Effect of physicochemical conditions on peptide-peptide interactions in a tryptic hydrolysate of beta-lactoglobulin and identification of aggregating peptides

The objective of this study was to characterize the changes in peptide solubility resulting from changing some physicochemical conditions in a tryptic hydrolysate of beta-lactoglobulin (beta-LG). The turbidity (500 nm) of a 1% solution of tryptic peptides was measured at pH 3-10, at 5, 25, and 50 degrees C, in the presence of different salt concentrations (0, 0.5, and 1 M NaCl), in the presence of denaturing and reducing agents (6 M urea, 5% SDS, or 5% beta-mercaptoethanol), and under an electric field (isoelectric focusing). The results reveal an increase in turbidity of the peptide solution at pH 4, but a slight increase in turbidity was also observed at pH 8, which is attributable to peptides linked by disulfide bridges. The effect of temperature and ionic strength on the turbidity occurring at pH 4 indicates that mainly hydrophobic interactions are involved in the aggregation process. The material in the precipitate at pH 4 was identified as the peptides beta-LG 1-8, 15-20, and 41-60 and non-hydrolyzed alpha-lactalbumin. These results suggest that a limited number of peptides are involved in the aggregation process observed at pH 4, some of which having bioactive (beta-LG 15-20, ACE inhibitor, and opioid) or emulsifying properties (beta-LG 41-60). Aggregation of these peptides at acidic pH indicates that a simple acidification step could represent an easy process for isolating peptidic fractions enriched in bioactive or functional peptides.     

Heat-induced redistribution of disulfide bonds in milk proteins. 2. Disulfide bonding patterns between bovine beta-lactoglobulin and kappa-casein

Heat treatment of milk causes the heat-denaturable whey proteins to aggregate with kappa-casein (kappa-CN) via thiol-disulfide bond interchange reactions. The particular disulfide bonds that are important in the aggregates are uncertain, although Cys(121) of beta-lactoglobulin (beta-LG) has been implicated. The reaction at 60 degrees C between beta-LG A and an activated kappa-CN formed small disulfide-bonded aggregates. The tryptic peptides from this model system included a peptide with a disulfide bond between a Cys residue in the triple-Cys peptide [beta-LG(102-124)] and kappa-CN Cys(88) and others between kappa-CN Cys(88) or kappa-CN Cys(11) and beta-LG Cys(160). Only the latter two novel disulfide bonds were identified in heated (90 degrees C/20 min) milk. Application of computational search tools, notably MS2Assign and SearchXLinks, to the mass spectrometry (MS) and collision-induced dissociation (CID)-MS data was very valuable for identifying possible disulfide-bonded peptides. In two instances, peptides with measured masses of 4275.07 and 2312.07 were tentatively assigned to beta-LG(102-135):kappa-CN(11-13) and beta-LG A(61-69):kappa-CN(87-97), respectively. However, sequencing using the CID-MS data demonstrated that they were, in fact, beta-LG(1-40) and beta-LG(41-60), respectively. This study supports the notion that reversible intramolecular disulfide-bond interchange precedes the intermolecular interchange reactions.     

Hydrolysis of whey protein isolate with Bacillus licheniformis protease: fractionation and identification of aggregating peptides

The objective of this work was to identify the dominant aggregating peptides from a whey protein hydrolysate (degree of hydrolysis of 6.8%) obtained with Bacillus licheniformis protease. The aggregating peptides were fractionated with preparative reversed-phase chromatography and identified with liquid chromatography-mass spectrometry. The results showed that the dominant aggregating peptide, at pH 7.0, was beta-lg AB [f1-45]. In addition, the peptides beta-lg AB [f90-108]-S-S-alpha-la [f50-113], alpha-la [f12-49]-S-S-alpha-la [f50-113], beta-lg AB [f90-108]-S-S-beta-lg AB [f90-108], beta-lg A [f90-157], and beta-lg AB [f135-157/158] were also identified as main aggregating peptides. The results further showed that aggregation, via hydrophobic interactions, prevented further digestion (at pH 8.0), thereby explaining the large size of the aggregating peptides. It is hypothesized that B. licheniformis protease breaks down hydrophilic segments in the substrate and, therefore, preserves hydrophobic segments that aggregate once exposed to the solvent.     

