建筑垃圾细料生产流动化回填材料的性能

以灰砂比0.03、0.05和0.08,粉砂比0、0.05、0.1、0.15和0.2为设计参数,对建筑垃圾回填材料进行设计。通过试验对回填材料的流动性(流动度、泌水率)、无侧限抗压强度以及应力应变曲线、本构关系模型和弹性模量等进行研究。研究结果表明:回填材料的流动度受水固比影响较大,两者接近线性关系;流动度在200~250 mm范围,泌水率在4%~8%之间;回填材料抗压强度与灰砂比和水固比之间存在很好的幂指数关系;回填材料应力应变曲线形状与普通混凝土的相似,在此基础上提出回填材料的本构关系模型;回填材料无侧限抗压强度与弹性模量之间存在很好的指数关系。     

冻融损伤对再生混凝土耐久性及与钢筋粘结性能分析

制作掺入引气剂和未掺入引气剂的100%粗骨料取代率的再生混凝土RC1和RC2两组试件以及掺入引气剂和未掺入引气剂的普通混凝土NC1和NC2两组试件,并分别对经过不同次数冻融循环试件的抗压强度、质量损失率、动弹性模量损失率进行研究。结果表明,冻融后各组试件的抗压强度、质量损失率及动弹性模量损失率均降低,对于添加引气剂的NC1和RC1两组试件损失较小,其中RC1组试件在200次冻融后抗压强度损失接近40%,质量损失率达0.5%,动弹性模量损失率38.5%。100%取代率并加入引气剂的ZRC组试件冻融后进行中心拨出实验,发生劈裂破坏和钢筋拔出破坏2种形式。再生粗骨料混凝土与钢筋的极限粘结应力均随冻融次数的增加而降低,200次冻融后极限粘结应力下降33.5,荷载滑移曲线既有上升段也有下降段。     

Study on Mechanical Properties of High-Performance Concrete

In this paper the high-performance concretes with 56-day compressive strengths of 60 to 100 MPa (with or without silica fume) have been studied experimentally in order to develop information about the mechanical properties of high-performance concrete. Results and discussions are presented regarding compressive strength gain with time,effect of drying. A linear equation of static modulus of elasticity has been derived.The static modulus of elasticity and Poisson's ratio are calculated by regression with testing data of 20 specimens.     

THE EFFECT OF THE BOND STRENGTH BETWEEN LAYERS ON COMPRESSIVE MECHANICAL PROPERTIES OF THE COMPOSITE ROCK

In this paper, on the basis of the compressive tests of composte rock, the different kinds of mechanical properties of composite rock under different bond states are discussed. Authers found that all mechanical properties of composite rock relate to the bond strength between layers and are dilferent when the layers'' bond strength is changed. With increasing the bond strength between layers of the composite rock, the limiting strength, elastic modulus, and breaking energy increase, and this phenomenon is to be stability gradually when they reach some volue, with increasing the layers'' bond strength, the poson ratio reduces.     

GFRP肋式剪力连接件受力性能对比试验研究

剪力连接件是保证GFRP混凝土组合梁/板中两种不同材料共同工作的重要构造,设计了矩形肋和T形肋两类GFRP肋式剪力连接件,进行了3组共8个GFRP肋式剪力连接件的推出试验,包括：矩形肋开孔、T形肋开孔、T形肋不开孔3组GFRP肋式剪力连接件,得到了其破坏形态、极限承载力、荷载滑移曲线及荷载应变变化规律,重点研究肋内开孔及肋的截面形式对GFRP肋式剪力连接件受力性能的影响。试验结果表明：GFRP肋式剪力连接件的破坏形态均为混凝土劈裂破坏;对比矩形肋开孔试件,T形肋开孔试件强度高、延性好;对比T形肋不开孔试件,T形肋开孔试件强度与延性均能提高。基于试验结果,建立了考虑肋内开孔及肋截面形式影响的GFRP肋式剪力连接件极限承载力计算公式,拟合得到了GFRP肋式剪力连接件的荷载滑移曲线上升段的理论模型,建立了其抗剪刚度计算公式。     

