Estimation of the Deoxynivalenol and Moisture Contents of Bulk Wheat Grain Samples by FT‐NIR Spectroscopy

Deoxynivalenol (DON) levels in harvested grain samples are used to evaluate the Fusarium head blight (FHB) resistance of wheat cultivars and breeding lines. Fourier transform near‐infrared (FT‐NIR) calibrations were developed to estimate the DON level and moisture content (MC) of bulk wheat grain samples harvested from FHB screening trials. Grains in a rotating glass petri dish were scanned in the 10,000–4,000 cm⁻¹ (1,000–2,500 nm) spectral range using a Perkin Elmer Spectrum 400 FT‐IR/FT‐NIR spectrometer. The DON calibration predicted the DON levels in test samples with R ² = 0.62 and root mean square error of prediction (RMSEP) = 8.01 ppm. When 5–25 ppm of DON was used as the cut‐off to classify samples into low‐ and high‐DON groups, 60.8–82.3% of the low‐DON samples were correctly classified, whereas the classification accuracy of the high‐DON group was 82.3–94.0%. The MC calibration predicted the MC in grain samples with R ² = 0.98 and RMSEP = 0.19%. Therefore, these FT‐NIR calibrations can be used to rapidly prescreen wheat lines to identify low‐DON lines for further evaluation using standard laboratory methods, thereby reducing the time and costs of analyzing samples from FHB screening trials.     

Single‐Kernel Near‐Infrared Analysis for Evaluating Wheat Samples for Fusarium Head Blight Resistance

This report describes a method to estimate the bulk deoxynivalenol (DON) content of wheat grain samples with the single‐kernel DON levels estimated by a single‐kernel near‐infrared (SKNIR) system combined with single‐kernel weights. The described method estimated the bulk DON levels in 90% of 160 grain samples to within 6.7 ppm of DON when compared with the DON content determined with the gas chromatography–mass spectrometry method. The single‐kernel DON analysis showed that the DON content among DON‐containing kernels (DCKs) varied considerably. The analysis of the distribution of DON levels among all kernels and among the DCKs of grain samples is helpful for the in‐depth evaluation of the effect of varieties or fungicides on Fusarium head blight (FHB) reactions. The SKNIR DON analysis and estimation of the single‐kernel DON distribution patterns demonstrated in this study may be helpful for wheat breeders to evaluate the FHB resistance of varieties in relation to their resistance to the spread of the disease and resistance to DON accumulation.     

Determining Weight and Moisture Properties of Sound and Fusarium‐Damaged Single Wheat Kernels by Near‐Infrared Spectroscopy

Single kernel moisture content (MC) is important in the measurement of other quality traits in single kernels because many traits are expressed on a dry weight basis. MC also affects viability, storage quality, and price. Also, if near‐infrared (NIR) spectroscopy is used to measure grain traits, the influence of water must be accounted for because water is a strong absorber throughout the NIR region. The feasibility of measurement of MC, fresh weight, dry weight, and water mass of single wheat kernels with or without Fusarium damage was investigated using two wheat cultivars with three visually selected classes of kernels with Fusarium damage and a range of MC. Calibration models were developed either from all kernel classes or from only undamaged kernels of one cultivar that were then validated using all spectra of the other cultivar. A calibration model developed for MC when using all kernels from the wheat cultivar Jagalene had a coefficient of determination (R²) of 0.77 and standard error of cross validation (SECV) of 1.03%. This model predicted the MC of the wheat cultivar 2137 with R² of 0.81 and a standard error of prediction (SEP) of 1.02% and RPD of 2.2. Calibration models developed using all kernels from both cultivars predicted MC, fresh weight, dry weight, or water mass in kernels better than models that used only undamaged kernels from both cultivars. Single kernel water mass was more accurately estimated using the actual fresh weight of kernels and MC predicted by calibrations that used all kernels or undamaged kernels. The necessity for evaluating and expressing constituent levels in single kernels on a mass/kernel basis rather than a percentage basis was elaborated. The need to overcome the effects of kernel size and water mass on single kernel spectra before using in calibration model development was also highlighted.     

