Growth of Phlebiopsis gigantea in wood of seven conifer species

Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered.     

Growth and Wood Properties of Sitka Spruce (Picea sitchensis (Bong.) Carr.) in Nursing Mixtures Established on Nitrogen-deficient Mineral Soils

Rate of growth and wood properties of Sitka spruce (Picea sitchensis (Bong.) Carr.) were investigated in triplet mixtures with lodgepole pine (Pinus contorta Loud.) (Alaskan provenance) and Japanese larch (Larix kaempferi (Lamb.) Carr.), established on nitrogen-deficient, iron pan soils. These ?nursing? mixtures were compared with pure stands of Sitka spruce that had been either regularly or periodically fertilized with nitrogen. Japanese larch promoted a growth rate in Sitka spruce greater than that achieved in the lodgepole pine-nursed spruce and equivalent to the two pure spruce treatments over the duration of the experiment (current age 28 yrs). Growth of regularly fertilized pure Sitka spruce was not significantly greater than that of periodically fertilized pure spruce. Alaskan lodgepole pine controlled branch size on the lower part of the spruce stems more effectively than the other treatments, although this may have been a function of tree size. Branch characteristics of Japanese larch-nursed spruce, however, were similar to those of the pure spruce treatments. Japanese larch caused an imbalance in crown development in the spruce, although it is unclear from the present study whether this will have an influence on stem and wood quality by the end of the rotation. Overall, the evidence from this study suggests that Japanese larch is an effective nurse of Sitka spruce on nitrogen-deficient iron pans, maintaining a rate of growth similar to that of pure Sitka spruce periodically fertilized with nitrogen and higher than that observed in spruce nursed by Alaskan lodgepole pine.     

Blight of conifer seedlings caused by Colletotrichum gloeosporioides

In a growth chamber experiment, 70-day-old seedlings of 10 conifer species were inoculated with Colletotrichum gloeosporioides conidia to determine the host range of the fungus. Based on the percentage of seedlings affected and the disease severity on individual seedlings, the order of most to least susceptibility was: western hemlock (WH), mountain hemlock, western larch, Sitka spruce, Engelmann spruce, Douglas-fir (coastal form, then interior form), white spruce and ponderosa pine; lodgepole pine and western red cedar remained unaffected. Inoculation of WH needles showed that within 24 h C. gloeosporioides conidia germinate and appressoria (penetration structures) form. A growth chamber study demonstrated that the pathogen can infect WH at needle wetness periods as short as 15 min; number of needles affected was higher at 0.5 h, but did not increase further even when wetness was extended up to 8 h. The results are discussed in relation to blight management of greenhouse-grown conifer seedlings.Portion of a Bachelor of Science (Honors) thesis, Department of Biology, University of Victoria, Victoria, British Columbia.     

Susceptibility of four conifer species to Gremmeniella abietina

G. abietina causes severe dieback in pole-stage stands of Scots pine in Britain. The susceptibility of ll provenances of Scots pine and of three other conifer species was tested by inoculations. Significant differences in susceptibility were found amongst Scots pine provenances, with those originating from a native Scottish pinewood at Loch Maree showing the highest levels of disease. Corsican pine was shown to be the most susceptible species tested although sporulation was greatest on Scots pine. Norway spruce was also shown to be susceptible when inoculated late in the growing season. Infection in lodgepole pine was negligible. High levels of β-phellandrene were tentatively linked with resistance among trees in a single stand of Scots pine.     

The spreading of the S type of Heterobasidion annosum from Norway spruce stumps to the subsequent tree stand

The occurrence of Heterobasidion annosum in stumps and growing trees was investigated on 15 forest sites in southern Finland where the previous tree stand had been Norway spruce (Picea abies) infected by H. annosum, and the present stand was either Scots pine (Pinus sylvestris), lodgepole pine (Pinus contorta), Siberian larch (Larix siberica), silver birch (Betula pendula) or Norway spruce 8–53 years old. Out of 712 spruce stumps investigated of the previous tree stand, 26.3% were infected by the S group and 0.3% by the P group of H. annosum. The fungus was alive and the fruit bodies were active even in stumps cut 46 years ago. In the subsequent stand, the proportion of trees with root rot increased in spruce stands and decreased in stands of other tree species. On average, one S type genet spreading from an old spruce stump had infected 3.0 trees in the following spruce stand, 0.5 trees in lodgepole pine, 0.3 trees in Siberian larch, 0.05 trees in Scots pine and 0.03 trees in silver birch stand. Although silver birch generally was highly resistant to the S type of H. annosum, infected trees were found on one site that was planted with birch of a very northern provenance.     

