Thermo-Mechanical Characterization of a Thermoplastic Copolyetherester (TPC): Experimental Investigation

In this article, the thermo-mechanical characterization of poly(butylene terephthalate)/poly(tetramethylene oxide) (PBT/PTMO) is studied by thermal analysis, dynamic mechanical analysis, and uniaxial tensile tests. The results of poly(ether esters) show that the melting temperature is equal to T _m =193 °C, which is 31 °C, lower than that of the melting temperature of poly(butylene terephthalate) (PBT). Its glass transition temperature, T _g is equal to -61 °C, determined by DMA. The melting and cooling temperatures (T _m , T _c ) after aging at T₀+48 h and T₀+week are virtually unchanged. Moreover, the results of the tensile tests show that the effect of the low deformation rate reduces the friction resulting from the sliding mechanisms between the amorphous and crystalline parts.     

Short-term daily forecasting of crop evapotranspiration of rice using public weather forecasts

Accurate forecasts of daily crop evapotranspiration (ET_c) are essential for real-time irrigation management and water resource allocation. This paper presents a method for the short-term forecasting of ET_c using a single-crop coefficient approach and public weather forecasts. Temperature forecasts with a 7-day lead time in 2013–2015 were retrieved and entered into a calibrated Hargreaves–Samani model to compute daily reference evapotranspiration (ET₀) forecasts, while crop coefficient (K_c) empirical values were estimated from both observed ET_c value and calculated ET₀ values using the Penman–Monteith equation for the period of 2010–2012. Daily ET_c forecasts of irrigated double-cropping rice were determined for three growing seasons during the period of 2013–2015 and were compared with ET_c values measured by the weighing lysimeters at the Jiangxi experimental irrigation station in southeastern China. During the early rice season, the average mean absolute error (MAE) and root-mean-square-error (RMSE) values of ET_c forecasts ranged from 0.95 to 1.06 mm day^?1 and from 1.18 to 1.31 mm day^?1, respectively, and the average correlation coefficient (R) ranged from 0.39 to 0.54; for late rice, the average MAE and RMSE values ranged from 1.01 to 1.09 mm day^?1 and from 1.32 to 1.40 mm day^?1, respectively, and the average R value ranged from 0.54 to 0.58. There could be three factors responsible for errors in ET_c forecasts, including temperature forecast errors, K_c value errors and neglected meteorological variables in the HS model, including wind speed and relative humidity. In addition, ET_c was more sensitive to changes in temperature than K_c. The overall results indicated that it is appropriate to forecast ET_c with the proposed model for real-time irrigation management and water resource allocation.     

Applicability of APSIM to capture the effectiveness of irrigation management decisions in rice-based cropping sequence in the Upper-Gangetic Plains of India

Rice–wheat (RW) production system, which covers over 13.5 million ha in the Indo-Gangetic Plains of south Asia, is vital for food and nutritional security and livelihood of millions of poor people in this part of the region. Availability of irrigation water under projected climate change scenarios is a great concern, and demonstration of the impact of different irrigation regimes on rice, wheat, and system yields is essential to adopt suitable water saving technologies to minimize risk. This study tested the ability of the agricultural production systems simulator (APSIM) model to simulate the effects of different irrigation regimes on yield, irrigation water requirement, and irrigation water productivity (WP_i) of rice, wheat, and RW system in upper-gangetic plains of India. The long-term simulated rice yield showed a steadily declining trend at an average rate of 120 kg ha^?1 yr^?1 (R ² = 0.94, p < 0.05), while long-term simulated wheat yields showed a lower declining trend at an average rate of 48 kg ha^?1 yr^?1 (R ² = 0.48, p < 0.05). The highest WP_i of 8.31 kg ha^?1 mm^?1 was observed under RW system with the rice irrigation (IR) regime of 8 days alternate wetting and drying (AWD) and five irrigations for wheat with a yield penalty of 25.5 %. The next highest WP_i was observed in the treatment with a 5-day AWD regime in rice and five irrigations for wheat, with a yield penalty of 20.1 %. Thus, we can suggest that a 5-day AWD irrigation regime for rice combined with five irrigations during wheat could be the best option under water limiting situations.     

