Heat stress effects around flowering on kernel set of temperate and tropical maize hybrids

Final kernel number in the uppermost ear of temperate maize (Zea mays L.) hybrids is smaller than the potential represented by the number of florets differentiated in this ear, and than the number of silks exposed from it (i.e., kernel set <1). This trend increases when stressful conditions affect plant growth immediately before (GS₁) or during (GS₂) silking, but the magnitude of change has not been documented for heat stress effects and hybrids of tropical background. In this work we evaluated mentioned traits in field experiments (Exp₁ and Exp₂), including (i) two temperature regimes, control and heated during daytime hours (ca. 33-40 °C at ear level), (ii) two 15-d periods during GS₁ and GS₂, and (iii) three hybrids (Te: temperate; Tr: tropical; TeTr: Te × Tr). We also measured crop anthesis and silking dynamics, silk exposure of individual plants, and the anthesis-silking interval (ASI). Three sources of kernel loss were identified: decreased floret differentiation, pollination failure, and kernel abortion. Heating affected all surveyed traits, but negative effects on flowering dynamics were larger (i) for anthesis than for silking with the concomitant decrease in ASI, and (ii) for GS₁ than for GS₂. Heat also caused a decrease in the number of (i) florets only when performed during GS₁ (−15.5% in Exp₁ and −9.1% in Exp₂), and only among Te and TeTr hybrids, (ii) exposed silks of all GS × Hybrid combinations, and (iii) harvestable kernels (mean of −51.8% in GS₁ and −74.5% in GS₂). Kernel abortion explained 95% of the variation in final kernel numbers (P < 0.001), and negative heat effects were larger on this loss (38.6%) than on other losses (≤11.3%). The tropical genetic background conferred an enhanced capacity for enduring most negative effects of heating.     

Characterizing leaf gas exchange responses of cotton to full and limited irrigation conditions

Plant responses to water deficit need to be monitored for producing a profitable crop as water deficit is a major constraint on crop yield. The objective of this study was to evaluate physiological responses of cotton (Gossypium hirsutum) to various environmental conditions under limited water availability using commercially available varieties grown in South Texas. Soil moisture and variables of leaf gas exchange were measured to monitor water deficit for various varieties under different irrigation treatments. Lint yield and growth variables were also measured and correlations among growth parameters of interest were investigated. Significant differences were found in soil moisture, leaf net assimilation (A_n), stomatal conductance (g), transpiration rate (T_r), and instantaneous water use efficiency (WUE_i) among irrigation treatments in 2006 while no significant differences were found in these parameters in 2007. Some leaf gas exchange parameters, e.g., T_r, and leaf temperature (T_L) have strong correlations with A_n and g. A_n and WUE were increased by 30–35% and 30–40%, respectively, at 600 μmol (CO₂) m⁻² s⁻¹ in comparison with 400 μmol (CO₂) m⁻² s⁻¹. Lint yield was strongly correlated with g, T_r, WUE, and soil moisture at 60 cm depth. Relative A_n, T_r, and T_L started to decrease from FTSW 0.3 at 60 cm and FTSW 0.2 at 40 cm. The results demonstrate that plant water status under limited irrigation management can be qualitatively monitored using the measures of soil moisture as well as leaf gas exchange, which in turn can be useful for describing yield reduction due to water deficit. We found that using normalized A_n, T_r, and T_L is feasible to quantify plant water deficit.     

Field-based evaluation of vernalization requirement,photoperiod response and earliness per se in bread wheat (Triticum aestivum L.)

Vernalization requirement, photoperiod response and earliness per se (EPS) of bread wheat cultivars are often determined using controlled environments. However, use of non-field conditions may reduce the applicability of results for predicting field performance as well as increase the cost of evaluations. This research was undertaken, therefore, to determine whether field experiments could replace controlled environment studies and provide accurate characterization of these three traits among winter wheat cultivars. Twenty-six cultivars were evaluated under field conditions using two natural photoperiod regimes (from different transplanting dates) and vernalization pre-treatments. Relative responses to vernalization (RRV_GDD) and photoperiod (RRP_GDD) were quantified using the reciprocal of thermal time to end of ear emergence, whereas earliness per se was estimated by calculating thermal time from seedling emergence until end of ear emergence for fully vernalized and lately planted material. An additional index based on final leaf numbers was also calculated to characterize response to vernalization (RRV_FLN). To test whether the obtained indices have predictive power, results were compared with cultivar parameters estimated for the CSM-Cropsim-CERES-Wheat model Version 4.0.2.0. For vernalization requirement, RRV_GDD was compared with the vernalization parameter P1V, for photoperiod (RRP_GDD), with P1D, and for earliness per se, EPS was compared with the sum of the component phase durations. Allowing for variation in EPS in the calibration improved the relation between observed versus simulated data substantially: correlations of RRP_GDD with P1D increased from r² = .34 (p < .01), to .82 (p < .001), and of RRV_GDD with P1V, from r² = .88 (p < .001), to .94 (p < .001). In comparisons of observed versus simulated anthesis dates for independent field experiments, the estimated model coefficients resulted in an r² of .98 (p < .001) and root mean square error of 1d. Overall, the results indicated that combining planting dates with vernalization pre-treatments can permit reliable, quantitative characterization of vernalization requirement, photoperiod response and EPS of wheat cultivars. Furthermore, emphasize the need for further study to clarify aspects that determine EPS, including whether measured EPS varies with temperature or other factors.     

