Modeling sediment sources and yields in a Pyrenean catchment draining to a large reservoir (Ésera River,Ebro Basin)

Purpose

The study aimed to use the Soil and Water Assessment Tool (SWAT) model to simulate erosion processes in an alpine–prealpine catchment in order to provide data and information that may be relevant for managers so as to minimize reservoir siltation and water quality degradation. The main objective was to assess sediment production across the catchment and sediment supply to the main reservoir.

Materials and methods

The Barasona reservoir catchment (1,509 km²) is located in the Central Spanish Pyrenees, in the Ebro Basin. This catchment was selected for the case study given the regional significance of the Barasona reservoir and its siltation problems. The catchment has a mountain climate, with strong altitudinal and north–south gradients. The catchment is characterized by heterogeneous topography and lithology, resulting in a varied mosaic of slopes, soil types, and land covers. The Jueu karst system and two small headwater reservoirs were parameterized and calibrated in the model. The SWAT model sediment calibration for the catchment was based on a prior monthly hydrologic calibration, and the model validation was based on the sediment depositional history of the Barasona reservoir.

Results and discussion

The simulation period (2003–2006) and the validation period (1993–2002) produced average sediment yields to the reservoir of 643,000 and 575,000 t year^?1, respectively. Large variations in sediment production were found between the subcatchments in the Barasona catchment due to differences in rock outcrops, land cover, and slope gradient. Sediment loss in the Jueu karst system was 15,500 t and the two small headwater reservoirs retained 31,200 and 50,300 t. Sediment production in relation to precipitation showed high temporal variability, with specific sediment yields to the Barasona reservoir ranging from 2.74 to 8.25 t ha^?1 year^?1. Strong lithological control was observed for sediment production in the subcatchments. The main sediment sources were located in the badlands developed on marls in the middle part of the catchment (internal depressions).

Conclusions

The proposed model has proved useful for identifying areas where significant erosion processes take place in large alpine–prealpine catchments at a regional level and also for assessing discharge losses by the karst system and the sedimentary role of the small reservoirs. The information obtained through this research will be of interest in assessing the spatial distribution of sediment sources and areas of high sediment yield, which will be useful to establish criteria for remediation strategies.     

Validating the Use of 137Cs Measurements to Derive the Slope Component of the Sediment Budget of a Small Rangeland Catchment in Southern Italy

The sediment budget is a key concept and tool for characterizing the mobilization, transfer and storage of fine sediment within a catchment. Caesium‐137 measurements can provide valuable information on gross and net erosion rates associated with sheet and rill erosion that can be used to establish the slope component of a catchment sediment budget. However, there is a need to validate the use of ¹³⁷Cs measurements for this purpose, because their reliability has sometimes been questioned. The study reported focuses on a small (3·04 ha) steepland (mean slope 37%) catchment in Southern Italy. It exploits the availability of information on the medium‐term sediment output from the catchment provided by the construction of a reservoir at its outlet in 1978 and the existence of estimates of soil redistribution rates derived from ¹³⁷Cs measurements made on 68 replicate soil cores collected from the slopes of a substantial proportion of the catchment in 2001, to validate the use of ¹³⁷Cs measurements to construct the slope component of the catchment sediment budget. An additional 50 replicate soil cores were collected from the catchment slopes for ¹³⁷Cs analysis, to complement the data already available. Nine cores collected from the area occupied by the reservoir were used to estimate the mean annual sediment input to the reservoir. In the absence of evidence that the poorly developed channel system in the catchment was either a significant sediment source or sink, it was possible to directly compare the estimate of net soil loss from the catchment slopes (7·33 Mg ha⁻¹ y⁻¹) with the estimate of sediment output from the catchment provided by the reservoir deposits (7·52 Mg ha⁻¹ y⁻¹). Taking account of the uncertainties involved, the close agreement of the two values is seen as providing a convincing validation of the use of ¹³⁷Cs measurements to both estimate soil redistribution rates and as a basis for constructing the slope component of the sediment budget of a small catchment. Copyright © 2015 John Wiley & Sons, Ltd.     

Modelling the impact of climate change on sediment yield in a highly erodible Mediterranean catchment

Purpose

The assessment of climate change impacts on the sediment cycle is currently a primary concern for environmental policy analysts in Mediterranean areas. Nevertheless, quantitative assessment of climate change impacts is still a complex task. The aim of this study was to implement a sediment model by taking advantage of sediment proxy information provided by reservoir bottom deposits and to use it for climate change assessment in a Mediterranean catchment.

Materials and methods

The sediment model was utilised in a catchment that drains into a large reservoir. The depositional history of the reservoir was reconstructed and used for sediment sub-model implementation. The model results were compared with gauged suspended sediment data in order to verify model robustness. Then, the model was coupled with future precipitation and temperature scenarios obtained from climate models. Climatological model outputs for two emission scenarios (A2 and B2) were simulated and the results compared with a reference scenario.