Prediction of water quality effect on saturated hydraulic conductivity of soil by artificial neural networks

This study was conducted to investigate the impact of water salinity (EC_w) and sodicity (SAR_w) on saturated (K_s) and relative (K_r) hydraulic conductivities in two clay (C) and sandy clay loam (SCL) soils. The results showed that the K_s decreased with increasing SAR_w, and in all of water quality treatments, the K_s of SCL soil was higher than that of the C soil. Sodicity effect (even at high SAR_w) on the K_r of clay soil was minimized by high salinity. Although K_r of both soils similarly responded to EC_w and SAR_w, microstructure of clay soil was more sensitive to water quality. Effect of EC_w on soil structure was greater than that of SAR_w. In order to assess the applicability of artificial neural networks (ANNs) in estimating K_s and K_r, two types of FFBP and CFBP ANNs and two training algorithms, namely Levenberg–Marquardt (LM) and Bayesian regulation, were employed with two strategies of uniform threshold and different threshold functions. Multiple linear regressions were also used for K_s and K_r prediction. Based on the ANN results of second strategy, best topology (4–5–4–1) was belonged to CFBP network with LM algorithm, LOGSIG–LOGSIG–TANSIG threshold functions, and values of MAE and R² are equal to 0.1761 and 0.9945, respectively. Overall, the efficacy of ANNs is much greater than regression method for K_s prediction.     

Identification and fine mapping of <Emphasis Type="Italic">Bph33</Emphasis>, a new brown planthopper resistance gene in rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Background

Host-plant resistance is the most desirable and economic way to overcome BPH damage to rice. As single-gene resistance is easily lost due to the evolution of new BPH biotypes, it is urgent to explore and identify new BPH resistance genes.

Results

In this study, using F_2:3 populations and near-isogenic lines (NILs) derived from crosses between two BPH-resistant Sri Lankan rice cultivars (KOLAYAL and POLIYAL) and a BPH-susceptible cultivar 9311, a new resistance gene Bph33 was fine mapped to a 60-kb region ranging 0.91–0.97 Mb on the short arm of chromosome 4 (4S), which was at least 4 Mb distant from those genes/QTLs (Bph12, Bph15, Bph3, Bph20, QBph4 and QBph4.2) reported before. Seven genes were predicted in this region. Based on sequence and expression analyses, a Leucine Rich Repeat (LRR) family gene (LOC_Os04g02520) was identified as the most possible candidate of Bph33. The gene exhibited continuous and stable resistance from seedling stage to tillering stage, showing both antixenosis and antibiosis effects on BPH.

Conclusion

The results of this study will facilitate map-based cloning and marker-assisted selection of the gene.

     

Effect of water management on soil respiration and <Emphasis Type="Italic">NEE</Emphasis> of paddy fields in Southeast China

Water management is an important factor in regulating soil respiration and the net ecosystem exchange of CO₂ (NEE) between croplands and atmosphere. However, how water management affects soil respiration and the NEE of paddy fields remains unexplored. Thus, a 2-year field experiment was carried out to study the effects of controlled irrigation (CI) during the rice season on the variation of soil respiration and NEE, with flooding irrigation (FI) as the control. A decrease of irrigation water input by 46.39% did not significantly affect rice yield but significantly increased irrigation water use efficiency by 0.99 kg m^?3. The soil respiration rate of CI paddy fields was larger than that of FI paddy fields except during the ripening stage. Natural drying management during the ripening stage resulted in a significant increase of the soil respiration rate of the FI paddy fields. Variations of NEE with different water managements were opposite to soil respiration rates during the whole rice growth stages. Total CO₂ emission of CI paddy fields through soil respiration (total R _soil) increased by 11.66% compared with FI paddy fields. The increase of total R _soil resulted in the significant decrease of total net CO₂ absorption of CI paddy fields by 11.57% compared with FI paddy fields (p < 0.05). There were inter-annual differences of soil respiration and the NEE of paddy fields. Frequent alternate wetting and drying processes in the CI paddy fields were the main factors influencing soil respiration and NEE. CI management slightly enhanced the rice dry matter amount but accelerated the consumption and decomposition of soil organic carbon and significantly increased soil respiration, which led to the decrease of net CO₂ absorption. CI management and organic carbon input technologies should be combined in applications to achieve sustainable use of water and soil resources in paddy fields.     

