Liquid chromatographic determination of flucytosine in capsules

A liquid chromatographic method has been developed for determination of flucytosine in capsules. Flucytosine and p-aminobenzoic acid, the internal standard, are separated on a C18 reverse phase column using water-methanol-acetic acid mobile phase containing 1-octane-sulfonic acid sodium salt. Compounds are detected photometrically at 285 nm. Mean assay results for 250 and 500 mg commercial capsules were 101.5% (n = 5) of declared, respectively. Mean recovery of flucytosine added to commercial capsules was 99.3%.     

Normal phase liquid chromatographic determination of sulfamethoxazole in tablets: collaborative study

A stability-indicating liquid chromatographic method is presented for determining sulfamethoxazole in tablets. The method uses a 10 micron silica column, an isooctane-methylene chloride-2-propanol-acetonitrile-glacial acetic acid (70 + 25 + 5 + 5 + 0.5) mobile phase, and photometric detection at 254 nm. Seven laboratories collaboratively studied this method on powdered composite samples prepared from commercial 500 and 1000 mg tablets and on an authentic tablet mixture containing 83.32% added sulfamethoxazole. Mean assay results for the 500 and 1000 mg tablets were 102.2 and 97.9% of declared, respectively (n = 4). The mean recovery value for the synthetic sample was 99.4% (n = 4). The pooled reproducibility standard deviation (SD) (coefficient of variation (CV)) and pooled repeatability SD (CV) were +/- 1.01 (1.01%) and +/- 0.96 (0.96%), respectively. These results were in good agreement with those obtained by the Associate Referee for the titration method of USP XX. The proposed method can also be used for monitoring the presence of sulfanilamide in sulfamethoxazole by increasing the proportions of both acetonitrile and 2-propanol in the mobile phase. The method has been adopted official first action.     

Liquid chromatographic determination of coumarin anticoagulants in tablets: collaborative study

A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action.     

UV spectrophotometric determination of hydralazine hydrochloride in tablets: collaborative study

A UV spectrophotometric method for the determination of hydralazine hydrochloride in tablets was collaboratively studied by 5 laboratories. The method is based on conversion of hydralazine to a tetrazolo [5,1-alpha]phthalazine derivative which shows an absorption maximum at about 274 nm. Each collaborator received blind duplicate samples of 2 commercial powdered composites from 10 and 100 mg tablets, and 1 synthetic tablet formulation. Each collaborator also received a set of 10 tablets for determination of content uniformity. The pooled mean recovery of hydralazine hydrochloride from the synthetic formulation was 101.2 +/- 0.94%. The mean assay values for 10 and 100 mg tablets were 95.6 +/- 0.98 and 101.0 +/- 0.73% of the declared amounts, respectively, with corresponding CV values of 1.02 and 0.73%. The pooled mean for individual tablet assay was 99.8 +/- 3.26% of the declared value, with a CV of 3.29%. The method has been adopted official first action.     

Fluorometric and spectrophotometric determination of pirbuterol hydrochloride in authentic and dosage forms

Pirbuterol hydrochloride has been assayed in alkaline medium by using a fluorometric method to measure fluorescence intensity at 372 nm with excitation at 310 nm and by the delta A method at 242 nm. The linearity ranges are 0.5-4 micrograms/mL and 10-50 micrograms/mL, respectively. An authentic pirbuterol HCl sample was analyzed by nonaqueous potentiometric titration using 0.1N perchloric acid, and the results were compared with those for fluorometric and delta A methods. The mean percent recoveries for the authentic sample were 98.72 +/- 1.13 and 99.24 +/- 0.85, respectively. When applied to commercial capsules containing 10 mg and 15 mg each, the fluorometric method gave mean percent recoveries of 101.11 +/- 1.05 and 98.12 +/- 0.93; the delta A method gave mean percent recoveries of 100.57 +/- 0.83 and 97.80 +/- 0.75, respectively.     