Near‐Infrared Spectroscopic Evaluation of Single‐Kernel Deoxynivalenol Accumulation and Fusarium Head Blight Resistance Components in Wheat

Fusarium head blight (FHB) symptoms, single‐kernel deoxynivalenol (DON) levels, and distribution of DON levels among kernels in response to artificial FHB inoculation were investigated in three selected wheat cultivars that had different reported levels of FHB resistance. DON levels were estimated with near‐infrared spectroscopy. The percentages of DON‐containing spikelets per spike of 15.2, 49.7, and 89.1% were significantly different among point‐inoculated spikes of Everest, Karl 92, and Overley, respectively. The percentage of visually Fusarium‐damaged kernels in point‐inoculated Karl 92 and Overley spikes was significantly higher than for Everest. However, the DON‐containing spikelets per spike and visually Fusarium‐damaged kernels values for spray‐inoculated spikes were not significantly different among the three cultivars. In spray‐inoculated spikes, DON levels in kernels ranged from 0 to 291.3 ppm, whereas the variation of DON levels in spikelet positions was random. In contrast, DON levels in spikelets below the inoculated spikelet in point‐inoculated spikes showed marked differences among the three cultivars. Overley had the highest DON accumulation in kernels. This near‐infrared spectroscopy method may be used as a novel way to evaluate wheat cultivars for FHB resistance to toxin accumulation. Other resistance components such as resistance to pathogen infection and resistance to pathogen spread may also be evaluated.     

Near‐Infrared Spectroscopic Method for Identification of Fusarium Head Blight Damage and Prediction of Deoxynivalenol in Single Wheat Kernels

Fusarium Head Blight (FHB), or scab, can result in significant crop yield losses and contaminated grain in wheat (Triticum aestivum L.). Growing less susceptible cultivars is one of the most effective methods for managing FHB and for reducing deoxynivalenol (DON) levels in grain, but breeding programs lack a rapid and objective method for identifying the fungi and toxins. It is important to estimate proportions of sound kernels and Fusarium‐damaged kernels (FDK) in grain and to estimate DON levels of FDK to objectively assess the resistance of a cultivar. An automated single kernel near‐infrared (SKNIR) spectroscopic method for identification of FDK and for estimating DON levels was evaluated. The SKNIR system classified visually sound and FDK with an accuracy of 98.8 and 99.9%, respectively. The sound fraction had no or very little accumulation of DON. The FDK fraction was sorted into fractions with high or low DON content. The kernels identified as FDK by the SKNIR system had better correlation with other FHB assessment indices such as FHB severity, FHB incidence and kernels/g than visual FDK%. This technique can be successfully employed to nondestructively sort kernels with Fusarium damage and to estimate DON levels of those kernels. Single kernels could be predicted as having low (<60 ppm) or high (>60 ppm) DON with ≈96% accuracy. Single kernel DON levels of the high DON kernels could be estimated with R² = 0.87 and standard error of prediction (SEP) of 60.8 ppm. Because the method is nondestructive, seeds may be saved for generation advancement. The automated method is rapid (1 kernel/sec) and sorting grains into several fractions depending on DON levels will provide breeders with more information than techniques that deliver average DON levels from bulk seed samples.     

Near‐Infrared Hyperspectral Imaging of Fusarium‐Damaged Oats (Avena sativa L.)

The feasibility of hyperspectral imaging (HSI) to detect deoxynivalenol (DON) content and Fusarium damage in single oat kernels was investigated. Hyperspectral images of oat kernels from a Fusarium‐inoculated nursery were used after visual classification as asymptomatic, mildly damaged, and severely damaged. Uninoculated kernels were included as controls. The average spectrum from each kernel was paired with the reference DON value for the same kernel, and a calibration model was fitted by partial least squares regression (PLSR). To correct for the skewed distribution of DON values and avoid nonlinearities in the model, the DON values were transformed as DON* = [log(DON)]³. The model was optimized by cross‐validation, and its prediction performance was validated by predicting DON* values for a separate set of validation kernels. The PLSR model and linear discriminant analysis classification were further used on single‐pixel spectra to investigate the spatial distribution of infection in the kernels. There were clear differences between the kernel classes. The first component separated the uninoculated and asymptomatic from the severely damaged kernels. Infected kernels showed higher intensities at 1,925, 2,070, and 2,140 nm, whereas noninfected kernels were dominated by signals at 1,400, 1,626, and 1,850 nm. The DON* values of the validation kernels were estimated by using their average spectra, and the correlation (R) between predicted and measured DON* was 0.8. Our results show that HSI has great potential in detecting Fusarium damage and predicting DON in oats, but it needs more work to develop a model for routine application.     

