Serum hormone concentrations relative to carcass composition of a random allotment of commercial-fed beef cattle

Cattle (n = 995 steers and 757 heifers) were randomly selected from a commercial abattoir (Emporia, KS) to determine the relationships between USDA quality and yield grade characteristics and serum concentrations of leptin, IGF-I, and GH. Animals were randomly selected postexsanguination on the slaughter line on 4 occasions (March, May, August, and January). Blood was collected at exsanguination and transported to the University of Missouri for analysis. Sex and hide color were recorded. Carcass data included HCW, 12th-rib fat thickness, KPH, LM area, and marbling score, which were collected from each carcass approximately 24 h postmortem. Average serum leptin concentrations were greater (P = 0.008) for heifers (11.9 ng/mL) than steers (10.9 ng/mL). Heifers had lighter carcasses (331.9 vs. 352.2 kg, P < 0.001), greater 12th-rib fat measurements (1.3 vs. 1.1 cm, P < 0.001), greater KPH (2.5 vs. 2.4%, P < 0.001), and more marbling (Small(40) vs. Small(10), P < 0.001) than steers. Positive correlations (P < 0.01) existed between leptin concentration and marbling score (r = 0.28), 12th-rib fat depth (r = 0.37), KPH (r = 0.23), and USDA yield grade (r = 0.32). Negative correlations were found between leptin and IGF-I (r = -0.11; P < 0.001) and leptin and GH (r = -0.32; P < 0.001). Negative correlations (P < 0.01) were observed for IGF-I and KPH (r = -0.23) and marbling score (r = -0.20), whereas GH was most highly negatively correlated with KPH (r = -0.23; P < 0.001). Leptin concentration accounted for variation (P < 0.001) in a model separating least squares means across USDA quality grade, separating USDA standard (8.5 ng/mL), select (10.3 ng/mL), low choice (12.2 ng/mL), and upper 2/3 choice/prime (>12.9 ng/mL) carcasses. There was no difference (P = 0.31) observed in leptin concentrations between the upper 2/3 choice and prime carcasses (12.9 and 14.2 ng/mL, respectively). Relationships within endocrine profiles and between endocrine concentrations and carcass quality characteristics may prove to be a useful tool for the prediction of beef carcass composition.     

Genetic and phenotypic relationships of serum leptin concentration with performance, efficiency of gain, and carcass merit of feedlot cattle

Leptin is the hormone product of the obese gene that is synthesized and predominantly expressed by adipocytes. This study estimated the genetic variation in serum leptin concentration and evaluated the genetic and phenotypic relationships of serum leptin concentration with performance, efficiency of gain, and carcass merit. There were 464 steers with records for serum leptin concentration, performance, and efficiency of gain and 381 steers with records for carcass traits. The analyses included a total of 813 steers, including those without phenotypic records. Phenotypic and genetic parameter estimates were obtained using SAS and ASREML, respectively. Serum leptin concentration was moderately heritable (h2 = 0.34 +/- 0.13) and averaged 13.91 (SD = 5.74) ng/mL. Sire breed differences in serum leptin concentration correlated well with breed differences in body composition. Specifically, the serum leptin concentration was 20% greater in Angus-sired steers compared with Charolais-sired steers (P < 0.001). Consequently, ultrasound backfat (27%), carcass 12th-rib fat (31%), ultrasound marbling (14%), and carcass marbling (15%) were less in Charolais- than Angus-sired steers (P < 0.001). Conversely, carcass LM area (P = 0.05) and carcass lean meat yield (P < 0.001) were greater in Charolais- compared with Angus-sired steers. Steers with greater serum leptin concentration also had greater DMI (P < 0.001), greater residual feed intake (P = 0.04), and partial efficiency of growth (P = 0.01), but did not differ in feed conversion ratio (P > 0.10). Serum leptin concentration was correlated phenotypically with ultrasound backfat (r = 0.41; P < 0.001), carcass 12th-rib fat (r = 0.42; P < 0.001), ultrasound marbling (r = 0.25; P < 0.01), carcass marbling (r = 0.28; P < 0.01), ultrasound LM area (r = -0.19; P < 0.01), carcass LM area (r = -0.17; P < 0.05), lean meat yield (r = -0.38; P < 0.001), and yield grade (r = 0.32; P < 0.001). The corresponding genetic correlations were generally greater than the phenotypic correlations and included ultrasound backfat (r = 0.76 +/- 0.19), carcass 12th-rib fat (r = 0.54 +/- 0.23), ultrasound marbling (r = 0.27 +/- 0.22), carcass marbling (r = 0.76 +/- 0.21), ultrasound LM area (r = -0.71 +/- 0.19), carcass LM area (r = -0.75 +/- 0.20), lean meat yield (r = -0.59 +/- 0.22), and yield grade (r = 0.39 +/- 0.26). Serum leptin concentration can be a valuable tool that can be incorporated into appropriate selection programs to favorably improve the carcass merit of cattle.     