Determination of fluoride in fluoride tablets and solutions by ion-selective electrode: collaborative study

A proposed method using the fluoride (F) ion-selective electrode has been developed for determining the fluoride ion concentration in tablets and solutions containing sodium fluoride. The method has been subjected to collaborative study. Eight samples consisting of 2 authentic fluoride solutions, 2 commercial fluoride solutions, and 4 commercial fluoride tablets were sent to each of 11 collaborators together with a copy of the method. Single assays on the authentic fluoride solutions known to contain 1 mg F/5 mL were performed with average recoveries of 99.5 and 99.6% and relative coefficients of variation (CV) of 2.11 and 1.91%, respectively. Single assays of 2 commercial fluoride solutions declared at 1 mg F/5 mL gave mean values of 0.994 and 0.990 mg and relative CV values of 1.88 and 2.36%, respectively. Single assays of 2 commercial fluoride tablet preparations declared at 0.5 mg F gave mean values of 0.485 and 0.478 mg and relative CV values of 3.12 and 3.71%, respectively. Single assays of 2 commercial fluoride tablet preparations declared at 1 mg F gave mean values of 0.991 and 0.981 mg and relative CV values of 2.99 and 2.85%, respectively. The method has been adopted official first action.     

Extraction methods for quantitation of gentamicin residues from tissues using fluorescence polarization immunoassay

Sodium hydroxide digestion of unhomogenized kidney and skeletal muscle for 20 min at 70 degrees C was a superior method for extracting gentamicin from tissues, compared with simple homogenization, trichloroacetic acid precipitation of homogenized tissue, and sodium hydroxide digestion of homogenized tissue. Fluorescence polarization immunoassay was used to quantitate gentamicin. Sodium hydroxide digestion of unhomogenized tissue allowed for the recovery of 90.0 +/- 5.9% (means +/- SD) from renal cortex and 79.9 +/- 3.5% from skeletal muscle. The limit of sensitivity was 17.4 ng/g kidney tissue, 15.8 ng/g digested muscle, and 39.0 ng/g digested heart. The within-assay coefficient of variation (CV) at 100 ng/g kidney was 9.2%; at 500 ng/g kidney, the CV was 2.5%; and at 2000 ng/g kidney, the CV was 1.5%. The between-assay coefficient of variation was less than 7.5% for all concentrations from kidney, and the 99% confidence interval at 100 ng/g kidney was 71.7-112.4 ng gentamicin/g kidney. The within-assay coefficient of variation (CV) at 100 ng/g muscle was 15%; at 500 ng/g muscle, the CV was 2.6%; and at 2000 ng/g muscle, the CV was 2.3%. The between-assay coefficient of variation was less than 15% for all concentrations from muscle, and the 99% confidence interval at 100 ng/g muscle was 72.5-136.8 ng gentamicin/g muscle. Gentamicin-free milk could be distinguished from milk containing gentamicin concentrations of 10 ng/mL milk with 95% confidence, and from milk containing concentrations of 30 ng gentamicin/mL milk with 99% confidence. Quantitative results at or below the tolerance level can be obtained within 90 min of sample acquisition using these extraction and assay methods.     

Proton magnetic resonance spectroscopic determination of disulfiram: collaborative study

A proton magnetic resonance spectroscopic method for determining disulfiram in the bulk drug product and in the formulated material was collaboratively studied. The method depends on the use of chloroform-d as a solvent and hexamethylcyclotrisiloxane as the internal standard. No interference from tablet excipients was observed. The method is rapid and specific. Eighteen laboratories analyzed duplicate samples of a bulk drug product, a 250 mg tablet composite, and a 500 mg tablet composite. The average per cent results and standard deviations were 99.7 +/- 1.4, 100.9 +/- 2.0, and 99.9 +/- 2.2, respectively.     

Determination of gentian violet, its demethylated metabolites, and leucogentian violet in chicken tissue by liquid chromatography with electrochemical detection