Results and discussion

Model results showed a general decrease in soil moisture and water discharge. Large floods, which are responsible for the majority of sediment mobilisation, also showed a general decrease. Sediment yield showed a clear reduction under the A2 scenario but increased under the B2 scenario. The computed specific sediment yield for the control period was 6.33 Mg ha^?1 year^?1, while for the A2 and B2 scenarios, it was 3.62 and 7.04 Mg ha^?1 year^?1, respectively. Furthermore, sediment transport showed an increase in its time compression, i.e. a stronger dependence of total sediment yield from the largest event contributions.

Conclusions

This study shows a methodology for implementing a distributed sediment model by exploiting reservoir sedimentation volumes. This methodology can be applied to a wide range of catchments, given the high availability of reservoir sedimentation data. Moreover, this study showed how such a model can be used in the framework of a climate change study, providing a measure of the impact of climate change on soil erosion and sediment yields.     

Distribution of total mercury in coastal sediments from Jade Bay and its catchment, Lower Saxony, Germany

Purpose

Sediment cores provide a reliable record of mercury (Hg) contamination and can be used to study long-term Hg pollution and relevant environmental change. In the last hundred years, there were several events which may have contributed to the accumulation of Hg in Jade Bay and its catchment. This work was undertaken to assess the record in total Hg (THg) content in sediments of cores from Jade Bay and its catchment.

Materials and methods

A 5-m sediment core from Jade Bay, Lower Saxonian Wadden Sea, southern North Sea and a 12-m core from its catchment area (Wangerland, coastal zone of the Jade Bay) were used to study Hg contents in sediments. Total Hg, grain size distribution, aluminium (Al) and total organic carbon (TOC) were analysed on subsamples of both sediment cores. Total Hg was determined by oxygen combustion-gold amalgamation using DMA-80.

Results and discussion

As THg contents of the Jade Bay core were positively correlated to the sum of TOC and Al contents (r ²?=?0.86, p?<?0.001), the Hg data were interpreted using a regional normalisation function with the sum of Al and TOC as the normalisation parameters. Total Hg contents of the Wangerland core were correlated better to Al contents (r ²?=?0.70, p?<?0.001) than to the sum of TOC and Al contents (r ²?=?0.63, p?<?0.05). Therefore, Hg contents in sediments of the Wangerland core were normalised to Al contents. Comparison between enrichment factors and the background range of the sediment cores suggested that Jade Bay was contaminated about 50 years ago, and that Wangerland, or the catchment area of Jade Bay, was contaminated about 300 years ago, if no diagenetic remobilization occurred.

Conclusions

Total Hg contents of both cores were low and of no concern to the aquatic environment of Jade Bay. The Hg record was in good agreement with the history of industrial development in the region; thus, Hg deposition could have occurred through atmospheric input, ammunition residues of the Second World War and volcanic emanations, as well as through diagenetic remobilization.     

Recent sedimentation rates in Garaet El Ichkeul Lake, NW Tunisia, as affected by the construction of dams and a regulatory sluice

Purpose

Ichkeul National Park, NW Tunisia, is a UNESCO Biosphere Reserve. Garaet El Ichkeul Lake is known for its seasonal variability in water level and salinity. In recent decades, the waterbody has been affected by the construction of new hydraulic structures. To reduce the impacts of dams and to maintain the sustainability of the ecosystem, a sluice was built at the outlet of the lake, and it operated for the first time in 1996. This paper describes an investigation of recent sedimentation dynamics in Ichkeul Lake, determined by radiometric dating of sediment cores.

Materials and methods

A sediment core was collected with a UWITEC gravity corer at the deepest, central part of the lake in August 2009. Specific activities of unsupported lead-210 (²¹⁰Pb) and caesium-137 (¹³⁷Cs) were measured in the core, enabling calculation of recent sediment accumulation rates (SAR). Published radiometric data from nearby sediment cores, collected in 1997 and 1982, provide a comparison.

Results and discussion

The measured excess ²¹⁰Pb inventory was 5300?±?500?Bq?m^?2, leading to an estimation of constant flux of 165?±?16?Bq?m^?2?yr^?1, a value higher than the best estimate for local atmospheric fluxes (123?±?12?Bq?m^?2?yr^?1) and the flux estimated from the core collected in 1982 (48?Bq?m^?2?yr^?1). The ¹³⁷Cs inventory was 3550?±?120?Bq?m^?2, two times higher than the historical ¹³⁷Cs atmospheric deposition in the area. The ¹³⁷Cs profile displayed a distinct peak, but the ¹³⁷Cs depth-distribution did not follow the pattern expected from atmospheric deposition. Application of the constant rate of supply (CRS) model, with the reference point method, produced a chronology and SAR values comparable to those found in previous work. The whole ¹³⁷Cs profile was quantitatively reconstructed from the historical records of atmospheric deposition, using the system-time-averaged (STA) model.