Detection of Scab‐Damaged Hard Red Spring Wheat Kernels by Near‐Infrared Reflectance

Scab (Fusarium head blight) is a fungal disease that has become increasingly prevalent in North American wheat during the past 15 years. It is of concern to growers, processors, and the consumers because of depressed yields, poor flour quality, and the potential for elevated concentrations of the mycotoxin, deoxynivalenol (DON). Both wheat breeder and wheat inspector must currently deal with the assessment of scab in harvested wheat by manual human inspection. The study described herein examined the accuracy of a semi‐automated wheat scab inspection system that is based on near‐infrared (NIR) reflectance (1,000–1,700 nm) of individual kernels. Using statistical classification techniques such as linear discriminant analysis and nonparametric (k‐nearest‐neighbor) classification, upper limits of accuracy for NIR‐based classification schemes of ≈88% (cross‐validation) and 97% (test) were determined. An exhaustive search of the most suitable wavelength pairs for the spectral difference, [log(1/R)_λ1 ‐ log(1/R)_λ2], revealed that the slope of the low‐wavelength side of a broad carbohydrate absorption band (centered at ≈1,200 nm) was very effective at discriminating between healthy and scab‐damaged kernels with test set accuracies of 95%. The achieved accuracy levels demonstrate the potential for the use of NIR spectroscopy in commercial sorting and inspection operations for wheat scab.     

Hardness Measurement of Bulk Wheat by Single‐Kernel Visible and Near‐Infrared Reflectance Spectroscopy

Reflectance spectra (400 to 1700 nm) of single wheat kernels collected using the Single Kernel Characterization System (SKCS) 4170 were analyzed for wheat grain hardness using partial least squares (PLS) regression. The wavelengths (650 to 700, 1100, 1200, 1380, 1450, and 1670 nm) that contributed most to the ability of the model to predict hardness were related to protein, starch, and color differences. Slightly better prediction results were observed when the 550–1690 nm region was used compared with 950–1690 nm region across all sample sizes. For the 30‐kernel mass‐averaged model, the hardness prediction for 550–1690 nm spectra resulted in a coefficient of determination (R²) = 0.91, standard error of cross validation (SECV) = 7.70, and relative predictive determinant (RPD) = 3.3, while the 950–1690 nm had R² = 0.88, SECV = 8.67, and RPD = 2.9. Average hardness of hard and soft wheat validation samples based on mass‐averaged spectra of 30 kernels was predicted and compared with the SKCS 4100 reference method (R² = 0.88). Compared with the reference SKCS hardness classification, the 30‐kernel (550–1690 nm) prediction model correctly differentiated (97%) between hard and soft wheat. Monte Carlo simulation technique coupled with the SKCS 4100 hardness classification logic was used for classifying mixed wheat samples. Compared with the reference, the prediction model correctly classified mixed samples with 72–100% accuracy. Results confirmed the potential of using visible and near‐infrared reflectance spectroscopy of whole single kernels of wheat as a rapid and nondestructive measurement of bulk wheat grain hardness.     

Assessment of Heat-Damaged Wheat Kernels Using Near-Infrared Spectroscopy

Heat damage is a serious problem frequently associated with wet harvests because of improper storage of damp grain or artificial drying of moist grain at high temperatures. Heat damage causes protein denaturation and reduces processing quality. The current visual method for assessing heat damage is subjective and based on color change. Denatured protein related to heat damage does not always cause a color change in kernels. The objective of this research was to evaluate the use of nearinfrared (NIR) reflectance spectroscopy to identify heat-damaged wheat kernels. A diode-array NIR spectrometer, which measured reflectance spectra (log (1/R)) from 400 to 1,700 nm, was used to differentiate single kernels of heat-damaged and undamaged wheats. Results showed that light scattering was the major contributor to the spectral characteristics of heat-damaged kernels. For partial least squares (PLS) models, the NIR wavelength region of 750–1,700 nm provided the highest classification accuracy (100%) for both cross-validation of the calibration sample set and prediction of the test sample set. The visible wavelength region (400–750 nm) gave the lowest classification accuracy. For two-wavelength models, the average of correct classification for the classification sample set was >97%. The average of correct classification for the test sample set was generally >96% using two-wavelength models. Although the classification accuracies of two-wavelength models were lower than those of the PLS models, they may meet the requirements for industry and grain inspection applications.     