An evaluation of the USDA standards for feeder cattle frame size and muscle thickness

This study was conducted to determine the live weights at which large-, medium-, and small-framed feeder steers and heifers attain a degree of finish associated with a carcass quality grade of low Choice and to examine the relationship of feeder cattle muscle thickness to carcass yield grade traits. Feeder steers (n = 401) and heifers (n = 463) representing three age classes (calf, yearling, long yearling) were selected randomly at a commercial feedlot to exhibit wide ranges in frame size and muscularity. Individual weights were recorded and a panel of five experienced evaluators scored each animal for frame size, muscle thickness, and flesh condition. The cattle were finished on a high-concentrate finishing diet and harvested at an estimated carcass fat thickness of 10 mm. Final weights and USDA carcass grade data were collected for all cattle. Frame size scores effectively predicted finished weight at a marbling end point of Small(00) for both heifers (r2 = 0.89, SE = 16 kg) and steers (r2 = 0.94, SE = 13 kg). For heifers, the Small/Medium and Medium/ Large frame score intersects corresponded to live weights of 460 kg and 520 kg, respectively. For steers, the Small/Medium and Medium/Large frame score lines corresponded to live weights of 504 kg and 577 kg, respectively. These weights were greater than weights specified in the 1979 USDA grade standards. Evaluations of feeder cattle muscling, based on 1979 USDA Standards, were associated (P < 0.05) with differences in longissimus muscle area but were not related (P = 0.08) to differences in numerical carcass yield grades. An alternative muscle thickness classification scheme, involving the use of four thickness classes, was effective for stratifying feeder cattle according to eventual differences (P = 0.004) in carcass yield grade. Our findings suggest that USDA feeder cattle grade standards developed in 1979 are no longer adequate for describing today's population of feeder cattle.     

Characterization of topcross progenies from Hereford, Limousin, and Piedmontese sires

Breeds of larger mature size tend to grow more rapidly and be older when attaining a given level of fatness. Hereford, Limousin, and Piedmontese are of approximately equal mature size and yet may vary in body composition at a given degree of maturity. However, direct comparisons among these three breeds were not found. Therefore, the objective of this research was to compare Hereford, Limousin, and Piedmontese progenies for economically important traits. Crossbred cows were bred to Hereford (n = 23), Limousin (n = 24), or Piedmontese (n = 24) sires. Male calves were either left intact or castrated at approximately 2 mo of age. Calves remained with their dams until weaning at an average age of 179 d. Male calves were then individually fed a growing ration until they reached 386 kg and then fed a finishing ration either 90 or 132 d. They were then slaughtered at a commercial abattoir and carcass data were collected. Female calves were group-fed and used to examine nutritional effects on age at puberty. Data were analyzed using REML and linear contrasts among the breed-of-sire effects evaluated. Herefordsired calves had shorter gestation periods and weighed less at birth than either Limousin- or Piedmontese-sired calves. Calving difficulty of Hereford- and Limousin-sired calves was less than that of Piedmontese-sired calves. Limousin-sired calves tended to grow more rapidly than Hereford-sired calves. By the finishing phase, Limousin- and Hereford-sired calves had greater average daily gains than Piedmontese-sired calves. Differences in dry matter intake among breeds of sire were relatively small. Differences in carcass weight, longissimus muscle area, fat depth, and percentage kidney, pelvic, and heart fat resulted in a clear stratification of USDA yield grade between breeds of sire. Differences in percentage primal cuts were similar to those for USDA yield grade. Hereford-sired calves had more marbling than progeny of Limousin or Piedmontese sires. However, the force necessary to shear cores from steaks of Piedmontese-sired calves was less than for progeny of Limousin or Hereford sires. Hereford- and Piedmontese-sired heifers were younger at puberty than Limousin-sired heifers. Within breeds of similar mature size and growth rate, ample variation exists in age at puberty and body composition at an approximately equal degree of maturity.     

Performance, body composition and carcass characteristics of finishing steers as influenced by previous forage systems

To evaluate effects of previous forage systems on feedlot performance, yearling Hereford steers (average initial weight of 249 kg) were grazed on tall fescue (TF), smooth bromegrass-red clover (BG-RC) or orchardgrass-red clover (OG-RC) pastures before finishing. Serial slaughter was utilized during the first 2 yr of this study to determine changes in carcass characteristics throughout finishing, while steers were slaughtered at approximately 29% body fat during the third year. Steers grazing TF entered the feedlot at lighter weights and maintained lighter weights throughout finishing (P less than .05) even though dry matter intakes and feed conversions were similar (P greater than .05) among treatments. Steers that previously grazed TF had less (P less than .05) body fat, body protein, fat thickness and marbling, smaller (P less than .05) ribeye areas and lower (P less than .05) USDA yield and quality grades than than those that grazed BG-RC and OG-RC. However, linear contrasts indicated that steers grazing TF were compensating in ribeye area, marbling and quality grade as days in feedlot increased. This was confirmed in the third-year study, since carcass characteristics were similar among all steers. During the third year, linear and quadratic contrasts indicated that steers that grazed TF partially compensated in body protein. As days in feedlot increased, live and hot carcass weights, body fat, fat thickness, kidney, pelvic and heart fat, marbling, and USDA yield and quality grades increased (P less than .05), while ribeye area and body protein plateaued. Although carcass characteristics were similar among treatments, steers backgrounded on TF entered the feedlot at lighter weights, and partially compensated in weight after 134 d of finishing.     

