Predicting Buckwheat Flavonoids Bioavailability in Different Food Matrices Under In Vitro Simulated Human Digestion

The digestibility and bioaccessibility of major flavonoids (rutin, quercetin, and isoquercitrin) in various buckwheat food matrices were evaluated as a function of the rutin levels using an in vitro simulated digestion model. Food matrices were unprocessed samples (buckwheat flour [BF], flavonoid extract [FE], rutin‐enhanced flavonoid extract [REFE], and pure rutin) and processed samples (cakes with BF, FE, and REFE and a rutin‐spiked cake). FE showed the highest digestibility out of all the unprocessed samples (FE > REFE > BF > rutin), whereas BF exhibited the highest bioaccessibility (BF > FE > REFE = rutin). Moreover, the processed samples improved their flavonoid bioaccessibility upon baking. Thus, unprocessed FE is a good source for highly bioavailable flavonoids; moreover, baking exerts a positive effect on flavonoid digestibility and bioaccessibility. Because flavonoids can be further fermented by microorganisms in the large intestine into various metabolites, determining the digestibility and bioaccessibility of various flavonoids is useful for predicting flavonoid bioavailability in buckwheat and buckwheat‐based food products.     

Effects of Protein Content,Glutenin‐to‐Gliadin Ratio,Amylose Content,and Starch Damage on Textural Properties of Chinese Fresh White Noodles

The independent effects of flour protein and starch on textural properties of Chinese fresh white noodles were investigated through reconstitution of fractionated flour components. Noodle hardness decreased with decreased protein content, whereas it unexpectedly increased as protein content decreased to a very low level (7.0%). Noodle cohesiveness, tensile strength, and breaking length increased with increased protein content. Higher glutenin‐to‐gliadin ratio resulted in harder and stronger noodles at constant protein content. Increased starch amylose content resulted in increased flour peak viscosity. When water absorption remained the same during noodle making, hardness and cohesiveness of cooked noodles also increased with increased starch amylose content, while springiness did not vary significantly. Increased starch damage of ≈5.5–10.4% effectively improved noodle hardness; however, starch damage >10.4% decreased it. Increased starch damage also enhanced noodle springiness while it decreased cohesiveness.     

Composite Durum Wheat Flour/Plantain Starch White Salted Noodles: Proximal Composition,Starch Digestibility,and Indigestible Fraction Content

In search of a way to improve the nutritional profile of noodles, we prepared them with various mixtures of durum wheat flour and isolated plantain starch, and tested their proximal composition. Cooked noodles were assessed for in vitro starch digestibility, indigestible fraction content, and predicted glycemic index. The protein content declined with the addition of plantain starch. Both total starch (TS) level and the content of starch available for digestible enzymes (AS) decreased as the plantain starch level increased, a pattern that may be related to increased starch lixiviation during cooking of noodles containing plantain starch. There was an inverse pattern for resistant starch (RS). RS content in control (durum wheat flour) noodles was ≈50% lower than in the samples containing plantain starch. The soluble indigestible fraction (SIF) content in all samples was higher than the insoluble counterpart (IIF). The total indigestible fraction varied according to the wheat substitution level. Although the hydrolysis index (HI) and predicted glycemic index (pGI) of plantain starch noodles were moderate and decreased as the plantain starch proportion rose. These composite noodles exhibited higher indices than the control sample, a phenomenon that may also be dependent on the product physical structure. Results indicate that in spite of the increased starch digestion rate, plantain starch noodles are a better source of indigestible carbohydrates than pure wheat starch pasta. This might have dietetic applications.     

Physicochemical Properties of Pueraria Root Starches and Their Effect on the Improvement of Buckwheat Noodle Quality

The physicochemical properties of starches from cultivated Pueraria thomsonii Benth were examined and compared with those of P. lobata (Willd.) Ohwi and other root starches, and the effect of pueraria root starches on the improvement of buckwheat noodle quality was investigated. The total content of isoflavones in P. thomsonii root starches was higher than in P. lobata root starches, and the size and uniformity of those particles displayed a significant difference. The gel stabilities of pueraria root starches were similar and more favorable than those of potato starch and sweet potato starch. For the amylose molecular properties of pueraria root starches, the λ_max and blue value index were higher than those of the potato starch and the sweet potato starch, whereas the amylose content and degree of polymerization were much lower in comparison. However, amylopectin branch lengths of pueraria root starches were shorter. Thus, pueraria root starches could improve the quality of buckwheat noodles and enhance their nutritional function. Therefore, pueraria root starches may be regarded as raw materials that influence the quality of buckwheat noodles.     

