Effects of subsoil compaction on yield and yield attributes of wheat in the sub-humid region of Pakistan

The prolonged use of vehicular traffic for farming creates subsoil compaction, which reduces crop yield and deteriorates the physical conditions of the soil. Field experiments were conducted during 2002–2003 and 2003–2004 in Pakistan to study subsoil compaction effects on soil bulk density, total porosity, yield and yield components of wheat. Soil compaction was artificially created at the start of the experiment using 7.0 t roller having length of 1.5 m and diameter of 1.22 m. Treatments consisted of T₁ = control (no compaction), T₂ = two passes of roller, T₃ = four passes of roller, T₄ = six passes of roller. The experiments were arranged in randomised complete block with four replications. Results indicated that subsoil compaction adversely affected the bulk density, total porosity of soil and root length during both the years. Soil compaction increased the bulk density (BD) from 1.37 for T₁ to 1.57, 1.61 and 1.72 Mg m⁻³ whereas decreased the total porosity from 47.3% for T₁ to 40.0, 37.4 and 34.5% for T₂, T₃ and T_4, respectively. Similarly grain yield decreased from 4141.7 for T₁ to 3912.8, 3364.5 and 3010.3 kg ha⁻¹ for T₂, T₃ and T_4, respectively. The deteriorating effect of compaction depended upon the degree of compaction. Subsoil compaction adversely affected the yield and yield attributes of wheat during both years of experiments. The subsoil compaction adversely affected soil physical conditions, which substantially decreased the yield of wheat. Therefore, appropriate measures of periodic chiselling, controlled traffic, conservation tillage, and incorporating of crops with deep tap root system in rotation cycle is necessary to minimize the risks of subsoil compaction.     

Soil CO2 flux from a norfolk loamy sand after 25 years of conventional and conservation tillage

Tillage affects the ability of coarse-textured soils of the southeastern USA to sequester C. Our objectives were to compare tillage methods for soil CO₂ flux, and determine if chemical or physical properties after 25 years of conventional or conservation tillage correlated with flux rates. Data were collected for several weeks during June and July in 2003, October and November in 2003, and April to July in 2004 from a tillage study established in 1978 on a Norfolk loamy sand (fine-loamy, kaolinitic, thermic Typic Kandiudults). Conventional tillage consisted of disking to a depth of approximately 15 cm followed by smoothing with an S-tined harrow equipped with rolling baskets. Conservation tillage consisted of direct seeding into surface residues. Flux rates in conservation tillage averaged 0.84 g CO₂ m⁻² h⁻¹ in Summer 2003, 0.36 g CO₂ m⁻² h⁻¹ in Fall 2003, 0.46 g CO₂ m⁻² h⁻¹ in Spring 2004, and 0.86 g CO₂ m⁻² h⁻¹ in Summer 2004. Flux rates from conventional tillage were greater for most measurement times. Conversely, water content of the surface soil layer (6.5 cm) was almost always higher with conservation tillage. Soil CO₂ flux was highly correlated with soil water content only in conventional tillage. In conservation tillage, no significant correlations occurred between soil CO₂ flux and soil N, C, C:N ratio, pH, bulk density, sand fraction, or clay fraction of the surface 7.5 cm. In conventional tillage, sand fraction was positively correlated, while bulk density and clay fraction were negatively correlated with soil CO₂ flux rate, but only when the soil was moist. Long-term conservation tillage management resulted in more uniform within- and across-season soil CO₂ flux rates that were less affected by precipitation events.     

Soil fertility properties on Agave angustifolia Haw. plantations

This study examined the variations in soil physical, chemical and biological properties from Agave angustifolia fields in three sites with different topographic conditions (valley, hill and mountain), in Oaxaca, Mexico, associated with the tillage systems, disk ploughing (DP), animal drawn ploughing (ADP) and minimum tillage (MT), respectively. Plant ages were 1.5–3.5 years (class 1), 3.6–5.5 years (class 2) and 5.6–7.5 years (class 3). Soil samples were taken at two soil depths (0–20 and 21–40 cm) from plots of 4000 m² within each site and plant age classes, during the spring of 2005. The main changes in soil properties were found in the mountain site. Soil bulk density (2.0 g cm⁻³), cone penetration resistance (CPR) (3.96 MPa), 0.7 and 1.0 mm water stable aggregates (WSA) (28.3 g kg⁻¹ and 102.2 g kg⁻¹, respectively) were higher in the mountain site than in the hill and valley fields. This result is consistent with the rocky substrate beneath the shallow soil. Soil organic carbon (SOC) (23.9 g kg⁻¹), available N (23.1 mg kg⁻¹) and soil microbial biomass carbon (SMBC) (969.6 μg g⁻¹) at the mountain site showed the highest values, suggesting that MT practiced in this topographic condition favours the organic matter accumulation and biological activity. Soil microbial biomass carbon and SOC seem to be the soil properties that were mainly affected by the sites and soil management associated with them. For the three sites, SOC, P_Olsen, available N, exchangeable Na⁺ and SMBC were higher at 0–20 cm depth than at 21–40 cm depth within each site. Exchangeable Ca²⁺ and K⁺, P_Olsen and CPR increased with plant age. In contrast, available N decreased. Soil chemical properties were more affected by the age of the plant than physical and biological properties. Results reported here represent a reference of the fertility properties of soils cultivated with A. angustifolia, which could be used in further studies focused on management and tillage systems.     