Growth and muscle development of feedlot cattle of different genetic backgrounds

The effects of crossbreeding, cattle type and dietary energy level on semitendinosus muscle (ST) development, feedlot performance, daily carcass protein and fat gain and serum anabolic hormone concentrations were studied. Over 3 consecutive years, 176 feedlot steers representing four cattle types - unselected Hereford (UH), selected Hereford (SH), Angus x Hereford x Charolais (AHC) and Angus x Hereford x Holstein (AHH) - were fed either an all-corn silage (HS) or a high grain (HG) diet. Steers were slaughtered on day 1 and at the end of the feedlot trial, and ST muscles were removed rapidly. During years 2 and 3, single blood samples were obtained from steers on days 1, 29, 57, 113 and 169, and analyzed for insulin and growth hormone (GH). Steers fed HG had a higher (P less than .005) average daily gain (ADG) than steers fed HS, and cattle type had an effect (P less than .005) on ADG. Cattle type and HG affected (P less than .005) daily carcass protein and fat gain. Weight of ST muscle and total muscle RNA, DNA and protein content increased with frame size, and HS steers had heavier (P less than .05) ST muscles than the HG steers. Steers fed HG had higher (P less than .01) serum insulin concentrations than steers fed HS, but there were no consistent cattle type effects. Serum GH concentrations were not affected by cattle type or diet. Serum insulin concentrations, combined across diet and cattle types, were correlated (P less than .01) with ADG; however, serum GH, assessed on the same basis, was not related to ADG. Average daily protein and fat gain were positively related to serum insulin and were negatively related to serum GH.     

Growth implants reduced tenderness of steaks from steers and heifers with different genetic potentials for growth and marbling

The objective of this study was to evaluate the effect of growth implants on the carcass characteristics and tenderness of steers and heifers with different genetic potentials for growth, lean meat yield production, and marbling. Two experiments were conducted. Experiment 1 evaluated Angus steers sired by bulls with high EPD for retail product yield or marbling. Implant treatment was imposed randomly within sire groups. Loins (Institutional Meat Purchasing Specifications 180) were collected from each carcass and cut into three 2.54-cm steaks aged for 7, 14 and 21 d to evaluate tenderness. The second experiment evaluated steers and heifers of British and Continental breed descent. Steers and heifers were slaughtered after 120 d on feed. Loin sections were collected, and one 2.54-cm steak aged 7 d was used for tenderness analysis. When implants were used in Angus steers, HCW and LM area increased, whereas internal fat and marbling decreased (P < 0.01). In Angus steers, sire type did not affect shear force values of steaks; however, implant use significantly increased shear force values (P < 0.01). Carcasses from cattle of Continental breed descent were significantly heavier than carcasses of British breed descent with larger LM area, slightly less fat, and a reduced yield grade (P < 0.01). Also, steer carcasses were heavier than heifer carcasses with larger LM (P < 0.05), but no effect of sex on fat depth, internal fat, yield grade or marbling was observed. No significant interactions were seen between growth implant and breed or between growth implant and sex for shear force values. Shear force values were significantly less for steaks from steers and heifers of British decent compared with steers and heifers of Continental descent (P < 0.01). Steaks from implanted steers and heifers had significantly (P < 0.01) greater shear force values than steaks from steers and heifers not implanted. Use of growth implants in growing cattle resulted in significantly heavier carcass weights, larger LM area, and reduced internal fat. However, implant use also reduced the amount of marbling along with contributing to reduced tenderness. Complicating the tenderness issue is the increased shear force values reported for heifers as well as steers of Continental breed descent. Use of implants may contribute to tenderness variability because of different animal responses to implants.     

Effects of dried full-fat corn germ and vitamin E on growth performance and carcass characteristics of finishing cattle