A method is presented for determination of residues of gentian violet (GV), its demethylated metabolites (pentamethyl and tetramethyl), and leucogentian violet (LGV) in chicken tissue. The analytes are extracted from tissue with acetonitrile/buffer and partitioned into methylene chloride. Polar lipids are removed on an alumina column followed by partitioning into methylene chloride from a citrate buffer. The compounds of interest are isolated on a disposable carboxylic acid cation exchange column and then eluted with 0.02% HCl in methanol. GV, its metabolites, and LGV are determined by liquid chromatography using isocratic elution with a buffered mobile phase from a cyano column and amperometric electrochemical detection at +1.000 V. Average recoveries of GV and LGV from commercially purchased chicken liver fortified with 20 ppb of each compound were 92% [standard deviation (SD) = 7, coefficient of variation (CV) = 7.6%] and 86% (SD = 7, CV = 8.1%), respectively. Average recoveries of GV, LGV, the pentamethyl metabolite, and 1 of the tetramethyl metabolites from control chicken liver (provided by the Center for Veterinary Medicine) fortified with 20 ppb of each compound were 80% (SD = 7, CV = 8.8%), 76% (SD = 3, CV = 3.9%), 83% (SD = 6, CV = 7.2%), and 76% (SD = 8, CV = 10.5%), respectively. Mean results from 10 analyses of residue-incurred chicken liver were 31 ppb GV (SD = 3, CV = 9.7%), 34 ppb pentamethyl metabolite (SD = 3, CV = 8.8%), and 40 ppb tetramethyl metabolite(s) (SD = 2, CV = 5.0%), for an average value of 105 ppb total residues (SD = 6, CV = 5.7%); no LGV was found. Data are also presented to show applicability of the method to muscle tissue.     

Proton magnetic resonance spectroscopic determination of bethanechol chloride in tablets

A simple and reliable proton magnetic resonance spectroscopic method was developed for the assay of bethanechol chloride in tablets. The proposed method entails a minimum of procedural steps and reagents. The recovery of bethanechol chloride from synthetic formulations was 99.9 +/- 0.4% (n = 15), CV = 0.4%. Mean assay values for 25 and 10 mg commercial tablets were 100.5% (n = 8) and 99.7% (n = 7) of declared, respectively. A detailed interpretation of the proton magnetic resonance spectrum is also presented.     

Gas chromatographic determination of ethylene dibromide in flour products

A method based on gas chromatography with electron capture detection was developed for the determination of ethylene dibromide (EDB) extracted from flour products. The procedure relies on the organic extraction of flour/water mixtures and uses an internal standard, 1-bromo-3-chloropropane. Recoveries of EDB at 10 and 100 ppb were 80.1 +/- 2.8% (SD) and 84.4 +/- 4.3%, respectively; recovery of the internal standard at the working concentration 500 ppb was 98.3 +/- 6.7%. Calibration curves were linear over the range 5-400 ppb, with a mean overall coefficient of variation of less than 5%. The reliability of the procedure was assessed by using gas chromatography combined with mass spectrometry. Results are shown for determination of EDB in locally milled flour products.     

Liquid chromatographic determination of acetaminophen in tablets: collaborative study

A reverse phase liquid chromatographic method previously reported for the determination of acetaminophen in tablets was collaboratively studied by 5 laboratories. Each collaborator received duplicate samples of a synthetic tablet formulation and 3 powdered commercial tablet composites. The composites represented single-component and multi-component proprietary products and a single-component generic product. The pooled repeatability (CVDo) and reproducibility (CVDx) values for the proprietary tablets were 0.89 and 1.34%, respectively. For the generic tablets, these values were 0.66 and 0.74%, respectively. The pooled recovery value for acetaminophen added to the synthetic formulation was 98.9 +/- 0.7% (n = 10) with a CV of 0.75%, CVDo of 0.37%, and CVDx of 0.78%. The overall repeatability of the method was 0.64%, and the overall reproducibility was 0.95%. The method has been adopted official first action.     

Atomic absorption spectrophotometric determination of mercury in mercury-containing drugs: collaborative study

An atomic absorption spectrophotometric (AAS) method applicable to a wide variety of mercury-containing drugs has been developed and subjected to a collaborative study. Samples were digested with a water-HCl-HNO3 (4 + 3 + 1) mixture, and the mercury was determined in solution by AAS. High levels of mercury were measured with a conventional air-acetylene flame, whereas low levels were measured by the flameless technique. Each of 7 collaborators received duplicate synthetic samples of a tincture, an ophthalmic solution, and an antiseptic solution, and duplicate commercial samples of an ointment and an injectable. The overall mean value found by collaborators for mercury in these samples was 100.13%. The corresponding overall repeatability SD (CV, %) and reproducibility SD (CV, %) values were 2.18 (2.18) and 3.38 (3.38), respectively. The proposed AAS method has been adopted official first action.     

