Nereistoxin and cartap neurotoxicity attributable to direct block of the insect nicotinic receptor/channel

Nereistoxin (NTX) (4-dimethylamino-1,2-dithiolane) is the naturally occurring prototype for cartap [the bis(thiocarbamate) derivative of the NTX dithiol], which is generally regarded as a proinsecticide reverting to NTX. The aim of this study is to define the target site(s) for dithiolanes and dithiol esters. The affinity of [(3)H]NTX was not suitable for binding assays with honeybee (Apis mellifera) head membranes. However, NTX and cartap are equally potent, direct-acting, and competitive displacers of [(3)H]thienylcyclohexylpiperidine binding at the noncompetitive blocker (NCB) site of the Apis nicotinic acetylcholine receptor (nAChR)/channel. NTX also binds at the Apis [(3)H]imidacloprid agonist site, but cartap does not. As candidate metabolic pathways, sequential N-desmethylation and S-oxidation of NTX progressively reduce its potency at the NCB site and toxicity to houseflies. A P450 inhibitor reduces the toxicity of NTX and enhances it with cartap. Surprisingly, cartap is not just a pro-NTX but instead directly induces inhibitory neurotoxicity by blocking the nAChR/channel, whereas NTX may have dual NCB and agonist targets.     

Kinetics and mechanism of imazosulfuron hydrolysis

Knowledge of the kinetics and pathways of hydrolytic degradation is crucial to the prediction of the fate and transport mechanism of chemicals. This work first describes the kinetics of the chemical hydrolysis of imazosulfuron, a new sulfonylurea herbicide, and evaluates the results to propose a degradation pathway. The hydrolysis of imazosulfuron has been studied in aqueous buffers both within the pH range 1.9-12.3 at ambient temperature (thermostated at 25 +/- 2 degrees C) and at pH 3.6 within the temperature range of 15-55 degrees C. The hydrolysis rate of imazosulfuron was characterized by a first-order kinetics, pH- and temperature-dependent, and accelerated by acidic conditions and higher temperatures. The calculated half-lives at pH 4.5 and 5.9 were 36.5 and 578 days, respectively. At pH 6.6, 7.4, 9.2, and 12.3 no significant change in imazosulfuron concentration was observed after 150 days. Half-lives were much lower at pH <4 (= imazosulfuron pK(a)), at which they ranged from 3.3 to 6.3 days. Moreover, a change in temperature from 15 to 25 degrees C in acidic conditions (pH 3.6) decreased the half-life of imazosulfuron by a factor of approximately 4.0; in any case, a 3-5-fold increase in the rate of hydrolysis was found for each 10 degrees C increase in temperature. In acidic conditions the only hydrolysis products were the two molecules resulting from the cleavage of the sulfonylurea bridge.     

Triflusulfuron-methyl dissipation in water and soil

This paper reports laboratory studies of the behavior and fate of triflusulfuron-methyl in aqueous buffer and soils. Aqueous hydrolysis was pH-dependent and fast in acidic buffer solutions. In basic buffers, the hydrolysis rate variation was low between pH 7 and pH 10. The degradation pathway in the range of pH 4-10 was via cleavage of the sulfonylurea bridge to form two transformation products: 2-amino-4-(dimethylamino)-6-(2,2,2-trifluoroethoxy)-1,3, 5-triazine (2) and 6-methyl-2-methylcarboxylate benzene sulfonamide (3). Comparison of transformation rates in sterile and nonsterile soils indicates that chemical and microbial processes are important in soil degradation. The former is more important in acidic soils, and the latter is more important in basic soils. A biphasic model fits well with dissipation of triflusulfuron-methyl in soil. The triazine formed during the first step of transformation was degraded more rapidly in basic soils than in acidic soils.     

Pseudoperoxidase activity of myoglobin: kinetics and mechanism of the peroxidase cycle of myoglobin with H2O2 and 2,2-azino-bis(3-ethylbenzthiazoline-6-sulfonate) as substrates