Two experiments were conducted to evaluate dried full-fat corn germ (GERM) as a supplemental fat source in cattle finishing diets. In Exp. 1, 24 pens totaling 358 crossbred beef steers with an initial BW of 319 kg were allowed ad libitum access to diets containing dry-rolled corn, 35% wet corn gluten feed, and 0, 5, 10, or 15% GERM on a DM basis. Increasing GERM decreased (linear; P < 0.02) DMI and increased (quadratic; P < 0.02) ADG. Steers fed 10% GERM had the greatest ADG (quadratic; P < 0.02) and G:F (quadratic; P < 0.05). The addition of GERM increased (linear; P < 0.05) fat thickness, KPH, and the percentage of USDA Yield Grade 4 carcasses (quadratic; P < 0.03), with steers fed 15% GERM having the greatest percentage of USDA Yield Grade 4 carcasses. In Exp. 2, 48 pens totaling 888 crossbred beef heifers with an initial BW of 380 kg were allowed ad libitum access to diets containing steam-flaked corn, 35% wet corn gluten feed, and either no added fat (control), 4% tallow (TALLOW), or 10 or 15% GERM on a DM basis, with or without 224 IU of added vitamin E/kg of diet DM. No fat x vitamin E (P > or = 0.08) interactions were detected. Fat addition, regardless of source, decreased (P < 0.01) DMI, marbling score, and the number of carcasses grading USDA Choice. Among heifers fed finishing diets containing TALLOW or 10% GERM, supplemental fat source did not affect DMI (P = 0.76), ADG (P = 0.54), G:F (P = 0.62), or carcass characteristics (P > or = 0.06). Increasing GERM decreased DMI (linear; P < 0.01) and ADG (quadratic; P < 0.02), with ADG by heifers fed 10% GERM slightly greater than those fed control but least for heifers fed 15% GERM. Increasing GERM improved (quadratic; P < 0.03) G:F of heifers, with heifers fed 10% GERM having the greatest G:F. Increasing GERM decreased HCW (linear; P < 0.02), marbling score (linear; P < 0.01), and the percentage of carcasses grading USDA Choice (linear; P < 0.01). The addition of vitamin E increased (P < 0.04) the percentage of carcasses grading USDA Select and decreased (P < 0.01) the percentage of carcasses grading USDA Standard. These data suggest that GERM can serve as a supplemental fat source in cattle finishing diets, and that the effect of vitamin E did not depend on source or concentration of supplemental fat.     

Response to ractopamine-HCl in heifers is altered by implant strategy across days on feed

Two experiments were conducted to investigate the effects of ractopamine-HCl (RAC) and implant strategy or days on feed (DOF) on feedlot performance and expression of beta-adrenergic receptors (AR). In Exp. 1, 1,147 feedlot heifers weighing 282 +/- 3 kg were used with implant treatments of Revalor-200 (R200) at arrival, or Revalor-IH at arrival with reimplantation with Finaplix-H on d 58 (RF). Ractopamine (0 vs. 200 mg/d) was fed the last 28 d in both experiments. Treatments were randomly assigned to 16 pens. At slaughter, semimembranosus muscle tissue was excised for RNA isolation. Ractopamine administration increased (P < 0.05) ADG, G:F, HCW, and LM; decreased (P < 0.05) 12th rib fat depth; and improved (P < 0.05) yield grade. There was no effect (P > 0.10) on the expression of beta1-AR mRNA; however, there was a tendency (P = 0.10) for RAC feeding to increase beta2-AR mRNA levels. For beta3-AR mRNA, there was an implant by RAC interaction (P = 0.05), with RAC numerically increasing beta3-AR mRNA in heifers implanted with RF, but a decrease (P < 0.05) in expression in heifers implanted with R200. Ractopamine also decreased (P < 0.05) IGF-I mRNA in heifers implanted with RF. In Exp. 2, 2,077 heifers were used to investigate the effects of RAC and DOF. Days on feed were 129, 150, and 170, and RAC was administered the last 28 d. Ractopamine improved (P < 0.05) G:F, but had no other effects (P > 0.05) on performance. Average daily gain decreased (P < 0.05) as DOF increased. Hot carcass weight, LM area, 12th rib fat, G:F, calculated yield grade, and marbling score increased (P < 0.05) and the percentage of KPH fat decreased (P < 0.05) as DOF increased. These data aid in our understanding of the effects of steroidal implants, DOF, and RAC administration in feedlot heifers.     

Evaluation of performance characteristics in a diallel among Simmental, Limousin, Polled Hereford and Brahman beef cattle. II. Carcass traits

Evaluations of steer and heifer progeny from a diallel mating design of Simmental, Limousin, Polled Hereford and Brahman beef cattle over 5 yr are presented. Traits evaluated included final weight, hot carcass weight, ribeye area, 12th rib fat thickness, marbling score, yield grade, dressing percentage and percentage of kidney, pelvic and heart fat. Progeny of Simmental sires were heavier at slaughter than those with Brahman sires (P less than .05), but no differences were found for carcass weight. Dressing percentage was higher for Limousin crosses compared with progeny of other sire breeds (P less than .05). Similar results were found for dam breeds, except that progeny of Limousin dams had heavier carcasses with a higher dressing percentage (P less than .05) than Brahman crosses. Crosses of Limousin and Simmental had larger ribeye areas (P less than .05) compared with calves of the other breeds. Progeny of Polled Hereford dams had higher marbling scores and were fatter than progeny of dams of other breeds (P less than .05). Heterosis estimates were significant for all Brahman crosses for final weight, carcass weight and ribeye area, but these contrasts were negligible for other traits. Estimates of general combining ability were positive and significant for Simmental for final weight, carcass weight, ribeye area and marbling score and were significant and negative for Limousin for final weight, fat thickness and yield grade. Maternal values were generally small.     