Short-term temporal changes of soil carbon losses after tillage described by a first-order decay model

Tillage stimulates soil carbon (C) losses by increasing aeration, changing temperature and moisture conditions, and thus favoring microbial decomposition. In addition, soil aggregate disruption by tillage exposes once protected organic matter to decomposition. We propose a model to explain carbon dioxide (CO₂) emission after tillage as a function of the no-till emission plus a correction due to the tillage disturbance. The model assumes that C in the readily decomposable organic matter follows a first-order reaction kinetics equation as: dC_sail(t)/dt = −kC_soil(t) and that soil C-CO₂ emission is proportional to the C decay rate in soil, where C_soil(t) is the available labile soil C (g m⁻²) at any time (t). Emissions are modeled in terms soil C available to decomposition in the tilled and non-tilled plots, and a relationship is derived between no-till (F_NT) and tilled (F_T) fluxes, which is: F_T=a₁F_NT e^−a₂t, where t is time after tillage. Predicted and observed fluxes showed good agreement based on determination coefficient (R²), index of agreement and model efficiency, with R² as high as 0.97. The two parameters included in the model are related to the difference between the decay constant (k factor) of tilled and no-till plots (a₂) and also to the amount of labile carbon added to the readily decomposable soil organic matter due to tillage (a₁). These two parameters were estimated in the model ranging from 1.27 and 2.60 (a₁) and −1.52 × 10⁻² and 2.2 × 10⁻² day⁻¹ (a₂). The advantage is that temporal variability of tillage-induced emissions can be described by only one analytical function that includes the no-till emission plus an exponential term modulated by tillage and environmentally dependent parameters.     

Effects of mechanical energy inputs on soil respiration at the aggregate and field scales

Cultivation machinery applies large amounts of mechanical energy to the soil and often brings about a decrease in soil organic carbon (SOC). New experiments on the effects of mechanical energy inputs on soil respiration are reported and the results discussed. In the laboratory, a specific energy, K, of 150 J kg⁻¹, similar to that experienced during typical cultivation operations, was applied to soil aggregates using a falling weight. Respiration (carbon dioxide, CO₂ emission) of the samples was then measured by an electrical conductimetric method. Basal respiration (when K=0) measured on Chromic Luvisol aggregates, was found to increase with increasing SOC, from 1.88 μg CO₂ g⁻¹ h⁻¹ for a permanent fallow soil (SOC=11 g kg⁻¹) to 8.25 μg CO₂ g⁻¹ h⁻¹ for a permanent grassland soil (SOC=32 g kg⁻¹). Basal respiration of a Calcic Cambisol, more than doubled (2.0–5.2 μg CO₂ g⁻¹ h⁻¹) with increasing gravimetric soil water contents. Mechanical energy inputs caused an initial burst of increased respiration, which lasted up to 4 h. Over the following 4–24 h period, arable soils with lower SOC contents, (11–21 g kg⁻¹), respiration rates dropped back to a level, approximately 1.14 times higher than the basal value. However, grassland soils with higher SOC contents (28–32 g kg⁻¹), increases in this longer-term respiration rate following 150 J kg⁻¹ of energy, were negligible. A field experiment, in which CO₂ was measured by infra-red absorption, also showed that tillage stimulated increased levels of soil respiration for periods ranging from 12 h to more than one week. The highest respiration rates, 80 mg CO₂ m⁻² h⁻¹ were associated with high energy, powered tillage on clay soils. On the same soil, low energy draught tillage resulted in a respiration rate of approximately half this value. The results of these experiments are discussed in relation to equilibrium levels of soil organic matter. The application of known quantities of mechanical energy to soil aggregates under laboratory conditions, in order to simulate the effect of different cultivation practices, when combined with the subsequent measurement of soil respiration, can provide useful indication of the likely consequences of soil management on SOC.     