Quasi -static Mechanical Properties of SFRC under Uni -axial Compression

Using WAW-2000 a multifunction servo-controlled testing machine,uniaxial quasi-static compression experiments for the steel fiber reinforced concrete(SFRC) were conducted with three strain rates.The volume fraction(V_f)of SFRC ranged from 0% to 3%,and the matrix was C50 concrete.The whole stress-strain curves of matrix and SFRC were obtained,and the results showed that with the increase of V_f,the compressive strength increased slowly,while the toughness increase quickly.With the increase of the strain rate,the strength of SFRC increased,but the toughness decreased,and the more the Vf,the less decreasing of the toughness.The results also showed that the elastic modulus and Poisson's ratio of SFRC were not sensitive material parameters,and with the increase of V_f,the former raised slightly and the latter decreased a little,respectively.A well suited numerical expression of the compressive stress-strain curve applicable to SFRC was put forward.     

Finite Element Analysis of Shear Behavior of Super High Strength Reinforced Concrete Beam

On the basis of testing results of shear behavior from 18 super high strength reinforced concrete restrained beams with web reinforcement, with the cube compressive strength ranging from over 100Mpa, in this paper, the nonlinear finite element analysis procedure was formulated and the analysis of the specimen tests was carried out with the parameters obtained from the experiments and improved constitutive model and failure criteria of materials. Based on the simulated shear resistance test results and practical measured data of eighteen super high strength concrete restrained beams under point load, the equation to compute the shear resistance capacity of such beams was thus obtained by regression. The analytical results agree well with those of experiments.     

Mechanical Properties of Concrete Cylinders Confined with CFRP Sheets Subjected to Axial Compression

Based on Drucker-Prager criterion with non-associated flow rule, numerical analysis of mechanical properties of concrete cylinders were carried out by using non-linear finite element method. The effect caused by various parameters such as wrap thickness, fiber orientation and concrete strength on axial mechanical properties of concrete cylinders is discussed. The results show that the results calculated by non-associated flow rule conform to that in the test. It is demonstrated that there is significant enhancement both in compressive strength and ductility of cylinders with the increase of wrap thickness. Moreover, the gain in axial compressive strength is observed to be higher for lower strength concrete and be highest in the cylinders wrapped with the hoop orientation.     

Performance Comparison of High Strength Concrete Prepared with Metakoalin and Silica Fume

This paper makes a comparison of high strength concrete prepared with Metakoalin and that prepared with silica fume in terms of their workability, compressive strength , shrinkage and resistance to sulphate attack. The research results indicate that high strength concrete prepared with Metakoalin is better than that prepared with silica fume in terms of workability. When the water to binder ratio is high, concrete prepared with Metakoalin has a greater compressive strength than that prepared with silica fume. In contrast, when the ratio is low, it is the concrete prepared with silica fuma has a higher strenth. Concrete prepared with Metakoalin has a smaller auto -shrinkage and dry-shrinkage than that prepared with silica fume. And concrete prepared with Metakoalin will be just as good as concrete prepared with silica fume in terms of resistance to sulphate attack. It is indicated by the research that Metakoalin has same high activity as silica fume in the preparation of high strength concrete.     

Research on Stability Criterion of Concrete Feature in Different Stress Stage with Lyapunov Exponent

According to the research on whole curves of strain-stress of concrete materials,this paper finds there was an evident features of stages,and the discrete feature of curve is often in strain-softening stage.After data series of test being detected by dynamics of chaos,it presents that system of whole process of strain-stress evolutes from ordered steady state to low chaos state even high chaos state,system after compressive strength which curve of strain-stress is more linear one by one changes from strong ordered steady state to low chaos state;and joint system of concrete before compressive strength normally generates weak chaos state,with increase of uniaxial compressive strength of concrete materials specimens.The LE1 is proposed to be the stability criterion of concrete features in different stress stages,and the LE1 is regarded as the representative value of the system stability degree.The calculation of example shows that the stability criterion defined by the proposed method is consistent with the actual situation.     