Effects of ractopamine supplementation on growth performance and carcass characteristics of feedlot steers differing in biological type

Effects of ractopamine hydrochloride (RAC) supplementation on growth performance and carcass characteristics of feedlot steers differing in biological type were investigated using British, Continental crossbred, and Brahman crossbred calf-fed steers (n = 420). Steers of each type were weighed at reimplantation [British, mean BW = 375 kg (SD = 38 kg); Continental crossbred, mean BW = 379 kg (SD = 42 kg); Brahman crossbred, mean BW = 340 (SD = 32 kg)] and sorted into 7 BW blocks, each block consisting of 2 pens (10 steers per pen) per type. Pens within a block x type subclass were randomly assigned to RAC treatments (0 or 200 mg x steer(-1) x d(-1) fed during the final 28 d of the finishing period). The type x RAC interaction did not affect (P > 0.05) any of the traits evaluated in this study. Feeding RAC improved (P = 0.001) ADG (1.50 vs. 1.73 +/- 0.09 kg) and G:F (0.145 vs. 0.170 +/- 0.005), but did not affect (P = 0.48) DMI of steers. Dressing percentage, adjusted fat thickness, KPH percentage, and yield grade were not affected by RAC supplementation. Carcasses of steers fed RAC had heavier (P = 0.01) HCW (359 vs. 365 +/- 4.9 kg), larger (P = 0.046) LM areas (81.7 vs. 84.0 +/- 1.1 cm(2)), and tended (P = 0.07) to have lower mean marbling scores (487 vs. 477 +/- 5.2; Slight = 400, Small = 500) than did carcasses of control steers. Among the 3 biological types, Brahman crossbred steers had the lowest DMI and produced the lightest-weight carcasses that had the lowest mean marbling score (P < 0.05). Compared with Continental crossbred and Brahman crossbred steers, British steers produced carcasses with the greatest (P = 0.001) mean marbling scores. Continental crossbred steers had the heaviest BW and greatest dressing percentages and produced the heaviest carcasses with the largest LM areas (P < 0.05) compared with British and Brahman crossbred steers. In the present study, 28 d of supplementation with RAC at a dosage rate of 200 mg x steer(-1) x d(-1) elicited consistent responses in growth performance and carcass traits among 3 diverse biological cattle types.     

Characterization of biological types of cattle (Cycle V): carcass traits and longissimus palatability

Carcass (n = 854) and longissimus thoracis palatability (n = 802) traits from F1 steers obtained from mating Hereford, Angus, and MARC III cows to Hereford or Angus (HA), Tuli (Tu), Boran (Bo), Brahman (Br), Piedmontese (Pm), or Belgian Blue (BB) sires were compared. Data were adjusted to constant age (444 d), carcass weight (333 kg), fat thickness (1.0 cm), fat trim percentage (21%), and marbling (Small00) end points. Results presented in this abstract are for age-constant data. Carcasses from BB- and HA-sired steers were heaviest (P < 0.05) and carcasses from Bo- and Tu-sired steers were lightest (P < 0.05). Adjusted fat thickness was greatest (P < 0.05) on carcasses from HA-sired steers and least (P < 0.05) on carcasses from BB- and Pm-sired steers. Numerical USDA yield grades were lowest (P < 0.05) for carcasses from Pm- and BB-sired steers and highest (P < 0.05) for carcasses from HA- and Br-sired steers. Marbling scores were highest (P < 0.05) for carcasses from HA- and Tu-sired steers and lowest (P < 0.05) for carcasses from Br-, BB-, and Pm-sired steers. Longissimus thoracis from carcasses of HA-, Pm-, and Tu-sired steers had the lowest (P < 0.05) 14-d postmortem Warner-Bratzler shear force values. Carcasses from HA-sired steers had longissimus thoracis with the highest (P < 0.05) tenderness ratings at 7 d postmortem. Longissimus thoracis from carcasses of Br- and Bo-sired steers had the highest (P < 0.05) Warner-Bratzler shear forces and the lowest (P < 0.05) tenderness ratings at 7 d postmortem. Adjustment of traits to various slaughter end points resulted in some changes in sire breed differences for carcass traits but had little effect on palatability traits. Carcasses from BB- and Pm-sired steers provided the most desirable combination of yield grade and longissimus palatability, but carcasses from HA-cross steers provided the most desirable combination of quality grade and longissimus palatability. Tuli, a breed shown to be heat-tolerant, had longissimus tenderness similar to that of the non-heat-tolerant breeds and more tender longissimus than the heat-tolerant breeds in this study.     

Glucose-6-phosphate dehydrogenase and leptin are related to marbling differences among Limousin and Angus or Japanese Black x Angus steers

