Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

Self-cleaning Properties of Nylon 6 Fabrics Treated with Corona and TiO<Subscript>2</Subscript> Nanoparticles under Both Ultraviolet and Daylight Irradiations

Nylon 6 fabric with self-cleaning properties was prepared by corona discharge pre-treatment and coating with TiO₂ nanoparticles (NPs) using pad-dry-cure technique. The self-cleaning property was studied by discoloration of methylene blue (MB), ketchup, tea and coffee stains from the corona+TiO₂ treated nylon-6 fabric. Color difference (ΔΕ*), reflectance (R) and K/S of MB stain were investigated by diffuse reflectance spectrophotometry. The MB stain was almost completely removed from the corona+TiO₂ treated nylon surface after 24 h under UV light/daylight irradiation. Both of these phenomena (corona and TiO₂) led to an increase in the discoloration of stains under UV and daylight irradiations. The EDS analysis showed an increase in the concentration of deposited TiO₂ NPs coating after corona treatment. The FE-SEM images revealed that the surface of nylon 6 was coarser after the corona treatment. Also, the FE-SEM micrographs exhibited that a uniform layer of TiO₂ NPs was formed on the corona treated nylon fabric. The corona+TiO₂ treated nylon illustrated antibacterial activity against E. coli and B. subtillis microorganisms. The EDS and FE-SEM analysis confirmed that after 5 washing cycles, the amount of TiO₂ NPs was higher on the surface of corona+TiO₂ treated nylon than that of the fabric only treated with TiO₂ without corona pretreatment. This result justifies that the corona+TiO₂ treated nylon fabric with appropriate self-cleaning property can be applied cost-effectively in the textile industry.     

Effect of nano SrTiO3 supporting nano TiO2 on self-cleaning of cotton fabric

This study reports the results of an investigation aiming at finding what affect nano titania (TiO₂) and nano strontium titanate (SrTiO₃) on self-cleaning of cotton fabrics. The photocatalytic activity of nano strontium titanate has been examined on cotton fabric under UV irradiation in various concentrations in mixing of nano titania. The amount of loaded nano titania and nano strontium titanate particles on cotton fabrics were investigated using X-ray fluorescence spectrometry (XRF) and crystallinity of coatings by X-ray diffraction spectroscopy (XRD). The treated cotton fabrics, which were stained with two common synthesized dyes, were exposed to 400 W UV radiation for 30 hours and their self-cleaning property was investigated by a reflectance spectrophotometer. Scanning electron microscope (SEM) images show pervasion of nano materials on the surface of the treated cotton. Adding nano strontium titanate to nano titania showed the most promising photocatalytic activity toward dye degradation.     

Functional Antibacterial Finishing of Woolen Fabrics Using Ultrasound Technology

The growing concern for the personal health and hygiene has created the necessity of acquiring wool fabric antibacterial activity. Silicon dioxide nanoparticles (SiO₂ NPs) have appropriate features to enhance the functional properties of wool fabrics, especially with polymer application. In this study efficient coating using polyethylene glycol (PEG₂₀₀₀) and SiO₂ NPs were used for imparting antibacterial properties to treated fabrics. All the treatments were carried out using both conventional and ultrasound techniques. The physical and chemical properties were evaluated using FTIR, XRD, and SEM. The result indicated that treated wool fabrics by PEG/SiO₂ NPs improved the dyeability and antibacterial of the fabrics and also enhanced its mechanical properties. Furthermore, it is believed that the ultrasound radiation causes homogeneous distribution of cross-links and polymerization throughout the wool surface. This offers considerable advantages compared to conventional treatment.     

Development of UV Protective,Superhydrophobic and Antibacterial Textiles Using ZnO and TiO<Subscript>2</Subscript> Nanoparticles

In this research work, multifunctional cotton fabric comprising of UV protection, superhydrophobicity and antibacterial activity has been developed using facile pad-dry-cure method. In the first step, the concentration of repellent chemical has been optimized. Then, formulations containing nanoparticles of ZnO or TiO₂ along with optimized concentration of repellent chemical and organic-inorganic binder have been applied to cotton fabric followed by the evaluation of functional properties. The surface morphology and elemental composition of treated fabric has been characterized through SEM and EDX, respectively. The treated samples have shown promising UV protection, superhydrophobicity and antibacterial properties durable upto 20 washing cycles.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Durable multifunctional properties on acrylic fabric using nano TiO2 and polysiloxane

