SDS-PAGE showed that ultrasound pretreatment could significantly improve the accessibility of some subunits (α-7S and A-11S) in soy proteins to papain hydrolysis, resulting in changes in DH, protein solubility (PS), surface hydrophobicity (H0), and secondary structure for USPIH-400W. Compared with control SPI and SPIH-0.58%, USPIH-400W-1.25% had a higher protein adsorption fraction (Fads) and a lower saturation surface load (Γsat), which is mainly due to its higher PS and random coil content, and may explain its markedly improved emulsifying capability. This study demonstrated that combined ultrasound pretreatment and controlled enzymatic hydrolysis could be an effective method for the functionality modification of globular proteins.     

Antiallergic Effect of Picholine Olive Oil-in-Water Emulsions through β-Hexosaminidase Release Inhibition and Characterization of Their Physicochemical Properties

The inhibitory effect of Picholine olive oil from Montpellier in Southern France on the chemical mediator release in type I allergy, using rat basophilic leukemia (RBL-2H3) cells, was investigated. Oil-in-water (O/W) emulsions prepared using Picholine olive oil showed an inhibitory effect on the chemical mediator release and decreased expressions of genes related to type I allergy in RBL-2H3 cells. We then measured the phenolic compounds present in Picholine olive oil using high-performance liquid chromatography and investigated some physical properties, such as droplet size, size distribution, viscosity, and surface tension of the resulting olive O/W emulsions. Our findings indicate that Picholine olive oil has high flavonoids content, especially apigenin, and the prepared emulsion of Picholine olive oil resulted in a considerable small size distribution, with an average droplet size of 170 nm.     

Influence of environmental stresses on stability of O/W emulsions containing cationic droplets stabilized by SDS-fish gelatin membranes

Oil-in-water (O/W) emulsions containing small oil droplets (d32 approximately 0.22 microm) stabilized by sodium dodecyl sulfate (SDS)-fish gelatin (FG) membranes were produced by an electrostatic deposition technique. A primary emulsion containing anionic SDS-coated droplets (zeta approximately -40 mV) was prepared by homogenizing oil and emulsifier solution using a high-pressure valve homogenizer (20 wt % corn oil, 0.46 wt % SDS, 100 mM acetic acid, pH 3.0). A secondary emulsion containing cationic SDS-FG-coated droplets (zeta approximately +30 mV) was formed by diluting the primary emulsion with an aqueous fish gelatin solution (10 wt % corn oil, 0.23 wt % SDS, 100 mM acetic acid, 2.00 wt % fish gelatin, pH 3.0). The stabilities of primary and secondary emulsions with the same oil concentration to thermal processing, ionic strength, and pH were assessed by measuring particle size distribution, zeta potential, microstructure, destabilized oil, and creaming stability. The droplets in secondary emulsions had good stability to droplet aggregation at holding temperatures from 30 to 90 degrees C for 30 min, [NaCl] < or = 100 mM, and pH values from 3 to 8. This study shows that the ability to generate emulsions containing droplets stabilized by multilayer interfacial membranes comprised of two or more types of emulsifiers, rather than a single interfacial layer comprised of one type of emulsifier, may lead to the development of food products with improved stability to environmental stresses.     

Production and characterization of oil-in-water emulsions containing droplets stabilized by beta-lactoglobulin-pectin membranes

