ACQ木材防腐剂中有效成分铜的快速检测方法研究

文章采用EDTA络合滴定法对ACQ木材防腐药剂中有效成分铜含量进行测试研究,同时用原子吸收光谱法对样品进行同步检测分析。结果表明,采用EDTA滴定法测定ACQ防腐剂中铜含量,检测结果重复性好,准确度、精密度高,且操作简便,是一种非常适合于ACQ木材防腐剂生产中质量监控的快速检测方法。     

木材保护领域7项标准通过专审

为加强对防腐木材质量的检验和监督,规范防腐木材市场,2008年9月,中国木材标准化技术委员会在北京进行了6项国家标准和1项行业标准的审定。《木材防腐剂》规定了水载型木材防腐剂的有效成分配比,适用于木材防腐剂的生产及使用。《防腐木材的使用分类和要求》根据木材及其制品在     

木材防腐标准框架探讨

对我国重要的木材防腐标准进行了简要概述,并提出了国内标准框架草案,包括木材防腐剂及其分析方法、防腐处理材及木制品、木材防腐剂的抗虫抗菌评价方法、防腐木材的使用分类及防腐处理质量要求、产品标识等。     

环保防腐剂处理木材的耐腐性能研究

以马尾松为研究对象,分别采用铜唑和季铵铜(ACQ)两种环保型防腐剂处理木材,研究不同防腐剂对木材耐腐性能的影响。结果表明:两种防腐剂处理的木材耐腐等级为强耐腐,防腐效果显著;铜唑防腐剂浓度和成本较低,可推广应用于古建筑及传统民居木构件防护工程。     

反相高效液相色谱法测定木材防腐剂中戊唑醇含量

鉴于戊唑醇优异的杀菌功效,目前已逐渐被引入木材防腐行业.然而,时于木材防腐剂中戊唑醇的检测,尚处于研究阶段.本试验采用反相高效液相色谱法,样品回收率可达97.7%.该方法简单、有效,可用于对木材防腐剂中戊唑醇的定量分析.     

水载型木材防腐剂中有效成分固着的影响因素

水载型木材防腐剂在木材防腐市场中占据着主导地位,然而其中的有效成分的抗水流失性差是其存在的主要缺点,这在很大程度上是由于防腐处理材在使用前防腐剂有效成分与木材成分之间的固着反应不充分而造成的,因此提高防腐有效成分在处理材中的固着质量是提高抗流失性的关键.笔者对国内外在水载型防腐剂中有效成分固着方面的研究进行了较为系统、全面的介绍,其中包括木材树种、固着的环境温度与相对湿度、固着时间、木材含水率、防腐剂的保持量、防腐剂成分组成等不同因素的影响,并在此基础上提出了今后的研究方向.     

防腐木材在香蕉生产中应用的研究

用木材防腐剂CCA处理的防腐木材（蕉桩）在香蕉生产中进行应用试验,通过多年抽查使用情况,发现其耐腐性好,比不经过防腐处理的蕉桩使用期延长4倍,预计可达10年以上,从而减少木材消耗,降低香蕉生产成本;同时,多次提取使用防腐蕉桩的香蕉果实送广东省生态环境及土壤研究所测验,发现其有害金属元素的含量均不超过国家制定的绿色食物标准,故使用防腐木材对农作物均无毒副作用,安全性好。     

国外木材防腐技术和研究现状

从木材防腐剂、防腐处理工艺、改性处理及环境特性等几个方面对国外的木材防腐技术及研究现状进行较为系统、全面的介绍,并在此基础上指出木材防腐研究的几个主要方向.木材防腐剂的发展趋势是近期以水载防腐剂为主导,以开发综合性能优良的不含金属的有机防腐剂作为未来的发展方向;木材防腐处理工艺的重点在于增强防腐剂在木材中的渗透性,加速防腐剂与木材之间的固着反应以及开发新型的防腐处理工艺以适应新的防腐剂的需要.改性处理方面主要介绍木材的热处理和化学改性处理在防腐方面的应用现状.木材防腐处理的环境特性则着重介绍LCA技术(生命循环分析技术)以及防腐处理材的废弃处理问题.另外,还简要介绍木材防腐研究机构和协会、木材防腐标准等方面的情况.本文旨在使国内的木材研究者对当前木材防腐技术和研究有一个总体的认识,并在此基础上结合国内的实际情况,发展适于处理中国国内树种及适合市场需求的木材防腐技术,为更科学、更高效地利用国内木材资源提供新途径.     