Potentiality of Potato Flour as Humectants (Anti-staling Agent) in Bakery Product: Muffin

The potential of potato flour as a humectant (anti-staling agent) was investigated. The experiment utilised eight variants of potato flour, prepared from processing cultivar K. Chipsona-1 and table cultivar K. Laukar, in muffins as a bakery product. On the basis of higher values of water retention and water absorption, and comparatively lower values of setback and flavour intensity, grilled (180 W for 25 min) potato flour from cultivar K. Laukar (GPF-T) was selected for muffin preparation. For optimization, muffins were prepared with GPF-T at 1, 3, 5 and 7% (w/w) level in the formulation. The storage study was conducted for 8 days at 25?±?2 °C and 55?±?5% RH. It was concluded from the product characterisation, sensory evaluation and storage study that 3% GPF-T can be used as a low-cost alternative to commercially available humectants for muffin preparation. Research findings may be adopted by small-scale industry entrepreneurs to delay the staling of muffins two-fold without adversely affecting the sensory scores.     

<Emphasis Type="Italic">Prunus persica</Emphasis> var. <Emphasis Type="Italic">platycarpa</Emphasis> (Tabacchiera Peach): Bioactive Compounds and Antioxidant Activity of Pulp,Peel and Seed Ethanolic Extracts

A comparative analysis of ethanol extracts from peel, pulp and seed of Prunus persica var. platycarpa (Tabacchiera peach) was done. The total phenol, flavonoid and carotenoid content as well as the antioxidant properties by using different in vitro assays (DPPH, ABTS, FRAP, Fe-chelating, β-carotene bleaching test) were evaluated. Pulp extract was subjected to liquid chromatography-electrospray-tandem mass spectrometry (HPLC-ESI-MS/MS). Gallic acid, protocatechuic acid, protocatechualdehyde, chlorogenic acid, p-coumaric acid, and ferulic acid were identified as main constituents. Pulp extract was characterized by the highest total phytonutrients content and exhibited the highest antioxidant activity in all in vitro assays (IC₅₀ values of 2.2 μg/mL after 60 min of incubation by using β-carotene bleaching test and 2.9 μg/mL by using Fe-chelating assay). Overall, the obtained results suggest that P. persica var. platycarpa displays a good antioxidant activity and its consumption could be promoted.     

Colorimetric Analysis of <Emphasis Type="Italic">Hibiscus</Emphasis> Beverages and their Potential Antioxidant Properties

In food industry, roselle beverages and their subproducts could be functional ingredients since they are an excellent source of bioactive compounds with improved performance due to their important anthocyanins content. The aim of this study was to analyze anthocyanin content and antioxidant properties of aqueous infusions elaborated with color contrasting Hibiscus materials and design a mathematical model in order to predict color-composition relationship. Color measurements of beverages from roselle (Negra, Sudan and Rosa) were made by transmission spectrophotometry, anthocyanins quantification was determined by HPLC, and antioxidant potential was evaluated by in vitro methods (ABTS and FRAP assays). Beverages prepared with particle size minor of 250 μm presented until 4- and 2- times more anthocyanins content and antioxidant capacity respectively, in comparison to beverages prepared with powders with particle size major of 750 μm. Positive correlations among pigments composition and color parameters were found (p?<?0.05), showing that anthocyanins content, antioxidant capacity, C*_ab and h_ab values increased in relation with the smallest particle size of flours. Also, mathematical models were stablished to predict anthocyanin content (r?≥?0.97) and antioxidant capacity (r?≥?0.89) from color data; we propose equations for quick estimation of the antioxidant capacity in the Hibiscus beverages with high anthocyanin content. The obtained models could be an important tool to be used in food industry for pigment characterization or functional compounds with potential health benefits.     