Oil-in-water emulsions containing droplets stabilized by beta-lactoglobulin (beta-Lg)-pectin membranes were produced using a two-stage process. A primary emulsion containing small droplets (d(32) approximately 0.3 microm) was prepared by homogenizing 10 wt % corn oil with 90 wt % aqueous solution (1 wt % beta-Lg, 5 mM imidazole/acetate buffer, pH 3.0) using a high-pressure valve homogenizer. The primary emulsion was then diluted with pectin solutions to produce secondary emulsions with a range of pectin concentrations (5 wt % corn oil, 0.45 wt % beta-Lg, 5 mM imidazole/acetate buffer, 0-0.22 wt % pectin, pH 3.0). The electrical charge on the droplets in the secondary emulsions decreased from +33 +/- 3 to -19 +/- 1 mV as the pectin concentration was increased from 0 to 0.22 wt %, which indicated that pectin adsorbed to the droplet surfaces. The mean particle diameter of the secondary emulsions was small (d(32) < 1 microm) at relatively low pectin concentrations (<0.04 wt %), but increased dramatically at higher pectin concentrations (e.g., d(32) approximately 13 microm at 0.1 wt % pectin), which was attributed to charge neutralization and bridging flocculation effects. Emulsions with relatively small mean particle diameters (d(32) approximately 1.2 microm at 0.1 wt % pectin) could be produced by disrupting flocs formed in secondary emulsions containing highly negatively charged droplets, for example, by sonication, blending, or homogenization. The particles in these emulsions probably consisted of small flocs containing a number of protein-coated droplets bound together by pectin molecules. These emulsions had good stability to further particle aggregation up to relatively high ionic strengths (< or =500 mM NaCl) and low pH (pH 3). The interfacial engineering technology used in this study could lead to the creation of food emulsions with improved physicochemical properties or stability.     

Physicochemical and functional properties of buckwheat protein product

This study was conducted to compare the physicochemical and functional properties of buckwheat protein product (BWP), soy protein isolate (SPI), and casein. BWP was prepared from buckwheat flour by the method including alkaline extraction and isoelectric precipitation. The amino acid composition of BWP was very similar to that of buckwheat flour. The protein solubility (PS) of BWP was much greater than that of SPI at all pH levels (pH 2-10) but lower than that of casein at pH 7-10. The isoelectric point of BWP was around pH 4. The higher aromatic hydrophobicities (ARH) of BWP, SPI, and casein were obtained at lower pH levels (pH 2-3). The emulsifying stability (ES) of BWP was lower than those of SPI and casein at high pH levels (pH 7-10). At all pH levels, BWP formed a thin emulsion. Regression analysis showed that the ARH of BWP was significantly associated with the ES. Although the water holding capacity of BWP was quite lower than that of SPI, its fat absorption capacity was slightly higher than those of SPI and casein. These results indicated that the physicochemical properties of BWP were different from those of SPI or casein. Thus, BWP is a potential source of functional protein for possible food application.     

Effect of processing on the antioxidant vitamins and antioxidant capacity of Vigna sinensis Var. Carilla

Cowpea (Vigna sinensis L. var. Carilla) flours obtained by fermentation with inoculum Lactobacillus plantarum (PF) or with the natural microorganisms present in the flour (NF) and subsequent heat treatment in an autoclave were prepared to study the effect of fermentation on the antioxidant vitamin content and on the antioxidant capacity. Bacterial counts and pH values, vitamins C and E, carotenoids, glutathione (GSH), superoxide dismutase-like activity (SOD-like activity), peroxyl radical-trapping capacity (PRTC), lipid peroxidation in unilamillar liposomes, and Trolox equivalent antioxidant capacity (TEAC) were evaluated in raw and processed cowpea flours. gamma-Tocopherol and delta-tocopherol were found in raw cowpea, whereas vitamin C and carotenoids were not detected. An increase in the vitamin E activity was observed in PF, whereas vitamin C and carotenoids were not detected in fermented cowpea flours. Fermentation or heat treatment in an autoclave after fermentation produced processed cowpea flours with lower PRTC, glutathione content, and SOD-like activity than those of the raw seeds. However, those processes increased the capacity to inhibit the lipid peroxidation in unilamellar lipoposomes and TEAC. According to the results obtained in this study, the fermentation of cowpeas (naturally or with L. plantarum) and fermentation and subsequent heat treatment in an autoclave are good processes to obtain functional cowpea flours having higher antioxidant capacity than the raw legume.     