Effects of intensifying organic manuring and tillage practices on penetration resistance and infiltration rate

Soil erosion, along with the contributing factors of soil crusting and sealing, have received minimal scientific attention to date in Latin America. This study was conducted in an Andean hillside environment to determine how the local organic manuring and tillage practices influence the development of soil crusting and sealing, and the extent to which these practices influence soil water infiltration. The aim of this study was to identify treatments that prevented superficial soil structural constraints, i.e. treatments which maintain infiltration and therefore reduce potential soil erosion and run-off.

Treatment results were measured with a pocket penetrometer and a mini-rain simulator on nine different cropping systems, mainly based on cassava (Manihot esculenta Crantz), from February to November 2000 and 2001. The cropping systems were laid out on a Ferrallic Cambisol, an acid, vulcanically influenced soil of the Andean region.

In both cropping cycles, treatments with chicken manure application developed superficial soil crusts during the dry season. For a treatment manured with 8 t ha⁻¹ chicken manure, this crust meant an increase in penetration resistance from 2.3 kg cm⁻² in April 2000 to 16.2 kg cm⁻² in July 2000. The change in superficial soil structure created a notable reduction in final infiltration from 92 to 42.2 mm h⁻¹. A minimum tillage treatment which displayed the highest penetration resistance during the dry periods of up to 46.4 kg cm⁻² presented no restricting effects on soil water intake (76.2 mm h⁻¹ final infiltration in 2000) due to an optimal aggregate development during 10 years of consecutive conservation practice.

Measurements of penetration resistance and infiltration showed that soil conserving treatments, such as minimum tillage and crop rotations, improved the physical soil status and prevented soil crusting developing along with its negative effects on infiltration. These methods can therefore be strongly recommended to farmers.     

Effect of tillage and crop rotations on pore size distribution and soil hydraulic conductivity in sandy clay loam soil of the Indian Himalayas

Tillage management can affect crop growth by altering the pore size distribution, pore geometry and hydraulic properties of soil. In the present communication, the effect of different tillage management viz., conventional tillage (CT), minimum tillage (MT) and zero-tillage (ZT) and different crop rotations viz. [(soybean–wheat (S–W), soybean–lentil (S–L) and soybean–pea (S–P)] on pore size distribution and soil hydraulic conductivities [saturated hydraulic conductivity (K_sat) and unsaturated hydraulic conductivity {k(h)}] of a sandy clay loam soil was studied after 4 years prior to the experiment. Soil cores were collected after 4 year of the experiment at an interval of 75 mm up to 300 mm soil depth for measuring soil bulk density, soil water retention constant (b), pore size distribution, K_sat and k(h). Nine pressure levels (from 2 to 1500 kPa) were used to calculate pore size distribution and k(h). It was observed that b values at all the studied soil depths were higher under ZT than those observed under CT irrespective of the crop rotations. The values of soil bulk density observed under ZT were higher in 0–75 mm soil depth in all the crop rotations. But, among the crop rotations, soils under S–P and S–L rotations showed relatively lower bulk density values than S–W rotation. Average values of the volume fraction of total porosity with pores <7.5 μm in diameter (effective pores for retaining plant available water) were 0.557, 0.636 and 0.628 m³ m⁻³ under CT, MT and ZT; and 0.592, 0.610 and 0.626 m³ m⁻³ under S–W, S–L and S–P, respectively. In contrast, the average values of the volume fraction of total porosity with pores >150 μm in diameter (pores draining freely with gravity) were 0.124, 0.096 and 0.095 m³ m⁻³ under CT, MT and ZT; and 0.110, 0.104 and 0.101 m³ m⁻³ under S–W, S–L and S–P, respectively. Saturated hydraulic conductivity values in all the studied soil depths were significantly greater under ZT than those under CT (range from 300 to 344 mm day⁻¹). The observed k(h) values at 0–75 mm soil depth under ZT were significantly higher than those computed under CT at all the suction levels, except at −10, −100 and −400 kPa suction. Among the crop rotations, S–P rotation recorded significantly higher k(h) values than those under S–W and S–L rotations up to −40 kPa suction. The interaction effects of tillage and crop rotations affecting the k(h) values were found significant at all the soil water suctions. Both S–L and S–P rotations resulted in better soil water retention and transmission properties under ZT.     