Extraction of nonexchangeable potassium from soils with boiling one molar nitric acid: Evaluation of different modes of boiling the soil‐acid suspension

Abstract

The standardization of kind and extent of boiling during the course of extraction of potassium (K) from soil in strong acid medium is crucial for obtaining a reliable and reproducible estimate of the nonexchangeable K concentration in soil. In the present study, relationships among the amounts of K extracted by different modes of boiling soil‐acid mixture adopted, i.e., heating mantle, hot plate and burner were established. Irrespective of the dominant mineralogy of soils, boiling on hot plate gave higher estimate of K followed by heating mantle and lower values were observed in case of burner. Among the methods, boiling on heating mantle showed lower mean standard deviation (32.32 mg kg^‐1) and lower coefficient of variation (4.9%) followed by hot plate (SD=52.43 mg kg^‐1; CV=7.26%) and burner (SD=56.30 mg kg^‐1; CV=9.48%). Based on precision analysis, boiling of soil‐acid suspension on heating mantle and hot plate was found to be superior to that on gas burner in extracting nonexchangeable K from soils.     

Liquid chromatographic determination of penicillin V potassium in tablets: collaborative study

A liquid chromatographic method for the determination of penicillin V potassium in tablets was collaboratively studied by 7 laboratories. The method uses an octadecyl silane reverse-phase column, a mobile phase of acetonitrile-methanol-0.01 M potassium phosphate monobasic (21 + 4 + 75 v/v/v), photometric detection at 225 nm, and sulfadimethoxine as an internal standard. Each collaborator received 6 samples: powdered composites of 2 commercial tablet preparations and 1 synthetic tablet powder mixture, each with blind duplicates. The mean repeatability and reproducibility relative standard deviations for commercial samples were, respectively, 1.10 and 1.46% (250 mg dosage), and 0.84 and 2.82% (500 mg dosage). The average standard recovery from the synthetic formulation was 99.1%, with repeatability and reproducibility relative standard deviations of 1.30 and 3.66%, respectively. The method has been adopted official first action.     

Enzyme-linked immunosorbent assay for deoxynivalenol in corn and wheat

The availability of antibody against deoxynivalenol (DON) triacetate (Tri-Ac-DON) has enabled development of a direct enzyme-linked immunosorbent assay (ELISA) and an indirect ELISA for DON in corn and wheat. In both assays, DON is extracted from the sample with acetonitrile-water, reacted with acetic anhydride to form Tri-Ac-DON, and diluted in phosphate buffer for analysis. Direct ELISA was found to be the more sensitive procedure. Fewer interferences are evidenced, and the assay is less time consuming than is indirect ELISA. For direct ELISA, recovery of 10-1000 ppb DON added to corn and wheat was 100% (SD 15, CV 15%) and 102.1% (SD 12.2, CV 11.9%), respectively. For indirect ELISA, overall recovery of 10-1000 ppb DON added to wheat was 121.5% (SD 39.5, CV 32.5%); in the higher concentration range (500-1000 ppb), recovery was 105% (SD 18, CV 17%). The minimal detection level for DON was around 10 ppb. Analysis of 7 naturally contaminated samples for DON showed that the ELISA results agreed well with those obtained by radioimmunoassay and thin-layer chromatography.     

Atomic absorption spectrophotometric determination of chromium in foods

A method is reported for determination of chromium in foodstuffs. Organic matter is digested with nitric acid, followed by oxidation to Cr(VI) and extraction with methyl isobutyl ketone (MIBK) after HCl addition. Chromium determinations are performed by flame absorption spectroscopy. Absence of interferences is verified and recovery tests are performed on food samples. Quantitation limit (3.8 ng/mL), accuracy (NBS Standard Reference Material 1,573 Tomato Leaves, 4,500 +/- 500 ng/g, found 3,860 +/- 409 ng/g), and precision (CV for vegetable matrix = 9.05%, CV for animal matrix = 14.95%) of the procedure are evaluated.     