Fractionation of beta-lactoglobulin tryptic peptides by ampholyte-free isoelectric focusing.

Solutions of tryptic hydrolysate of bovine beta-lactoglobulin were fractionated by liquid-phase IEF in a preparative Rotofor cell at constant power for 2 h without ampholytes in order to identify interactions between peptides. The 20 peptide fractions collected were analyzed by capillary electrophoresis and SDS-PAGE under native, denaturing, and reducing conditions. The hydrolysate was shown to be composed mainly of acidic peptides (pI 2-5, 62%) of molecular mass below 6 kDa, and numerous disulfide bonds were detected. Purified peptides (beta-LG 15-20, 71-75, 76-82, and 84-91) were also focused individually and in mixtures and matched to components of the IEF fractions obtained from the tryptic hydrolysate of beta-LG. The separation of acidic (beta-LG 84-91) and basic (beta-LG 76-82) peptides was achieved by IEF, whereas uncharged peptides (beta-LG 15-20 and 71-75) were poorly separated due to their low electrophoretic mobility. Because no peptide-peptide interaction could be identified by IEF fractionation, it is suggested that electrical fields may decrease electrostatic interactions between charged peptides.     

Interactions between bovine beta-lactoglobulin A and various bioactive peptides as studied by front-face fluorescence spectroscopy

Front-face fluorescence spectroscopy was used for the first time to study the interactions between bovine beta-lactoglobulin variant A (beta-Lg A) and various beta-Lg-derived bioactive peptides. Fluorescence spectra were recorded for beta-Lg A-peptide mixtures at 25 degrees C and pH 6.8 with an excitation wavelength of 290 nm to characterize the molecular environment of tryptophan (Trp) residues present in the protein but absent in the peptides. Spectra remained unchanged following addition of peptides beta-Lg f92-100 and beta-Lg f125-135, while Phe-Phe interaction between beta-Lg f69-83 molecules interfered with analysis. Addition of beta-Lg f102-105 produced a blue shift (3 nm) and a significant increase in fluorescence intensity, while addition of beta-Lg f142-148 also caused a significant increase in fluorescence intensity but accompanied by a red shift (3 nm). These results indicate that the polarity of the Trp environment in the beta-Lg A structure may be modified differently depending on the peptide added.     

Identification of peptides in aggregates formed during hydrolysis of beta-lactoglobulin B with a Glu and Asp specific microbial protease

The purpose of the present study was to identify the peptides responsible for aggregate formation during hydrolysis of beta-lactoglobulin by BLP at neutral pH. Hydrolysates taken at various stages of aggregate formation were separated into a precipitate and a soluble phase and each was analyzed by CE and mass spectrometry. The aggregates consisted of six to seven major peptides of which four were tentatively identified. The peptides were positively charged at neutral pH and had a high charge-to-mass ratio at low pH. The fragment f135-158 seemed to be the initiator of aggregation, since it was present at high concentration in the aggregates at all stages, and the concentration of this peptide remained low in the supernatant. F135-158 contains several basic and acid amino acids alternating with hydrophobic amino acids, which is in accordance with formation of noncovalently linked aggregates, as previously shown.     

Hydrophobic probe binding of beta-lactoglobulin in the native and molten globule state induced by high pressure as affected by pH,KIO(3) and N-ethylmaleimide

High hydrostatic pressure (HHP) at 500 MPa and 50 degrees C induces beta-LG into the molten globule state. Retinol, cis-parinaric acid (CPA), and 1-anilino-naphthalene-8-sulfonate (ANS) fluorescence from pH 2.5 to 10.5 in the presence of the native and molten globule states of beta-LG indicate that retinol binds to beta-LG in the calyx, CPA at the surface hydrophobic site, and ANS in multiple hydrophobic sites. HHP treatment results in a decrease of beta-LG affinity for retinol and CPA, suggesting conformational changes in the calyx and surface hydrophobic site of beta-LG during HHP treatment. beta-LG treated by HHP in the presence of N-ethylmaleimide (NEM) retains retinol affinity, suggesting that NEM protects the calyx conformation of beta-LG during HHP treatment. HHP treatment of beta-LG in the presence of KIO(3) exhibits a great decrease of CPA affinity compared to HHP-treated beta-LG in the absence of KIO(3), suggesting the formation of non-native disulfide bonding at the CPA binding site.     