Using 2,2-azino-bis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) as substrate, it has been shown that the increased peroxidase activity for decreasing pH of myoglobin activated by hydrogen peroxide is due to a protonization of ferrylmyoglobin, MbFe(IV)=O, facilitating electron transfer from the substrate and corresponding to pK(a) approximately 5.2 at 25.0 degrees C and ionic strength 0.16, rather than due to specific acid catalysis. On the basis of stopped flow absorption spectroscopy with detection of the radical cation ABTS(.+), the second-order rate constant and activation parameters for the reaction between MbFe(IV)=O and ABTS were found to have the values k = 698 +/- 32 M(-1) s(-1), DeltaH# = 66 +/- 4 kJ mol(-1), and DeltaS# = 30 +/- 15 J mol(-1) K(-1) at 25.0 degrees C and physiological pH (7.4) and ionic strength (= 0.16 M NaCl). At a lower pH (5.8) corresponding to the conditions in meat, values were found as follows: k = 3.5 +/- 0.3 x 10(4) M(-1) s(-1), DeltaH# = 31 +/- 6 kJ mol(-1), and DeltaS# = -53 +/- 19 J mol(-1) K(-1), indicative of a shift from outersphere electron transfer to an innersphere mechanism. For steady state assay conditions, this shift is paralleled by a shift from saturation kinetics at pH 7.4 to first-order kinetics for H2O2 as substrate at pH 5.8. In contrast, the activation reaction between myoglobin and hydrogen peroxide was found at 25.0 degrees C to be slow and independent of pH with values of 171 +/- 7 and 196 +/- 19 M(-1) s(-1) found at physiological and meat pH, respectively, as determined by sequential stopped flow spectroscopy, from which a lower limit of k = 6 x 10(5) M(-1) s(-1) for the reaction between perferrylmyoglobin, .MbFe(IV)=O, and ABTS could be estimated. As compared to the traditional peroxidase assay, a better characterization of pseudoperoxidase activity of heme pigments and their denatured or proteolyzed forms is thus becoming possible, and specific kinetic effects on activation, substrate oxidation, or shift in rate determining steps may be detected.     

Hydrolytic products and kinetics of triazophos in buffered and alkaline solutions with different values of pH

The hydrolysis of triazophos was studied in buffered solutions in the range of pH 4-10 and in sodium hydroxide solutions with pH values up to 12. The results showed that the degradation of triazophos in the above solutions followed simple pseudo-first-order kinetics. At 35 degrees C, the rate constants in buffered solutions ranged from 0.0222 d(-1) at pH 4 to 0.5357 d(-1) at pH 10, and increased to 0.6251 h(-1) in 0.01 mol/L sodium hydroxide solution. The results also indicated that the base-catalysis was more important than acid-catalysis in the hydrolysis of triazophos. On the basis of the Arrhenius plot, the calculated activation energy (E(a)) and the frequency factor (A) for the hydrolysis of triazophos in buffered solution of pH 10 were 78.6 kJ/mol and 1.13 x 10(13) d(-1), respectively. Hydrolytic products of triazophos in buffered solutions of pH 4 and 10, as well as in sodium hydroxide solution of pH 11, were identified as their corresponding trimethylsilyl derivatives with a gas chromatography-mass spectrometer (GC-MS). The possible hydrolytic pathways of triazophos were also proposed.     

Kinetics of acid hydrolysis of water-soluble spruce O-acetyl galactoglucomannans

Water-soluble O-acetyl galactoglucomannan (GGM) is a softwood-derived polysaccharide, which can be extracted on an industrial scale from wood or mechanical pulping waters and now is available in kilogram scale for research and development of value-added products. To develop applications of GGM, information is needed on its stability in acidic conditions. The kinetics of acid hydrolysis of GGM was studied at temperatures up to 90 degrees C in the pH range of 1-3. Molar mass and molar mass distribution were determined using size exclusion chromatography with multiangle laser light scattering and refractive index detection. The molar mass of GGM decreased considerably with treatment time at temperatures above 70 degrees C and pH below 2. The molar mass distribution broadened with hydrolysis time. A first-order kinetic model was found to match the acid hydrolysis. The reaction rate constants at various pH values and temperatures were calculated on the basis of the first-order kinetic model. Furthermore, the activation energy, E, was obtained from the Arrhenius plot. The activation energy E was 150 kJ mol (-1) for acid hydrolysis of spruce GGM. The apparent rate constant during acid hydrolysis increased by a factor of 10 with a decrease in pH by 1 unit, regardless of temperature. In addition, gas chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were applied to study the released GGM monomers and oligomers.     