冻融环境下钢筋与粉煤灰混凝土的粘结性能

通过对内贴应变片钢筋的直接拔出试验,分析冻融作用下粉煤灰掺量对钢筋与粉煤灰混凝土间粘结性能的影响,得出冻融循环作用对钢筋与粉煤灰混凝土之间粘结性能的影响规律。试验结果表明：钢筋与粉煤灰混凝土的粘结强度随粉煤灰掺量的增加而降低;当粉煤灰掺量一定时,随着冻融循环次数的增加,混凝土强度有所下降,钢筋与粉煤灰混凝土间极限粘结强度降低;当粉煤灰掺量较大,达到40%时,随冻融次数的增加,钢筋粉煤灰混凝土试件极限粘结强度的下降幅度明显减缓,极限粘结强度对应的滑移量增大。表明掺入较多粉煤灰可使试件的冻融损伤现象得到缓解,冻融环境下钢筋混凝土的粘结性能得到提高。     

Computational Model and Influencing Factor Analysis of Reinforced Concrete Walls under Fire

The finite element software ABAQUS is used to calculate the deformation of reinforced concrete walls under fire. The calculated results agree well with previous experimental results. Based on the finite element model, the influences of such parameters as axial load level, lateral load level, height-to-thickness ratio, wall thickness, concrete compressive strength, steel reinforcement yield strength, steel reinforcement ratio and concrete protection thickness on deformation and fire resistance of walls are analyzed systematically. It is found that, under the conditions of big axial load level or wall thickness without lateral load and small height-to-thickness ratio, the reverse deflection of reinforced concrete walls in fire is apt to occur. Within the work range of parameters in common use, the fire resistance of walls decreases with the increase of axial load level, lateral load level, height-to-thickness ratio, steel reinforcement yield strength or steel reinforcement ratio, and increases with the increase of wall thickness or concrete compressive strength.     

ANALYTICAL SOLUTION OF RING SHELL LINING WITH ANNULARLY VERTICAL WALLS MADE CONTACT WITH SURROUNDING ROCK

In this paper,the ring shell lining with annularly verticalwalls made contact with the surrounding rock is considered as a combinationstructure formed of ring shell,inner and outer annular barrels on elastic fo-undation.The complex equation and its solutions of ring shell under deadload of lining and vertical and horizontal surrounding rock pressures are de-rived by the method of complex function.The governing equation and itssolution of the barrels on elastic foundation are also derived by theory ofcylindrical shell.And then,the ring shell lining is assembled by the subst-ructures by means of compatibility conditions of internal forces and defor-mations between them.In the paper,all formulas for the practical computa-tion in engineering are derived,the numerical examples are given and theeffects of the parameters of the lining on the work behaviours of lining alsoare discussed preliminarily     

不同黑杨无性系及树干高度木材顺纹抗压强度研究

为探明黑杨无性系间及个体木材顺纹抗压强度的变异情况,进一步拓宽黑杨木材开发利用途径,笔者对15年生的5个黑杨无性系的生长性状以及木材顺纹抗压强度进行测定分析。结果表明：不同黑杨无性系间木材顺纹抗压强度存在极显著差异,无性系内不同树干高度木材顺纹抗压强度差异显著。供试各无性系木材顺纹抗压强度均达到41 MPa 以上,无性系83 的木材顺纹抗压强度最大,为48.44 MPa;无性系69 的木材顺纹抗压强度最小,为41.06 MPa。各无性系木材顺纹压力强度沿树干高度变化基本一致,都是随着树干高度的增加木材顺纹抗压强度呈逐渐增加的趋势,但无性系内木材顺纹抗压强度在不同树干高度上的变异差异显著。黑杨无性系木材顺纹抗压强度与胸径呈负相关,与树高呈正相关,但均未达到显著水平;与单株材积基本不相关,相关系数仅为0.106。     