Beta-lactoglobulin structure and retinol binding changes in presence of anionic and neutral detergents

Bovine beta-lactoglobulin (beta-LG) in vivo (in milks) has been found in complexes with lipids such as butyric and oleic acids. To elucidate the still unknown structure-function relationship in this protein, the structural changes of beta-lactoglobulin variant A (beta-LG A) in the presence of anionic surfactant such as sodium n-dodecyl sulfate (SDS) and in the presence of nonionic surfactant such as Triton X-100 have been investigated. Subsequently, the retinol binding by beta-LG has been investigated in the presence of various amounts of these surfactants as its binding indicator. The results of UV-vis and fluorescence studies show a higher denaturating effect of SDS at acid pH that can be due to greater positive charges of beta-LG at this pH indicating also the nonspecific hydrophobic interactions of Triton X-100 with beta-LG at all studied pHs. Isothermal titration calorimetry (ITC) measurements indicate the endothermic nature of beta-LG/SDS interactions and the exothermic nature of Triton X-100/beta-LG interactions. The analysis of the binding data demonstrates the absence of considerable changes in retinol binding properties of beta-LG in the presence of various amounts of these surfactants. This implies that surfactant binding does not change the conformation of beta-LG in the regions defining the retinol-binding site.     

Effects of high-pressure processing at low temperature on the molecular structure and surface properties of beta-lactoglobulin

High-pressure processing (HPP) was utilized to induce unfolding of beta-lactoglobulin (beta-LG). beta-Lactoglobulin solutions at concentrations of 0.5 mg/mL, in pH 7.5 phosphate buffer, were pressure treated at 510 MPa for 10 min at either 8 or 24 degrees C. The secondary structure, as determined by circular dichroism (CD), of beta-LG processed at 8 degrees C appeared to be unchanged, whereas beta-LG processed at 24 degrees C lost alpha-helix structure. Tertiary structures for beta-LG, as determined by near-UV CD, intrinsic protein fluorescence spectroscopy, hydrophobic fluorescent probe binding, and thiol group reactivity, were changed following processing at either temperature. The largest changes to tertiary structure were observed for the samples processed at 24 degrees C. Model solutions containing the pressure-treated beta-LG showed significant decreases in surface tension at liquid-air interfaces with values of 54.00 and 51.69 mN/m for the samples treated at 24 and 8 degrees C, respectively. In comparison, the surface tension for model solutions containing the untreated control was 60.60 mN/m. Changes in protein structure during frozen and freeze-dried storage were also monitored, and some renaturation was observed for both storage conditions. Significantly, the sample pressure-treated at 8 degrees C continued to display the lowest surface tension.     

Influence of binding of sodium dodecyl sulfate, all-trans-retinol, palmitate, and 8-anilino-1-naphthalenesulfonate on the heat-induced unfolding and aggregation of beta-lactoglobulin B

Heat treatment of bovine beta-lactoglobulin B (beta-LG) causes it to partially unfold and aggregate via hydrophobic association and intra- and interprotein disulfide bonds. The first stage, which involves a "loosening" of the native structure, is influenced by the environmental conditions, such as pressure, pH, and added solutes. In the present study, four potential beta-LG ligands [palmitate, sodium dodecyl sulfate (SDS), 8-anilino-1-naphthalenesulfonate (ANS), and all-trans-retinol (retinol)] were added to beta-LG solutions prior to heat treatment for 12 min at temperatures between 40 and 93 degrees C. The extent of the changes in secondary and tertiary structures, unfolding, and aggregation at 20 degrees C were determined by circular dichroism, fluorescence, and alkaline- and SDS-polyacrylamide gel electrophoresis (PAGE). Both palmitate and SDS stabilized the native structure of beta-LG against heat-induced structural flexibility, subsequent unfolding, and denaturation. Retinol was less effective, probably because of its lower affinity for the calyx-binding site, and ANS did not stabilize beta-LG, suggesting that ANS did not bind strongly in the calyx. It was also noted that holding a beta-LG solution with added SDS or ANS promoted the formation of a hydrophobically associated non-native dimer.     