Kinetic study on the changes in the susceptibility of egg white proteins to enzymatic hydrolysis induced by heat and high hydrostatic pressure pretreatment

A kinetic study was conducted on the effect of heat pretreatment in the temperature range of 50-85 degrees C at atmospheric pressure and of high hydrostatic pressure pretreatment (100-700 MPa) at four temperatures (10, 25, 40, and 60 degrees C) on the susceptibility of egg white solutions (10% v/v, pH 7.6) to subsequent enzymatic hydrolysis by a mixture of trypsin and alpha-chymotrypsin at 37 degrees C and pH 8.0. Both heat pretreatment at atmospheric pressure and high-pressure pretreatment resulted in an increase in degree of hydrolysis (DH) after 10 min of enzymatic reaction (DH10) of egg white solutions, as measured using the pH-stat method, which could be described by a fractional conversion model (based on an apparent first-order reaction kinetic model). The temperature dependence of the corresponding rate constants could be described by the Arrhenius equation. At elevated pressure, a negative apparent activation energy was obtained, implying an antagonistic effect of pressure and temperature. The pressure dependence of the rate constants could be described by the Eyring equation, and negative activation volumes were observed, which demonstrates the positive effect of pressure on the susceptibility of egg white solutions to subsequent enzymatic hydrolysis.     

Nonenzymatic degradation of citrus pectin and pectate during prolonged heating: effects of pH, temperature, and degree of methyl esterification

The underlying mechanisms governing nonenzymatic pectin and pectate degradation during thermal treatment have not yet been fully elucidated. This study determined the extent of nonenzymatic degradation due to beta-elimination, acid hydrolysis, and demethylation during prolonged heating of citrus pectins and its influence on physicochemical properties. Solutions of citrus pectins, buffered from pH 4.0 to 8.5, were heated at 75, 85, 95, and 110 degrees C for 0-300 min. Evolution of methanol and formation of reducing groups and unsaturated uronides were monitored during heating. Molecular weight and viscosity changes were determined through size exclusion chromatography and capillary viscometry, respectively. Results showed that at pH 4.5, the activation energies of acid hydrolysis, beta-elimination, and demethylation are 95, 136, and 98 kJ/mol, respectively. This means that at this pH, acid hydrolysis occurs more rapidly than beta-elimination. Furthermore, the rate of acid hydrolysis is diminished by higher levels of methyl esterification. Also, citrus pectin (93% esterified) degrades primarily via beta-elimination even under acidic conditions. Acid hydrolysis and beta-elimination caused significant reduction in relative viscosity and molecular weight.     

Steady-state kinetics and thermodynamics of the hydrolysis of beta-lactoglobulin by trypsin

Hydrolysis of beta-lactoglobulin (in an equimolar mixture of the A and B variant) by trypsin in neutral aqueous solution [pH 7.7 at 25 degrees C, ionic strength 0.08 (NaCl)] was followed by capillary electrophoresis and thermodynamic parameters derived from a Michaelis-Menten analysis of rate data obtained at 10, 20, 30, and 40 degrees C for disappearance of beta-lactoglobulin. Enthalpy of substrate binding to the enzyme and the energy of activation for the catalytic process were found to have the values, DeltaH(bind) = -28 +/- 4 kJ mol(-)(1) and E(a) = 51 +/- 18 kJ mol(-)(1), respectively. Thus, beta-lactoglobulin shows an enthalpy of activation for free substrate reacting with free enzyme of about 21 kJ mol(-)(1), corresponding to a transition state stabilization of 60 kJ mol(-)(1) when compared to acid-catalyzed hydrolysis. The catalytic efficiency of trypsin in hydrolysis of beta-lactoglobulin is increased significantly by temperature; however, this effect is partly counteracted by a weaker substrate binding resulting in an increase by only 25%/10 degrees C in overall catalytic efficiency.     

Effects of copper source and concentration on in vitro phytate phosphorus hydrolysis by phytase

Five copper (Cu) sources were studied at pH 2.5, 5.5, and 6.5 to determine how Cu affects phytate phosphorus (PP) hydrolysis by phytase at concentrations up to 500 mg/kg diet (60 min, 40-41 degrees C). Subsequently, Cu solubility with and without sodium phytate was measured. Adding Cu inhibited PP hydrolysis at pH 5.5 and pH 6.5 (P < 0.05). This inhibition was greater with higher concentrations of Cu. Tri-basic copper chloride and copper lysinate inhibited PP hydrolysis much less than copper sulfate pentahydrate, copper chloride, and copper citrate (P < 0.05). A strong negative relationship was observed between PP hydrolysis and soluble Cu at pH 5.5 (r = -0.76, P < 0.0001) and 6.5 (r = -0.54, P < 0.0001). In conclusion, pH, Cu concentration, and source influenced PP hydrolysis by phytase in vitro and were related to the amount of soluble Cu and the formation of insoluble copper-phytin complexes.     