Seasonal deviation effects foliar endophyte assemblage and diversity in <Emphasis Type="Italic">Asparagus racemosus</Emphasis> and <Emphasis Type="Italic">Hemidesmus indicus</Emphasis>

Background

Fungal endophytes are the living symbionts which cause no apparent damage to the host tissue. The distribution pattern of these endophytes within a host plant is mediated by environmental factors. This study was carried out to explore the fungal endophyte community and their distribution pattern in Asparagus racemosus and Hemidesmus indicus growing in the study area.

Results

Foliar endophytes were isolated for 2 years from A. racemosus and H. indicus at four different seasons (June–August, September–November, December–February, March–May). A total of 5400 (675/season/year) leaf segments harbored 38 fungal species belonging to 17 genera, 12 miscellaneous mycelia sterile from 968 isolates and 13 had yeast like growth. In A. racemosus, Acremonium strictum and Phomopsis sp.1, were dominant with overall relative colonization densities (RCD) of 7.11% and 5.44% respectively, followed by Colletotrichum sp.3 and Colletotrichum sp.1 of 4.89% and 4.83% respectively. In H. indicus the dominant species was A. strictum having higher overall RCD of 5.06%, followed by Fusarium moniliforme and Colletotrichum sp.2 with RCD of 3.83% and 3%, respectively. Further the overall colonization and isolation rates were higher during the wet periods (September–November) in both A. racemosus (92.22% and 95.11%) and H. indicus (82% and 77.11%).

Conclusion

Study samples treated with 0.2% HgCl₂ and 75% EtOH for 30 s and 1 min, respectively, confirmed most favorable method of isolation of the endophytes. Owing to high mean isolation and colonization rates, September–November season proved to be the optimal season for endophyte isolation in both the study plants. Assessing the bioactive potential of these endophytes, may lead to the isolation of novel natural products and metabolites.

     

Growth behavior,productivity, leaf rolling,and soil cracks on transplanted rice in response to enforce surface drainage

Intermittent and prolonged dry spell during growth of transplanted rice is an important abiotic problem in north eastern region (NER). However, the productivity of rice in the region is very low, and this is mainly associated with reduced plant population, growth, and yield attributes with lower relative water content and leaf rolling with formation of soil cracks by erratic and aberrant rainfall. Keeping this in view, a field experiment on transplanted rice was conducted during two consecutive years 2011 and 2012 at NER of India, to evaluate the imposition of forced surface drainage (SD) at various growth stages (continuous drainage, SD at tillering, SD at panicle initiation, SD at booting, SD at flowering, SD at milking, and 15 days intermittent SD) and was compared with continuous flooding on growth and yield attributes, yield, relative water content, leaf rolling, and formation of soil cracks. Results revealed that continuous flooding has significant (p < 0.05) improved the plant population, growth and yield parameters, rice grain yield (3,406.7 kg ha^?1) and straw yield (4,683.3 kg ha^?1), relative water content maintained >90 %, no leaf roll, and soil crack. However, imposition of SD at tillering has lower tillers hill^?1, but yield was compensated by improvement in yield attributes. As per the availability of water, growers of the region can utilize the water for scheduling of water and most critical stages can be avoided by moisture stress to obtain higher productivity.     