Using the simplified falling head technique to detect temporal changes in field-saturated hydraulic conductivity at the surface of a sandy loam soil

Determining temporal changes in field-saturated hydraulic conductivity (K_fs) is important for understanding and modeling hydrological phenomena at the field scale. Little is known about temporal variability of K_fs values measured at permanent sampling points. In this investigation, the simplified falling head (SFH) technique was used for an approximately 2-year period to determine temporal changes in K_fs at 11 permanent sampling points established at the surface of a sandy loam soil. Additional K_fs measurements were obtained by the single-ring pressure infiltrometer (PI) technique to also compare the SFH and PI techniques. The lowest mean values of K_fs, M(K_fs), were detected in December and January (20.5 ≤ M(K_fs) ≤ 146.2 mm h⁻¹), whereas higher results (190.5 ≤ M(K_fs) ≤ 951.9 mm h⁻¹) were obtained in the other months of the year. The K_fs values were higher and less variable in the dry soil (θ_i ≤ 0.21 m³ m⁻³, M(K_fs) = 340.6 mm h⁻¹, CV(K_fs) = 106%) than in the wet one (θ_i > 0.21 m³ m⁻³, M(K_fs) = 78.4 mm h⁻¹, CV(K_fs) = 185%). Both wet and dry soil were less conductive at the end of the study period than at the beginning one but a more appreciable change was detected for the dry soil (K_fs decreasing by 83.4%) than for the wet one (K_fs decreasing by 63.0%). The simple SFH technique yielded K_fs results similar to the more laborious and time-consuming PI technique (i.e., mean values differing at the most by a factor of two). It was concluded that (i) the soil water content was an important factor affecting the K_fs results obtained in a relatively coarse-textured soil, (ii) the impact of time from the beginning of the experiment on the saturated hydraulic conductivity was larger for a repeated sampling of dry soil than of wet soil and (iii) the SFH technique yielded reliable K_fs results in a relatively short period of time without the need for extensive instrumentation or analytical methodology.     

Soil physical quality of a Brazilian Oxisol under two tillage systems using the least limiting water range approach

Plant growth is directly affected by soil water, soil aeration, and soil resistance to root penetration. The least limiting water range (LLWR) is defined as the range in soil water content within which limitations to plant growth associated with water potential, aeration and soil resistance to root penetration are minimal. The LLWR has not been evaluated in tropical soils. Thus, the objective of the present study was to evaluate the LLWR in a Brazilian clay Oxisol (Typic Hapludox) cropped with maize (Zea mays L. cv. Cargil 701) under no-tillage and conventional tillage. Ninety-six undisturbed soil samples were obtained from maize rows and between rows and used to determine the water retention curve, the soil resistance curve and bulk density. The results demonstrated that LLWR was higher in conventional tillage than in no-tillage and was negatively correlated with bulk density for values above 1.02 g cm⁻³. The range of LLWR variation was 0–0.1184 cm³ cm⁻³ in both systems, with mean values of 0.0785 cm³ cm⁻³ for no-tillage and 0.0964 cm³ cm⁻³ for conventional tillage. Soil resistance to root penetration determined the lower limit of LLWR in 89% of the samples in no-tillage and in 46% of the samples in conventional tillage. Additional evaluations of LLWR are needed under different texture and management conditions in tropical soils.     

Carbon dioxide emissions after application of tillage systems for a dark red latosol in southern Brazil

Soil tillage may influence CO₂ emissions in agricultural systems. Agricultural soils are managed in several ways in Brazil, ranging from no tillage to intensive land preparation. The objective of this study was to determine the effect of common soil tillage treatments (disk harrow, reversible disk plow, rotary tiller and chisel plow tillage systems) on the intermediate CO₂ emissions of a dark red latosol, located in southern Brazil. Different tillage systems produced significant differences in the CO₂ emissions, and the results indicate that the chisel plow produced the highest soil carbon loss during the 15 days period after tillage treatments were performed. Emissions to the atmosphere increased as much as 74 g CO₂ m⁻², at the end of a 2-week period, in the plot where the chisel plow treatment was applied, in comparison to the non-disturbed plot. The results indicate that the total increase on the intermediate term soil CO₂ emissions due to tillage treatments in southern Brazil is comparable to that reported for the more humid and cooler regions.     