Kinetics of abiotic hydrolysis of isoxaflutole: influence of pH and temperature in aqueous mineral buffered solutions

A kinetic study of the chemical hydrolysis of isoxaflutole [5-cyclopropyl-4-(2-methanesulfonyl-4-trifluoromethylbenzoyl)is oxazol e (IFT)], a new herbicide recently developed by Rh?ne-Poulenc Agro, in buffered, sterile aqueous solutions was carried out in the dark at 295, 308, and 323 K and at nine pH values between 1.8 and 10.1. Samples were analyzed by HPLC-UV. The decrease in IFT concentration was accompanied by an increase in the concentration of its diketonitrile derivative (DKN). Obeying pseudo-first-order kinetics, isoxaflutole hydrolysis increased with increasing pH and temperature: for 295 K and pH 9.3 the rate of degradation was 100-fold faster than at pH 3.8. Using the Arrhenius equation, the rate constants K(obsd), activation energies E(a), and entropies DeltaS() were calculated, and plotting log(K(obsd)) against pH showed that the effect of pH varied with temperature. According to DeltaS() values the mechanism of the reaction was found to be different with respect to pH range. The benzoic acid derivative, known as a degradation product of DKN in plants, was not detected in the present study.     

Kinetics and mechanism of cymoxanil degradation in buffer solutions

The kinetics and mechanism(s) of the hydrolytic degradation of a compound are needed to evaluate a compound's abiotic degradation in the environment. In this paper, the hydrolysis of cymoxanil [2-cyano-N-[(ethylamino)carbonyl]-2-(methoxyimino) acetamide] was investigated in dark sterile aqueous solutions under a variety of pH conditions (pH 2.8-9.2) and temperatures (15-50 degrees C). Hydrolysis of cymoxanil was described by first-order kinetics, which was dependent on pH and temperature. Cymoxanil degraded rapidly at pH 9 (half-life = 31 min) and relatively slowly at pH 2.8 (half-life = 722 days). The effect of temperature on the rate of cymoxanil degradation was characterized using the Arrhenius equation with an estimated energy of activation of 117.1 kJ mol(-)(1). An increase in temperature of 10 degrees C resulted in a decrease in half-life by a factor of approximately 5. Three competing degradation pathways are proposed for the hydrolysis of cymoxanil, with two of the pathways accounting for approximately 90% of cymoxanil degradation. These two pathways involved either initial cyclization to 1-ethyldihydro-6-imino-2,3,5(3H)-pyrimidinetrione-5-(O-methyloxime) (1, Figure 1) or direct cleavage of the C-1 amide bond to form cyano(methoxyimino) acetic acid (7). The third pathway of degradation involved initial cyclization to 3-ethyl-4-(methoxyimino)-2,5-dioxo-4-imidazolidinecarbonitrile (8), which rapidly degrades into 1-ethyl-5-(methoxyimino)-2,4-imidazoline-2,4-dione (9). All three pathways eventually lead to the formation of the polar metabolite oxalic acid.     

Affinity and rate constants for interactions of bovine folate-binding protein and folate derivatives determined by optical biosensor technology. Effect of stereoselectivity

The interactions between bovine folate-binding protein (FBP) and different folate derivatives in pure diastereoisomeric forms were studied at pH 7.4 by a surface plasmon resonance technology (Biacore). The results show that folic acid had the most rapid association rate (k(a) = 1.0 x 10(6) M(-)(1) s(-)(1)), whereas (6S)-5-HCO-5,6,7,8-tetrahydrofolic acid had the most rapid dissociation rate (k(d) = 3.2 x l0(-)(3) s(-)(1)). The equilibrium dissociation constant (K(D)), calculated from the quotient of k(d)/k(a), showed that the two forms of folates not occurring in nature, that is, folic acid and (6R)-5-CH(3)-5,6,7,8-tetrahydrofolic acid, had the highest affinities for FBP, 20 and 160 pmol/L, respectively. The results thus show that there were great differences in the interactions between folate-binding protein and the major forms of folate derivatives. The nutritional implications of these differences are discussed.     

Spectrofluorometric characterization of beta-lactoglobulin B covalently labeled with 2-(4'-maleimidylanilino)naphthalene-6-sulfonate.