木材防腐剂的登记及质量监督制度探讨

对国内木材防腐的状况、木材防腐剂对人的毒性及对环境的影响、木材防腐剂登记的重要性及措施、防腐材的质量监督制度、以及目前防腐产业面临的迫切问题进行了简要的概述并提出了建议.     

CCA 防腐剂在木材中的固着机理

加铬砷酸铜(CCA)作为木材防腐剂在世界范围内已经广泛使用了70余年,目前在我国其仍然是主要的木材防腐剂之一.然而.CCA 中有效成分铬和砷的氧化物所具有的剧毒性,使其在使用过程中流失到外界后会对环境及生物安全造成威胁,而防腐剂中有效成分的流失在很大程度上是由于防腐处理材在使用前防腐剂的有效成分与木材成分之间的固着反应不充分而造成的.对CCA中有效成分在处理材中的固着反应过程、监测方法及反应场所等做了详细介绍,旨在为水基木材防腐剂有效成分在处理材中的固着、流失研究提供借鉴,并为CCA防腐处理材的生产提供理论指导.     

Efficacy of wood preservatives formulated from okara with copper and/or boron salts

As a substitute for high-cost copper azole (CuAz) and alkaline copper quaternary (ACQ) wood preservatives, alternative wood preservatives were formulated with okara, which is an organic waste from the production of tofu, and copper chloride and/or borax. Each preservative was used in treatment of wood blocks in a reduced-pressure method to measure its treatability. The treated wood blocks were placed in hot water for 3 days to examine the stability of the preservatives against hot-water leaching. The preservatives successfully penetrated into wood blocks, probably due to the use of ammonium hydroxide as a dissociating agent. However, the stability of okara-based preservatives dropped as the concentration of acid in the solutions used for hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but were negatively affected by the addition of borax. Leached wood blocks treated with okara-based preservatives and exposed to decay fungi Gloeophyllum trabeum and Postia placenta over 12 weeks showed good decay resistance. Okara-based wood preservatives can protect wood against fungal attack as effectively as CuAz, and have potential for use as environmentally friendly wood preservatives.     

Biological effectiveness of didecyl dimethyl ammonium tetrafluoroborate (DBF) against basidiomycetes following preconditioning in soil bed tests

Evaluation of wood preservatives in soil-contact tests is becoming an important issue since detoxification of wood-protecting compounds by fungi and bacteria found in soil may decrease the resistance of treated wood. In this study, the decay resistance of wood treated with didecyl dimethyl ammonium tetrafluoroborate (DBF), a recently developed quaternary ammonia compound, was evaluated in both soil bed and laboratory decay resistance tests. Small specimens (5×10×100 mm³) of DBF-treated and untreated sugi sapwood were subjected to decay in laboratory soil bed tests (DIN ENV 807 (2001)) followed by Basidiomycetes tests (DIN EN 113 (1996)). Exposure in field soil and compost soil substrates was used to observe the effects of wood degrading and other soil-inhabiting micro-organisms on the decay resistance of the specimens. Soil bed tests showed that DBF-treated wood specimens at 7.7 kg/m³ retention level (1% DBF solution concentration) showed better performance compared to 0.01 and 0.1% DBF treatments. The 7.7 kg/m³ retention level was also effective to protect the wood specimens against Coniophora puteana and Coriolus versicolor in Basidiomycetes tests. It is concluded that detoxification of wood preservatives in soil contact is an important factor to determine protective properties of treated wood in ground contact applications. Further experiments with larger specimens are needed to observe the performance of DBF-treated wood at higher retention levels in field above ground and ground contact tests. Dedicated to Prof. Dr. H.C. Mult. Walter Liese on the occasion of his 80th birthday.     

木材防腐剂对软腐菌实验室快速毒性试验标准方法的研究

为制订防腐剂对软腐菌毒性试验标准，对软腐菌（球毛壳菌）在三种培养基上的生长情况进行了比较试验。结果表明，ＰＤＡ与英国标准８３８加葡萄糖两种培养基，对菌生长更好。再分别进行水溶性与油类防腐剂的流失、挥发前后对菌毒性试验。证明该方法只有快速、简便易行的特点。     

季铵盐类化合物(QAC)在木材防腐中的应用

主要综述了季铵盐类化合物(QAC)在用作木材防腐剂时的耐腐性、抗流失性及其与木材的结合机理等方面的研究概况,分析了实验室耐腐性和野外实验耐腐性结果不一致的原因。此外也介绍了对季铵盐进行改性处理方面的一些研究进展。     

Dielectric properties of copper-ethanolamine treated Chinese fir (Cunninghamia lanceolata Hook.)