Old and modern durum wheat varieties from Italy and Spain differ in main spike components

Four field experiments comparing 24 durum wheat varieties grown at different periods during the 20th century in Italy and Spain were carried out to assess the changes caused by breeding activities on the number of grains per main spike and its determinants: number of spikelets per spike, number of grains per spikelet, fertile flowering and grain setting. Increases of 0.14 grains spike⁻¹ year⁻¹ (0.43% year⁻¹ in relative terms) and 0.08 grains spike⁻¹ year⁻¹ (0.22% year⁻¹) were observed in Italian and Spanish varieties, respectively. The overall change in the number of grains per spike in Italian germplasm (29.5%) was due to increases in both, the number of spikelets per spike (7.5%) and the number of grains per spikelet (20.3%), while in Spanish varieties the increase in the number of grains per spike (19.5%) was only attributed to the improvement of the number of grains per spikelet. The increase in the number of fertile florets per spike (about 12%) was similar in both countries, but while it explained more than 70% of the changes in the number of grains per spike in Spanish varieties, grain setting was responsible for most of the improvement in the number of grains per spike in the Italian germplasm. The percentage of florets setting grains was 68 and 64% in modern Italian and Spanish varieties, respectively. Most of the changes in the number of grains per spikelet were found in the upper part of the spike on Italian varieties, whilst they were more evenly distributed in the Spanish ones. The main achievement derived from the introduction of the Rht-B1 dwarfing gene was an increase in the number of grains per spikelet, but it did not have any effect on the number of spikelets on the main spike. The lack of genetic associations between grain setting and both the number of spikelets per spike and the number of fertile florets per spike suggests that future yield gains may be obtained through increases in the three components independently.     

Kernel number determination differs among maize hybrids in response to nitrogen

In maize, the effects of nitrogen (N) deficiencies on the determination of kernel number per plant (KNP) have been described only by changes in plant growth rate during the critical period for kernel set (PGRcp). We hypothesize that N availability affects KNP also through variations in biomass allocation to the ear, which determines a stable N concentration in this organ. Six maize hybrids of different breeding origin were evaluated in field experiments at two N levels (0 and 400 kg N ha⁻¹ applied). Traits included were KNP and per apical ear (KN_E1), and the allometric estimation of PGRcp, ear growth rate during the critical period (EGRcp), and N content and N concentration in different plant organs. We demonstrated that (i) N availability promoted differences among genotypes (G) in the response of EGRcp and KNP to PGRcp, (ii) variations in KN_E1 were explained by EGRcp (r² = 0.64) and by ear N content at silking + 12 d (r² = 0.64), and (iii) ear N concentration was a highly conservative trait (range between 10.47 and 15.98 mg N g biomass⁻¹) as compared to N concentration in vegetative tissues (range between 4.94 and 18.04 mg N g biomass⁻¹). Three response patterns were detected among hybrids, one for which the relationship between EGRcp and PGRcp did not vary between N levels and experiments, a second one for which N availability affected this relationship, and a third one for which the response was affected by the year (Y) effect. These results, together with the high correlation between EGRcp and ear N content (r² = 0.88), evidenced the importance of both photo-assimilate and N availability on EGRcp and KNP determination. Values of 1.5–2.3 g ear⁻¹ d⁻¹ during the critical period and 0.49–0.70 g of N ear⁻¹ at silking + 12 d were determined as thresholds for maximizing KN_E1, and both could be easily estimated by means of allometric models.     