This work investigated the metabolic basis for the variability of carcass and i.m. adiposity in cattle. Our hypothesis was that the comparison of extreme breeds for adiposity might allow for the identification of some metabolic pathways determinant for carcass and i.m. adiposity. Thus, 23- to 28-mo-old steers of 3 breeds, 2 with high [Angus or Japanese Black x Angus (J. Black cross)] and 1 with low (Limousin) i.m. and carcass adiposity, were used to measure activities or mRNA levels, or both, of enzymes involved in de novo lipogenesis [acetyl-coA carboxylase, fatty acid synthase (FAS), glucose-6-phosphate dehydrogenase (G6PDH), malic enzyme], circulating triacylglycerol (TAG) uptake (lipoprotein lipase), and fatty acid esterification (glycerol-3-phosphate dehydrogenase), as well as the mRNA level of leptin, an adiposity-related factor. In a first study, enzyme activities were assayed in the s.c. adipose tissue (AT), the oxidative rectus abdominis, and the glycolytic semitendinosus muscles from steers finished for 6 mo. Compared with Angus or J. Black cross, Limousin steers had a 27% less (P = 0.003) rib fat thickness, and 23 and 29% less (P < or = 0.02) FAS and G6PDH activities in s.c. AT. In rectus abdominis and semitendinosus, the 75% less (P < 0.001) TAG content was concomitant with 50% less (P < 0.001) G6PDH activity. In a second study, enzyme activities plus mRNA levels were assayed in an oxido-glycolytic muscle, the longissimus thoracis (LT), in the i.m. AT dissected from LT, and in s.c. AT from the same Limousin steers and from Angus steers finished for 10 mo. Compared with Angus, the 50% less (P < 0.001) rib fat thickness in Limousin contrasted with the 1.1- to 5.8-fold greater (P < or = 0.02) mRNA levels or activities, or both, of acetyl-coA carboxylase, G6PDH, lipoprotein lipase, and glycerol-3-phosphate dehydrogenase in s.c. AT. Conversely, the 90% less (P < 0.001) TAG content in Limousin LT was concomitant to the 79 and 83% less (P < or = 0.002) G6PDH activity and leptin mRNA level. Such differences could arise from a greater number of adipocytes in LT from Angus steers because no difference was found between Limousin and Angus for G6PDH activity and leptin mRNA in i.m. AT. We conclude that FAS and G6PDH in s.c. AT could be involved in differences in carcass adiposity, but this relationship disappeared when the fatness increased strongly. Leptin and G6PDH are related to the expression of marbling whatever the body condition and thus could be relevant indicators of marbling in beef cattle.     

Effects of growth type on carcass traits of pasture- or feedlot-developed steers.

Carcasses of 342 steers of known genetic backgrounds from four fundamentally different growth types were developed either on pasture or feedlot regimens to study differences in carcass traits. Growth types were large framed-late maturing (LL), intermediate framed-intermediate maturing (II), intermediate framed-early maturing (IE), and small framed-early maturing (SE). Five calves from each growth type were assigned to each regimen in each year of a 9-yr study. Eighteen steers were removed from the study because of accident or illness. Data collected were preslaughter shrunk BW (SBW); hot carcass weight (HCW); chilled carcass weight (CCW); dressing percentage (DRESS); fat thickness at the 12th and 13th-rib interface (FAT); percentage kidney, pelvic, and heart fat (KPH); longissimus muscle area (LMA); marbling score (MARB); quality grade (QG); and yield grade (YG). Differences in carcass traits reflected genetic differences among growth types. The LL steers had heavier BW, HCW, and CCW and larger LMA (P < .05) than steers of other growth types, regardless of development regimen. Among pasture-developed steer carcasses, IE and SE steers had higher (P < .05) MARB and QG than either LL or II steers. Carcasses of large framed-late maturing steers had the lowest (P < .05) MARB and QG of the growth types. Carcasses of the II, IE, and SE steers had a higher (P < .05) numerical value for YG than carcasses of the LL steers. Among the carcasses of the feedlot-developed steers, IE and SE steers had the highest (P < .05) MARB and QG. Carcasses from the IE and SE steers were fatter (P < .05) than those from LL or II steers. Carcasses of the LL steers had the lowest percentage of KPH of growth types developed in the feedlot. No difference was observed in KPH for carcasses of II, IE, and SE steers. The LL steer carcasses had the lowest numerical value for YG of all growth types. These data indicate that variation existed among carcass traits for the four growth types and that carcass traits influenced by fatness were greater and more attainable in the feedlot-developed steers using current methods of evaluation.     

The influence of sex-class, USDA yield grade and USDA quality grade on seam fat trim from the primals of beef carcasses

Beef carcasses (129 steers and 80 heifers) differing in weight, muscling, fatness and marbling score were selected to represent the full spectrum of USDA yield grades; one side was fabricated into boneless primal cuts. Primals were trimmed of all external fat and intermuscular (seam) fat and all components were weighed. Regression equations were developed to predict the percentage of seam fat on an external fat-free primal basis using USDA yield grade (YG), marbling score and a squared function of YG as the independent variables. YG (.77) and marbling score (.67) were highly correlated to seam fat. Heifers tended to have a higher predicted percentage of seam fat than did steers across all YG. Primals from USDA Choice carcasses had approximately 1.0 percentage point more predicted seam fat than did USDA Select primals at the same YG and sex-class. The YG 2.5 heifers had similar proportions of predicted seam fat from primals as YG 3.5 steers, but YG 3.5 heifers tended to have more seam fat than YG 4.5 steers. The same trend was noted between YG 4.5 heifers and YG 5.5 steers, indicating a sex-related deposition of seam fat in fed cattle.     