Pressure-induced unfolding and aggregation of the proteins in whey protein concentrate solutions

Whey protein concentrate solutions (12% w/v, pH 6.65 +/- 0.05) were pressure treated at 800 MPa for 20-120 min and then examined using size exclusion chromatography (SEC), small deformation rheology, transmission electron microscopy, and various types of one-dimensional (1D) and two-dimensional (2D) polyacrylamide gel electrophoresis (PAGE). The pressure-treated samples showed a time-dependent loss of native whey proteins by SEC and 1D PAGE and a corresponding increase in non-native proteins and protein aggregates of different sizes. These aggregates altered the viscosity and opacity of the samples and were shown to be cross-linked by intermolecular disulfide bonds and by noncovalent interactions using 1D PAGE [alkaline (or native), sodium dodecyl sulfate (SDS), and SDS of reduced samples (SDS(R))] and 2D PAGE (native:SDS and SDS:SDS(R)). The sensitivity of the major whey proteins to pressure was in the order beta-lactoglobulin B (beta-LG B) > beta-LG A > bovine serum albumin (BSA) > alpha-lactalbumin (alpha-LA), and the large internal hydrophobic cavity of beta-LG may have been partially responsible for its sensitivity to high-pressure treatments. It seemed likely that, at 800 MPa, the formation of a beta-LG disulfide-bonded network preceded the formation of disulfide bonds between alpha-LA or BSA and beta-LG to form multiprotein aggregates, possibly because the disulfide bonds of alpha-LA and BSA are less exposed than those of beta-LG either during or after pressure treatment. It may be possible that intermolecular disulfide bond formation occurred at high pressure and that hydrophobic association became important after the high-pressure treatment.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with acidic oligosaccharides

Bovine beta-lactoglobulin (beta-LG) was conjugated with the acidic oligosaccharides, alginic acid oligosaccharide (ALGO) and phosphoryl oligosaccharides (POs) by the Maillard reaction to reduce the immunogenicity of beta-LG. The molar ratios of beta-LG to ALGO and POs in the conjugates were 1:6 and 1:8. The carbohydrate-binding sites in the beta-LG-ALGO conjugate were partially identified to be (60)Lys, (77)Lys, (100)Lys, (138)Lys, and (141)Lys. The isoelectric point of each conjugate was lower than that of beta-LG. CD spectra indicated that the secondary structure of beta-LG was almost maintained after conjugation. The results of fluorescence studies indicated that the conformation around Trp had not changed in each conjugate and that the surface of each conjugate was covered with a saccharide chain. Structural analyses with monoclonal antibodies indicated that the conformation around (8)Lys-(19)Trp (beta-sheet, random coil, short helix) in the conjugates had changed, whereas the native structure was maintained around (15)Val-(29)Ile (beta-sheet) and (125)Thr-(135)Lys (alpha-helix). The beta-LG-ALGO and beta-LG-POs conjugates maintained 77 and 70% of the retinol binding activity of beta-LG. Conjugation with ALGO and POs substantially enhanced the thermal stability of beta-LG. The anti-beta-LG antibody response was markedly reduced after immunization with both conjugates in BALB/c, C57BL/6, and C3H/He mice. B cell epitopes of beta-LG and the conjugate recognized in these mice were determined with 15-mer multipin peptides, and the linear epitope profiles of the conjugates were found to be similar to those of beta-LG, whereas the antibody response to each epitope was dramatically reduced. In particular, effective reduction of the antibody response was observed in the vicinity of the carbohydrate-binding sites. Conjugation of beta-LG with these acidic oligosaccharides was effective in reducing the immunogenicity of beta-LG. The conjugates obtained in this study are edible, so they would be very useful for food application.     