Environmental effects on seed yield determination of irrigated peanut crops: Links with radiation use efficiency and crop growth rate

In Argentina, delayed sowing causes a decrease in seed yield and in radiation use efficiency (RUE) of peanut crops (Arachis hypogaea L.), but it is not known if RUE reduction is mainly due to reduced temperature during late reproductive stages or to a sink limitation promoted by decreased seed number in these conditions. We analyzed seed yield determination and RUE dynamics of two cultivars (Florman and ASEM) in four irrigated field experiments (Exp_n) grown at three sites and five contrasting sowing dates (between 17 October and 21 December) in three growing seasons. An additional field experiment was performed with widely spaced plants (i.e. with no interference among them) to evaluate the effect of peg removal on RUE and leaf carbon exchange rate (CER). Seasonal dynamics of mean air temperature and irradiance, biomass production (total and pods), and intercepted photosynthetically active radiation (IPAR) were followed. Seed yield and seed yield components (pod number, seeds per pod, seed number and seed weight) were determined at final harvest. Crop growth rate (CGR) and pod growth rate (PGR) were computed for growth phases of interest. RUE values for crops sown until 14 November were 1.89–1.98 g MJ⁻¹ IPAR, within the usual range. RUE decreased significantly for cv. Florman in the late sowing of Exp₁ (29 November) and for both cultivars in Exp₃ (21 December sowing). Across experiments, seed yield (4.5-fold variation relative to minimum) was strongly associated (r² = 0.87, P < 0.0001) with variations in seed number (3.5-fold variation relative to minimum), and to a lesser extent (r² ≤ 0.54, P ≤ 0.001) to variations in seed weight (1.9-fold variation relative to minimum). Seed number was positively related (P < 0.01) to CGR (r² = 0.66) and to PGR (r² = 0.72) during the R₃–R_6.5 phase (seed number determination window), while crop growth during the grain-filling phase (i.e. between R_6.5 and final harvest) was positively associated with grain number (r² = 0.80, P < 0.001). No association was found between RUE and mean air temperature, neither for the whole cycle nor for the phase between R_6.5 and final harvest, which showed the largest temperature variation (16.4–22.4 °C) across experiments. Use of mean minimum temperature records (range between 13.8 and 18.5 °C) did no improve the relationship. However, grain-filling phase RUE showed a positive (r² = 0.69, P = 0.003) linear response to seed number across experiments. This apparent sink limitation of source activity was consistent with the reduced RUE (from 2.73 to 1.42 g MJ⁻¹ IPAR) and reduced leaf CER at high irradiance (from ca. 30 to 15 μmol m⁻² s⁻¹) for plants subjected to 75% peg removal.     

Effects of temperature and photoperiod on flowering time of forage legumes in a Mediterranean environment

Flowering time plasticity is a commonly occurring adaptive characteristic of fodder crops, including legumes, in arid and semiarid environments of the Mediterranean regions. Time of flowering is mainly influenced by genotype, temperature and photoperiod. Field experiments were carried out at Foggia (southern Italy) during successive growing seasons (from 8 to 16 growing cycles according to species) to study the relation among air temperature, photoperiod and duration of the morphological development of flowering in eight forage legume species: sulla (Hedysarum coronarium L.), sainfoin (Onobrychis viciifolia Scop.), pea (Pisum sativun L.), berseem clover (Trifolium alexandrinum L.), Persian clover (Trifolium resupinatum L.), faba bean (Vicia faba L.), common vetch (Vicia sativa L.) and hairy vetch (Vicia villosa Roth). Time to reach 10% flowering (EF) and 100% flowering (FF) were recorded. Rate of progress to flowering, defined as the inverse of time from sowing to EF and FF, was related to mean daily temperature, or to both mean daily temperature and mean photoperiod. Using the linear equations, the thermal time requirements (T_t) and the base temperature (T_b) expressed as heat units were determined by the x-intercept method for both EF and FF stages. Evaluation of flowering time was also based on days after planting (DAP), day of year (DOY) and on a photothermal index (PTI). For all species, a significant negative correlation (P ≥ 0.01) was found between planting date (PD) and DAP whereas PTI showed a significant negative relationship (P ≥ 0.05) only for faba bean, pea, berseem clover and common vetch. In sainfoin, sulla and berseem clover, the rate of progress to flowering was affected significantly (P ≥ 0.05) by both mean temperature and photoperiod. The T_t requirements to reach the EF and the FF stage ranged from 871 to 1665 °C day and from 1043 to 1616 °C day, respectively, for the studied species. Both phenological stages considered depended upon accumulated thermal time above a species-specific base temperature. Furthermore, in all legumes the onset of flowering only occurred when dual thresholds of a minimum T_t and a minimum photoperiod were reached, which were specific to each species.     