Producing fabric with multifunctional properties has been recently a center of research and utilizing nanoparticles is an efficient approach to gain this purpose. Here, nano TiO₂ photo catalyst and polysiloxane softener were utilized as stabilizer on the acrylic fabric to obtain soft handle, hydrophilic, and self-cleaning features on the fabric. The effect of various concentrations of nano TiO₂ and polysiloxane on the fabric handle, water droplet absorption time, and self-cleaning properties of the fabric has been mathematically modeled based on the response surface methodology (RSM). The optimized treatment conditions indicated that treated acrylic fabric with 2.19 % polysiloxane and 0.68 % nano TiO₂ produced the rigidity of 26.8 g.cm, water absorption time of 15.8 s and self-cleaning of ΔE _T *=18.1. Also increasing the concentration of polysiloxane enhanced both wettability and photoactive properties of nano TiO₂ treated acrylic fabrics. Further, the nano TiO₂/polysiloxane treated acrylic fabrics is significantly enable to absorb the light with wavelength lower than 400 nm and improve discoloration of C.I. Reactive Yellow 1.     

Effect of Silver Particle size on color and Antibacterial properties of silk and cotton Fabrics

In this study silver nanoparticles with different particle sizes and hence colors were synthesized on silk and cotton fabrics through reduction of silver nitrate. Particle sizes of the silver colloids were measured by dynamic light scattering (DLS). The structure and properties of the treated fabrics were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis reflectance spectroscopy. Various characteristics of the treated fabrics including antibacterial activities against a Gram positive (Staphylococcus aureus) and a Gram negative (Escherichia coli) bacteria, color effect, wash and light fastness, water absorption, fabric rigidity, and UV blocking properties were also assessed. The results indicated that the treated fabrics displayed different colors in the presence of silver nanoparticles with different particle sizes and exhibited good and durable fastness properties. Also, the size of the silver particles had a tangible effect on antibacterial activity of treated fabrics and its antibacterial performance was improved by decreasing the size of particles. Moreover, this process imparted significantly UV blocking activity to fabric samples.     

Nano-TiO<Subscript>2</Subscript> based multilayer film deposition on cotton fabrics for UV-protection

Nano-TiO₂ based multilayer nanocomposite films were fabricated on cationically modified woven cotton fabrics by layer-by-layer molecular self-assembly technique. Cationization process was used to obtain cationic surface charge on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy analyses were used to verify the presence of cationic surface charge and multilayer films deposited on the fabrics. Scanning electron microscope micrographs of poly(sodium 4-styrene sulfonate)/TiO₂, nano polyurethane/TiO₂, and TiO₂/poly(diallyldimethylammonium chloride) multilayer films deposited on cotton fabrics were taken. With nano-TiO₂ based multilayer film deposition, the protection of cotton fabrics against UV radiation is enhanced. The UV protection durability of the self-assembled multilayer films deposited on the cotton fabrics was analyzed after 10 and 20 washing cycles at 40 °C for 30 min. Air permeability and whiteness value analysis were performed on the untreated and multilayer film deposited cotton fabrics. The effect of layer-by-layer deposition process on tensile strength properties of the warp and weft yarns was determined.     

A Novel Green Stabilization of TiO<Subscript>2</Subscript> Nanoparticles onto Cotton

Facile embedding of TiO₂ nanoparticles onto cotton fabric has been successfully attained by ultraviolet light irradiations. The adhesion of nanoparticles with fibre surface, tensile behaviour and physicochemical changes before and after ultraviolet treatment were investigated by scanning electron microscopy, energy dispersive X-ray and inductive couple plasma-atomic emission spectroscopy. Experimental variables i.e. dosage of TiO₂ nanoparticles, temperature of the system and time of ultraviolet irradiations were optimised by central composite design and response surface methodology. Moreover, two different mathematical models were developed for incorporated TiO₂ onto cotton and tensile strength of cotton after ultraviolet treatment and used further to testify the obtained results. Self-clean fabric through a synergistic combination of cotton with highly photo active TiO₂ nanoparticles was produced. Stability against ultraviolet irradiations and self-cleaning properties of the produced fabric were evaluated.     

Simultaneous synthesis of nano ZnO and surface modification of polyester fabric

In this study, synthesis of zinc oxide nanoparticles was carried out along with the hydrolysis of polyester fabric using sodium hydroxide to increase the surface activity and enhance the nanoparticles adsorption. The polyester fabrics were treated with zinc acetate and sodium hydroxide at different bath conditions, ultrasound and stirrer, resulting in formation of ZnO nanospheres and ZnO nanorods. The presence of zinc oxide with different shapes on the surface of the polyester fabrics was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Also, the X-ray diffraction patterns established the composition of wurtzite structure of zinc oxide. The self-cleaning property of treated polyester fabrics was evaluated through discoloring dye stain under sunlight irradiation. The antibacterial activities of the samples against two common pathogenic bacteria including Escherichia coli and Staphylococcus aureus were also assessed. The results indicated that the photocatalytic and antibacterial activities of the ultrasound treated polyester fabrics were superior compared to the stirrer treated samples.     