Heat-induced gelation of chicken Pectoralis major myosin and beta-lactoglobulin

The denaturation, aggregation, and rheological properties of chicken breast muscle myosin, beta-lactoglobulin (beta-LG), and mixed myosin/beta-LG solutions were studied in 0.6 M NaCl, 0.05 mM sodium phosphate buffer, pH 7.0, during heating. The endotherm of a mixture of myosin and beta-LG was identical to that expected if the endotherm of each protein was overlaid on the same axis. The maximum aggregation rate (AR(max)) increased, and the temperature at the AR(max) (T(max)) and initial aggregation temperature (T(o)) decreased as the concentration of both proteins was increased. The aggregation profile of <0.5% myosin was altered by the presence of 0.25% beta-LG. Addition of 0.5-3.0% beta-LG decreased storage moduli of 1% myosin between 55 and 75 degrees C, but increased storage moduli (G') when heated to 90 degrees C and after cooling. beta-LG had no effect on the gel point of > or =1.0% myosin, but enhanced gel strength when heated to 90 degrees C and after cooling. After cooling, the G' of 1% myosin/2%beta-LG gels was about 1.7 times greater than that of gels prepared from 2% myosin/1% beta-LG.     

Protein-peptide interactions in mixtures of whey peptides and whey proteins

The effects of several conditions on the amounts and compositions of aggregates formed in mixtures of whey protein hydrolysate, made with Bacillus licheniformis protease, and whey protein isolate were investigated using response surface methodology. Next, the peptides present in the aggregates were separated from the intact protein and identified with liquid chromatography-mass spectrometry. Increasing both temperature and ionic strength increased the amounts of both intact protein and peptides in the aggregates. There was an optimal amount of added intact WPI that could aggregate with peptides, yielding a maximal amount of aggregated material in which the peptide/protein molar ratio was around 6. Under all conditions applied, the same peptides were observed in the protein-peptide aggregates formed. The dominant peptides were beta-lg AB [f1-45], beta-lg AB [f90-108], and alpha-la [f50-113]. It was hypothesized that peptides could form a kind of glue network that can include beta-lactoglobulin via hydrophobic interactions at the hydrophobic binding sites at the surface of the protein.     

Beta-lactoglobulin molten globule induced by high pressure.

Beta-lactoglobulin (beta-LG) was treated with high hydrostatic pressure (HHP) at 600 MPa and 50 degrees C for selected times as long as 64 min. The intrinsic tryptophan fluorescence of beta-LG indicated that HHP treatment conditions induced a conformational change. HHP treatment conditions also promote a 3-fold increase in the extrinsic fluorescence of 1-anilinonaphthalene-8-sulfonate and a 2.6-fold decrease for cis-paraneric acid, suggesting an increase in accessible aromatic hydrophobicity and a decrease in aliphatic hydrophobicity. Far-ultraviolet circular dichroism (CD) spectra reveal that the secondary structure of beta-LG converts from native beta-sheets to non-native alpha-helices following HHP treatment, whereas near-ultraviolet CD spectra reveal that the native tertiary structure of beta-LG essentially disappears. Urea titrations reveal that native beta-LG unfolds cooperatively, but the pressure-treated molecule unfolds noncooperatively. The noncooperative state is stable for 3 months at 5 degrees C. The nonaccessible free thiol group of cysteine121 in native beta-LG became reactive to Ellman's reagent after adequate HHP treatment. Gel electrophoresis with and without beta-mercaptoethanol provided evidence that the exposed thiol group was lost concomitant with the formation of S-S-linked beta-LG dimers. Overall, these results suggest that HHP treatments induce beta-LG into hydrophobic molten globule structures that remain stable for at least 3 months.     

Calcium-binding capacities of different brans under simulated gastrointestinal pH conditions. In vitro study with (45)Ca

The present study was performed to investigate calcium-binding characteristics of different brans under simulated gastrointestinal pH conditions and to explore the significance of dietary fiber, oxalate, and phytate for calcium binding. Different brans (rice, rye, soy, fine wheat, coarse wheat, and oat) and CaCl(2) solution containing (45)Ca were incubated at 37 degrees C at gastric pH (2.2) followed by buffering steps of 1 degree from pH 3.0 to pH 8.0. Total calcium binding and calcium-binding capacity of the pH 2.2 soluble bran fraction were determined. Additionally, oxalate and phytate contents of brans and solubility profiles of phytic acid were investigated. Calcium-binding capacities of brans showed a clear pH dependence. At gastric pH calcium binding was low in all brans, ranging from 0.022 to 0.040 mmol of calcium/g of bran. Soy bran, nearly phytate-free, showed higher binding values up to pH 4.0 and lower values between pH 5.0 and 8.0. In all other brans, binding values increased strongly with increasing pH in the quantitative order rice bran > coarse wheat bran > fine wheat bran > rye bran > oat bran. The solubility profiles indicate that in the cases of rye, wheat, and rice bran phytate accounts for 70-82% of their total calcium-binding capacities. The results suggest that dietary fiber makes no important contribution to calcium binding, except for soy and oat brans. Oxalate plays only a minor role in calcium binding by brans.     