Enhanced kernel set promoted by synchronous pollination determines a tradeoff between kernel number and kernel weight in temperate maize hybrids

Maize (Zea mays L.) grain yield is strongly related to the number of harvested kernels, where kernel number can be increased by synchronously pollinating silks rather than allowing them to be progressively pollinated as they naturally appear from the husks. However, there is scarce evidence on how this practice affects kernel weight (KW) and plant grain yield (PGY), and no report exists on its effects when combined with treatments aimed to reduce apical dominance, like male sterility and detasseling. Field experiments were conducted in two growing seasons (Exp₁ and Exp₂) using two hybrids, cropped at contrasting stand densities (3 and 9 plants per m²) and including (i) male-fertile and male-sterile versions, (ii) tasseled and detasseled plants, and (iii) natural (NP) and synchronous pollination (SP; pollen added manually to ears bagged 5 days after initial silking) systems. Tassel growth of sterile and fertile versions was also evaluated in a separate experiment (Exp₃). Detasseling increased the number of ears per plant reaching silking (P < 0.001) of NP plants, but this beneficial effect of reduced apical dominance did not improve kernel number per plant (KNP) or PGY. Similarly, the early arrest of anther growth in male-sterile plants had no clear benefit on KNP. In contrast, KNP was enhanced by synchronous pollination (range between −13% and +71%; average of +15.4% in Exp₁ and +3.9% in Exp₂). However, this pollination system promoted a decreased in KW (range between −30% and +4%; average of −11.8% in Exp₁ and −7.8 in Exp₂) such that the treatment had no effect on PGY (range between −19% and +37%; average of +1% in Exp₁ and −4% in Exp₂). Because plant growth rate around flowering was not different between pollination treatments, assimilate availability per kernel was reduced from ovary fertilization onwards in synchronously pollinated plants when compared to open pollinated plants. This explains the reduced KW when increasing KNP by synchronous pollination. In summary, none of the imposed treatments allowed grain yield to be increased at the plant level.     

Mild peroxyformic acid fractionation of Miscanthus × giganteus bark. Behaviour and structural characterization of lignin

Miscanthus × giganteus bark was subjected to mild fractionation with peroxyformic acid by a two stage process. A factorial experimental design was used to study and quantify the effect of the variables (formic acid concentration (80-90%), hydrogen peroxide concentration (0.2-0.4%), temperature of the first stage (60-80 °C), and treatment time of the second stage (60-120 min)) on the main parameters of fractionation: pulp yield, remaining lignin and total polysaccharides in pulp. The dependence of lignin precipitation rate on hydrogen peroxide concentration in liquor was also studied. Hydrogen peroxide concentrations inferior to 0.5% seems to be suitable to recover high percentages of lignin. The isolated lignin was analysed by 2D-HSQC, ¹³C- and ³¹P NMR spectroscopy, FTIR spectroscopy, size-exclusion chromatography and chemical analysis. The most important chemical modifications taken place in the lignin during the fractionation were identified: β-O-4′ cleavage and hydrolysis of LC-bond structures. The C9-formula was also determined: C₉H_6.81O_2.90(OCH₃)_0.68(COOH)_0.07(OH^Ph)_0.38(OH^Al)_0.33.     

Antifungal and antiaflatoxigenic efficacy of Caesulia axillaris Roxb. essential oil against fungi deteriorating some herbal raw materials, and its antioxidant activity

The study deals with evaluation of antifungal and antiaflatoxigenic Caesulia axillaris Roxb. essential oil (EO) against herbal raw materials deteriorating fungi and its free radical scavenging activity. During mycoflora analysis these herbal raw materials were found to be severely contaminated by different fungi and aflatoxins. A total of nine different fungal species were isolated from three herbal raw materials. Aspergillus flavus LHPtc was recorded as the highest aflatoxin B1 producing strain. EOs of some plants were tested for their fungitoxicity against the toxigenic strain A. flavus LHPtc, and C. axillaris EO was found as potent fungitoxicant. C. axillaris EO was chemically characterized through GC-MS analysis which depicted the presence of 18 compounds, dl-limonene and Euasarone being the major components. The EO exhibited broad spectrum of fungitoxicity against fungi causing postharvest deterioration of herbal raw materials. At 1.0 μl ml⁻¹ the oil showed complete inhibition of fungal growth and aflatoxin B₁ production was inhibited at 0.8 μl ml⁻¹. Free radical scavenging activity of the oil was also recorded by 2,2-diphenyl-1-picrylhydrazyl assay, and its IC₅₀ value was found 18 μl ml⁻¹. The safety limit of the EO was determined in terms of LD₅₀ on mice, which was 9166.6 μl kg⁻¹, suggesting its non mammalian toxicity. The EO of C. axillaris may be recommended as a plant based preservative in enhancement of shelf life of herbal raw materials by preventing their lipid peroxidation as well as biodeterioration due to fungal and aflatoxin contamination.     