Effect of Whole Grain Wheat Flour on the Mixing Properties,Oil Uptake,and In Vitro Starch Digestibility of Instant Fried Noodles

The effects of whole grain wheat (WGW) flour on the quality attributes of instant fried noodles were characterized in terms of mixing and oil‐resisting properties as well as in vitro starch digestibility. Higher water absorption and shorter kneading time were required to obtain the optimally mixed dough from WGW flour, and the presence of nonstarch components in the WGW flour lowered the thermal conductivity of the noodles. The use of WGW flour produced instant fried noodles with oil uptake reduced by 30%, which could be correlated with the less porous structure confirmed by the surface and cross‐sectional scanning electron microscope images. When the instant fried noodles were subjected to in vitro starch digestion, the use of WGW flour was effective in suppressing the hydrolysis of starch in the noodles, and the predicted glycemic index of the WGW noodles (80.6) was significantly lower than that of the white wheat noodles (83.3).     

In Vitro Starch Digestibility of Tortillas Elaborated by Different Masa Preparation Procedures

Starch digestibility was evaluated in freshly prepared tortillas elaborated from masa obtained from different procedures (laboratory‐made masa, commercial masa, and nixtamalized corn flour) and from laboratory‐made masa with added commercial hydrocolloid, and stored for 24, 48, and 74 hr. Tortillas prepared with commercial masa had the highest available starch (AS) content and the commercial tortillas had the lowest, showing a decrease in AS content when storage time increased. Tortilla of commercial masa showed the lowest resistant starch (RS) content that agrees with the AS measured. However, tortilla of laboratory‐made masa presented the highest AS and RS contents. RS increased with storage time, a pattern that is related to the starch retrogradation phenomenon observed when retrograded resistant starch (RRS) was quantified. Commercial tortillas showed predicted glycemic index (pGI) values of 62–75% using a chewing/dialysis procedure (semi in vitro method). Index values were lower than those determined in vitro. The pGI of tortillas decreased, and the values were different depending on the method used to prepare the masa and tortilla. Commercial tortilla and tortilla of NCF had the lowest pGI. Therefore, the procedure to obtain masa and thereafter obtain tortillas influenced the starch digestibility of the product.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Effects of Particle Size and Starch Damage of Flour and Alkaline Reagent on Yellow Alkaline Noodle Characteristics

A hard white spring wheat was milled to yield three patent flours with different starch damage levels by manipulating reduction grinding conditions, and each flour was sieved to give three different particle sizes (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Noodles prepared with sodium hydroxide were significantly brighter, less red, and more yellow than those made with kansui. Differences in noodle color among flour treatments were evident but were attributable to differences in flour refinement rather to than particle size or starch damage. Noodles were rested for 1 hr after processing before cooking. Alkaline reagent was the main factor associated with cooking loss, being ≈50% greater for sodium hydroxide noodles because of higher pH compared with kansui noodles. Cooked sodium hydroxide noodles were thicker than kansui noodles, and cooked strands for both noodle types became thicker as starch damage increased and as particle size became coarser. Instrumental assessment of cooked noodle texture showed that maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), stress relaxation time (SRT), chewiness (CHE), and springiness (SPR) were influenced by the type of alkaline reagent. Flour particle size and starch damage also influenced noodle texture but the magnitude of the effects and the trends were dependent on alkaline reagent. MCS of kansui noodles was much greater than for sodium hydroxide noodles. MCS of kansui noodles increased as starch damage increased but, in contrast, MCS of sodium hydroxide noodles decreased with increasing starch damage. REC of kansui noodles increased with increasing starch damage and decreased with larger particle size, whereas for sodium hydroxide noodles REC decreased with increasing starch damage and declined dramatically with larger particle size. Kansui noodles exhibited significantly shorter SRT than sodium hydroxide noodles. SRT of kansui noodles was only moderately affected by starch damage and particle size, whereas for sodium hydroxide noodles, SRT became much shorter as flour became coarser and starch damage became higher. CHE of kansui noodles was greater than for sodium hydroxide noodles. CHE of kansui noodles increased as starch damage increased. In contrast, CHE of sodium hydroxide noodles decreased as starch damage increased and also decreased as flour became coarser. SPR of both noodle types decreased as flour became coarser and starch damage became greater. On the basis of these experiments, flour of smaller particle size is an asset to the cooking quality of sodium hydroxide noodles, but high starch damage is to be avoided. For kansui noodles, the impact of flour particle size on cooked noodle texture was less evident and low starch damage, rather than high starch damage, was an asset.     