Conclusions

The CRS and STA models provide consistent sediment accumulation results for the whole data set, considering the time resolution of the chronology (~6?years) and analytical uncertainties. Results from cores sampled in 1982, 1997 and 2009 reveal an increasing SAR trend, from ~0.25?g?cm^?2?yr^?1 in the early 1940s to ~0.67?g?cm^?2?yr^?1 at present. In the 13?years since installation of sluice gates at Tinja, SAR in the central Ichkeul Lake has not declined. Thus, if siltation continues at the present rate, shallowing of the lake will seriously affect the hydromorphology and ecology of this important lake.     

Impact of no-tillage agricultural systems on sediment yield in two large catchments in Southern Brazil

Purpose

The impact of agriculture on water resources has long been a problem associated with the formation of runoff, the siltation of lakes and reservoirs, and overall depletion of water quality. In Brazil, these problems are mainly related to soil degradation by water erosion. However, studies of catchment-scale erosion are still rare particularly in grain-producing regions which have adopted conservative tillage systems for soil protection. In order to contribute to a better understanding of the impact of conservation agriculture on water resources, this study determined the runoff coefficient and sediment yield for two agricultural catchments.

Materials and methods

Hydrological and sedimentological monitoring was conducted in two catchments: the Conceicao catchment is characterized by grain production in weathered soils and a gently sloping landscape, while the Guapore catchment is characterized by heterogeneous soils and topography. Both catchments have problems associated with water erosion.

Results and discussion

The magnitudes of annual runoff coefficients and sediment yield were high, even if compared to similar agricultural regions, including a catchment with widespread adoption of no-tillage. The sediment yield was 140 t km^?2 year^?1, and the runoff coefficient was 14 % for the Conceicao catchment, while the sediment yield was 270 t km^?2 year^?1, and the runoff coefficient was 31 % for the Guapore catchment. The results indicate that problems such as gullies, soil compaction, runoff, floods, siltation, and water quality depletion associated with the misuse of agricultural areas in terms of soil conservation and water use are still evident and important even in regions with widespread adoption of no-tillage systems.

Conclusions

The magnitudes of both runoff and sediment yield clearly indicate the need to adopt complementary practices of soil conservation measures, such as mechanical runoff control.     

Spatial variation and interaction of runoff generation and erosion within a semi-arid, complex terrain catchment: a hierarchical approach

Purpose

Closed erosion plots have been used extensively to investigate soil loss and its spatial variation within a watershed. However, erosion rates measured on closed plots at various locations within a watershed may not reflect the “real world” conditions due to plot boundary problems. The purpose of this study was to identify runoff and sediment sources in a semi-arid, complex terrain catchment by using the data collected from open plots, nested catchments, and tunnel systems.

Materials and methods

The study catchment, in the Loess Plateau of China, was partitioned into various-level geomorphic units. Runoff and sediment discharges were measured from 55 storm events between 1963 and 1968 on open plots and nested catchments. Storm flows were also monitored in 14 rainfall events from the tunnel systems between 1989 and 1990. This study combined the data collected from the two periods to investigate runoff and sediment sources from the different geomorphic units of the catchment.

Results and discussion

On the four open plots (S1, S2, S3, and S4) of the hill slope, total runoff depths of 128.5 mm (S1), 84.3 mm (S2), 101.92 mm (S3), and 141.73 mm (S4) were recorded from all the events over the first period, which correspondingly produced total sediment yields of 3.056 kg m^?2 (S1), 9.058 kg m^?2 (S1), 42.848 kg m^?2 (S3), and 97.256 kg m^?2 (S4). The number of runoff events also varied due to a non-uniformity in runoff generation among the different geomorphic units of the catchment. Tunnel flows generally had higher mean sediment concentrations than catchment outflows. Three nested catchments located from the headwaters (C1) to the mouth of the catchment (C3) generated total runoff depths of 120.02 mm (C1), 143.92 mm (C2), and 149.43 mm (C3), and correspondingly produced sediments yields of 62.01 kg m^?2 (C1), 144.02 kg m^?2 (C2), and 123.92 kg m^?2 (C3) for the first period.

Conclusions

Significant variations in runoff and erosion existed within the catchment. The spatial variation of runoff generation on the hill slopes resulted from the variation of soil infiltration. Sediment produced from the lower hill slope zone was disproportionally higher than that from the upper hill slope zone. Nevertheless, a significant portion of the sediment eroded on the lower slope zone was caused by runoff generated from the upper slope zone. Tunnel erosion also played a significant role in sediment production.     

Importance of bank erosion for sediment input, storage and export at the catchment scale

Purpose

The importance of bank erosion was quantified during three periods (October 2006–April 2007, May 2007–April 2008 and May 2008–April 2009) in the 486 km² catchment area of River Odense, Denmark. A catchment sediment budget was established including other sediment sources such as tile drains and surface runoff, in-channel and overbank sinks and storage and the resulting bed load and suspended sediment load exported from the catchment.