Effect of UV irradiation on cellulase degradation of cellulose acetate containing TiO<Subscript>2</Subscript>

Cellulose acetate (CA) films containing anatase type titanium dioxide (TiO₂) nanoparticles were prepared by solution casting. The film surface was modified by UV irradiation using a grid type UV irradiator. The UV irradiation caused slight increase in photodegradation of the CA films with TiO₂ compared to the CA film alone. However, CA films irrespective of TiO₂ content did not show a significant enzymatic degradation by a cellulase fromAspergillus niger without UV irradiation. Upon UV irradiation, the biodegradability remarkably improved even in the CA film without TiO₂. The irradiation of CA films decreased both the water contact angle and the degree of substitution (DS) implying the decrease in acetyl groups of the CA film surface due to the photo-scission of the acetyl group and photooxidation, resulting in more facile biodegradation of the surface film layer. The substantial enhancement in biodegradation of the UV irradiated CA film containing TiO₂ was attributed to the increased hydrophilicity, lowered DS and zeta potential due to the photoscission and the photooxidation effect of UV light. Also the increased surface area of the CA film due to the photocatalysis of TiO₂ particles may encourage the facile biodegradation.     

Nano titanium dioxide on wool keratin as UV absorber stabilized by butane tetra carboxylic acid (BTCA): A statistical prospect

Photo yellowing of wool is one of the most important problems which have negative impacts on various aspects of wool prompting scientists to find a solution over the past decades. In this research the protective features of nano-titanium dioxide particles against UV on wool fabric were discussed and the color variations of wool samples after UV irradiation were measured and reported. It was shown that nano TiO₂ is a suitable UV absorber and its effect depends on the concentration. Also, it was assumed that butane tetracarboxylic acid plays a prominent role as a cross-linking agent to stabilize the nano-titanium dioxide as well as a polyanion to maintain negative charges on the wool surface for higher nano particles absorption. Also the variables conditions were optimized using response surface methodology (RSM).     

Multifunctional polyester fabric using a multicomponent treatment

In this study, multifunctional polyester fabrics with the features of self-cleaning, water and stain repellency, and thermal stability were prepared utilizing a multicomponent system. To this end, both unmodified and alkaline-hydrolyzed modified fabrics were treated with nano TiO₂/citric or maleic acid/sodium hypophosphite/polysiloxane and triethanolamine via a pad-dry-cure method. Surface morphology and color variation of the samples were studied utilizing field emission scanning electron microscopy (FESEM) and CIE-Lab system, respectively. Also, energy-dispersive X-ray (EDX) analysis indicated the content of Ti, P and Si on the surface of fabrics. Thermal stability of the specimen was scrutinized through thermal gravimetric analysis (TGA) and char yield. Both hydrolysis treatment and silicone softener increased the uptake of the nanoparticles. Also, in a comparison between the utilized carboxylic acids, citric acid demonstrated superior features. Generally, the treated fabrics showed desirable self-cleaning and stain repellency with some enhanced thermal stability.     

Self-cleaning and handle properties of TiO2-modified textiles

Self-cleaning surfaces based on photocatalysis are an extremely promising nano-technological field of extensive research and development. Recently comprehensive research work has been performed to evaluate the optical, photocatalytic and antimicrobial properties of TiO₂ nano-particles and composites thereof. The aim of this study was to obtain self-cleaning properties for regenerate cellulose surfaces by nano-modification, using TiO₂ nano-coating and to define the impact of the modification on fabrics end-use properties. Two different modified fabrics with self-cleaning effect were prepared and analysed, i.e. the modification efficiency was determined. In addition, the influence of fibre modification on several textile properties was determined. However, a soft handle, good appearance and some other surface properties accompanied by appropriate mechanical properties represent the basis for a high quality fabric therefore the influence of the modification procedure on textiles handle was studied.     