Effects of tillage and nitrogen management on soil chemical and physical properties after 23 years of continuous sorghum

Long-term tillage and nitrogen (N) management practices can have a profound impact on soil properties and nutrient availability. A great deal of research evaluating tillage and N applications on soil chemical properties has been conducted with continuous corn (Zea Mays L.) throughout the Midwest, but not on continuous grain sorghum (Sorghum bicolor (L.) Moench). The objective of this experiment was to examine the long-term effects of tillage and nitrogen applications on soil physical and chemical properties at different depths after 23 years of continuous sorghum under no-till (NT) and conventional till (CT) (fall chisel-field cultivation prior to planting) systems. Ammonium nitrate (AN), urea, and a slow release form of urea were surface broadcast at rates of 34, 67, and 135 kg N ha⁻¹. Soil samples were taken to a depth of 15 cm and separated into 2.5 cm increments. As a result of lime applied to the soil surface, soil pH in the NT and CT plots decreased with depth, ranging from 6.9 to 5.7 in the NT plots and from 6.5 to 5.9 in the CT plots. Bray-1 extractable P and NH₄OAc extractable K was 20 and 49 mg kg⁻¹ higher, respectively, in the surface 2.5 cm of NT compared to CT. Extractable Ca was not greatly influenced by tillage but extractable Mg was higher for CT compared to NT below 2.5 cm. Organic carbon (OC) under NT was significantly higher in the surface 7.5 cm of soil compared to CT. Averaged across N rates, NT had 2.7 Mg ha⁻¹ more C than CT in the surface 7.5 cm of soil. Bulk density (Δ_b) of the CT was lower at 1.07 g cm⁻³ while Δ_b of NT plots was 1.13 g cm⁻³. This study demonstrated the effect tillage has on the distribution and concentration of certain chemical soil properties.     

Short-term changes in nitrogen availability, gas fluxes (CO2, NO, N2O) and microbial biomass after tillage during pasture re-establishment in Rondônia, Brazil

Anthropogenic conversion of primary forest to pasture for cattle production is still frequent in the Amazon Basin. Practices adopted by ranchers to restore productivity to degraded pasture have the potential to alter soil N availability and N gas losses from soils. We examined short-term (35 days) effects of tillage prior to pasture re-establishment on soil N availability, CO₂, NO and N₂O fluxes and microbial biomass C and N under degraded pasture at Nova Vida ranch, Rondônia, Brazilian Amazon. We collected soil samples and measured gas fluxes in tilled and control (non tilled pasture) 12 times at equally spaced intervals during October 2001 to quantify the effect of tillage. Maximum soil NH₄⁺ and NO₃⁻ pools were 13.2 and 6.3 kg N ha⁻¹ respectively after tillage compared to 0.24 and 6.3 kg N ha⁻¹ in the control. Carbon dioxide flux ranged from 118 to 181 mg C–CO₂ m² h⁻¹ in the control (non-tilled) and from 110 to 235 mg C–CO₂ m² h⁻¹ when tilled. Microbial biomass C varied from 365 to 461 μg g⁻¹ in the control and from 248 to 535 μg g⁻¹ when tilled. The values for N₂O fluxes ranged from 1.22 to 96.9 μg N m⁻² h⁻¹ in the tilled plots with a maximum 3 days after the second tilling. Variability in NO flux in the control and when tilled was consistent with previous measures of NO emissions from pasture at Nova Vida. When tilled, the NO/N₂O ratio remained <1 after the first tilling suggesting that denitrification dominated N cycling. The effects of tilling on microbial parameters were less clear, except for a decrease in qCO₂ and an increase in microbial biomass C/N immediately after tilling. Our results suggest that restoration of degraded pastures with tillage will lead to less C matter, at least initially. Further long-term research is needed.     

A short-term investigation of trace gas emissions following tillage and no-tillage of agroforestry residues in western Kenya