Effect of Amaranthus and Buckwheat Proteins on Wheat Dough Properties and Noodle Quality

Isoelectric protein concentrates (IPC) were prepared from one buckwheat (Fagopyrum esculentum) and five Amaranthus genotypes. Their effect on the mixing properties of a wheat flour was studied. Mixograph and dynamic oscillatory measurements showed significant increases in dough strength with the addition of 2 and 4% IPC, correlated to the water-insoluble fraction level of the IPC. The same IPCs were used at 2% level to supplement a wheat flour in making Chinese dry noodles. Measurable changes in both the raw and cooked noodle color were observed, and the change caused by addition of buckwheat IPC was substantial. Some of the IPCs caused an increase in cooking loss and only one caused an increase in weight, while increase in volume of the cooked noodles was not significantly affected. The changes in the rheological properties of cooked noodles due to addition of IPCs were measured. Overall, their effects were favorable, but the changes were statistically significant in only a few cases. The substantial dough-strengthening effect of the IPCs was hence not effectively translated into improved cooked noodle quality, and possible reasons for this are discussed.     

不同淀粉糊化及凝胶特性与粉条品质的关系

为了研究粉条加工过程中原料淀粉的糊化及凝胶特性对粉条品质的影响,该文对绿豆、红薯、马铃薯、大米和玉米等5种原料淀粉的糊化凝胶特性及其粉条品质进行了测定,并对淀粉糊化凝胶特性与淀粉粉条品质之间的关系进行探讨。结果表明:5种淀粉原料所制的粉条中,绿豆粉条的品质是较好,其次就是马铃薯粉条和红薯粉条,大米粉条和玉米粉条的品质较差;淀粉的糊化特性与粉条品质之间具有显著相关性,按显著程度的大小(P值大小)依次是:峰值黏度谷值黏度衰减值回生值、最终黏度;淀粉凝胶的硬度、弹性、黏性和咀嚼性对粉条品质的影响较大,按显著程度的大小(P值大小)依次是:硬度黏性咀嚼性弹性。在粉条加工原料选择及粉条品质改善中可以考虑用谷值黏度、回生值以及淀粉凝胶特性特征值回复性、咀嚼性和黏性作为考核衡量指标。研究结果为粉条生产中原料选择及品质改善提供参考依据。     

Production of Bihon-type Noodles from Maize Starch Differing in Amylose Content

Maize starches extracted from selected maize cultivars with 0.2–60.8% amylose contents were used to produce bihon-type noodles. Starch dough using a pregelatinized starch binder was prepared and extruded through a laboratory-scale extruder simulating the traditional process of making bihon in the Philippines. The normal maize starches with amylose content of ≈28% were successfully used for bihon-type noodle production, but waxy maize starches with 0.2–3.8% amylose content and high-amylose maize starches with 40.0–60.8% amylose content failed to produce bihon-type noodles. Viscoamylograph profile parameters and swelling volume are significantly correlated to amylose content of maize starch samples evaluated. These physicochemical properties may be used to indicate that the starch samples at normal amylose levels may be used for bihon-type noodles. Starch noodles produced in the laboratory were not significantly different in terms of either cooking quality or textural properties from two commercially produced maize noodle samples, except for adhesiveness. The laboratory process and fabricated extruder can be used to produce bihon-type noodles.     