Determining Vitreous Subclasses of Hard Red Spring Wheat Using Visible/Near‐Infrared Spectroscopy

The percentage of dark hard vitreous (DHV) kernels in hard red spring wheat is an important grading factor that is associated with protein content, kernel hardness, milling properties, and baking quality. The current visual method of determining DHV and non‐DHV (NDHV) wheat kernels is time‐consuming, tedious, and subject to large errors. The objective of this research was to classify DHV and NDHV wheat kernels, including kernels that were checked, cracked, sprouted, or bleached using visible/near‐infrared (Vis/NIR) spectroscopy. Spectra from single DHV and NDHV kernels were collected using a diode‐array NIR spectrometer. The dorsal and crease sides of the kernels were viewed. Three wavelength regions, 500–750 nm, 750–1,700 nm, and 500–1700 nm were compared. Spectra were analyzed by using partial least squares (PLS) regression. Results suggest that the major contributors to classifying DHV and NDHV kernels are light scattering, protein content, kernel hardness, starch content, and kernel color effects on the absorption spectrum. Bleached kernels were the most difficult to classify because of high lightness values. The sample set with bleached kernels yielded lower classification accuracies of 91.1–97.1% compared with 97.5–100% for the sample set without bleached kernels. More than 75% of misclassified kernels were bleached. For sample sets without bleached kernels, the classification models that included the dorsal side gave the highest classification accuracies (99.6–100%) for the testing sample set. Wavelengths in both the Vis/NIR regions or the NIR region alone yielded better classification accuracies than those in the visible region only.     

Estimating Deoxynivalenol Content of Ground Oats Using VIS‐NIR Spectroscopy

The potential of VIS‐NIR spectroscopy as a rapid screening method for resistance of Fusarium‐inoculated oats to replace the costly chemical measurements of deoxynivalenol (DON) was investigated. Partial least squares (PLS) regression was conducted on second‐derivative spectra (400–2,350 nm) of 166 DON‐contaminated samples (0.05–28.1 ppm, mean = 13.06 ppm) with separate calibration and test set samples. The calibration set had 111 samples, and the test set had 55 samples. The best model developed had three PLS components and a root mean square error of prediction (RMSEP) of 3.16 ppm. The residual predictive deviation (RPD) value of the prediction model was 2.63, an acceptable value for the purpose of rough screening. Visual inspection and the VIS spectra of the samples revealed that high‐DON samples tended to be darker in color and coarser in texture compared with low‐DON samples. The second‐derivative spectra showed that low‐DON samples tended to have more water and fat content than high‐DON samples. With an RMSEP value of 3.16 and RPD of value of 2.63, it seems possible to use VIS‐NIR spectroscopy to semiquantitatively estimate DON content of oats and discard the worst genotypes during the early stages of screening.     

Selecting and Sorting Waxy Wheat Kernels Using Near‐Infrared Spectroscopy

An automated single kernel near‐infrared (NIR) sorting system was used to separate single wheat (Triticum aestivum L.) kernels with amylose‐free (waxy) starch from reduced‐amylose (partial waxy) or wild‐type wheat kernels. Waxy kernels of hexaploid wheat are null for the granule‐bound starch synthase alleles at all three Wx gene loci; partial waxy kernels have at least one null and one functional allele. Wild‐type kernels have three functional alleles. Our results demonstrate that automated single kernel NIR technology can be used to select waxy kernels from segregating breeding lines or to purify advanced breeding lines for the low‐amylose kernel trait. Calibrations based on either amylose content or the waxy trait performed similarly. Also, a calibration developed using the amylose content of waxy, partial waxy, and wild‐type durum (T. turgidum L. var durum) wheat enabled adequate sorting for hard red winter and hard red spring wheat with no modifications. Regression coefficients indicated that absorption by starch in the NIR region contributed to the classification models. Single kernel NIR technology offers significant benefits to breeding programs that are developing wheat with amylose‐free starches.     

Predicting Scab,Vomitoxin, and Ergosterol in Single Wheat Kernels Using Near-Infrared Spectroscopy

Near-infrared spectroscopy (NIRS) was used to detect scab damage and estimate deoxynivalenol (DON) and ergosterol levels in single wheat kernels. Results showed that all scab-damaged kernels identified by official inspectors were correctly identified by NIRS. In addition, this system identified more kernels with DON than did a visual inspection. DON and ergosterol were predicted with standard errors of ≈40 and 100 ppm, respectively. All samples with visible scab had single kernels with DON levels >120 ppm, and some kernels contained >700 ppm of DON. This technology may provide a means of rapidly screening samples for potential food safety and quality problems related to scab damage.     