Meta-mordant Dyeing with <Emphasis Type="Italic">Camellia sinensis</Emphasis> (L.) O. Ktze var. <Emphasis Type="Italic">waldensae</Emphasis> (S.Y.Hu) Chang (Yellow-bud Tea) Extract for Wool Fabrics Treated by UV Radiation

The wool fabrics were treated by ultraviolet (UV) radiation and then dyed with Camellia sinensis (L.) O. Ktze var. waldensae (S.Y.Hu) Chang (yellow-bud tea) extract using meta-mordant dyeing method. The results indicated that the hydrophilicity of wool fabrics was improved after UV radiation treatment, which was conducive in improving color performance for the meta-mordant dyeing with yellow-bud tea extract of wool fabrics. The optimal dyeing process was that the powdered extract (5.0 % o.w.f) and the CuSO₄ (2.0 % o.w.f) were added to the dyeing liquor, the pH value was adjusted to 3.5-4.0 by HCOOH, the wool fabrics treated by UV radiation for 10 min and then were dyed at a bath ratio of 1:50 under 95 °C for 70 min. By means of three-factor quadratic current rotation revolving design (TQCRRD) method, the computation results of the mathematical equations and models indicated that UV radiation was the most important factor for meta-CuSO₄ dyeing with yellow-bud tea extract for wool fabrics.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

Developing UV-protective cotton fabric based on SiO<Subscript>x</Subscript> nanoparticles

Nano-SiO_x suspension was prepared for its unique optical performance to improve the anti-ultraviolet property of cotton fabric in this paper. The experimental results showed that UV-resistance property of thus treated fabrics had been enhanced significantly. The spectrum of absorption, reflection, and transmittance of the treated fabric was analyzed during the optimized processing. The mechanical property of the treated fabric displayed a little increase compared with the original untreated fabric. The morphology of the treated fabric was studied by SEM. The UPF (Ultraviolet Protection Factor) of the fabric treated with nano-SiO_x suspension reached 62, much higher than that of the original untreated fabric. Moreover, after 50 home launderings, the UV-blocking property of treated fabric changed little due to the strong affinity between the nano-SiO_x particles and cotton fiber.     

Preparation and UV-protective property of PVAc/ZnO and PVAc/TiO<Subscript>2</Subscript> microcapsules/poly(lactic acid) nanocomposites

The poly(vinyl acetate) (PVAc)/zinc oxide (ZnO) microcapsule and PVAc/titanium dioxide (TiO₂) microcapsule were synthesized via in-situ emulsion polymerization method. The PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis(TG), transmission electron microscopy (TEM), and UV-visible spectroscopy (UV-vis). Effect of PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule on properties of poly(lactic acid) (PLA) was evaluated by UV-vis, SEM and mechanical properties test. The results showed that the addition of PVAc/ZnO and PVAc/TiO₂ microcapsules as a UV-blocking additive could significantly enhance UV-blocking property of PLA/PVAc/ZnO microcapsule composites and PLA/PVAc/TiO₂ microcapsule composites compared with pure PLA, PLA/ZnO composites and PLA/TiO₂ composites. The mechanical properties of PLA/PVAc/ZnO microcapsule composites were better than those of PLA/ZnO composites due to good dispersability and compatibility of PVAc/ZnO microcapsule in PLA matrix. Also, the mechanical properties of PLA/PVAc/TiO₂ microcapsule composites were better than those of pure PLA and PLA/TiO₂ composites. This study demonstrates the great potentials of the intrinsically UV shield additive PVAc/ZnO and PVAc/TiO₂ microcapsules in the application of high performance matrix resin and composite material.     

Application of silver nanoparticles to cotton fabric as an antibacterial textile finish

A novel nano-silver colloidal solution was prepared in one step by mixing AgNO₃ aqueous solution and an amino-terminated hyperbranched polymer (HBP-NH₂) aqueous solution under vigorous stirring at room temperature. All results of Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM) and UV/Visible Absorption Spectrophotometry indicated that silver nanoparticles had been formed in colloidal solution. Cotton fabric was treated with nano-silver colloid by an impregnation method to provide the cotton fabric with antibacterial properties. The whiteness, silver content, antibacterial activity and washing durability of the silver-treated fabrics were determined. The results indicated that the silver-treated cotton fabric showed 99.01 % bacterial reduction of Staphylococcus aureus and 99.26 % bacterial reduction of Escherichia coli while the silver content on cotton was about 88 mg/kg. The antimicrobial activity of the silver-treated cotton fabric was maintained at over 98.77 % reduction level even after being exposed to 20 consecutive home laundering conditions. In addition, the results of scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirmed that silver nanoparticles have been fixed and well dispersed on cotton fabrics’ surface and the major state of the silver presented on the surface was Ag⁰.