Mechanical and Dynamic Mechanical Studies on Epoxy-Cobaltous Sulfate Polymer Hybrids

Cobaltous sulfate heptahydrate (CoSO₄·7H₂O) was incorporated as filler into diglycidyl ether of bisphenol A (DGEBA) based epoxy resin system, to prepare organic-inorganic polymer hybrid materials. Mechanical tensile studies and dynamic mechanical analysis (DMA) were carried out in order to study the static and dynamic mechanical properties of the prepared hybrid films. Mechanical tensile studies were carried out at room temperature, at a test speed of 30 mm/min. Highest tensile strength of 24.74±2.42 MPa was achieved for 4.44 wt% filler level (FL), along with an increase in the value of Young’s modulus. Storage modulus (E′), loss modulus (E″), damping factor (tan δ) were obtained by DMA studies. Glass transition temperature (T_g) was obtained for pure epoxy and filled epoxy, for various FLs varying from 0.28 wt% to 5.00 wt%. Pure epoxy showed highest T_g value compared to filled epoxy hybrids. Highest storage modulus of 9.5 GPa was obtained for 2.22 wt% FL, which also showed highest loss modulus peak. Parameters like effectiveness coefficient (C) and crosslink density were calculated from the storage modulus data. Loss modulus and tan δ curves were analyzed to study the energy dissipation properties of prepared hybrid films. Activation energy (E_a) value for glass transition was obtained from damping factor (tan δ), which showed highest E_a value of 630.5 kJmol^-1, for 4.44 wt% FL. DMA studies for various FLs were carried out at different test frequencies in order to study the changes in dynamic mechanical properties of the prepared hybrid materials with respect to frequency     

Effects of rice and rye straw extracts on the growth of a cyanobacterium, <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis>

This study investigated the effect of extracts with time (a range of extraction periods: 0.2 days to maximum 150 days) of rice and rye straw on the growth of Microcystis aeruginosa (a cyanobacterium). The effect was assessed by an effective concentration 50 (EC₅₀) of extracts measured by a carbon (C) content, when 50% normalized maximum growth yield (50% inhibition effect) of M. aeruginosa occurred. We found that extracts of rice and rye straw inhibited the growth of M. aeruginosa. Extracts from the earliest incubation phase (0.2 days) for rice straw and the 40-day extract for rye straw showed the most inhibitive EC₅₀ value of 28.0 mg C L^?1 and 18.9 mg C L^?1, respectively. The inhibition effect was positively related to the extraction period of the rye straw, but inversely of the rice straw. Our results suggested that the long-term decomposition of extracts during straw extraction be linked with the formation of allelochemicals. These results provided information on how allelochemicals derived from agricultural by-products affect algal growth in aquatic ecosystems.     

Divergent evolution of rice blast resistance <Emphasis Type="Italic">Pi54</Emphasis> locus in the genus <Emphasis Type="Italic">Oryza</Emphasis>

Background

The rice blast resistance gene Pi54 was cloned from Oryza sativa ssp. indica cv. Tetep, which conferred broad-spectrum resistance against Magnaporthe oryzae. Pi54 allelic variants have been identified in not only domesticates but also wild rice species, but the majority of japonica and some indica cultivars lost the function.

Results

We here found that Pi54 (Os11g0639100) and its homolog Os11g0640600 (named as #11) were closely located on a 25 kbp region in japonica cv. Sasanishiki compared to a 99 kbp region in japonica cv. Nipponbare. Sasanishiki lost at least six genes containing one other R-gene cluster (Os11g0639600, Os11g0640000, and Os11g0640300). Eight AA-genome species including five wild rice species were classified into either Nipponbare or Sasanishiki type. The BB-genome wild rice species O. punctata was Sasanishiki type. The FF-genome wild rice species O. brachyantha (the basal lineage of Oryza) was neither, because Pi54 was absent and the orientation of the R-gene cluster was reversed in comparison with Nipponbare-type species. The phylogenetic analysis showed that #11gene of O. brachyantha was on the root of both Pi54 and #11 alleles. All Nipponbare-type Pi54 alleles were specifically disrupted by 143 and 37/44?bp insertions compared to Tetep and Sasanishiki type. In addition, Pi54 of japonica cv. Sasanishiki lost nucleotide-binding site and leucine-rich repeat (NBS–LRR) domains owing to additional mutations.