The Effects of Clear Polythene Cloches on Conifer Seedling Growth and Shoot Morphology

Nursery seedbeds sown with lodgepole pine, Scots pine, Douglasfir, Japanese larch and Sitka spruce were covered with clearpolythene cloches for 0, 8, 13 or 18 weeks from sowing. Sitkaspruce germinated poorly and was not studied further. In bothpine species longer durations of cloche cover increased thenumber and length of stem units resulting in taller 1 + 0 seedlings.The number of internodes held at the apex for elongation inthe second season was also increased but transplant shock preventedfull expression of this potential such that differences betweenthe treatments were reduced. Only when covered for 18 weeksdid Douglas fir and Japanese larch produce 1 + 0 seedlings whichwere taller than the uncovered treatments. Through the productionof ‘summer shoots’ in their second season Douglasfir and Japanese larch were able to compensate partially forthe reduction in ‘spring shoot’ length caused bytransplanting.     

Field performance of conifer and hardwood species 5 years after nursery inoculation in the Canadian Prairie Provinces

The field performance of conifer and hardwood species inoculated with different inoculation treatments was evaluated 5 or 3 years after outplanting in the field trials established in the Canadian Prairie Provinces. In conifer trials, the growth of white spruce, black spruce, lodgepole pine, and larch seedlings observed on different sites varied greatly to different inoculation treatments depending on plant and fungal species involved. Five years after outplanting, most of the introduced fungi were replaced by several indigenous ectomycorrhizal fungal species except for Laccaria bicolor strain. Survival rates of most of the inoculated seedlings were not significantly different from control seedlings naturally colonized by other resident fungi. In hardwood trial, the effects of nursery inoculation of different poplar clones, aspen and balsam poplar were very limited. Growth and survival data were combined into seedling volume and plot volume index (PVI) for measurement of total growth response of seedlings. Our results demonstrated that certain inoculated plant-fungus combinations have played a positive role during the initial establishment of these seedlings in the field, which was reflected on significantly greater stem volume and PVI compared to non-inoculated control seedlings. The results from this study provided useful information on field evaluation for potential benefits of mycorrhizal inoculation in nursery.     

Sapstain fungi on <Emphasis Type="Italic">Pinus radiata</Emphasis> logs – from New Zealand Forest to export in Japan

Supply of clear, unstained logs from an export country is important economically as well as in reducing the biosecurity risk to an importing country such as Japan. Although conditions found within the holds of ships containing logs are thought to be ideal for rapid colonization of sapstain fungi, no research has been conducted. Research-focussed log export trials were designed to determine the extent of sapstain colonisation at specific points in the processing of logs from harvesting to arrival at the export destination. Two trials were established, in the austral summer and winter, in which mature Pinus radiata logs were harvested in New Zealand and shipped to export ports in Japan. Data loggers placed above and below deck of the ships recorded microclimatic conditions. Nine species of sapstain fungi were isolated from logs during the summer trial; the most common species isolated were Ophiostoma floccosum, Ophiostoma querci, and Ophiostoma setosum. In contrast, ten sapstain species were detected during the winter trial, with Sphaeropsis sapinea, O. querci, O. floccosum, and O. setosum most commonly isolated. This research was the first successful attempt at measuring visual sapstain development and isolating sapstain fungi from the time of harvesting to arrival at an export destination.     

Mycorrhizal and associated fungi of Sitka spruce in Irish forest mixed stands

Identity of mycorrhizas and isolation of symbionts and associated fungi from Sitka spruce growing in pure and mixed stands with either Japanese larch or Lodgepole pine are described and compared. More mycorrhizal types and sporocarps of the Agaricales were collected from mixed stands. Mycorrhizas of Lactarius rufus, Paxillus involutus and Suillus spp. were more prevalent on roots from mixed stands. The most common unidentified mycorrhizal type (type B) had features similar to synthesized mycorrhizas of two Basidiomycete isolates. Suillus grevillei and three un-identified types were associated specifically with Japanese larch. The main associating fungi were Oidiodendron sp. and Mycelium radicis atrovirens. The association of a “nurse” tree with Sitka spruce provides a more diverse mycorrhizal flora, the majority of which are shared between the tree species.     