Improved-fallow agroforestry systems are increasingly being adopted in the humid tropics for soil fertility management. However, there is little information on trace gas emissions after residue application in these systems, or on the effect of tillage practice on emissions from tropical agricultural systems. Here, we report a short-term experiment in which the effects of tillage practice (no-tillage versus tillage to 15 cm depth) and residue quality on emissions of N₂O, CO₂ and CH₄ were determined in an improved-fallow agroforestry system in western Kenya. Emissions were increased following tillage of Tephrosia candida (2.1 g N₂O-N ha⁻¹ kg N applied⁻¹; 759 kg CO₂-C ha⁻¹ t C applied⁻¹; 30 g CH₄-C ha⁻¹ t C applied⁻¹) and Crotalaria paulina residues (2.8 g N₂O-N ha⁻¹ kg N applied⁻¹; 967 kg CO₂-C ha⁻¹ t C applied⁻¹; 146 g CH₄-C ha⁻¹ t C applied⁻¹) and were higher than from tillage of natural-fallow residues (1.0 g N₂O-N ha⁻¹ kg N applied⁻¹; 432 kg CO₂-C ha⁻¹ t C applied⁻¹; 14.7 g CH₄-C ha⁻¹ t C applied⁻¹) or from continuous maize cropping systems. Emissions from these fallow treatments were positively correlated with residue N content (r = 0.62–0.97; P < 0.05) and negatively correlated with residue lignin content (r = −0.56, N₂O; r = −0.92, CH₄; P < 0.05). No-tillage of surface applied Tephrosia residues lowered the total N₂O and CO₂ emitted over 99 days by 0.33 g N₂O-N ha⁻¹ kg N applied⁻¹ and 124 kg CO₂-C ha⁻¹ t C applied⁻¹, respectively; estimated to provide a reduction in global warming potential of 41 g CO₂ equivalents. However, emissions were increased from this treatment over the first 2 weeks. The responses to tillage practice and residue quality reported here need to be verified in longer term experiments before they can be used to suggest mitigation strategies appropriate for all three greenhouse gases.     

Tillage-induced CO2 loss across an eroded landscape

Soil carbon (C) losses and soil translocation from tillage operations have been identified as causes of soil degradation and soil erosion. The objective of this work was to quantify the variability in tillage-induced carbon dioxide (CO₂) loss by moldboard (MP) and chisel (CP) plowing across an eroded landscape and relate the C loss to soil properties. The study site was a 4 ha wheat (Triticum aestivum L. cv. Marshall) field with rolling topography and five soil types in the Svea-Barnes complex in west central Minnesota (N. Latitude = 45°41′W, Longitude = 95°43′). Soil properties were measured at several depths at a 10 m spacing along north–south (N–S) and west–east (W–E) transects through severely eroded, moderately eroded and non-eroded sites. Conventional MP (25 cm deep) and CP (15 cm deep) equipment were used along the pre-marked transects. Gas exchange measurements were obtained with a large, portable chamber within 2 m of each sample site following tillage. The measured CO₂ fluxes were largest with the MP > CP > not tilled (before tillage). The variation in 24 h cumulative CO₂ flux from MP was nearly 3-fold on the N–S transect and 4-fold on the W–E transect. The surface soil organic C on the transects was lowest on the eroded knolls at 5.1 g C kg⁻¹ and increased to 19.6 g C kg⁻¹ in the depositional areas. The lowest CO₂ fluxes were measured from severely eroded sites which indicated that the variation in CO₂ loss was partially reflected by the degradation of soil properties caused by historic tillage-induced soil translocation with some wind and water erosion.

The spatial variation across the rolling landscape complicates the determination of non-point sources of soil C loss and suggests the need for improved conservation tillage methods to maintain soil and air quality in agricultural production systems.     

Hydraulic conductivity, residue cover and soil surface roughness under different tillage systems in semiarid conditions

The objective of this study was to investigate the effect of tillage and cropping system on near-saturated hydraulic conductivity, residue cover and surface roughness to improve soil management for moisture conservation under semiarid Mediterranean conditions. Three tillage systems were compared (subsoil tillage, minimum tillage and no-tillage) under three field situations (continuous crop, fallow and crop after fallow) on two soils (Fluventic Xerochrept and Lithic Xeric Torriorthent). Soil under no-tillage had lower hydraulic conductivity (5.0 cm day⁻¹) than under subsoil tillage (15.5 cm day⁻¹) or minimum tillage (14.3 cm day⁻¹) during 1 of 2 years in continuous crop due to a reduction of soil porosity. Residue cover at sowing was greater under no-tillage (60%) than under subsoil or minimum tillage (<10%) in continuous crop. Under fallow, residue cover was low (10%) at sowing of the following crop for all tillage systems in both soils. Surface roughness increased with tillage, with a high value of 16% and decreasing following rainfall. Under no-tillage, surface roughness was relatively low (3–4%). Greater surface residue cover under no-tillage helped conserve water, despite indications of lower hydraulic conductivity. To overcome the condition of low infiltration and high evaporation when no-till fallow is expected in a cropping sequence, either greater residue production should be planed prior to fallow (e.g. no residue harvest) or surface tillage may be needed during fallow.     