Preparation and characterization of water/oil and water/oil/water emulsions containing biopolymer-gelled water droplets

The purpose of this study was to create water-in-oil (W/O) and water-in-oil-in-water (W/O/W) emulsions containing gelled internal water droplets. Twenty weight percent W/O emulsions stabilized by a nonionic surfactant (6.4 wt % polyglycerol polyricinoleate, PGPR) were prepared that contained either 0 or 15 wt % whey protein isolate (WPI) in the aqueous phase, with the WPI-containing emulsions being either unheated or heated (80 degrees C for 20 min) to gel the protein. Optical microscopy and sedimentation tests did not indicate any significant changes in droplet characteristics of the W/O emulsions depending on WPI content (0 or 15%), shearing (0-7 min at constant shear), thermal processing (30-90 degrees C for 30 min), or storage at room temperature (up to 3 weeks). W/O/W emulsions were produced by homogenizing the W/O emulsions with an aqueous Tween 20 solution using either a membrane homogenizer (MH) or a high-pressure valve homogenizer (HPVH). For the MH the mean oil droplet size decreased with increasing number of passes, whereas for the HPVH it decreased with increasing number of passes and increasing homogenization pressure. The HPVH produced smaller droplets than the MH, but the MH produced a narrower particle size distribution. All W/O/W emulsions had a high retention of water droplets (>95%) within the larger oil droplets after homogenization. This study shows that W/O/W emulsions containing oil droplets with gelled water droplets inside can be produced by using MH or HPVH.     

Lipid oxidation in corn oil-in-water emulsions stabilized by casein,whey protein isolate,and soy protein isolate

Proteins can be used to produce cationic oil-in-water emulsion droplets at pH 3.0 that have high oxidative stability. This research investigated differences in the physical properties and oxidative stability of corn oil-in-water emulsions stabilized by casein, whey protein isolate (WPI), or soy protein isolate (SPI) at pH 3.0. Emulsions were prepared with 5% corn oil and 0.2-1.5% protein. Physically stable, monomodal emulsions were prepared with 1.5% casein, 1.0 or 1.5% SPI, and > or =0.5% WPI. The oxidative stability of the different protein-stabilized emulsions was in the order of casein > WPI > SPI as determined by monitoring both lipid hydroperoxide and headspace hexanal formation. The degree of positive charge on the protein-stabilized emulsion droplets was not the only factor involved in the inhibition of lipid oxidation because the charge of the emulsion droplets (WPI > casein > or = SPI) did not parallel oxidative stability. Other potential reasons for differences in oxidative stability of the protein-stabilized emulsions include differences in interfacial film thickness, protein chelating properties, and differences in free radical scavenging amino acids. This research shows that differences can be seen in the oxidative stability of protein-stabilized emulsions; however, further research is needed to determine the mechanisms for these differences.     

Antioxidant properties of casein calcium peptides and their effects on lipid oxidation in beef homogenates

The antioxidant activity of casein calcium peptides in several in vitro assay systems was investigated. Casein calcium peptides were prepared by the microbial enzymic hydrolysis of casein calcium. The main peak of the molecular mass distribution of the peptides was about 3 kDa. Casein calcium peptides showed strong antioxidant activity with the beta-carotene bleaching method, and they also showed scavenging activity against radicals such as superoxide radicals, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, and hydroxyl radicals. Antioxidant activity was increased with an increasing peptide concentration. Casein calcium peptides also showed strong antioxidant activity against lipid oxidation in ground beef homogenates. These results suggest that casein calcium peptides are a suitable natural antioxidant that prevents the lipid oxidation of meat and related food ingredients.     

Effects of lecithin and pectin on riboflavin-photosensitized oxidation of orange oil in a multilayered oil-in-water emulsion

The effects of lecithin and pectin on riboflavin-photosensitized oxidation of orange oil in a multilayered oil-in-water emulsion are studied by response surface methodology. Lecithin and pectin contents are two variables studied. Mean oil droplet size, viscosity, and ζ-potential are investigated for evaluation of emulsion stability. Headspace oxygen depletion, increase of conjugated diene value, and released amounts of limonene and carvone are used as responses to evaluate the oxidative stability of orange oil in this emulsion. The results show that both lecithin and pectin contents have significant effects (p < 0.05) on the oxidative stability of orange oil in the multilayered emulsion during photosensitized oxidation. No interactive effect (p < 0.05) is found between the lecithin and pectin contents. To achieve optimal oxidative stability, the suggested values in ratio for lecithin and pectin contents are 14.1 ± 0.5 and 19 ± 0.7, respectively.     