Quality and Fortificant Retention of Rice Noodles as Affected by Flour Particle Size

Rice noodles, which are widely consumed noodles in Southeast Asia, were evaluated as a potential carrier for fortificants such as vitamin A, folic acid, and iron. Because flour particle size was found to affect the noodle properties, this study was conducted to investigate the effect of five different particle sizes (≤63, 80, 100, 125, and 140 µm) of dry‐milled rice flour on the cooking quality, microstructure, texture, and sensory characteristics of the rice noodles. The retention of fortificant in the noodles at every stage of processing as affected by the flour particle size was also determined. It was found that the rice noodles produced from flour with the smallest particle size studied (≤63 µm) had the best quality and were the most liked by the consumers. In addition, the noodles had the most compact and regular structure, which could be attributed to having the most severely gelatinized starch. This starch would have caused the least leaching of the fortificant into the surrounding water during the boiling stage of the rice noodle processing. Retention of iron in the cooked fortified rice noodles prepared from flour with the smallest particle size was high at around 87%, whereas that of vitamin A and folic acid were below 15%. Because the losses of the fortificant from the rice noodles were mostly owing to the boiling process, further improvements of the rice noodle processing conditions are required for reduction of the vitamin losses.     

Significance of Amylose Content of Wheat Starch on Processing and Textural Properties of Instant Noodles

The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch.     

Genotypic Variation in Nutritional Composition of Buckwheat Groats and Husks

Buckwheat (Fagopyrum esculentum), a highly nutritious pseudocereal rich in bioactive compounds, is principally cultivated in central and eastern European countries. Buckwheat groats and husks of 10 cultivars were subjected to nutritional composition analysis and in vitro starch digestibility determination. Significant genetic variation was detected in buckwheat groats for 1,000‐kernel weight (16.5–39.8 g), protein content (10.2–17.9%), soluble dietary fiber (1.4–3.4%), insoluble dietary fiber (2.3–8.6%), total dietary fiber (3.6–10.6%), free phenolics (4.5–17.1 mg of gallic acid equivalent [GA]/g), and total phenolics content (6.8–20.7 mg of GA/g). The buckwheat husks exhibited large differences between cultivars in protein content (3.0–6.5%), bound phenolics (6.7–26.1 mg of GA/g), and total phenolics content (32.4–58.6 mg of GA/g), which was 1.5–8 times higher than in the groat. Cooked and cooled buckwheat groats exhibited lower starch digestibility and greater resistant starch content than raw buckwheat groats. Buckwheat cultivars with unique nutritional composition, such as Co901 and Ta‐1, were identified for future breeding.     

Noodle Quality as Related to Sorghum Starch Properties

Starch was extracted from 10 sorghum genotypes and physicochemical properties (amylose content and pasting, textural, and thermal properties) were evaluated. The amylose content was 24–30%. DC‐75 starch had the highest peak viscosity (380 Rapid Visco Analyser units). Gelatinization peak temperature occurred over a narrow range (67–69°C). Genotypes Kasvikisire and SV2 produced white starches. Starches from other genotypes were different shades of pink. The starch noodles prepared were, accordingly, either white or pink. Cooking enhanced the pink coloration of noodles. Cooking loss, noodle rehydration, and elasticity were evaluated. Cooking loss was low (mean 2.4%). Noodle elasticity was highly correlated with starch pasting properties of hot paste viscosity (HPV) (r = 0.81, P < 0.01) and cold paste viscosity (CPV) (r = 0.75, P < 0.01). Noodle rehydration was significantly correlated to the initial swelling temperature of starch (T_i) (r = ‐0.91, P < 0.001) and gelatinization peak temperature (T_p) (r = 0.69, P < 0.05). The findings suggest a potential area of food application for sorghum genotypes of different grain colors. Evaluation of starch properties could be a good starting point for selecting sorghum genotypes with superior noodle‐making properties.     

Textural and Other Quality Properties of Instant Fried Noodles as Affected by Some Ingredients

The effects of varying the proportion of three noodle dough components (water, gum, and starch) on the texture (maximum load and strain at break), amount of fat absorbed, and percent rehydration of instant fried noodles were studied. The Instron Universal testing machine was used to measure noodle texture, whereas quality attributes were determined using fat absorption and rehydration parameters. The results showed that changes in maximum load, strain at break point, fat absorption, and rehydration% of instant noodles depended on interactions between the ingredients. Increasing the gum content, starch content (for amounts >4% kg/kg of flour) and moisture content (35–40% kg/kg of flour) enhanced the elasticity and extensibility of cooked instant fried noodles. Addition of starch decreased fat absorption but showed mixed effect on rehydration%. The effect of gum addition at 0.1, 0.2, and 0.3% on fat absorption was significant but reduced considerably or showed a reverse effect at higher starch addition levels. Increasing moisture, and gum contents increased rehydration% of cooked instant noodles. Appropriate combinations of gum, starch and moisture contents could be used to optimize textural and quality characteristics of fried instant noodles.     