Material and methods

Bank erosion and sedimentation were measured using ca. 3,000 erosion pins established in 180 pin plots, each consisting of three vertical lines of pins. Thirty-six representative reaches, each with a length of 100 m, were selected by a stratified random procedure in GIS. Bed load and suspended sediment export from the catchment were measured using a bed load sampler and from continuous measurements of turbidity at the outlet gauging station.

Results and discussion

The gross sediment input from bank erosion during the three study periods amounted to 21,100–25,200 t in the River Odense catchment, which is considerably higher than the estimated input of sediment from tile drains and surface runoff, which amounted to 220–500 t and 0–100 t, respectively. The measured bed load (20–490 t) was five to 60 times lower than the suspended sediment export from the catchment (1,240–2,620 t) during the three study periods, with the largest difference occurring in the driest year. Sediment sinks and storage were of high importance for the catchment sediment budget as the measured in-channel storage of sediment on stream banks was as high as 16,200–20,100 t, and the overbank sediment sink was estimated at 360–3,100 t.

Conclusions

Bank erosion was the dominant sediment source (90–94 %) in the River Odense catchment during the three study years. In-channel and overbank sediment sinks and storage dominated the sediment budget as 79–94 % of the sediment input from all sources was not exported from the catchment during the three study years. Such a large attenuation of sediment in river channels and on floodplains is extremely important for fluvial habitats and ecology. Moreover, it has strong implications for attempts to document changes in sediment export following implementation of mitigation measures.     

Evaluating gully erosion using Cs and Pb/Cs ratio in a reservoir catchment

Water erosion in the hilly areas of west China is the main process contributing to the overall sediment of the Yellow River and the Yangtze River. The impact of gully erosion in total sediment output has been mostly neglected. Our objective was to assess the sediment production and sediment sources at both the hillslope and catchment scales in the Yangjuangou reservoir catchment of the Chinese Loess Plateau, northwest China. Distribution patterns in sediment production caused by water erosion on hills and gully slopes under different land use types were assessed using the fallout ¹³⁷Cs technique. The total sediment production from the catchment was estimated by using the sediment record in a reservoir. Sediment sources and dominant water erosion processes were determined by comparing ¹³⁷Cs activities and ²¹⁰Pb/¹³⁷Cs ratios in surface soils and sub-surface soils with those of sediment deposits from the reservoir at the outlet of the catchment. Results indicated that landscape location had the most significant impact on sediment production for cultivated hillslopes, followed by the terraced hillslope, and the least for the vegetated hillslope. Sediment production increased in the following order: top>upper>lower>middle for the cultivated hillslope, and top>lower>upper>middle for the terraced hillslope. The mean value of sediment production declined by 49% for the terraced hillslope and by 80% for the vegetated hillslope compared with the cultivated hillslope. Vegetated gully slope reduced the sediment production by 38% compared with the cultivated gully slope. These data demonstrate the effectiveness of terracing and perennial vegetation cover in controlling sediment delivery at a hillslope scale. Averaged ¹³⁷Cs activities and ²¹⁰Pb/¹³⁷Cs ratios in the 0–5 cm surface soil (2.22–4.70 Bq kg⁻¹ and 20.70–22.07, respectively) and in the 5–30 cm subsoil (2.60 Bq kg⁻¹ and 28.57, respectively) on the cultivated hills and gully slopes were close to those of the deposited sediment in the reservoir (3.37 Bq kg⁻¹ and 29.08, respectively). These results suggest that the main sediment sources in the catchment were from the surface soil and subsoil on the cultivated slopes, and that gully erosion is the dominant water erosion process contributing sediment in the study area. Changes in land use types can greatly affect sediment production from gully erosion. An increase in grassland and forestland by 42%, and a corresponding decrease in farmland by 46%, reduced sediment production by 31% in the catchment.     

Toward generalizable sediment fingerprinting with tracers that are conservative and nonconservative over sediment routing timescales

Purpose

The science of sediment fingerprinting has been evolving rapidly over the past decade and is well poised to improve our understanding, not only of sediment sources, but also the routing of sediment through watersheds. Here, we discuss channel–floodplain processes that may convolute or modify the sediment fingerprinting signature of alluvial bank/floodplain sources and explore the use of nonconservative tracers for differentiating sediment derived from surface soil erosion from that of near-channel fluvial erosion.

Materials and methods

We use a mathematical model to demonstrate the theoretical effects of channel–floodplain exchange on conservative and nonconservative tracers. Then, we present flow, sediment gauging data, and geochemical measurements of long- (meteoric beryllium-10, ¹⁰Be) and short-lived (excess lead-210 and cesium-137, ²¹⁰Pb_ex and ¹³⁷Cs, respectively) radionuclide tracers from two study locations: one above, and the other below, a rapidly incising knick zone within the Maple River watershed, southern Minnesota.