Soil carbon dioxide fluxes following tillage in semiarid Mediterranean agroecosystems

In semiarid Mediterranean agroecosystems, low and erratic annual rainfall together with the widespread use of mouldboard ploughing (conventional tillage, CT), as the main traditional tillage practice, has led to a depletion of soil organic matter (SOM) and with increases in CO₂ emissions from soil to the atmosphere. In this study, we evaluated the viability of conservation tillage: RT, reduced tillage (chisel and cultivator ploughing) and, especially, NT (no-tillage) to reduce short-term (from 0 to 48 h after a tillage operation) and mid-term (from 0 h to several days since tillage operation) tillage-induced CO₂ emissions. The study was conducted in three long-term tillage experiments located at different sites of the Ebro river valley (NE Spain) across a precipitation gradient. Soils were classified as: Fluventic Xerocrept, Typic Xerofluvent and Xerollic Calciorthid. Soil temperature and water content were also measured in order to determine their influence on tillage-induced CO₂ fluxes. The majority of the CO₂ flux measured immediately after tillage ranged from 0.17 to 6 g CO₂ m⁻² h⁻¹ and was from 3 to 15 times greater than the flux before tillage operations, except in NT where soil CO₂ flux was low and steady during the whole study period. Mid-term CO₂ emission showed a different trend depending on the time of the year in which tillage was implemented. Microclimatic soil conditions (soil temperature and water content) had little impact on soil CO₂ emission following tillage. In the semiarid Mediterranean agroecosystems studied, NT had low short-term soil CO₂ efflux compared with other soil tillage systems (e.g., conventional and reduced tillage) and therefore can be recommended to better manage C in soil.     

Alternative tillage and crop residue management in wheat after rice in sandy loam soils of Indo-Gangetic plains

A 3-year field study was conducted to evaluate the effect of three tillage practices (conventional, zero and reduced/strip) with two nitrogen levels (120 and 150 kg N ha⁻¹) applied in primary strips and three crop residue management practices (removal, burning and incorporation) in secondary strips in wheat after rice. Reduced tillage resulted in significantly higher overall mean wheat yield (5.10 Mg ha⁻¹) compared to conventional (4.60 Mg ha⁻¹) and zero tillage (4.75 Mg ha⁻¹). Residue incorporation resulted in highest mean yield (5.86 Mg ha⁻¹) during third year. Maximum mean yield (6.1 Mg ha⁻¹) was obtained in reduced tillage followed by conventional tillage (5.8 Mg ha⁻¹) under residue incorporation in third year. The weed dry weight recorded at 30 days after sowing was highest (0.3 Mg ha⁻¹) under zero tillage and lowest under conventional tillage (0.16 Mg ha⁻¹). Among crop residue management practices, the highest dry weight of weeds (0.22 Mg ha⁻¹) was recorded under residue incorporation. The highest infiltration rate (1.50 cm h⁻¹) was recorded in residue incorporation followed by residue burning (1.44 cm h⁻¹) whereas; the lowest (0.75 cm h⁻¹) in zero tillage. Soil bulk density was the highest (1.69 Mg m⁻³) under zero tillage and the lowest in residue incorporation (1.59 Mg m⁻³). There were no changes in soil available P and K after each crop sequence in relation to tillage practices during first 2 years. Higher organic carbon (5.1–5.4 g kg⁻¹) was measured under zero tillage compared to other treatments. Residue incorporation increased soil organic carbon and available P while higher available K was monitored in burning treatment during the third year. These results suggest that reduced tillage and in situ incorporation of crop residues at 5 Mg ha⁻¹ along with 150 kg N ha⁻¹ were optimum to achieve higher yield of wheat after rice in sandy loam soils of Indo-Gangetic plains of India.     

Long-term tillage system effects under moist cool conditions in Switzerland

How do different soil tillage systems influence soil quality over the years? Under moist cool conditions is it possible in the long term to reduce dramatically soil tillage intensity without experiencing reductions in yield or other problems? In 1987, the Swiss Federal Research Station for Agricultural Economics and Engineering in Tänikon initiated a long-term soil tillage trial to clarify these questions. The trial compared mouldboard plough, chisel, paraplow, shallow tillage and no-tillage systems on a well-drained Orthic Luvisol with 160 g kg⁻¹ clay, 310 g kg⁻¹ silt, and under a climate that has a mean annual precipitation of 1180 mm. The tillage treatment effects were evaluated by measuring several biological, chemical, and physical soil quality indicators. Reduced soil tillage increased earthworm populations, reduced Pseudocercosporella herpotrichoides infection in wheat (Triticum aestivum) and increased plant colonisation by arbuscular mycorrhizal fungi. Yields for no-tillage and other ploughless cultivation techniques were on par with those obtained by ploughing. An exception was direct-drilled maize (Zea mays), where no-tillage decreased yield by more than 10% over the course of 14 years. In the first 7 years of the trial, the level of soil organic carbon in all the tillage regimes was approximately 40% lower than natural grassland (initial situation 1987=75 Mg SOC ha⁻¹). The no-tillage method did not differ from the others in respect of bulk density, but it showed an increased preconsolidation stress and hence better trafficability. Under Switzerland’s moist cool climatic conditions, it is possible to reduce soil tillage intensity without substantial reductions in yield, and at the same time improve soil quality.     