Modeling nutrient and water productivity of sorghum in smallholder farming systems in a semi-arid region of Ghana

The CERES-sorghum module of the Decision Support System for Agro-Technological Transfer (DSSAT) model was calibrated for sorghum (Sorghum bicolor (L.) Moench) using data from sorghum grown with adequate water and nitrogen and evaluated with data from several N rates trials in Navrongo, Ghana with an overall modified internal efficiency of 0.63. The use of mineral N fertilizer was found to be profitable with economically optimal rates of 40 and 80 kg N ha⁻¹ for more intensively managed homestead fields and less intensively managed bush fields respectively. Agronomic N use efficiency varied from 21 to 37 kg grain kg⁻¹ N for the homestead fields and from 15 to 49 kg grain kg⁻¹ N in the bush fields. Simulated grain yield for homestead fields at 40 kg N ha⁻¹ application was equal to yield for bush fields at 80 kg N ha⁻¹. Water use efficiency generally increased with increased mineral N rate and was greater for the homestead fields compared with the bush fields. Grain yield per unit of cumulative evapo-transpiration (simulated) was consistently higher compared with yield per unit of cumulative precipitation for the season, probably because of runoff and deep percolation. In the simulation experiment, grain yield variability was less with mineral N application and under higher soil fertility (organic matter) condition. Application of mineral N reduced variability in yield from a CV of 37 to 11% in the bush farm and from 17 to 7% in the homestead fields. The use of mineral fertilizer and encouraging practices that retain organic matter to the soil provide a more sustainable system for ensuring crop production and hence food security.     

Evaluation of the yield potential and physicochemical properties of the biomass of Salix viminalis × Populus tremula hybrids

This study presents the characteristics of four Salix viminalis × Populus tremula hybrids, produced for the first time in the world grown in a three-year field experiment. Shoot weight per plant and major biomass yield components, including plant height, number of shoots per rootstock and shoot diameter, were determined. The infection severity caused by leaf rust (Melampsora sp.) was also evaluated. The biomass of three-year-old hybrid plants was subjected to chemical analyses and calorimetric tests to determine the energy value of biomass as solid fuel. Among the studied genotypes the highest yield was achieved by one of the studied hybrids. Its biometric parameters did not differ significantly from the standard genotype, and they were superior to the parameters of the maternal form. All Salix × Populus hybrids were more susceptible to rust infections than their maternal form and one hybrid was more resistant to infections caused by fungi of the genus Melampsora. Two hybrids have optimal biomass parameters as regards both calorific value and amount of carbon, hydrogen, sulfur and nitrogen.     

Regeneration in Jatropha curcas: Factors affecting the efficiency of in vitro regeneration

Factors influencing in vitro regeneration through direct shoot bud induction from hypocotyl explants of Jatropha curcas were studied in the present investigation. Regeneration in J. curcas was found to be genotype dependent and out of four toxic and one non-toxic genotype studied, non-toxic was least responsive. The best results irrespective of genotype were obtained on the medium containing 0.5 mg L⁻¹ TDZ (Thidiazuron) and in vitro hypocotyl explants were observed to have higher regeneration efficiency as compared to ex vitro explant in both toxic and non-toxic genotypes. Adventitious shoot buds could be induced from the distal end of explants in all the genotypes. The number of shoot buds formed and not the number of explants responding to TDZ treatment were significantly affected by the position of the explant on the seedling axis. Explants from younger seedlings (≤15 days) were still juvenile and formed callus easily, whereas the regeneration response declined with increase in age of seedlings after 30 days. Transient reduction of Ca²⁺ concentrations to 0.22 g L⁻¹ in the germination medium increased the number of responding explants.Induced shoot buds, upon transfer to MS medium containing 2 mg L⁻¹ Kn (Kinetin) and 1 mg L⁻¹ BAP (6-benzylamino purine) elongated. These elongated shoots were further proliferated on MS medium supplemented with 1.5 mg L⁻¹ IAA (indole-3-acetic acid) and 0.5 mg L⁻¹ BAP and 3.01-3.91 cm elongation was achieved after 6 weeks. No genotype specific variance in shoot elongation was observed among the toxic genotypes except the CSMCRI-JC2, which showed reduced response. And for proliferation among the toxic genotypes, CSMCRI-JC4 showed highest number of shoots formed. Among the rest, no significant differences were observed. The elongated shoot could be rooted by pulse treatment on half-strength MS medium supplemented with 2% sucrose, 3 mg L⁻¹ IBA (indole-3-butyric acid), 1 mg L⁻¹ IAA, 1 mg L⁻¹ NAA (α-naphthalene acetic acid) and subsequent transfer on 0.25 mg L⁻¹ activated charcoal medium. The rooted plants could be established in soil with more than 90% success. No significant differences were observed in rooting of shoots in the different toxic genotypes. However, rooting response was reduced in non-toxic genotype as compared to toxic genotypes.     