The effects of ractopamine-hydrogen chloride (Optaflexx) on performance, carcass characteristics, and meat quality of finishing feedlot heifers

Two experiments were conducted at the Kansas State University Beef Cattle Research Center to determine the effects of ractopamine-HCl (Optaflexx) on growth performance, carcass characteristics, and meat quality of finishing feedlot heifers. In Exp. 1, heifers implanted with Revalor-H (n = 302, initial BW = 479 kg) were fed steam-flaked corn diets with 0 (control) or 200 mg of ractopamine-HCl (OPT) per heifer daily for 28 d before slaughter. Average daily gain and DMI were not different between treatments (P > 0.17); however, OPT cattle tended to have a greater G:F (P = 0.06). Treatments did not differ with respect to final BW, HCW, dressing percentage, USDA yield grade, USDA quality grade, marbling score, LM area, KPH, Warner-Bratzler shear force, weight loss during cooking, or L*, a*, or b* colorimetric values during a 7-d retail display or purge loss from loin steaks during retail display (P > 0.19). In Exp. 2, nonimplanted crossbred heifers (n = 281, BW = 451 +/- 2 kg) were fed finishing diets based on steam-flaked corn. A control diet (no ractopamine) was compared with diets providing 200 mg of OPT per heifer daily for periods of 28 or 42 d (200 x 28 and 200 x 42, respectively), 300 mg/d for 28 d (300 x 28), and a step-up regimen consisting of 14 d at 100 mg, followed by 14 d at 200 mg, and the final 14 d at 300 mg of OPT (step-up). Feeding OPT had no effect on carcass weight gain among treatments (P = 0.18). The efficiency of carcass gain was 34 and 35% greater (P = 0.06) for the 200 x 42 and step-up groups compared with control, respectively. Feeding OPT at 300 mg for 28 d reduced DMI compared with the control, 200 x 28, and 200 x 42 (P < 0.05) groups. Administration of OPT had no effect on marbling score, yield grade, LM area, KPH, or percentages of carcasses grading USDA Choice (P > 0.10). Feeding ractopamine-HCl (Optaflexx) to finishing heifers generally improved the efficiency of carcass gain with minimal effect on carcass characteristics. These effects were most pronounced in heifers fed ractopamine for 42 d.     

Effects of supplemental rumen-protected conjugated linoleic acid or linoleic acid on feedlot performance, carcass quality, and leptin concentrations in beef cattle

Thirty-six Angus x Hereford heifers (365 kg) were used to determine effects of dietary lipid supplementation from two sources during the final 32 or 60 d of feeding on serum and adipose tissue leptin concentrations, animal performance, and carcass characteristics. Following an initial feeding period of 56 d, heifers were fed one of three diets in a 3 x 2 factorial arrangement: 1) basal diet, 2) basal diet plus 4% (DM basis) corn oil, or 3) basal diet plus 2% (DM basis) rumen-protected conjugated linoleic acid (a mixture of Ca-salts of palm oil fatty acids with 31% conjugated linoleic acid). Jugular blood samples were collected at 28-d intervals (d 28 to 118) and serum subsequently harvested for leptin quantification via RIA. Real-time ultrasound measurements were collected at 28-d intervals across time on feed. At slaughter, samples were obtained from various adipose depots. Data were analyzed with dietary treatment, length of supplementation, adipose depot (when appropriate), and all two- and three-way (when appropriate) interactions in the repeated measures model. Measures of feedlot performance, including ADG, DMI, and gain:feed did not differ (P > 0.23) with dietary treatment or supplementation length. Heifers supplemented with corn oil tended (P < 0.07) to have higher marbling scores following 32 d of treatment than those supplemented with rumen-protected conjugated linoleic acid, with controls intermediate. Quality grade and hot carcass weight did not differ (P > 0.15) with treatment or length of supplementation. Leptin concentrations were higher (P < 0.05) from d 57 to 118 on feed than the initial period (d 0 to 56) of dietary adaptation when all animals received the basal diet. Circulating leptin concentrations were not affected by dietary treatment. However, leptin concentrations in adipose tissues were greater (P < 0.05) for heifers supplemented with corn oil than either control or rumen-protected conjugated linoleic acid diets, which did not differ. Compared with adipose tissues from rumen-protected conjugated linoleic acid-supplemented animals, tissues from heifers fed corn oil contained 68% greater leptin concentration. Correlations between performance, carcass traits, and serum leptin concentrations were low. Serum leptin concentrations across time on feed were not associated with carcass and performance data, including ADG, DMI, and gain:feed. Based on these data, concentrations of leptin are not related to indices of feedlot performance and carcass quality in beef cattle.     

