Natural dyeing of cotton with <Emphasis Type="Italic">Xylocarpus granatum</Emphasis> bark extract: Dyeing,fastness, and ultraviolet protection properties

In this research we investigated the dyeing of cotton fabrics with extracts of Xylocarpus granatum, a mangrove plant with a long history of use in leather tanning and textile dyeing. X. granatum bark was extracted and spray-dried, yielding a tannin-rich, reddish-brown powder. This powder proved a suitable colorant for the natural dyeing of cotton with promising color fastness properties to wet treatments (washing, water, sea water, and perspiration), hot pressing, crocking, and light exposure. However, the dye alone produced only weak levels of coloration and therefore metallic salt mordants were employed to improve the color strength, through the formation of insoluble tannate complexes. The resulting fabric K/S values were dependent on the mordant used and exhibited the following trend: ferric sulfate > sodium dichromate > copper sulfate > potassium aluminum sulfate > no mordant, for fabrics exposed to mordants before and after dyeing. Mordanting resulted in slight variations in shade and color fastness. In most cases, the color fastness properties were preserved, except for color fastness to light and hot pressing, for which lowered ratings were found for some mordants. Stiffness and mechanical performance were not greatly affected by dyeing or mordanting, except for sodium dichromate mordanting which significantly stiffened and weakened the fabric. The ultraviolet protection factor (UPF) of all the dyed samples achieved the maximum (50+) level, highlighting the excellent UV shielding properties of the fabric. Overall, X. granatum bark extract is a promising, effective colorant for the natural dyeing of cotton in terms of appearance, fastness, and physical characteristics.     

Natural Dyeing of Wool by Madder (<Emphasis Type="Italic">Rubia tinctorum L</Emphasis>.) Root Extract Using Tannin-based Biomordants: Colorimetric,Fastness and Tensile Assay

In this work, the natural dyeing behavior of woollen yarn with madder (Rubia tinctorum L.) root extract was studied. The effects of different tannin-rich plants (Rhus coriaria, Eucalyptus, Terminalia chebula, Quercus castaneifolia, Pomegranate) extract as biomordants and alum (as a chemical mordant) with two mordanting procedures (pre- and metamordanting) on color characteristics of the dyed samples were also investigated. The CIEDE2000 values, color strength (K/S), washing fastness and tensile property of the mordanted and dyed samples were assessed. Visually, a range of hues from orange to brownish-red were obtained. In general, pre-biomordanted samples with Rhus coriaria (10 %owf), Eucalyptus (10 %owf), Terminalia chebula (5 %owf), Quercus castaneifolia (5 %owf) and Pomegranate (5 %owf) showed almost the same color difference (ΔE₀₀) and wash fastness values compared to those treated with 3 %owf alum. Finally, it was concluded from the comparative studies that the biomordants have good potential to be considered as alternatives to the common chemical mordants.     

The Use of Sumac as a Natural Mordant in Green Production of Iranian Carpet

Dyeing is a state-of-the-art realm of textile engineering, however, the emphasis on petroleum-based products is now shifting towards green fibers, particularly, green manufacturing processes. In the present work, a natural mordant, sumac, was extracted and used alone and in combination with alum (a mineral mordant) in silk fibers dyeing with madder and Reseda green dye to make the green production of Iranian carpet possible. The FT-IR ATR spectra of the washed, mordanted, and mordanted dyed silk fibers revealed bonding between silk fibers and green materials. The color of the silk fibers dyed with madder and Reseda extraction was quantified in terms of CIELab (L*, a*, and b*) and K/S values. The effects of different treatments on fastness properties including light, wash, and rubbing fastness were assessed by ISO standard test method.     

Synthesis and spectral characterization of novel azomethine disperse dyes derived from pyrazolone moiety and their dyeing performance on polyester fabrics

A series of new azomethine dyes based on pyrazolone system have been synthesized via different routes. The solvatochromism for the dyes was evaluated with respect to spectroscopic properties in various solvents. The dyes were applied as disperse dyes on polyester fabrics and gave shade poor to excellent light fastness, washing, perspiration, sublimation, and rubbing fastness properties. Also the position of color in CIELAB coordinates (L*, a*, b*) and K/S value were investigated.     