Detection of Sprouted and Midge‐Damaged Wheat Kernels Using Near‐Infrared Hyperspectral Imaging

Sprout damage which results in poor breadmaking quality due to enzymatic activity of α‐amylase is one of the important grading factors of wheat in Canada. Potential of near‐infrared (NIR) hyperspectral imaging was investigated to detect sprouting of wheat kernels. Artificially sprouted, midge‐damaged, and healthy wheat kernels were scanned using NIR hyperspectral imaging system in the range of 1000–1600 nm at 60 evenly distributed wavelengths. Multivariate image analysis (MVI) technique based on principal components analysis (PCA) was applied to reduce the dimensionality of the hyperspectral data. Three wavelengths 1101.7, 1132.2, and 1305.1 nm were identified as significant and used in analysis. Statistical discriminant classifiers (linear, quadratic, and Mahalanobis) were used to classify sprouted, midge‐damaged, and healthy wheat kernels. The discriminant classifiers gave maximum accuracy of 98.3 and 100% for classifying healthy and damaged kernels, respectively.     

Environmental Effects on Developing Wheat as Sensed by Near‐Infrared Reflectance of Mature Grains

For 30 years, near‐infrared (NIR) spectroscopy has routinely been applied to the cereal grains for the purpose of rapidly measuring concentrations of constituents such as protein and moisture. The research described herein examined the ability of NIR reflectance spectroscopy on harvested wheat to determine weather‐related, quality‐determining properties that occurred during plant development. Twenty commercial cultivars or advanced breeding lines of hard red winter and hard white wheat (Triticum aestivum L.) were grown in 10 geographical locations under prevailing natural conditions of the U.S. Great Plains. Diffuse reflectance spectra (1,100–2,498 nm) of ground wheat from these samples were modeled by partial least squares one (PLS1) and multiple linear regression algorithms for the following properties: SDS sedimentation volume, amount of time during grain fill in which the temperature or relative humidity exceeded or was less than a threshold level (i.e., >30, >32, >35, <24°C; >80%, <40% rh). Rainfall values associated with four pre‐ and post‐planting stages also were examined heuristically by PLS2 analysis. Partial correlation analysis was used to statistically remove the contribution of protein content from the quantitative NIR models. PLS1 models of 9–11 factors on scatter‐corrected and (second order) derivatized spectra produced models whose dimensionless error (RPD, ratio of standard deviation of the property in a test set to the model standard error for that property) ranged from 2.0 to 3.3. Multiple linear regression models, involving the sum of four second‐derivative terms with coefficients, produced models of slightly higher error compared with PLS models. For both modeling approaches, partial correlation analysis demonstrated that model success extends beyond an intercorrelation between property and protein content, a constituent that is well‐modeled by NIR spectroscopy. With refinement, these types of NIR models may have the potential to provide grain handlers, millers, and bakers a tool for identifying the cultural environment under which the purchased grain was produced.     

Automated Color Classification of Single Wheat Kernels Using Visible and Near-Infrared Reflectance

Modification of an existing single kernel wheat characterization system allowed collection of visible and near-infrared (NIR) reflectance spectra (450–1,688 nm) at a rate of 1 kernel/4 sec. The spectral information was used to classify red and white wheats in an attempt to remove subjectivity from class determinations. Calibration, validation, and prediction results showed that calibrations using partial least squares regression and derived from the full wavelength profile correctly classed more kernels than either the visible region (450–700 nm) or the NIR region (700–1,688 nm). Most results showed >99% correct classification for single kernels when using the visible and NIR regions. Averaging of single kernel classifications resulted in 100% correct classification of bulk samples.     