Growth,carcass characteristics,muscle conjugated linoleic acid (CLA) content,and response to intravenous glucose challenge in high percentage Wagyu,Wagyu x Limousin,and Limousin steers fed sunflower oil-containing diet

The effect of breed and diet on insulin response to glucose challenge and its relation to intramuscular fat deposition was determined in 36 steers with 12 each of greater than 87% Wagyu (referred to as Wagyu), Wagyu x Limousin, and Limousin breeds. Weaned steers were blocked by weight into heavy, medium, and light calves and placed in six pens with two pens per weight type and with two steers of each breed per pen. Three pens with steers from each weightclass were fed backgrounding and finishing diets for 259 d, while the other three pens were fed the same diets where 6% of the barley grain was replaced with sunflower oil. Prior to initiation of the finishing phase of the study the intravenous glucose tolerance test (VGTIT) was conducted in all steers. Once steers were judged as carrying adequate 12th-rib fat, based on weight and days on feed, they were harvested and graded and samples of the longissimus muscle were procured for determination of fat content and fatty acid composition. Dietary oil improved (P = 0.011; 0.06) ADG and feed conversion efficiency of steers during the latter part of backgrounding and only ADG during early part ofthe finishing period. Generally percent kidney, pelvic, and heart fat was the only adiposity assessment increased (P = 0.003) by dietary oil. The IVGTT results indicated that insulin response to intravenous glucose was lower in Limousin steers than in Wagyu steers. Dietary oil decreased (P = 0.052) fasting plasma insulin concentration in Wagyu steers compared with Limousin steers. The correlation coefficients among the IVGTT measures and intramuscular fat content or marbling score were less than 0.4, and only a negative trend existed between fasting insulin and USDA marbling scores. However, the carcasses of the Wagyu steers graded US Choice, and 66% of the Wagyu carcasses graded US Prime, which were substantially better than the quality grades obtained for the carcasses from the other breed types. Dietary oil did not affect muscle fat content but increased (P = 0.01) conjugated linoleic acid (CLA) concentrations by 339%. Results indicated that IVGTT measures were not appropriate indices of marbling potential in cattle and that dietary oil can enhance CLA content of beef.     

Genome-wide scans for QTL affecting carcass traits in Hereford x composite double backcross populations

A genome-wide scan for chromosomal regions influencing carcass traits was conducted spanning 2.413 morgans on 29 bovine autosomes using 229 microsatellite markers. Two paternal half-sib families of backcross progenies were produced by mating Hereford x composite gene combination (CGC) bulls to both Hereford and CGC dams. Progeny of the first sire (n = 146) were born in 1996 and progeny of the second sire (n = 112) were born in 1997. Each year cattle were fed out and slaughtered serially when they were between 614 and 741 d of age. Phenotypes measured at harvest were: live weight; carcass weight; fat depth; marbling; percentage kidney, pelvic, and heart fat (KPH); and rib eye area. Dressing percentage and USDA Yield Grade were calculated from these data. The phenotypes were adjusted to age-, live weight-, and fat depth-constant endpoints using analysis of covariance. The resulting residuals were analyzed by interval mapping to detect QTL. Within family, nominal significance was established by permutation analysis. Approximate genomewide significance levels were established by applying the Bonferroni correction to the nominal probability levels. Regression and error sums of squares and degrees of freedom were pooled across families when suggestive linkage identified in one family was confirmed in the other. The results indicate promising locations for QTL affecting live weight on BTA 17 and marbling on BTA 2 that segregate in Bos taurus. Also, previously identified linkage between central markers on BTA 5 and USDA Yield Grade was confirmed in one family. Greater marker saturation in these regions coupled with refined methods for data analysis will lead to more precise determination of QTL positions.     

Early-weaning and postweaning nutritional management affect feedlot performance, carcass merit, and the relationship of 12th-rib fat, marbling score, and feed efficiency among Angus and Wagyu heifers

Twelve 3/4 Angus (Angus) and 12 Wagyu-cross (1/2 Wagyu x 1/2 Angus) (Wagyu) heifers were weaned at 180 d of age and grazed on endophyte-infected tall fescue for 16 mo before entering the feedlot as 2-yr-olds. Twelve 3/4 Angus heifer calves and 12 Wagyu-cross heifer calves from the following year's calf crop were weaned at 142 +/- 4.1 d of age, immediately adjusted to an 80% concentrate diet, and finished as calves. All heifers were fed a common finishing diet until an estimated 50% of their respective group would grade USDA low Prime or better based on ultrasound predictions. Ultrasound measurements of s.c. and i.m. fat depots were recorded at 60-d intervals throughout the finishing period. Heifers finished as calves had higher (P = 0.02) marbling scores at any given fat thickness and gained more efficiently (P < or = 0.01) at any given marbling score than heifers finished as 2-yr-olds. Gain:feed decreased quadratically (P < or = 0.05) as 12th-rib fat thickness increased for Angus and Wagyu heifers. Gain:feed decreased linearly (P < or = 0.01) for Wagyu calves and quadratically (P < or = 0.01) for Angus calves as 12th-rib fat thickness increased. However, these differences in slope were not different (P = 0.34) as a result of breed among heifers finished as calves. Marbling score increased linearly (P < or = 0.01) as 12th-rib fat thickness increased for Angus and Wagyu heifers finished as 2-yrolds or as calves. However, Wagyu heifers, regardless of age at feedlot entry, had a higher marbling score (P < or = 0.05) at any given 12th-rib fat thickness than Angus heifers. Finishing early-weaned heifers as calves as opposed to 2-yr-olds results in i.m. fat deposition during a period of more efficient growth. Additionally, including Wagyu genetics into the breeding of early-weaned heifers finished as calves or as 2-yr-olds results in higher marbling scores at any 12th-rib fat thickness.