Conclusions

These results suggest that Pi54 might be derived from a tandem duplication of the ancestor #11 gene in progenitor FF-genome species. Two divergent structures of Pi54 locus caused by a mobile unit containing the nearby R-gene cluster could be developed before domestication. This study provides a potential genetic resource of rice breeding for blast resistance in modern cultivars sustainability.

     

Assessing the performance of a conceptual tight-fitting body mapping sportswear (BMS) kit in a warm dry environment

The main objective of this study was to evaluate the actual performance of a conceptual body mapping sportswear (BMS) kit while doing different activities in a warm dry condition. Eight subjects participated in this study and each subject underwent two trials. Each trial was composed of 40 min treadmill walking at 5.0 km/h, 10 min resting, 20 min treadmill running at 10.0 km/h and a final 20 min resting. All trials were performed in a chamber where the T _a =30±0.5 °C, RH=40±5 % and v _air =0.17±0.05 m/s. Human physiological and perceptual responses in CON (i.e., traditional cotton sportswear) and BMS were measured and compared. It was found that both physiological responses (such as core temperature, mean skin temperature, mean torso temperature, mean body temperature and hear rate) and local subjective sensations (e.g., thermal sensation) were improved in BMS during the running phase as well as the second recovery phase. It was thus concluded that the conceptual BMS kit does have advantages over traditional cotton sportswear in terms of improvements on both physiological responses and local subjective sensations.     

Changing Phenology of Potato and of the Treatment for its Major Pest (Colorado Potato Beetle) – A Long-term Analysis

Potato Solanum tuberosum is one of the world’s four most important crops. Its cultivation is steadily increasing in response to the need to feed a growing world population. The yield of potato is influenced inter alia by both climate and pests. The main defoliator pest of potato is Colorado potato beetle Leptinotarsa decemlineata. Using data from a long-term experiment (1958–2013) in western Poland, we show that increasing temperature has affected the trophic relationship between potato and Colorado potato beetle. The planting, leafing, flowering and harvest dates for potato were advanced, after controlling for different cultivars, by 2.00 days, 3.04 days, 3.80 days and 3.42 days respectively for every 1 °C increase in temperature. In contrast, first treatment against Colorado potato beetle advanced by 4.66 days for every 1 °C increase in temperature, and, furthermore, the number of treatments against the beetle increased by 0.204 per 1 °C increase in temperature. This suggests that the beetle responds faster to increasing temperature than the plant does, but both parts of the system are probably greatly modified by farming practices.     

A novel Rice QTL <Emphasis Type="Italic">qOPW11</Emphasis> Associated with Panicle Weight Affects Panicle and Plant Architecture

Background

The improvement of rice yield is a crucial global issue, but evaluating yield requires substantial efforts. Rice yield comprises the following indices: panicle number (PN), grain number per panicle (GN), 1000-grain weight, and percentage of ripened grain. To simplify measurements, we analyzed one panicle weight (OPW) as a simplified yield index that integrates GN, grain weight, and percentage of ripened grain, and verified its suitability as a proxy for GN and grain weight in particular.