In order to clarify the interaction between copper and wood substances in wood treated with copper containing water-borne wood preservatives, the dielectric constant ε′ and dielectric loss factor ε″ of untreated wood and wood treated with four concentration levels of copper-ethanolamine (Cu-EA) solutions were determined within a temperature range from –100 to 40°C and a frequency range from 100 to 1 MHz. Three dielectric relaxation processes were observed in the ε″ spectrum; among them R-I is based on the reorientation of methylol groups in the amorphous region of wood cell walls and R-II is related to wood extractives. R-III appeared in Cu-EA treated wood, and its magnitude decreases with the concentration of Cu-EA solutions used in this experiment. This relaxation process was considered to be based on the reorientation of copper-ethanolamine-wood complexes in wood cell walls. At low copper retention, the hydrogen in the complex can form hydrogen bonding with adjacent hydroxyl groups, which results in a strong bonding state between copper and wood; at high copper retention, the numerous copper-ethanolamine complexes not only hinder them from forming hydrogen bonding with adjacent wood molecules due to steric hindrance, but also weaken the interaction between wood molecules themselves, which corresponds to reducing ε″ values of both R-I and R-III processes. The results explain the fact of in-creasing copper leaching in wood treated with high concentration copper-based water-borne preservatives.     

Distribution of preservatives in thermally modified Scots pine and Norway spruce sapwood

Studying the impregnation and distribution of oil-based preservative in dried wood is complicated as wood is a nonhomogeneous, hygroscopic and porous material, and especially of anisotropic nature. However, this study is important since it has influence on the durability of wood. To enhance the durability of thermally modified wood, a new method for preservative impregnation is introduced, avoiding the need for external pressure or vacuum. This article presents a study on preservative distribution in thermally treated Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) sapwood using computed tomography scanning, light microscopy, and scanning electron microscopy. Secondary treatment of thermally modified wood was performed on a laboratory scale by impregnation with two types of preservatives, viz. Elit Träskydd (Beckers) and pine tar (tar), to evaluate their distribution in the wood cells. Preservative solutions were impregnated in the wood using a simple and effective method. Samples were preheated to 170 °C in a drying oven and immediately submerged in preservative solutions for simultaneous impregnation and cooling. Tar penetration was found higher than Beckers, and their distribution decreased with increasing sample length. Owing to some anatomical properties, uptake of preservatives was low in spruce. Besides, dry-induced interstitial spaces, which are proven important flow paths for seasoned wood, were not observed in this species.     

ACQ和CuAz防腐处理对木材力学性能的影响

采用水溶性铜防腐剂(ACQ)和铜唑类防腐剂(CuAz)加压浸注处理臭冷杉木材,研究了药液处理浓度和后期干燥条件对木材抗弯弹性模量和抗弯强度的影响。t检验表明,本试验条件下,经两种防腐剂处理后,木材的抗弯弹性模量保持不变或略微增加。通过分析与对照素材试件的t检验比较,表明两种防腐剂处理前、后木材的抗弯弹性模量差异不显著。ACQ和CuAz防腐处理对木材抗弯强度有一定影响,ACQ处理使得木材抗弯强度整体上略有下降,而CuAz处理由于保持量相对较低,对木材抗弯强度未见明显下降趋势。后期干燥方式对木材抗弯强度亦未见明显规律性的影响。     

Detection of the effective refractive index of thermally modified Scots pine by immersion liquid method

The purpose of this study was to determine the effective refractive index of thermally modified Scots pine (Pinus sylvestris L.) wood specimens as a quantitative measure regarding the change of wood density which is due to the thermal modification. The refractive index of thermally modified Scots pine wood was obtained by introducing pine wood powder into an immersion liquid and measuring light backscattering with a homebuilt multifunction spectrophotometer. The present method provides useful information that in principle can be applied, for example, in the optimization of the thermal modification process and inspection of the quality of thermally modified wood.