Some factors influencing susceptibility to discoloring fungi and water uptake of Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and Oriental spruce (Picea orientalis)

Abstract

The heartwood and sapwood from Scots pine (PS), Norway spruce (PA), and Oriental spruce (PO) were tested for susceptibility to discoloring fungi and water uptake. In addition, annual ring width and density were measured. The methods used were Mycologg for testing growth of fungi and a modified version of EN 927-5 to investigate water uptake. For pine, the heartwood showed a lower water uptake and no discoloring fungi growing in the tests. The heartwood had a significantly higher density and smaller annual ring width than the sapwood. In PA the heartwood had significantly lower discoloration than sapwood. The total water uptake in g/m² was significantly higher in sapwood, but not the calculated moisture content. As for wood properties, the density was significantly higher in sapwood compared to heartwood, although there were no differences in annual ring width. Regarding PO, differences in water uptake could be seen between sapwood and heartwood although the densities were similar. These results show that susceptibility to discoloring fungi and water uptake is hard to correlate to a single inherent property when looking at different wood species.     

CONIFEROUS LITTER AMENDMENTS AND THE GROWTH OF SITKA SPRUCE

The growth of semi-checked Sitka spruce (Picea sitcbensis Carr.)on heathland has been stimulated to different degrees by theannual application of litter of Scots pine (Pinus sylvestrisL.), Corsican pine (P. nigra var. calabrica Schneid), Lodgepolepine (P. contorta Dougl.), Japanese larch (Larix leptolepisGord.), and Sitka spruce, at rates corresponding to normal plantationconditions, following an initial heavier rate. Foliar analysissuggests that the response is at least partially attributableto the influence of the litters on the nitrogen nutrition ofthe spruce and differences between litters appear to be largelydetermined by their total nitrogen contents. In this respect,Japanese larch, with an annual needle fall generally greaterthan that of the pines and a higher nitrogen content, offersthe best promise as a nurse species for spruce.     

Growth in supplementarily planted Picea abies regenerations

Abstract

An experiment was established in 1978 in two Norway spruce [Picea abies (L.) Karst.] plantations in southern Sweden to study yield after mortality in patches with and without supplementarily planted (SP) seedlings. Gaps of different sizes were created by removing the originally planted seedlings. The gaps were either left unplanted or a supplementary planting was performed with one of four species [Norway spruce, Scots pine (Pinus sylvestris L.), lodgepole pine (Pinus contorta Dougl.) or hybrid larch (Larix deciduas Mill×L. Leptolepis Gord.)] 2 (at Knäred) or 6 years (at Ullasjö) after the original plantation. In 2002, most of the SP Scots pine, lodgepole pine and hybrid larch seedlings were dead or severely damaged by roe deer and moose. Survival was high among SP Norway spruces, but they had slower growth than the originally planted spruces. Growth was lower at Ullasjö than at Knäred. In Ullasjö, growth was lower in small gaps than in large gaps. Trees in original regeneration in areas surrounding unplanted gaps were larger than trees surrounding gaps with SP seedlings, which in turn were larger than originally planted trees in plots without gaps. In conclusion, because the original plantation surrounding unplanted gaps used a large part of the open space and growth of SP seedlings was slow, supplementary planting resulted in an insignificant growth increase. However, supplementary planting may increase the timber quality of trees surrounding the gaps, although this effect remains to be quantified.     

Survival and Early Development of Lodgepole Pine

The effect of site fertility, spacing and mode of regeneration on the survival and stand development of lodgepole pine, Scots pine and Norway spruce was studied in a series of experiments comprising 22 study areas in Finland. After 13-14 yrs, lodgepole pine had a mean survival of 68% in planted and 61% in seeded plots, while Norway spruce had the highest (92%) and Scots pine the second highest survival (82%). The survival of planted lodgepole pine was better the wider the spacing. Best survival was achieved on subdry and dry sites, both with planting and with direct seeding. Dominant height was not affected by spacing, but both basal area and volume at the age of 13-14 yrs were significantly higher the denser the spacing. The average difference in the value of the estimated site index H ⁵⁰ was slightly under 3 m for the superiority of lodgepole compared with Scots pine. Seeding resulted in site indices almost as high as those of lodgepole planting.     