Quantification of the interactions between beta-lactoglobulin and pectin through capillary electrophoresis analysis

Biopolymer interactions have many potential applications in pharmaceutical, cosmetic, nutraceutical, and functional food industries. Attractive interactions between proteins and polysaccharides can lead to the formation of complexes. Binding parameters of beta-lactoglobulin (beta-lg)/pectin complexes were determined using frontal analysis continuous capillary electrophoresis and the overlapping binding site model. At pH 4, approximately 23 beta-lg molecules were cooperatively complexed on low-methoxyl pectin, where each beta-lg molecule covered an average of 12 galacturonic acid residues. The calculated binding constant was 1431 M(-1). The interactions between pectin and four selected peptides located on the outer surface of the beta-lg were investigated in order to identify which part of the protein was likely to interact with the pectin. The peptide beta-lg 132-148, which corresponds to the alpha-helix zone, and the peptides beta-lg 76-83, 41-60, and 1-14 would be involved in the interaction with the pectin.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with carboxymethyl dextran differing in molecular weight

To reduce the immunogenicity of beta-lactoglobulin (beta-LG), two beta-LG-carboxymethyl dextran (CMD) conjugates (Conj. 40 and Conj. 162) were prepared by using water-soluble carbodiimide (EDC). The molar ratios of beta-LG to CMD in Conj. 40 and Conj. 162 were 8:1 and 7:1, respectively. Each conjugate maintained approximately 50% of the retinol binding activity of beta-LG. Structural analyses by intrinsic fluorescence, CD spectra, and ELISA with monoclonal antibodies indicated that the surface of beta-LG in each conjugate was covered by CMD without great disruption of native conformation. By conjugation with CMD, the antibody response to beta-LG was reduced in BALB/c, C3H/He, and C57BL/6 mice, which was eminent in Conj. 162. The results of B cell epitope scanning using overlapping synthesized peptides showed that the linear epitope profiles of the conjugates were similar to those of beta-LG, whereas the antibody response to each epitope was reduced, which was eminent in Conj. 162. It was concluded that conjugation with CMD of higher molecular weight is effective in reducing the immunogenicity of beta-LG and that masking of epitopes by CMD is responsible for the reduced immunogenicity.     

Functionality of beta-casein peptides: importance of amphipathicity for emulsion-stabilizing properties.

To investigate structure-function relationships with regard to emulsion-stabilizing properties, peptides from bovine beta-casein (betaCN), obtained by plasmin hydrolysis and fractionation of the hydrolysate, were isolated and identified on the basis of their masses determined by electrospray ionization mass spectrometry, the primary structure of the intact protein, and the known specificity of the enzyme. An amphipathic peptide fraction was fractionated further by ion-exchange chromatography and subsequent hydrophobic interaction chromatography resulting in the components betaCN[f 1-105/107] and betaCN[f 29-105/107]. The latter peptides had poor emulsion-stabilizing properties compared to the former ones, and the stability of an emulsion formed with betaCN[f 29-105/107] was also more sensitive to hydrophobic impurities than that of an emulsion formed with betaCN[f 1-105/107]. The highly charged N-terminal part appeared to be important for the emulsion-stabilizing properties of these peptides. A hypothesis for the structure-function relationship is given.     

Lentil and chickpea protein-stabilized emulsions: optimization of emulsion formulation

Chickpea and lentil protein-stabilized emulsions were optimized with regard to pH (3.0-8.0), protein concentration (1.1-4.1% w/w), and oil content (20-40%) for their ability to form and stabilize oil-in-water emulsions using response surface methodology. Specifically, creaming stability, droplet size, and droplet charge were assessed. Optimum conditions for minimal creaming (no serum separation after 24 h), small droplet size (<2 μm), and high net droplet charge (absolute value of ZP > 40 mV) were identified as 4.1% protein, 40% oil, and pH 3.0 or 8.0, regardless of the plant protein used for emulsion preparation.