Results and discussion

We demonstrate that measurements of ¹⁰Be, ²¹⁰Pb_ex, and ¹³⁷Cs associated with suspended sediment can be used to distinguish between the three primary sediment sources (agricultural uplands, bluffs, and banks) and estimate channel–floodplain exchange. We observe how the sediment sources systematically vary by location and change over the course of a single storm hydrograph. While sediment dynamics for any given event are not necessarily indicative of longer-term trends, the results are consistent with our geomorphic understanding of the system and longer-term observations of sediment dynamics. We advocate for future sediment fingerprinting studies to develop a geomorphic rationale to explain the distribution of the fingerprinting properties for any given study area, with the intent of developing a more generalizable, process-based fingerprinting approach.

Conclusions

We show that measurements of conservative and nonconservative tracers (e.g., long- and short-lived radionuclides) can provide spatially integrated, yet temporally discrete, insights to constrain sediment sources and channel–floodplain exchange at the river network-scale. Fingerprinting that utilizes nonconservative tracers requires that the nonconservative behavior is predictable and verifiable.     

Spatial and vertical distribution of <Superscript>137</Superscript>Cs in soils in the erosive area of southeastern Serbia (Pčinja and South Morava River Basins)

Purpose

The area of southeastern Serbia, the P?inja and South Morava River Basins, is under the influence of very strong erosion, and the aim of this study was to investigate the vertical and spatial distribution of the ¹³⁷Cs in the eroded soils of this area.

Materials and methods

Vertical soil profiles were collected with 5-cm increments from the uppermost layer down to 20, 25, 30, 40, and 50 cm of depth, depending on the thickness of the soil layers, i.e., down to the underlying parent rocks. Measurements of ¹³⁷Cs activity concentration were performed by using the HPGe gamma-ray spectrometer ORTEC-AMETEK (34 % relative efficiency and high resolution 1.65 keV at 1.33 MeV for ⁶⁰Co), from its gamma-ray line at 661.2 keV.

Results and discussion

The mean ¹³⁷Cs activity concentration across all 18 soil profiles (for all soil layers) was found to be 20 Bq kg^?1. In the greatest number of soil profiles, the ¹³⁷Cs activity concentration was generally highest in the first soil layer (0–5 cm) and decreased with soil depth, while in a few soil profiles, the peak of either the ¹³⁷Cs activity concentration occurred in the second soil layer (5–10 cm) or the ¹³⁷Cs activity concentration was almost equal throughout the entire soil profile. The mean ¹³⁷Cs activity concentration in the first soil layer (0–5 cm) was found to be 61 Bq kg^?1, and the high coefficient of variation of 92 % pointed out high spatial variability and large range of the ¹³⁷Cs activity concentrations in the study area.

Conclusions

The obtained results indicate that in the greatest number of soil profiles, ¹³⁷Cs is present in the upper layers, with concentration decreasing with depth, as is typical in uncultivated soil. Its spatial distribution was very uneven among the surface soil layers of the investigated sites. One of the main reasons for such pattern of ¹³⁷Cs in the study area may be soil erosion. Additional investigations which would support this hypothesis are required.

     

Core-derived historical records of suspended sediment origin in a mesoscale mountainous catchment: the River Bléone, French Alps

Purpose

Quantifying suspended sediment fluxes and dynamics across mountains, and identifying the origin of sediment in severely eroded areas, are of primary importance for the management of water resources. This contribution aims to generalise previous results from suspended sediment fingerprinting obtained during 2007?C2009 in a mesoscale Alpine catchment (the Bléone River; 905?km²) in France, and to assess variability in sediment sources throughout the second half of the twentieth century.

Materials and methods

Sediment fingerprinting, based on elemental geochemistry and radionuclide measurements, was conducted on a sediment core collected in an alluvial floodplain at the basin outlet. This technique was combined with hydro-sedimentary time-series to reconstruct the origin of suspended sediment deposited at this location over the last 50?years.

Results and discussion

Interpretation of sedimentation based on historical hydrological databases corroborates core dating obtained with ¹³⁷Cs and ²¹⁰Pb_xs activity measurements. Black marls and (marly) limestone sources provided the main fraction of sediment throughout the sequence (40 and 22?%, respectively). However, we also found evidence for the occurrence of major floods carrying large quantities of sediment originating from Quaternary deposits and conglomerates (25 and 16?%, respectively). The variability of sediment sources throughout the sequence may reflect the spatial variability of rainfall within the catchment, which in turn reflects its origin. However, the relatively homogeneous sediment composition throughout the sequence confirms that core-derived information is representative of widespread flood events.