Outdoor exposure of untreated Scots pine (Pinus sylvestris L.) and Norway spruce [Picea abies (L.) Karst.] wood samples

Abstract

Untreated Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) samples were exposed above ground in a durability test for 6 years. The samples consisted of three pieces of wood, 22×95×500 mm, screwed together; two pieces lengthwise with a third piece overlapping. Weight was measured, to calculate moisture content (MC), and samples checked regularly for cracks and fungal growth. Parameters investigated were heartwood/sapwood (pine), annual ring orientation (spruce), stand site, annual ring width and density. Stand site, annual ring width and density had no influence on MC or fungal growth for either pine or spruce. Spruce samples with vertical annual rings had fewer cracks than samples with horizontal annual rings. Pine sapwood samples had a high MC and a large amount of rot fungi, while heartwood had a lower MC and no rot. Most spruce samples were similar to pine heartwood, except from a few samples that had high MC and fungal growth. Those were all sawn from the outer part of the log. Therefore, it can be stated that spruce sawn from the inner part has almost the same properties as pine heartwood, while spruce from the outer part of the log has similar properties to pine sapwood.     

Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species

Abstract

Thermal modification has been developed for an industrial method to increase the biological durability and dimensional stability of wood. In this study the effects of thermal modification on resistance against soft- and brown-rot fungi of sapwood and heartwood of Scots pine and Norway spruce were investigated using laboratory test methods. Natural durability against soft-rot microfungi was determined according to CEN/TS 15083-2 (2005) by measuring the mass loss and modulus of elasticity (MOE) loss after an incubation period of 32 weeks. An agar block test was used to determine the resistance to two brown-rot fungi using two exposure periods. In particular, the effect of the temperature of the thermal modification was studied, and the results were compared with results from untreated pine and spruce samples. The decay resistance of reference untreated wood species (Siberian larch, bangkirai, merbau and western red cedar) was also studied in the soft-rot test. On average, the soft-rot and brown-rot tests gave quite similar results. In general, the untreated heartwood of pine was more resistant to decay than the sapwood of pine and the sapwood and heartwood of spruce. Thermal modification increased the biological durability of all samples. The effect of thermal modification seemed to be most effective within pine heartwood. However, very high thermal modification temperature over 230°C was needed to reach resistance against decay comparable with the durability classes of “durable” or “very durable” in the soft-rot test. The brown-rot test gave slightly better durability classes than the soft-rot test. The most durable untreated wood species was merbau, the durability of which could be evaluated as equal to the durability class “moderately durable”.     

Isolation and characterisation of water soluble polysaccharides from Norway spruce and Scots pine

Water soluble polysaccharides from Norway spruce, Scots pine, and Siberian larch were compared. For all species the total amount of polysaccharides isolated from the heartwood was higher than that from the sapwood. The heartwood polysaccharides had a high content of galactose and arabinose units, and some glucuronic acid units, suggesting the presence of acidic arabinogalactans. The total amounts of recovered water-soluble arabinogalactans were 1.9 mg/g for spruce heartwood, 5.3 mg/g for pine heartwood, and as much as 106 mg/g for larch heartwood. The other water-soluble polysaccharides were mainly glucomannans. The average ratio of Gal:Ara:GlcA in the water-soluble arabinogalactans of spruce heartwood was about 4.3:1:1, pine heartwood about 4.5:1:0.2, and larch heartwood about 6.7:1:0.1. The corresponding molar ratios then being about 3.6:1:0.8 for spruce, 3.8:1:0.2 for pine, and 5.6:1:0.08 for larch. Thus, the content of glucuronic acid units was especially high in the spruce heartwood arabinogalactans. The content of arabinose was slightly higher in spruce and pine than in larch heartwood arabinogalactans.     

Aboveground production and N and P use by Larix occidentalis and Pinus contorta in the Washington Cascades, USA

Aboveground net primary production (ANPP) and N and P use patterns were determined for western larch (Larix occidentalis Nutt.), a deciduous conifer, and lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.), an evergreen conifer, in the Cascade Mountains of Washington, USA. Western larch and lodgepole pine retranslocated 87 and 66% of foliage N and 66 and 78% of foliage P, respectively. At the stand level, N use efficiency of western larch was greater than that of lodgepole pine, whereas P use efficiency of lodgepole pine was greater than that of western larch. Western larch and lodgepole pine were comparable in ANPP and production efficiency (ANPP/foliage mass) if needle longevity is considered. The similarity in ANPP of the evergreen lodgepole pine and the deciduous western larch may be related in part to the lower initial construction cost of the foliage, and the efficient use of nitrogen by western larch.     