Results

Quantitative trait locus (QTL) analysis using 190 recombinant inbred lines derived from Koshihikari (large panicle and small grain) and Yamadanishiki (small panicle and large grain), japonica cultivars detected three QTLs on chromosomes 5 (qOPW5), 7 (qOPW7) and 11 (qOPW11). Of these, qOPW5 and qOPW11 were detected over two years. qOPW5 and qOPW7 increased OPW, and qOPW11 decreased it at Yamadanishiki alleles. A chromosome segment substitution line (CSSL) with a genomic segment from Yamadanishiki substituted in the Koshihikari genetic background harboring qOPW5 increased grain weight. qOPW11 had the largest genetic effect of QTLs, which was validated using a CSSL. Substitution mapping using four CSSLs revealed that qOPW11 was located in the range of 1.46 Mb on chromosome 11. The CSSL harboring qOPW11 decreased primary and secondary branch numbers, culm length, and panicle length, and increased PN.

Conclusions

In this study, three QTLs associated with OPW were detected. The CSSL with the novel and largest QTL, qOPW11, differed in some traits associated with both panicle and plant architecture, indicating different functions for the meristem in the vegetative versus the reproductive stages. qOPW5 coincided with an identified QTL for grain width and grain weight, suggesting that qOPW5 was affected by rice grain size. OPW can be considered a useful trait for efficient detection of QTLs associated with rice yield.

     

Infiltration properties of paddy fields under intermittent irrigation

Puddling and recurring intermittent irrigation, common praxis in wet rice cultivation, modify the soil structure and therewith cause a temporal variation of the infiltration properties. This study attempts to evaluate the temporal variation of the infiltration rates of plough pan (vertical infiltration) and paddy fields’ surrounding bunds (bund infiltration) by analyzing (i) the infiltration rate as a function of time, (ii) the relationship between ponding water depth and infiltration rate, and (iii) the influence of cultivation age on vertical water loss and cross-flow through bunds. Two experimental fields with respective cultivation ages of 30 (A) and 7 (B) years were investigated. The results revealed that the time series of vertical infiltration rate (IR _v) was with time consistency and the persistency of the bund infiltration was uncertain. The mean infiltration rate into the plough pan of A and B was 3.34 and 1.01 cm d^?1, respectively. A total water depth of 230 and 85 cm would be, respectively, lost in A and B through the plough pan during rice growing season. The correlation coefficient between ponding water depth and IR _v was ?0.48 and ?0.81 in A and B, respectively, demonstrating that the dynamic IR _v in the old paddy field was less affected by the drying and wetting cycles. It is concluded that rice paddies which have been taken into cultivation since only a few decades may contribute to water losses. Maintenance of equilibrium condition between ponding and drying stages and careful preparation of bunds may reduce water loss.     

Enhanced <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> f. sp. <Emphasis Type="Italic">tuberosi</Emphasis> Resistance in Transgenic Potato Expressing a Rice GLP Superoxide Dismutase Gene

Germin like proteins (GLPs) are a large group of related and ubiquitous plant proteins which are considered to be involved in different processes important for plant development and defense. Multiple functional copies of this gene family have been reported in a number of species (wheat, barley, rice, soybean mosses and liverwort), and their role is being evaluated by gene regulation studies and transgenic approaches. To analyze the role of a rice (Oryza sativa) root expressed germin like protein1 OsRGLP1, for its antifungal activity, transgenic potato plants were developed. These transgenic potato plants were molecularly characterized and biologically assessed after inoculation with Fusarium oxysporum f. sp. tuberosi. Functional analysis showed high accumulation of H₂O₂, increased Superoxide Dismutase (SOD) activity and no oxalate oxidase activity (OxO) in transgenics in comparison to nontransformed control. This increased SOD activity, resistance to heat and sensitivity to H₂O₂ suggest it is a Fe-like SOD. OsRGLP1 expression in potato plants exhibited enhanced resistance in comparison to nontransformed wild type plants suggesting its role in providing protection against Fusarium oxysporum f. sp. tuberosi through elevated SOD level. Overall, results suggest that OsRGLP1 is a candidate for the engineering of potato plants with increased fungal tolerance however, the greater height and tuber number was observed. This phenotype associated with the resistance needs to be evaluated to determine if this is a positive or negative feature.