Extraction,Dyeing, and Antibacterial Properties of <Emphasis Type="Italic">Crataegus Elbursensis</Emphasis> Fruit Natural Dye on Wool Yarn

Fruits obtained from shrubs of the Crataegus elbursensis (C. elbursensis) plant demonstrate significant antioxidant and antibacterial properties. In this study, natural dye was sono-extracted from fresh and dried fruits and applied in dyeing and antibacterial finishing of wool. The maximum sono-extraction yield was obtained when optimal conditions of ethanol/ water (4/1 v/v) as extracting solvent, time 30 min, pH 4, temperature 50 oC, and C. elbursensis concentration 10 g/l were used. When wool yarns were dyed with the extracted natural dye, the maximum dye uptake was achieved using dye concentration 75 % owf, and dyeing condition of 100 oC, 60 min, pH 4, and LR 100:1. Different metal salts like aluminum sulfate, copper sulfate, and tin chloride were applied on wool by pre-mordanting method and their effects on dye uptake, color variation, and color fastness were examined. Results showed that the natural dye itself had relatively high uptake and good color fastness on un-mordanted wool. Further, each mordant had different effect on dye uptake, color variation, and color fastness properties depending on its coordination ability with dye molecules and wool chains. Moreover, dyed yarns showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria.     

Exploring the potential uses of <Emphasis Type="Italic">Vitis vinifera</Emphasis> L. leaves as raw material for textile dyeing without metal mordants

This paper explores the potential uses of the aqueous extract of Vitis vinifera L. leaves in dyeing linen and silk fabrics without a metal mordant. The focus will be on investigating the tinctorial potential of Vitis vinifera L. leaves and its dyeing properties. The anthocyanins amounts of leaves from different Vitis vinifera L. varieties were determined by the spectrophotometry method. The effect of the main dyeing parameters (pH of the dye bath, temperature, and dyeing duration) on the dyeing quality results has been studied. Tannic acid and pomegranate peel extract have been used as a natural mordant. Experimental results have shown that fastness properties of dyed fabrics ranged from average to very good.     

Dyeability and Antibacterial Finishing of Hemp Fabric Using Natural Bioactive Neem Extract

Two functional compounds were successfully extracted from neem (Azadiracta indica): a tannin-rich natural dye and an antibacterial agent. The dye was extracted from the bark using water, and the antibacterial from the leaf using methanol. These were used to dye hemp fabrics. Higher color strength values (K/S) were found when dyeing was conducted at a higher dye concentration, elevated temperature, and longer dyeing time. Optimal results were achieved when using 5 %w/v of extracted powder at 100 °C for 60 min. The resulting fabrics appeared reddish-brown, and were rated as good to excellent for color fastness against washing, water, sea water, and perspiration. The antibacterial agent from the neem leaf was extracted by Soxhlet apparatus at 65 °C with methanol as solvent. The dyed and antibacterial-finished hemp fabrics were tested against Staphylococcus aureus, following the percentage reduction test of AATCC 100. The treated fabrics demonstrated a 99.99 % reduction in Staphylococcus aureus.     

Dyeing properties of bi-functional reactive dyes on a novel regenerated cellulosic fiber

Three bi-functional reactive dyes such as Bis(vinylsulphone) type, Bis(monochlorotriazine) type and Bis(mononicotinotriazine) type were applied to regular viscose rayon and new regenerated cellulosic fiber (enVix®) which was prepared from cellulose acetate fiber by the hydrolysis of acetyl groups, and their dyeing properties and fastness properties were compared.enVix exhibited better dyeability and fastness than regular viscose rayon and these results were also explained by the differences in the supramolecular structure of these two fibers.     

Extraction of natural dye from <Emphasis Type="Italic">Coreopsis tinctoria</Emphasis> flower petals for leather dyeing − An eco-friendly approach

This study evaluated the extraction of two colors of dye (yellow and brown) from Coreopsis tinctoria flower petals using ultrasound and the dyeing of leather with the extracted dyes as a source of nontoxic and eco-friendly dye. The results showed an increase in the dye extraction values with increasing time at 100 W ultrasonic power at 80 °C for 1 h. Leather dyeing was optimized with the aid of ultrasound and magnetic stirring. The optimum leather dyeing conditions, with respect to the dye uptake, dye penetration and intensity of the color, were determined to be 12 % dye concentration, 100 W power, 1,000 rpm, and pH 7.0 for 60 min at 80 °C. It was shown that sonication improves dye exhaustion from a 90 % to 60 % rating for 1 h of dyeing time. The dyed leather was assessed by reflectance measurements and compared with visual assessment data. The fastness properties of dyed leather samples showed good fastness against washing, light, and dry and wet rubbing. The strength properties were not significantly altered and the bulk properties, such as softness, were found to be improved by the use of Coreopsis tinctoria yellow and brown dyes using an ultrasonic and magnetic stirring dyeing process.     