Efficient genetic transformation of Jatropha curcas L. by microprojectile bombardment using embryo axes

An efficient and reproducible protocol was established for genetic transformation in Jatropha curcas through microprojectile bombardment. Decotyledonated embryos from mature seeds were pre-cultured for 5 days and elongated embryonic axis was subjected to bombardment for the optimization of physical parameters. The frequency of transient gus expression and survival of putative transformants were taken into consideration for the assessment of physical parameters. Statistical analysis reveal that microcarrier size, helium pressure and target distance had significant influence on transformation efficiency. Among different variables evaluated, microcarrier size 1 μm, He pressure 1100 and 1350 psi with a target distance of 9 and 12 cm respectively were found optimum by co-relating microcarrier size, helium pressure and target distance on the frequency of gus expression and survival of putative transformants. Selection of putative transformants was done with increasing concentrations (5-7 mg L⁻¹) of hygromycin. The integration of desired gene into Jatropha genome was confirmed with PCR amplification of 0.96 and 1.28 kb bands of hptII and gus gene respectively from the T₀ transgenics and Southern blot analysis using PCR amplified DIG labeled hptII gene as a probe. A successful attempt of genetic transformation was made with optimized conditions using particle gene gun and establishing a stable transformation in J. curcas with 44.7% transformation efficiency. The procedure described will be very useful for the introgression of desired genes into J. curcas and the molecular analysis of gene function.     

Agronomic and quality characteristics of triticale (X Triticosecale Wittmack) with HMW glutenin subunits 5+10

Sets of triticale (X Triticosecale Wittmack) lines derived from the cv. Presto with HMW glutenin allele Glu-D1d (subunits 5+10) translocated from bread wheat (Triticum aestivum L.) chromosome 1D to chromosome 1R were evaluated for agronomic and grain quality characteristics in 2002–2005. Two different translocation types were used: (a) single translocation 1R.1D₅₊₁₀-2 where the long arm of 1R carries the wheat segment from 1DL with the Glu-D1d replacing a secalin locus Sec-3, (b) double translocation Valdy where the long arm of 1R has the translocation 1R.1D₅₊₁₀-2 and the short arm has a segment from 1DS carrying wheat loci Gli-D1 and Glu-D3. The presence of Glu-D1d was determined by polyacrylamide gel electrophoresis (PAGE-ISTA) and DNA markers. The tested lines of triticale were compared with the check triticale cv. Presto and with wheat cultivars of different bread making quality (E-C quality classes). Single translocation 1R.1D₅₊₁₀-2 reduced grain yield by 16% and Valdy translocation by 24% as compared with cv. Presto. The Valdy translocation had substantially shortened spike length and reduced specific weight in comparison with check cv. Presto. Wet gluten content (according to the Perten method) was 12% in both translocation types, 8% in check Presto and on average 24% in wheat. Translocations increased the Zeleny sedimentation value (Valdy — 27 ml, 1R.1D₅₊₁₀-2 – 25 ml, cv. Presto — 23 ml). Triticale had a very low Hagberg falling number (FN) of 62–70 s without significant differences, while wheat had on average 301 s. The translocations did not significantly increase loaf volume; however, they improved loaf shape (height/width ratio): Valdy — 0.61, 1R.1D₅₊₁₀-2 – 0.56, cv. Presto 0.44, wheat on average 0.70. The dough was non-sticky in Valdy, slightly sticky in 1R.1D₅₊₁₀-2 and sticky in cv. Presto. Problems with a low FN for improving bread making quality of triticale are discussed. Higher bread making quality can be influenced by appropriate combination with donors of low α-amylase activity.     