Conclusions

These results are consistent with those obtained in previous studies. They also outline the need to take into account the entire grain size range of fine sediment in order to provide an overall picture of sediment sources and transfers within highly erosive catchments. This study also emphasizes the importance of using archival data to validate the results of sediment fingerprinting studies conducted during short contemporary monitoring programmes, and to extend fingerprinting of sediment sources over longer time-scales which include large and widespread floods.     

Arsenic,lead, and uranium concentrations on sediments deposited in reservoirs in the Rio Grande Basin,USA–Mexico border

Purpose

The El Granero reservoir is the last reservoir of the Rio Conchos before it joins the Rio Grande at the Mexico–USA border. This reservoir, together with the San Marcos reservoir, is located in the arid region of Chihuahua, Mexico. High, naturally occurring radioactivity levels, as well as high arsenic (As) concentrations, have been found in both reservoirs. The main goal of this research was to establish the spatial and temporal distribution of trace and radioactive elements in surface sediments and cores collected from these reservoirs.

Materials and methods

Sediment cores were dated using ²¹⁰Pb and ¹³⁷Cs measurements and applying the constant rate of supply (CRS) model. Major, trace, and radioactive elements were determined in surface samples and three sediment cores. Radioactive elements were determined by both alpha and gamma spectrometry. Major and trace elements were determined by inductively coupled plasma optical emission spectrometry (ICP-OES) using the EPA 3051a method. Enrichment factors (EF), contamination factors (CF), and pollution load indexes (PLI) were calculated in order to identify the human impact in both reservoirs, whereas the chemical index weathering (CIW) was used to assess differences in the degree of weathering.

Results and discussion

High uranium (U) enrichment (EFs?=?24.9–54.7) was observed in core layers at the San Marcos reservoir, while in surface sediments, this enrichment was lower. The high variability of lead (Pb) and As in sediment cores from the Granero reservoir was attributed to human influence. Arsenic and Pb enrichment differences between entry and exit sediment cores were explained by the filtering capabilities of the elongated shape, the topography, and the presence of plants on the reservoir’s bed. The highest PLI was found at the entrance core of the Granero reservoir.

Conclusions

The natural element concentration levels of As, Pb, and U were established at the Granero reservoir. High EFs for As and Pb suggest an anthropogenic origin of these pollutants at specific time intervals. High U concentrations in the San Marcos area are explained as naturally occurring. The concentrations of As in most of the studied sediments could pose a risk to human health by As ingestion, since they are above the probable effect level (PEL).

     

Analysis of runoff,sediment dynamics and sediment yield of subcatchments in the highly erodible Isábena catchment,Central Pyrenees

Purpose

The Isábena catchment (445 km²), Spain, features highly diverse spatial heterogeneity in land use, lithology and rainfall. Consequently, the relative contribution in terms of water and sediment yield varies immensely between its subcatchments, and also temporally. This study presents the synthesis of ~2.5 years of monitoring rainfall, discharge and suspended sediment concentration (SSC) in the five main subcatchments of the Isábena and its outlet.

Materials and methods

Continuous discharge at the subcatchment outlets, nine tipping bucket rainfall and automatic SSC samplers (complemented by manual samples), were collected from June 2011 until November 2013. The water stage records were converted to discharge using a rating curve derived with Bayesian regression. For reconstructing sediment yields, the data from the intermittent SSC sampling needed to be interpolated. We employed non-parametric multivariate regression (Quantile Regression Forests, QRF) using the discharge and rainfall data plus different aggregation levels of these as ancillary predictors. The subsequent Monte Carlo simulations allowed the determination of monthly sediment yields and their uncertainty.

Results and discussion

The stage–discharge rating curves showed wide credibility intervals for the higher stages, with great uncertainties associated with the discharge rates, especially during floods. The water yield of the subcatchments differed considerably. The entire catchment’s output was dominated by the northernmost subcatchment (~360 mm year^?1). The smaller, southern subcatchments featured much higher variability and lower runoff rates (55–250 mm year^?1). The SSCs exhibited a wide range and can exceed 100 g l^?1 for the central subcatchments, where most of the badlands are located. For the reconstruction of the sedigraphs, the QRF method proved suitable with Nash–Sutcliffe indices of 0.50 to 0.84. The specific sediment yield ranges from relatively low (32 t km^?2 year^?1) in the highly vegetated north to high values (3,651 t km^?2 year^?1) in areas with many badland formations.

Conclusions

The Isábena catchment shows high erosion dynamics with great variability in space and time, with stark contrasts even between adjacent subcatchments. The natural conditions make water and sediment monitoring and instrumentation very challenging; the measurement of discharge is particularly prone to considerable uncertainties. The QRF method employed for reconstructing sedigraphs and monthly yields proved well suited for the task.     