Bioactive and multifunctional textile using plant-based madder dye: Characterization of UV protection ability and antibacterial activity

In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.     

Application of <Emphasis Type="Italic">Sterculia Foetida</Emphasis> Fruit Shell Waste Biomolecules on Silk for Aesthetic and Wellness Properties

There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.     

Synthesis of hydrophilic copolyesters and the characterization of their moisture-related cooling properties

A series of copolyesters (Co-PETs) containing poly(ethylene glycol) (PEG), 5-sodiumsulfodimethyl isophthalate (DMS), and dimethyl isophthalate (DMI) were synthesized via the conventional two-step melt-polycondensation method. The synthesized Co-PETs were characterized by ¹H-NMR spectroscopy, FT-IR spectroscopy, differential scanning calorimeter (DSC), and thermogravimetric analyzer (TGA). The DSC results showed that the melting temperature (T _m) and the heats of fusion (ΔH _m) of Co-PETs decreased with increasing the DMS content in Co-PET, while the inclusion of PEG did not affect their thermal properties significantly. The water absorption and the water contact angle of the Co-PET films were found to be significantly affected by the DMS content rather than PEG content. The moisture-related cooling properties of the fabric samples made of Co-PET 5 as well as PET were evaluated by using liquid moisture management tester (MMT) and Q _max measurements. The MMT and Q _max results indicated that Co-PET 5 fabric containing DMS 1.0 mol% and PEG 10.0 wt% in Co-PET seemed to be a good candidate for the fabric having durable cooling effects.     

Light fast monoazo dyes with an inbuilt photostabilizing unit: Synthesis and computational studies

A series of monoazo disperse dyes with a photostablilizing o-hydroxycarbonyl moiety was incorporated resulted in the enhancement of the light fastness properties on polyester and nylon substrates as compared to the dyes that do not possess the photostablilizing moiety. The geometries of the azo and the hydrazone tautomeric forms of all dyes were optimized at B3LYP/6-311+G(d) and electrophilicity index was calculated for propensity of the moiety to absorb electrons. The values of absorption and stability trend of the dyes were in good agreement with the trend of experimental light fastness values. These disperse dyes possess excellent wash fastness and moderate to good sublimation fastness on hydrophobic substrates.     

<Emphasis Type="Italic">Limoniastrum monopetalum</Emphasis> stems as a new source of natural colorant for dyeing wool fabrics

In the present study, an attempt has been made to dye the wool fabric with Limoniastrum monopetalum stems, as a source of natural dye, which has not been exploited so far. Optimization of extraction parameters was done. Optimum results of extraction process were obtained with a dye concentration of 60 g/l, a temperature of 90 °C during 100 min. The study of different factors effecting dyeability of wool fabrics by aqueous L. monopetalum stems extract showed that the pH of dye bath and dyeing temperature and time affected considerably the color yield. The best results were obtained at the following conditions; pH 2, 100 °C, and 60 min. Metal mordants, when used in conjunction with L. monopetalum dye, allowed to obtain various shades. The determination of phenolic contents of aqueous L. monopetalum stems extract showed a high amount of phenolic components. Based on RP-HPLC, the coloring extract of L. monopetalum stems contains tannins and polyphenols. The major identified phenolic compounds were procatechuic, Trans-cinnamic and gallic acids. Hence, aqueous L. monopetalum stems extract could be successfully exploited for dyeing wool fabrics with high color yield (K/S).     

One Step Thermochromic Pigment Printing and Ag NPs Antibacterial Functional Finishing of Cotton and Cotton/PET Fabrics

One step thermochromic pigment printing and antibacterial functionality of cotton (100 %) and cotton/polyester blend (50/50 %) were demonstrated in this study. The improvement in antimicrobial activity against G+ve (Bacillus cereus) and G-ve (E. coli), and pigment printability were achieved by inclusion of Ag-NPs (30 g/kg) into pigment printing paste followed by printing and microwave curing at 700 W for 5 min. Modes of interactions were proposed, and surface modification was also confirmed by SEM and EDX analysis that proved the presence of Ag-NPs in cotton and cotton/ polyester blended samples. The results indicated that the colour fastness to wash and rubbing was excellent, the surface roughness reduced, and exhibited good antibacterial activity against Bacillus cereus and E. coli bacteria.     