Identification of traits to improve the nitrogen-use efficiency of wheat genotypes

Nitrogen (N) fertilizer represents a significant cost for the grower and may also have environmental impacts through nitrate leaching and N₂O (a greenhouse gas) emissions associated with denitrification. The objectives of this study were to analyze the genetic variability in N-use efficiency (grain dry matter (DM) yield per unit N available from soil and fertilizer; NUE) in winter wheat and identify traits for improved NUE for application in breeding. Fourteen UK and French cultivars and two French advanced breeding lines were tested in a 2 year/four site network comprising different locations in France and in the UK. Detailed growth analysis was conducted at anthesis and harvest in experiments including DM and N partitioning. Senescence of either the flag leaf or the whole leaf canopy was assessed from a visual score every 3-4 days from anthesis to complete canopy senescence. The senescence score was fitted against thermal time using a five parameters monomolecular-logistic equation allowing the estimation of the timing of the onset and the rate of post-anthesis senescence. In each experiment, grain yield was reduced under low N (LN), with an average reduction of 2.2 t ha⁻¹ (29%). Significant N × genotype level interaction was observed for NUE. Crop N uptake at harvest on average was reduced from 227 kg N ha⁻¹ under high N (HN) to 109 kg N ha⁻¹ under LN conditions while N-utilization efficiency (grain DM yield per unit crop N uptake at harvest; NUtE) increased from 34.0 to 52.1 kg DM kg⁻¹ N. Overall genetic variability in NUE under LN related mainly to differences in NUtE rather than N-uptake efficiency (crop N uptake at harvest per unit N available from soil and fertilizer; NUpE). However, at one site there was also a positive correlation between NUpE and NUE at LN in both years. Moreover, across the 2 year/four site network, the N × genotype effect for NUpE partly explained the N × genotype effect for grain yield and NUE. Averaging across the 16 genotypes, the timing of onset of senescence explained 86% of the variation in NUtE amongst site-season-N treatment combinations. The linear regression of onset of senescence on NutE amongst genoytpes was not significant under HN, but at three of the four sites was significant under LN explaining 32-70% of the phenotypic variation amongst genotypes in NutE. Onset of senescence amongst genotypes was negatively correlated with the efficiency with which above-ground N at anthesis was remobilized to the grain under LN. It is concluded that delaying the onset of post-anthesis senescence may be an important trait for increasing grain yield of wheat grown under low N supply.     

Evaluation of CIMMYT conventional and synthetic spring wheat germplasm in rainfed sub-tropical environments. II. Grain yield components and physiological traits

CIMMYT hexaploid spring wheat (Triticum aestivum L.) germplasm has played a global role in assisting wheat improvement. This study evaluated four classes of CIMMYT germplasm (encompassing a total of 273 lines), along with 15 Australian cultivars (Oz lines) for grain yield, yield components and physiological traits in up to 27 environments in Australia's north-eastern region, where terminal drought frequently reduces grain yield and grain size.Broadly-adapted CIMMYT germplasm selected for grain yield had greater yield potential and improved performance under drought stress, being up to 5% greater yielding in High-yielding (mean yield 429 g m⁻²) and 4-10% greater yielding than adapted Oz lines in Low-yielding environments (mean yield 185 g m⁻²). Whilst maintaining statistically similar harvest index and spikes m⁻² compared to broadly-adapted Oz lines across all environments, sets of selected CIMMYT lines had greater canopy temperature depression (0.18-0.27 °C), dry weight stem⁻¹ (0.20-0.37 g), increased grains spike⁻¹ (0.8-3.4 grains), grain number m⁻² (ca. 20-800 grains), and maturity biomass (56-83 g m⁻²). Compared to selected Oz lines, broadly-adapted CIMMYT lines had a smaller reduction in Low compared to High-yielding environments for these traits, especially dry weight stem⁻¹, such that CIMMYT lines had ca. 25% and 10% greater dry weight stem⁻¹ than the Oz lines in Low- and High-yielding environment groups, respectively. Broadly-adapted CIMMYT germplasm also had slightly higher stem water soluble carbohydrate concentration at anthesis (ca. 6 mg g⁻¹), which contributed to their higher grain weight (ca. 0.5 mg grain⁻¹), and maintained an agronomically appropriate time to anthesis and plant height. Thus current CIMMYT germplasm should be useful donor sources of traits to enrich breeding programs targeting variable production environments where there is a high probability of water deficit during grain filling. However, as multiple traits were important, efficient introgression of these traits in breeding programs will be complex.     