Physicochemical Properties of Australian Flours Influencing the Texture of Yellow Alkaline Noodles

Flour properties of 25 Australian wheat cultivars were examined for their relationship to alkaline noodle quality. Rapid Visco Analyzer (RVA) analyses of flours showed that RVA breakdown and final viscosity determined in both water and dilute sodium carbonate were significantly related to the alkaline noodle firmness, elasticity, and surface smoothness. Flour swelling volume (FSV) of flours was negatively correlated with alkaline noodle firmness and elasticity, and positively correlated with surface smoothness of cooked noodles. Use of a dilute sodium carbonate solution led to overall increases in both paste viscosity and FSV. High FSV and low RVA final viscosity values were associated with both the softest noodles and with cultivars containing a null allele for granule-bound starch synthase on chromosome 4A. Flour protein content and SDS sedimentation volumes were significantly related to noodle texture. The relationship between protein content and noodle firmness was dependent on the Null4A status of the flours and suggested an interaction between starch and protein in determining noodle texture. Multiple regression analysis using flour protein and FSV accounted for 76% of the variation in alkaline noodle firmness. A speculative model of noodle structure was developed based on a concept of the cooked noodle as a composite material.     

Flour Characteristics Related to Optimum Water Absorption of Noodle Dough for Making White Salted Noodles

Physicochemical properties of 34 wheat flours with various classes and different protein contents were related to optimum water absorption of noodle dough. Club and soft wheat flours generally exhibited higher water absorption (34–37%) of noodle dough than hard wheat flours (31–35%). Optimum water absorption of noodle dough in three hard wheat flours with five different protein contents was 33–37%. Optimum water absorption was negatively correlated with flour protein content and SDS sedimentation volume. Physical properties of flour, damaged starch content, NIRS hardness and water retention capacity, influenced optimum water absorption of noodle dough from club, soft and hard wheat flours. A prediction equation developed using protein content, water retention capacity and SDS sedimentation volume of flour provides a reliable estimation of the optimum absorption of noodle dough for making noodles.     

Protein Quality of Wheat Desirable for Making Fresh White Salted Noodles and Its Influences on Processing and Texture of Noodles

Protein characteristics of wheat flours from various wheat classes, and of commercial flours for making noodles, were evaluated to determine the effects of protein content and quality on processing and textural properties of white salted noodles, as well as to identify protein quality required for making white salted noodles. SDS sedimentation volume based on constant protein weight, mixograph mixing time, and proportions of salt‐ and alcohol‐soluble protein of three commercial flours for making noodles were more similar to those of hard wheat than to soft wheat flours. SDS sedimentation volume of commercial flours for making noodles based on constant protein weight ranged from 38.5 to 40.0 mL and was higher than those of most soft wheat flours. Mixograph mixing time and proportion of salt‐soluble protein of hard and commercial flours for making noodles were >145 sec and mostly <13.8%, respectively, while those of club and soft wheat flours were < 95 sec and >15.0%. Both protein content and protein quality, as determined by SDS sedimentation volume based on constant protein weight, mixograph mixing time, proportion of salt‐soluble protein, and score of HMW‐GS compositions correlated with optimum water absorption of noodle dough and hardness of cooked white salted noodles.     

Predicted Glycemic Index and Glycemic Index of Rice Varieties Grown in Taiwan

Two cooked brown rice and six white rice varieties were selected for assessing the variations in predicted glycemic index (pGI) determined by using in vitro starch digestion and the glycemic index (GI) determined in vivo. Marked varietal differences in apparent amylose content, dietary fiber content, pGI, and GI were observed. Most of the tested rice samples were classified as medium‐GI foods. The varieties Khazar and Taikeng 9 were categorized as high‐GI foods when bread was used as the reference. But brown and white rice samples of TRGC9152 and Taichung Sen 17 fell into the low‐GI category when glucose was used as the reference. A significant correlation coefficient (r = 0.946) was found between pGI and GI of rice samples by using bread as the reference with a regression equation of GI = 28.778 + 0.717 × pGI (R² = 0.8951, P ≤ 0.001). Overall, the in vitro pGI measurement is a rapid and useful method to predict the GI of cooked rice samples.