Preparation and Properties of Poly(lactic Acid)/PLA-<Emphasis Type="Italic">g</Emphasis>-ABS Blends

PLA/PLA-g-ABS blends were prepared and evaluated for mechanical properties performance. Firstly, carboxylic acid functionalized ABS particles were synthesized by grafting polymethacrylic acid (PMAA) onto ABS particle surface using potassium persulfate as an initiator. The reaction was followed by FTIR analysis. The resultant carboxylated ABS was melt mixed with virgin PLA in an internal mixer to obtain PLA/PLA-g-ABS blends. The obtained PLA/PLA-g-ABS blends were subject to injection molding to obtain specimens for testing evaluation. It was found that impact resistance values significantly outperformed neat PLA by 60 %, 87 %, and 150 % for PLA/PLA-g-ABS 10 wt%, PLA/PLA-g-ABS 20 wt%, and PLA/PLA-g-ABS 30 wt%, respectively. A significant increase in impact strength was contributable to ABS rubber which exhibited even dispersion and good interfacial adhesion. The impact strength was dependent on the percent loading of PLAg-ABS; the more the PLA/PLA-g-ABS the higher the impact strength value. In a similar manner, tensile strength increases when loaded with PLA/PLA-g-ABS albeit at lesser effect. Considering the percent elongation, a massive increase in percent elongation was recorded in case of PLA/PLA-g-ABS 20 wt% and PLA/PLA-g-ABS 30 wt%, implying that these blends were extremely flexible and tough when compared to neat PLA, control, and PLA/PLA-g-ABS 10 wt%.     

Antibacterial Coating of Cellulose by Iso-bifunctional Reactive N-halamine with the Dyeing Process of Reactive Dye

In this study, we synthesized a novel N-halamine precursor, sulfuric acid mono-[2-(4-[4-chloro-6-(2-[4,4- dimethyl-2,5-dioxo-imidazolidin-1-yl]-ethylamino)-[1,3,5]triazin-2-ylamino]-benzenesulfonyl)-ethyl] ester sodium (TB), which contains two reactive groups of monochloro triazine reactive groups and bis-sulphatoethylsolphone reactive groups. The structure of TB is similar to iso-bifunctional group reactive dyes and could be coated on cotton fabrics by covalent bonds through a reactive dyeing process. The cotton coated with TB was characterized by FTIR and SEM. After chlorination, the treated cotton fabrics showed excellent antibacterial efficacy and inactivated all inoculated S. aureus (ATCC 6538) and E. coli O157: H7 (ATCC 43895) within 1 min of contact. Over 85 % of tensile strength retained both in warp and weft directions after treatment and chlorination. Almost 80 % of active chlorine can be regained by treating with household bleach after extensive washing and long time storage.     

Dyeing and fastness properties of a reactive disperse dye on PET, nylon, silk and N/P fabrics

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and 100°C respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and 80°C yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.     

Application of triazole-containing gemini cationic darkening agent in cold pad batch dyeing for cotton knits

4-Amino-double(octadecyldimethyl ammonium chloride)-1,2,4-triazole (ADAC-TZ), a gemini cationic auxiliary with a heterocyclic triazole structure, was designed and synthesized by the method described here and characterized for use in the cold pad batch dyeing of cotton knits. The results show that, for ADAC-TZ, the critical micelle concentration (CMC) is 4.0×10^-4 mol/l, the Krafft point is 29.8 °C, the foam height is only 169 mm/5 min, and the solubilization for toluene is 6.67 ml/g, which means that ADAC-TZ exhibits excellent low-foaming, water solubility and solubilization properties. The present research also demonstrates that ADAC-TZ pretreatment can increase the K/S value, dye fixation, and color fastness to washing and rubbing of cotton knits dyed through BES reactive dye cold pad batch dyeing used in combination with the alkaline agent QF-4.     

Application of liquid organic salt to cotton dyeing process with reactive dyes

Reactive dyes are used widely in cotton dyeing process. Reactive dyeing uses high amounts of inorganic salts to accelerate dye exhaustion. These salts are then discharged to the effluent, leading to serious environmental problems. Biodegradable organic salts can alternatively be used in the dyeing process. In this paper, a new liquid organic salt was synthesized by acid-base neutralization, which was used to replace inorganic salts in reactive dyeing. Dye exhaustion in organic salt dyeing was similar to the values in conventional dyeing. However, dye fixations were slightly lower in organic salt dyeing than in conventional dyeing. The washing fastness of dyed fabrics with organic salt was excellent. Experimental results showed that dye exhaustion reached the maximum value when the concentration range of organic salt was from 20 g/l to 40 g/l. In addition, the optimal alkali concentration in organic salt dyeing was found to be about 30 g/l. These parameters suggested organic salt could replace inorganic salt in reactive dyeing process.