Effects of free air carbon dioxide enrichment and nitrogen supply on growth and yield of winter barley cultivated in a crop rotation

The increase in atmospheric CO₂ concentration [CO₂] has been demonstrated to stimulate growth of C₃ crops. Although barley is one of the important cereals of the world, little information exists about the effect of elevated [CO₂] on grain yield of this crop, and realistic data from field experiments are lacking. Therefore, winter barley was grown within a crop rotation over two rotation cycles (2000 and 2003) at present and elevated [CO₂](375 ppm and 550 ppm) and at two levels of nitrogen supply (adequate (N2): 262 kg ha⁻¹ in 1st year and 179 kg ha⁻¹ in 2nd year) and 50% of adequate (N1)). The experiments were carried out in a free air CO₂ enrichment (FACE) system in Braunschweig, Germany. The reduction in nitrogen supply decreased seasonal radiation absorption of the green canopy under ambient [CO₂] by 23%, while CO₂ enrichment had a positive effect under low nitrogen (+8%). Radiation use efficiency was increased by CO₂ elevation under both N levels (+12%). The CO₂ effect on final above ground biomass was similar for both nitrogen treatments (N1: +16%; N2: +13%). CO₂ enrichment did not affect leaf biomass, but increased ear and stem biomass. In addition, final stem dry weight was higher under low (+27%) than under high nitrogen (+13%). Similar findings were obtained for the amount of stem reserves available during grain filling. Relative CO₂ response of grain yield was independent of nitrogen supply (N1: +13%; N2: +12%). The positive CO₂ effect on grain yield was primarily due to a higher grain number, while changes of individual grain weight were small. This corresponds to the findings that under low nitrogen grain growth was unaffected by CO₂ and that under adequate nitrogen the positive effect on grain filling rate was counterbalanced by shortening of grain filling duration.     

Persistence and efficacy of spinosad on wheat,maize and barley grains against four major stored product pests

The insecticidal and residual effect of spinosad on wheat, maize and barley grain was evaluated in the laboratory against adults of Sitophilus oryzae (F.) (Coleoptera: Curculionidae), Rhyzopertha dominica (F.) (Coleoptera: Bostrychidae), Tribolium confusum (DuVal) (Coleoptera: Tenebrionidae), Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae) as well as against larvae of T. confusum. Spinosad was applied as a solution to 2 kg lots of each commodity at three concentrations, 0.1, 0.5 and 1 ppm, and the treated grain quantities were kept at 25 °C and 65% RH. Samples were taken from each concentration-commodity combination at the day of storage and every 30 d for 6 consecutive months (6 bioassays). The test species were exposed for 14 d to the samples and mortality and reproduction were assessed over this exposure interval. With the exception of T. confusum, 1 ppm of spinosad was highly effective against the remainder of the tested species and provided protection for a period of storage at least 4 months. Although in general, spinosad performance was not very much affected by the grain type, efficacy on maize was less stable over the 6-month period of storage and declined sooner compared to the other commodities. Spinosad almost suppressed progeny production of R. dominica during the storage period, but did not suppress progeny of the other species, since progeny were recorded even 30 d post application especially with the lowest of the tested concentrations. The results of this study indicated that spinosad may provide suitable protection for 6 months against S. oryzae or R. dominica, but is not suitable for long-term protection against T. confusum or C. ferrugineus.     

秸秆覆盖与施磷对旱地小麦小花发育与结实特性的影响

中国西南丘陵旱地气候冬干春旱且速效磷缺乏,是冬小麦生产的主要限制因素。为明确秸秆覆盖与施磷对西南丘陵旱地小麦小花发育与结实特性的影响,以川麦104为供试材料,采用裂区设计,主区为玉米秸秆覆盖(SM)和不覆盖(NSM),裂区为0、75和120 kg P₂O₅·hm^-23个施磷水平,比较分析了不同处理下小麦小花分化及结实特性的差异。结果表明,秸秆覆盖与施磷均可提高小麦小花分化数和可孕小花数,且磷素效应大于秸秆覆盖效应。与不施磷相比,施磷75和120 kg·hm^-2条件下最大分化小花数分别增加了17.4%和78.0%,可孕小花数分别增加27.0%和94.1%,小花存活率提高了16.5个百分点。施磷后穗基部可孕小花数和结实粒数增幅较大,穗中部和顶部增幅较小。与不施磷相比,施磷75和120 kg·hm^-2条件下,穗基部可孕小花数均极显著增加,增幅分别为100.0%和127.2%;结实粒数显著增加,增幅分别为186.4%和193.2%。秸秆覆盖后产量较不覆盖提高20.5%;施磷75和120...