Liquid chromatographic determination of coumarin anticoagulants in tablets

A simple and rapid liquid chromatographic method is described for the qualitative and quantitative determination of 5 coumarin anticoagulants in tablet composites and individual tablets. Analyses are carried out on a C18 reverse phase column using tetrahydrofuran-methanol-water-acetic acid (35 + 10 + 65 + 0.1) as mobile phase and photometric detection at 311 nm. The coefficients of variation for 10 consecutive injections of a mixed standards solution ranged from 0.28% for ethyl biscoumacetate to 0.78% for acenocoumarol. Standard recoveries were as follows: acenocoumarol, 99.3%; dicumarol, 99.6%; phenprocoumon, 101.6%; and warfarin sodium, 99.0%. The method was linear between 2 and 8 micrograms of drug injected. Assay results agreed favorably with those of the USP XX methods for dicumarol, phenprocoumon, and warfarin, and the NF XIV method for acenocoumarol. In addition, close correspondence was found with the results previously reported for the same drugs by a semiautomated spectrophotometric method. The content uniformity testing of individual 50 mg dicumarol tablets and 5 mg warfarin sodium tablets by the proposed method gave average (SD) values of 100.32% (0.64) and 101.00% (0.14), respectively, whereas these values were 101.60% (1.81) and 101.80% (0.18), respectively, by the method of USP XX.     

Capillary column gas chromatographic determination of ethyl carbamate in alcoholic beverages with confirmation by gas chromatography/mass spectrometry

A method is described for determining ethyl carbamate at low microgram/kg levels in several types of alcoholic beverages by capillary column gas chromatography with Hall electrolytic conductivity detection and confirmation by mass spectrometry. Samples are diluted to obtain a uniform concentration of ethanol (ca 10%) then saturated with NaCl and extracted with methylene chloride. Extracts are evaporated to a small volume and injected in ethyl acetate solution for chromatographic analysis. The method was evaluated by 5 laboratories, 4 employing the Hall detector and one using mass spectrometric detection. Overall between-laboratory mean percent recoveries were: wine, 85.3 +/- 21.0% coefficient of variation (CV) (spiking level 20-45 micrograms/kg); sherry, 83.8 +/- 16.1% CV (spiking level, 81-142 micrograms/kg); whiskey, 79.5 +/- 13.9% CV (spiking level 127-190 micrograms/kg); and brandy, 85.0 +/- 12.5% CV (spiking level 297-446 micrograms/kg). Mass spectrometric results agreed well with the Hall results for all commodities. Detection limits were about 5 micrograms/kg for the Hall detector and about 0.5 microgram/kg for mass spectrometric detection.     

Sodium borohydride/chloranil-based assay for quantifying total flavonoids

A novel sodium borohydride/chloranil-based (SBC) assay for quantifying total flavonoids, including flavones, flavonols, flavonones, flavononols, isoflavonoids, flavanols, and anthocyanins, has been developed. Flavonoids with a 4-carbonyl group were reduced to flavanols using sodium borohydride catalyzed with aluminum chloride. Then the flavan-4-ols were oxidized to anthocyanins by chloranil in an acetic acid solution. The anthocyanins were reacted with vanillin in concentrated hydrochloric acid and then quantified spectrophotometrically at 490 nm. A representative of each common flavonoid class including flavones (baicalein), flavonols (quercetin), flavonones (hesperetin), flavononols (silibinin), isoflavonoids (biochanin A), and flavanols (catechin) showed excellent linear dose-responses in the general range of 0.1-10.0 mM. For most flavonoids, the detection limit was about 0.1 mM in this assay. The recoveries of quercetin from spiked samples of apples and red peppers were 96.5 +/- 1.4% (CV = 1.4%, n = 4) and 99.0 +/- 4.2% (CV = 4.2%, n = 4), respectively. The recovery of catechin from spiked samples of cranberry extracts was 97.9 +/- 2.0% (CV = 2.0%, n = 4). The total flavonoids of selected common fruits and vegetables were measured using this assay. Among the samples tested, blueberry had the highest total flavonoid content (689.5 +/- 10.7 mg of catechin equiv per 100 g of sample), followed by cranberry, apple, broccoli, and red pepper. This novel SBC total flavonoid assay can be widely used to measure the total flavonoid content of fruits, vegetables, whole grains, herbal products, dietary supplements, and nutraceutical products.