The effect of seeding and tillage methods on productivity of rice–wheat cropping system

Many farmers in southeast Asia are growing rice on unpuddled soil. This practice does not permit breaking of the deadlock of increase in productivity in spite of using high yielding varieties and practising all known scientific technologies. Furthermore, farmers do dry seeding which leads to heavy infestation of weeds and reduces response to other inputs. Similarly, in rice–wheat belt due to short turn around time farmers resort to broadcast sowing of wheat after rice and no data on benefits or otherwise of tillage are available. A field study was therefore conducted for 3 years (1993–1994 to 1995–1996) at the Indian Agricultural Research Institute, New Delhi to study the effect of tillage and seeding methods in rice–wheat cropping system. Treatments included four combinations of two puddling treatments (puddling and no puddling) and two methods of rice seeding (direct seeding and transplanting) in rice and two tillage treatments (zero and conventional tillage) in wheat. Results indicated that puddling increased grain yield of rice by 0.7–1 t ha⁻¹ and of succeeding wheat by 0.2–0.4 t ha⁻¹, straw yield of rice by 0.8–1.7 t ha⁻¹ and of succeeding wheat by 0.1–1.0 t ha⁻¹.

Puddling reduced water requirement of rice by 75 mm ha and increased net return of rice–wheat system by US $175 ha⁻¹. Transplanted rice gave significantly higher grain and straw yields and net returns than direct seeded rice both on puddled and unpuddled seedbed. Conventional tillage in wheat also increased productivity of rice–wheat cropping system significantly over zero tillage after both puddled and non-puddled rice. Our results thus show that rice should be grown on puddled soil and wheat after rice should be sown after conventional tillage.     

Depth distribution of soil organic C and N after long-term soybean cropping in Texas

Crop management practices have potential to enhance subsoil C and N sequestration in the southern U.S., but effects may vary with tillage regime and cropping sequence. The objective of this study was to determine the impacts of tillage and soybean cropping sequence on the depth distribution of soil organic C (SOC), dissolved organic C (DOC), and total N after 20 years of treatment imposition for a silty clay loam soil in central Texas. A continuous soybean monoculture, a wheat–soybean doublecrop, and a sorghum–wheat–soybean rotation were established under both conventional (CT) and no tillage (NT). Soil was sampled after soybean harvest and sectioned into 0–5, 5–15, 15–30, 30–55, 55–80, and 80–105 cm depth intervals. Both tillage and cropping intensity influenced C and N dynamics in surface and subsurface soils. No tillage increased SOC, DOC, and total N compared to CT to a 30 cm depth for continuous soybean, but to 55 cm depths for the more intensive sorghum–wheat–soybean rotation and wheat–soybean doublecrop. Averaged from 0 to 105 cm, NT increased SOC, DOC, and total N by 32, 22, and 34%, respectively, compared to CT. Intensive cropping increased SOC and total N at depths to 55 cm compared to continuous soybean, regardless of tillage regime. Continuous soybean had significantly lower SOC (5.3 g kg⁻¹) than sorghum–wheat–soybean (6.4 g kg⁻¹) and wheat–soybean (6.1 g kg⁻¹), and 19% lower total N than other cropping sequences. Dissolved organic C was also significantly higher for sorghum–wheat–soybean (139 mg C kg⁻¹) than wheat–soybean (92 mg C kg⁻¹) and continuous soybean (100 mg C kg⁻¹). The depth distribution of SOC, DOC, and total N indicated treatment effects below the maximum tillage depth (25 cm), suggesting that roots, or translocation of dissolved organic matter from surface soils, contributed to higher soil organic matter levels under NT than CT in subsurface soils. High-intensity cropping sequences, coupled with NT, resulted in the highest soil organic matter levels, demonstrating potential for C and N sequestration for subsurface soils in the southern U.S.