Determination Analysis of Content of Aggregate Micro Fines of Middle and Low Compressive Strength Manufactured Fine Aggregate Concrete

There are some controversies on influences of stone powder on performances of concrete, and its content determination is one of the hot issues of manufactured fine aggregate (MFA) concrete. Slump and compressive strength of limestone MFA concrete were analyzed on contents of stone powder for middle-low strength and different flowability concrete. The experiment results show that there are different optimums percent of stone powder of MFA, such as 5, 10, and 20 for different types of concrete, but the water-powder ratio for them is 0.4. It is concluded that optimum percent of stone powder may be predicted by water-powder 0.4 for middle and low strength MFA concrete.     

The Relationship of Strength,Pore Structure andAutoclaving Schedule of Lime_Sand Concrete

The influences of autoclaving schedule on the compressive strength,bending strength,spliting strength and fracture energy are studied by testing the strengths,fracture energy,pore structure and BET surface of lime_sand concrete with 2 kinds of mix proportion and 8 autoclave schedules.The purpose of the work is to explain the changes of mechanical behaviors of lime_sand concrete by the data of pore structure and BET surface.     

Research on Deformation Equation and Dynamic Properties of Hybrid Structure

Based on the principle of interactive analysis,the deformation equation of hybrid structure which contains rigid character value is established using the analysis of the frame - shear wall structure for reference, considering the rigid zone between concrete beam and concrete - tube, the shear deformation of concrete - tube, axial deformation of steel frames and semi - rigid connection between steel columns and concrete beams. Assuming the hybrid structure to be a continuous elastic structure with infinite degree of freedom, a free vibration equation has been built and the formula for calculating free vibration period has been deduced. The influences of various parameters to the coefficient of free vibration period relating to rigid character value are discussed according to some diagrams. It is shown that the rigid zone can lessen the free vibration period but the shear deformation of concrete - tube, axial deformation of steel frames, and the semi -rigid connection between steel columns and concrete beams can enhance the free vibration period.     

BEHAVIOR OF THE REINFORCED CONCRETE FRAME CORNER JOINTS SUBJECTED TO CLOSING LOADS

In this paper, experimental results on the tests of 15 full-scale reinforces concrete frame corner joints subjected to closing loads arereported. The primary variables are the compressive strength of eoncrete, thesteel ratio and the ratius of main bar bend. In order to investigate the stressdistributiens of the concrete in the cores of the joints, a nonlinear finiteelement analysis of the frame corner jonts is carried out. Possible damage andfailure modes of the frame corner joints are discussed herein. Based on observedand computed results, the formulae in terms of the steel ratio and the ratius ofmain bar bend and the corresponding useful recommendations are made for thedesign of the frame corner joints.     

A Time-effect Model for Concrete Compressive Strength under Sustained Load

Based on the existed stress-strain curve of concrete prism under one-off short-term load and the concrete creep model, a new time-effect model for evaluation of concrete compressive strength is established through the synthesis of the concrete creep attenuating effect under sustained load and the concrete strength enhancing effect by age, a corresponding computer program has been developed. The computation of related indices and their change rules of several different-grade concrete materials with the program was carried out and the results were compared with experimental data and finite element numerical results reported in the literature, the reasonableness and practicality of the proposed new model have been verified.     

Closed-form Analytical Solution for Beam on Elastic Foundation with Different Tension and Compression Modulus

On the basis of the theory of different modulus, the closed-form analytical solution for beams on elastic foundations with different modulus has been derived. A comparison is made between the results of the analytical solution and those calculated from the classic mechanic theories, in which the tension modulus are equal to the compression modulus. It is shown from the numerical results that the ratio of compressive modulus to tensile modulus will greatly affect the elastic characteristic values,internal forces and flexibilities. The present theory satisfies the mechanical behavior of materials. The amount of materials can be economized through rational design by using the elastic theory of different modulus.