Role of proteins in oil-in-water emulsions on the stability of lipid hydroperoxides

The purpose of this research was to better understand the mechanisms by which proteins affect the rates of lipid oxidation in order to develop protein-stabilized emulsion delivery systems with maximal oxidative stability. This study evaluated the affect of pH and emulsifier concentration on the stability of cumene hydroperoxide in hexadecane-in-water emulsions stabilized by beta-lactoglobulin (beta-Lg). Emulsions prepared with 0.2 wt % beta-Lg (at pH 7.0) showed a 26.9% decrease in hydroperoxide concentrations 5 min after 0.25 mM ferrous ion was added to the emulsion. EDTA, but not continuous phase beta-Lg, could inhibit iron-promoted lipid hydroperoxide decomposition. Lipid hydroperoxides were more stable to iron-promoted degradation at pH values below the pI of beta-Lg, where the emulsion droplet would be cationic and thus able to repel iron away from the lipid hydroperoxides. Heating the beta-Lg-stabilized emulsions to produce a cohesive protein layer on the emulsion droplet surface did not alter the ability of iron to decompose lipid hydroperoxides. These results suggest that proteins at the interface of emulsion droplets primarily stabilize lipid hydroperoxides by electrostatically inhibiting iron-hydroperoxide interactions.     

Mechanical and water-holding properties and microstructures of soy protein isolate emulsion gels induced by CaCl2, glucono-δ-lactone (GDL), and transglutaminase: influence of thermal treatments before and/or after emulsification

The mechanical properties, water-holding capacities (WHC), and microstructures of emulsion gels, induced by glucono-δ-lactone (GDL), CaCl(2), and microbial transglutaminase (MTGase) from unheated and heated soy protein isolate (SPI)-stabilized emulsions (at protein concentration 5%, w/v; oil volume fraction, 20%, w/v), were investigated and compared. The influence of thermal pretreatments (at 90 °C for 5 min) before and/or after emulsification was evaluated. Considerable differences in mechanical, water-holding, and microstructural properties were observed among various emulsion gels. The thermal pretreatment after emulsification increased the strength of the emulsion gels induced by GDL and CaCl(2), whereas in the case of MTGase, thermal pretreatments before and/or after emulsification on the contrary greatly inhibited gel network formation. The application of the enzyme coagulant exhibited much higher potential to form SPI-stabilized emulsion gels with higher mechanical strength than that of the other two coagulants. The WHC of the emulsion gels seemed to be not directly related to their gel network strength. Confocal laser scanning microscope analyses indicated that the network microstructure of the formed emulsion gels, mainly composed of aggregated protein-stabilized oil droplets and protein aggregate clumps, varied with the type of applied coagulants and emulsions. The differences in microstructure were basically consistent with the differences in mechanical properties of the gels. These results could provide valuable information for the formation of cold-set soy protein-stabilized emulsion gels.     

Preparation and Characterization of Starch Particles for Use in Pickering Emulsions

Particle‐stabilized emulsions, called Pickering emulsions, can be produced by using starch particles. In this work we studied how the properties of the starch particles affect the droplet size and creaming of such emulsions. In the study, various sizes of starch particles were generated by two different methods and used to stabilize Pickering emulsions. Sedimentation according to Stokes’ law was used to separate small and large starch granules. Acid hydrolysis was another method used to obtain smaller particles. All samples were modified with octenyl succinic anhydride (OSA) to increase their hydrophobicity with a level of OSA substitution between 1.8 and 3.1%. The size of starch particles was the main factor influencing emulsion droplet sizes. Furthermore, the droplet size decreased as the starch concentration increased. Using small starch particles with sizes <10 μm produced stable emulsions with smaller droplet size compared with larger sizes of starch particles, >10 μm. When subjected to acid hydrolysis, smaller starch particles were generally obtained, which could subsequently create smaller emulsion droplets. The emulsion index increased for the acid‐hydrolyzed starch owing to the size reduction of starch particles. The shape of the starch seemed to have a minor impact on the droplet size and the creaming of Pickering emulsions.