Process-based modelling of erosion,sediment transport and reservoir siltation in mesoscale semi-arid catchments

Purpose

To support scientifically sound water management in dryland environments a modelling system has been developed for the quantitative assessment of water and sediment fluxes in catchments, transport in the river system, and retention in reservoirs. The spatial scale of interest is the mesoscale because this is the scale most relevant for management of water and land resources.

Materials and methods

This modelling system comprises process-oriented hydrological components tailored for dryland characteristics coupled with components comprising hillslope erosion, sediment transport and reservoir deposition processes. The spatial discretization is hierarchically designed according to a multi-scale concept to account for particular relevant process scales. The non-linear and partly intermittent run-off generation and sediment dynamics are dealt with by accounting for connectivity phenomena at the intersections of landscape compartments. The modelling system has been developed by means of data from nested research catchments in NE-Spain and in NE-Brazil.

Results and discussion

In the semi-arid NE of Brazil sediment retention along the topography is the main process for sediment retention at all scales, i.e. the sediment delivery is transport limited. This kind of deposition retains roughly 50 to 60 % of eroded sediment, maintaining a similar deposition proportion in all spatial scales investigated. On the other hand, the sediment retained in reservoirs is clearly related to the scale, increasing with catchment area. With increasing area, there are more reservoirs, increasing the possibility of deposition. Furthermore, the area increase also promotes an increase in flow volume, favouring the construction of larger reservoirs, which generally overflow less frequently and retain higher sediment fractions. The second example comprises a highly dynamic Mediterranean catchment in NE-Spain with nested sub-catchments and reveals the full dynamics of hydrological, erosion and deposition features. The run-off modelling performed well with only some overestimation during low-flow periods due to the neglect of water losses along the river. The simulated peaks in sediment flux are reproduced well, while low-flow sediment transport is less well captured, due to the disregard of sediment remobilization in the riverbed during low flow.

Conclusions

This combined observation and modelling study deepened the understanding of hydro-sedimentological systems characterized by flashy run-off generation and by erosion and sediment transport pulses through the different landscape compartments. The connectivity between the different landscape compartments plays a very relevant role, regarding both the total mass of water and sediment transport and the transport time through the catchment.     

Connectivity of sediment transport in a semiarid environment: a synthesis for the Upper Jaguaribe Basin,Brazil

Purpose

Hydrosedimentological studies conducted in the semiarid Upper Jaguaribe Basin, Brazil, enabled the identification of the key processes controlling sediment connectivity at different spatial scales (10⁰–10⁴ km²).

Materials and methods

Water and sediment fluxes were assessed from discharge, sediment concentrations and reservoir siltation measurements. Additionally, mathematical modelling (WASA-SED model) was used to quantify water and sediment transfer within the watershed.

Results and discussion

Rainfall erosivity in the study area was moderate (4600 MJ mm ha^?1 h^?1 year^?1), whereas runoff depths (16–60 mm year^?1), and therefore the sediment transport capacity, were low. Consequently, ～60 % of the eroded sediment was deposited along the landscape, regardless of the spatial scale. The existing high-density reservoir network (contributing area of 6 km² per reservoir) also limits sediment propagation, retaining up to 47 % of the sediment at the large basin scale. The sediment delivery ratio (SDR) decreased with the spatial scale; on average, 41 % of the eroded sediment was yielded from the hillslopes, while for the whole 24,600-km² basin, the SDR was reduced to 1 % downstream of a large reservoir (1940-hm³ capacity).

Conclusions

Hydrological behaviour in the Upper Jaguaribe Basin represents a constraint on sediment propagation; low runoff depth is the main feature breaking sediment connectivity, which limits sediment transference from the hillslopes to the drainage system. Surface reservoirs are also important barriers, but their relative importance to sediment retention increases with scale, since larger contributing areas are more suitable for the construction of dams due to higher hydrological potential.     

Description of hydrological and erosion processes determined by applying the LISEM model in a rural catchment in southern Brazil

Purpose

Hydrosedimentological modeling is a tool that can be used to understand better important processes occurring at the catchment scale, such as runoff and sediment yield. The aim of this study was to use the Limburg Soil Erosion Model (LISEM) to describe the runoff and sediment yield during rainfall–runoff events in a small rural catchment in southern Brazil.

Materials and methods

The study was conducted in the Lajeado Ferreira Creek catchment (drainage area of 1.19 km²) where intense land use has caused a negative impact on water resources. Thirteen rainfall–runoff events that occurred in 2010 and 2011, including high-magnitude events, were used to model hydrosedimentological processes.

Results and discussion

Results

from the calibration and validation stages indicate that the model had a good performance when representing the hydrograph, including events with greater complexity. The use of a second soil layer in the model increased its efficiency, which is in accordance with the importance of subsurface flow in this catchment and its sensitivity to the physical properties of the soil, which are essential for controlling hydrosedimentological processes at the catchment scale. The simulation of sediment yield was overestimated by the model, constrained by the lack of sensitivity of the model to soil cohesion and the stability of soil aggregates. During the model calibration stage, these parameters had values different from those measured in the field.