Predicting Wheat Quality Characteristics and Functionality Using Near‐Infrared Spectroscopy

The accuracy of using near‐infrared spectroscopy (NIRS) for predicting 186 grain, milling, flour, dough, and breadmaking quality parameters of 100 hard red winter (HRW) and 98 hard red spring (HRS) wheat and flour samples was evaluated. NIRS shows the potential for predicting protein content, moisture content, and flour color b* values with accuracies suitable for process control (R² > 0.97). Many other parameters were predicted with accuracies suitable for rough screening including test weight, average single kernel diameter and moisture content, SDS sedimentation volume, color a* values, total gluten content, mixograph, farinograph, and alveograph parameters, loaf volume, specific loaf volume, baking water absorption and mix time, gliadin and glutenin content, flour particle size, and the percentage of dark hard and vitreous kernels. Similar results were seen when analyzing data from either HRW or HRS wheat, and when predicting quality using spectra from either grain or flour. However, many attributes were correlated to protein content and this relationship influenced classification accuracies. When the influence of protein content was removed from the analyses, the only factors that could be predicted by NIRS with R² > 0.70 were moisture content, test weight, flour color, free lipids, flour particle size, and the percentage of dark hard and vitreous kernels. Thus, NIRS can be used to predict many grain quality and functionality traits, but mainly because of the high correlations of these traits to protein content.     

Differentiating Vitreous and Nonvitreous Durum Wheat Kernels by Using Near‐Infrared Spectroscopy

The vitreousnss of durum wheat is used by the wheat industry as an indicator of milling and cooking quality. The current visual method of determining vitreousness is subjective, and classification results between inspectors and countries vary widely. Thus, the use of near‐infrared (NIR) spectroscopy to objectively classify vitreous and nonvitreous single kernels was investigated. Results showed that classification of obviously vitreous or nonvitreous kernels by the NIR procedure agreed almost perfectly with inspector classifications. However, when difficult‐to‐classify vitreous and nonvitreous kernels were included in the analysis, the NIR procedure agreed with inspectors on only 75% of kernels. While the classification of difficult kernels by NIR spectroscopy did not match well with inspector classifications, this NIR procedure quantifies vitreousness and thus may provide an objective classification means that could reduce inspector‐to‐inspector variability. Classifications appear to be due, at least in part, to scattering effects and to starch and protein differences between vitreous and nonvitreous kernels.     

Deoxynivalenol Content of Cereal Grain from Naturally Infected and Artificially Inoculated Plants in Field Trials in Norway

The Fusarium mycotoxins deoxynivalenol (DON) and 3-acetyl-deoxynivalenol (3-acDON) were determined in grain samples from naturally infected and Fusarium culmorum inoculated plants in field experiments in Norway during 1992–1996. The mean DON content in trials with inoculated plants was 11.8 μg/g in spring oats, 11.3μg/g in winter wheat, 28.9 μg/g in spring wheat and 31.4 μg/g in spring barley. In the natural infection trials the mean DON content was 0.32 μg/g in spring oats, 0.22μg/g in winter wheat, 1.48μg/g in spring wheat and 0.54 μg/g in spring barley. Only small differences in DON content were observed among cultivars, and significant differences were found only in winter wheat in the inoculation trials, and in spring wheat in the natural infection trials. A significant correlation was observed between the 3-acDON and DON contents in the inoculated trials in all grain species, the mean ratio of 3-acDON to DON ranging from 0.011 in wheat to 0.071 in oats.     

Application of the Single‐Kernel Characterization System to Durum Wheat Testing and Quality Prediction

The Single Kernel Characterization System (SKCS 4100) measures single kernel weight, width, moisture content, and hardness in wheat grain with greater speed than existing methods and can be calibrated to predict flour starch damage and milling yield. The SKCS 4100 is potentially useful for testing applications in a durum improvement program. The mean SKCS 4100 kernel weight and moisture values from the analysis of 300 individual kernels gave good correlations with 1,000 kernel weight (r² = 0.956) and oven moisture (r² = 0.987), respectively. Although significant correlations were obtained between semolina mill yield and SKCS 4100 weight, diameter, and peak force, they were all very low and would be of little use for prediction purposes. Similarly, although there were significant correlations between some SKCS 4100 parameters and test weight and farinograph parameters, they too were small. The SKCS 4100 has been calibrated using either the single kernel hardness index or crush force profile to objectively measure the percentage vitreous grains in a sample with reasonable accuracy, and it correlates well with visual determination. The speed and accuracy of the test would be of interest to grain traders. An imprecise but potentially useful calibration was obtained for the prediction of semolina mill yield using the SKCS 4100 measurements on durum wheat. The SKCS 4100 is useful for some traits such as hardness, grain size and moisture for early‐generation (F3) selection in a durum improvement program.