Seedling shoot,needle and bud development in three provenances of Pinus sylvestris and Pinus contorta cultivated in northern Sweden

The patterns of current‐year shoot, needle and terminal bud elongation in seedlings of three Scots pine (Pinus sylvestris L.) and three lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) provenances were compared during the third and fourth growing seasons after planting. Lodgepole pine produced longer shoots and buds than did Scots pine, mainly because lodgepole pine formed more stem units and elongated at a faster rate. Stem unit length and the duration of shoot and bud elongation differed relatively little between species and provenances. Lammas or polycyclic growth occurred in some lodgepole pine provenances, but not in any Scots pine provenance, and was associated with enhanced shoot elongation. Needle elongation commenced earlier, proceeded at a faster rate, and was greater in lodgepole pine than in Scots pine, but ceased about the same time in all species and provenances. The heat sum required to attain 50% of final length was lower for shoots and needles in lodgepole pine than in Scots pine, and for shoots in northern provenances than in southern ones. Mitotic activity in the apical meristem of the terminal bud, which occurred less than one week after the seedlings were free from snow, started and ceased about the same time in each species, but was higher in lodgepole pine than in Scots pine early in the shoot elongation period.     

Initial reactions in sapwood of Norway spruce and Scots pine after wounding and infection by Heterobasidion parviporum and H. annosum

The xylem surface of seedlings, stem material and roots of Norway spruce (Picea abies) and Scots pine (Pinus sylvestris) were inoculated with strains of Heterobasidion annosum s. str. and H. parviporum s. str. The depth of necrosis in wounded spruce increased at a linear rate for at least seven weeks of incubation, but the rate of necrotic spread was significantly faster in infected wounds. In wounded pine the necrosis was maintained at a more superficial level for several weeks. Both spruce and pine sapwood were initially infected by hyphae of both species. In spruce, the hyphae advanced at a constant rate behind the necrotic front. On the contrary, after 1–2 weeks living H. parviporum hyphae were rare in pine rays. Heterobasidion annosum hyphae survived in pine rays, phloem and tracheids, despite a heavy accumulation of phenolics and resins and were able to penetrate into the sapwood at a linear rate although slower than infections in spruce. Histochemistry and quantitative estimates demonstrated that peroxidase activity was initially higher in spruce sapwood than in pine. Within three days of incubation, the activity in spruce sapwood disappeared concurrently with deepening necrosis. However, in pine, in both control and infected samples, there was a significant increase in peroxidase activity in the area surrounding the superficial necrosis, up to the wound surface and in the cambium and phloem around the wound. After wounding and infection, the content of soluble protein increased significantly in wood of older trees but not in seedlings. Infection resulted in an increased formation of lipophilic extractives in both spruce and pine but to a significantly greater degree in the latter, whereas the amount of hydrophilic compounds decreased in both. High‐performance liquid chromatography (HPLC) analyses of lipophilic extracts showed that inoculation of pine with the two species of Heterobasidion increased the amounts of pinosylvin, its monomethylether and several other phenolics as also resinous compounds. The results obtained may be relevant in explaining the known higher resistance of Scots pine to H. parviporum.     

Surface mould growth on wooden claddings – effects of transient wetting,relative humidity,temperature and material properties

ABSTRACT

Effects of climatic factors and material properties on the development of surface mould growth on wooden claddings were investigated in a laboratory experiment. Specimens of aspen (Populus tremula), Siberian larch (Larix Sibirica), American white oak (Querqus alba), Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and thermally modified pine were incubated in eight climatic chambers at specified wetting periods (2 or 4?h per day), relative humidity (58–86%) and temperature conditions (10–27°C). Surface mould growth was assessed weekly for 13 weeks, and the results were evaluated statistically using Generalized Estimating Equations logistic regression models. All tested climatic factors had significant effects on the mould growth, and there were significant differences between the materials. The ranking of the materials varied with temperature and over time. Aspen, pine sapwood and oak were overall most susceptible to mould growth, and thermally modified pine least susceptible. There were significant differences between sapwood and heartwood for pine and spruce. The effect of density was tested on the spruce heartwood material, but was not found to be significant. The results can be used to further develop prediction models for mould growth on wooden claddings.