Conclusions

The LISEM model performed well in representing runoff for events of different magnitudes. The discretization of the physical–hydrologic properties in the soil profile enabled the evaluation of the effect of subsurface impediment layers on water infiltration and runoff. The simulation was less accurate for suspended sediment concentration than for runoff. This indicates the need for further studies to either identify other factors controlling erosion and sediment yield that have not been identified by the model, or identify if the representation of the physical parameters is inadequate, especially the values of soil cohesion and aggregate stability.     

Geochemistry of stream sediments within the reclaimed coastal floodplain as indicator of anthropogenic impact (River Neretva,Croatia)

Purpose

This study used multi-element signatures of stream sediments to assess both natural and human-induced impact on fluvial system in the River Neretva delta receiving environment over time. The river basin actually comprises several sub-catchments, and the geochemical features of major elements, trace metals radiometric and mineralogical characterisation of river bed sediments were used to assist the interpretation of the environment of deposition and its subsequent modifications caused by various anthropogenic pressures within the river basin.

Materials and methods

Five sites were chosen for sediment sampling at key locations within the study area with assumed undisturbed, continuous sedimentation process. At each of the sites, three representative cores were taken by scuba divers. Sample sites were selected in order to reflect the influence of different sub-catchments they belong to and the land-use pattern of the surrounding area. Samples were analysed for pH, redox-potential, granulometry, mineralogy, thermogravimetry, major and trace element concentrations and radionuclide activities. The univariate and multivariate statistics were applied. The geochemical normalisation of data was done using Al, the procedure based on calculation of the regression line of the metal on the normaliser followed by testing the ratios metal/normaliser on all data-points.

Results and discussion

All studied sediments are classified as silt, ranging from clayey silt to silt and sandy silt. Mineralogically, the sediments were dominated by carbonates and quartz. The chemical contaminant data are generally of good quality, mostly below guideline levels. Sedimentation rates were estimated using vertical distribution of ¹³⁷Cs activities. Normalisation of TMs done by using Al shows strong R ² _adj values for the regressions of Al and V, Al and Cr, and Al and Ni. However, Al cannot fairly explain the fluctuation of the concentrations of Cd, Cu, Pb and Zn in sediment cores from all of the sampling sites. Generally, inorganic scavengers such as clay minerals followed by Fe and Mn oxides and S (pyrite and gypsum) seem to be dominant factors controlling TMs in studied sediments.

Conclusions

Although the River Neretva delta occupies a rather small area, the geochemical features of major and trace elements and ¹³⁷Cs activities show complex sediment provenances. Each of the sampling sites reflect exactly different effects of anthropogenic intervention that particularly refer to the changes in river morphology and ecology, along with the altered flow regimes within the catchment on sediment loads and quality.

     

The use of visible and near-infrared reflectance measurements for identifying the source of suspended sediment in rivers and comparison with geochemical fingerprinting

Purpose

Visible and near-infrared (Vis-NIR) reflectance measurements may be an alternative technique to identify suspended sediment sources in streams of headwater catchments. In this study, we examined if Vis-NIR reflectance measurements are capable of estimating sediment source contributions to sediment yield and compared this technique with a more conventional (i.e. geochemical) technique.

Materials and methods

Two headwater catchments in Ethiopia, Unta (2,052 ha) and Desera (1,657 ha), were analysed with the same techniques in order to find similarities and differences in the results obtained. The first technique used Vis-NIR spectral analysis as a fingerprint, using a partial least squares regression model. The second technique was a quantitative composite fingerprinting technique using geochemical analysis of source materials and suspended sediment samples. As a comparison, the partial least squares model was also used on the geochemical data. In August and September 2009, 30 soil samples of three different land uses (landslides, croplands, and grazing lands) and 21 suspended sediment samples at the catchment outlet were collected. Source samples were sieved to <63 μm. Geochemical analyses consisted of total element concentrations, percentage carbon, percentage nitrogen, and atom percentage ¹⁵N and δ¹³C. Reflectance measurements were taken on dried source samples with a spectrometer.

Results and discussion

Neither technique was able to predict the contributions of the three land use types; they could only distinguish between landslide and topsoil material. The agreement between the results of both techniques was significant for the Unta catchment (R ²?=?0.80) but not for the Desera catchment (R ²?=?0.39). The uncertainty of the technique using Vis-NIR reflectance measurements was slightly higher than with the geochemical approach. Both techniques revealed that topsoil erosion played an important role during storm runoff discharges. Using the partial least squares model for the geochemical data revealed that uncertainty can differ greatly when using other statistical techniques.

Conclusions

The quantitative composite fingerprinting technique using spectral signatures from both source and suspended sediment samples was able to quantify the contribution of two source materials (landslides and topsoil). It provided a faster and more cost effective alternative to the conventional geochemical procedure.