Bovine beta-lactoglobulin, genetic variant B, has been labeled with 2-(4'-maleimidylanilino)naphthalene-6-sulfonic acid through covalent attachment through the Cys-121 thiol group for the study of stepwise pressure denaturation of this whey protein by fluorescence spectroscopy. The labeling was performed under nondenaturing conditions with a factor of 5 excess of the fluorophore in dimethylformamide/water (1:10) to yield the whey protein highly labeled after chromatographic separation. MALDI-TOF mass spectroscopy confirmed labeling. The emission from the fluorophore, which is sensitive to the microenvironment, has been characterized for the labeled protein (aqueous pH 7.4 solution, 25 degrees C) and has a lambda(em,max) = 410 nm (lambda(ex,max) = 318 nm) with a fluorescence lifetime of 6.1 +/- 0.2 ns. Fluorescence anisotropy increases and fluorescence quantum yield (Phi(f) = 0.103 at 320 nm) decreases with increasing excitation wavelength. For increasing hydrostatic pressure, fluorescence quantum yield showed a minimum at approximately 50 MPa, corresponding to the pre-denatured "pressure-melted" state in which thiol reactivity previously was found to increase prior to reversible protein unfolding.     

Effects of pH on chemical stability and de-esterification of fenoxaprop-ethyl by purified enzymes, bacterial extracts, and soils

De-esterification is an initial step in the metabolism of certain herbicides, for example, fenoxaprop-ethyl [(+/-)-ethyl 2-[4-[(6-chloro-2-benzoxaolyl)oxy]phenoxy]propanoate] (FE). The ethyl-ester bond cleavage of FE to fenoxaprop acid (FA) by purified enzymes, crude bacterial enzyme preparations, and soils was investigated. In similar experiments fluorescein diacetate (FDA) was used as an alternative substrate. FE stability was pH sensitive in acidic buffered solutions; that is, below pH 4.6, rapid nonenzymatic hydrolysis of the benzoxazolyl-oxy-phenoxy ether linkage occurred, forming 6-chloro-2,3-dihydro-benzoxazol-2-one (CDHB) and ethyl 4-hydroxyphenoxypropanoate or 4-hydroxyphenoxypropanoate. With porcine esterase and cell-free Pseudomonas fluorescens extracts, activity on FE and FDA was most rapid at pH 7.6-8.6 but decreased 80-90% at pH 5.6. Yeast (Candida cylindrica) lipase-mediated de-esterification of FE and FDA was not as sensitive to pH; that is, activity at pH 4.6 was 70% of that at pH 7.6. Short-term incubations (20 h) were conducted in eight soils (pH 4.5-6.9) treated with (14)C-chlorophenyl ring-labeled FE (2 mg kg(-)(1)). In the most acidic soils (pH 4.4-4.5) 25% of the (14)C was recovered as FA, versus 30-40% in moderately acid soils (pH 5.0-5.6) and 55% in neutral soils (pH 6.8-6.9). There was a similar correlation between soil pH and FDA de-esterification. CDHB was formed in all acidic soils with levels 4-fold greater in pH 4.4-4.5 soils than in pH 5. 0-5.6 soils. CDHB was not formed in neutral soils. Results demonstrate some chemical hydrolysis (benzoxazolyl-oxy-phenoxy ether linkage) of FE in acid soils, the sensitivity of enzymatic de-esterification of FE to pH, and the potential of FDA as a colorimetric indicator for esterase hydrolysis of FE.     

Kinetics of hydrolysis of fructooligosaccharides in mineral-buffered aqueous solutions: influence of pH and temperature

High-performance anion exchange chromatography coupled with a pulsed amperometric detection system (HPAEC-PAD) was used to evaluate the extent of chemical hydrolysis of three fructooligosaccharides (FOS) including 1-kestose (beta-D-Fru-(2-->1)(2)-alpha-D-glucopyranoside, GF2), nystose (beta-D-Fru-(2-->1)(3)-alpha-D-glucopyranoside, GF3), and fructofuranosylnystose (beta-D-Fru-(2-->1)(4)-alpha-D-glucopyranoside, GF4). A kinetic study was carried out at 80, 90, 100, 110, and 120 degrees C in aqueous solutions buffered at pH values of 4.0, 7.0, and 9.0. Under each experimental condition, the determination of the respective amounts of reactants and hydrolysis products showed that FOS hydrolysis obeyed pseudo-first-order kinetics as the extent of hydrolysis, which decreased at increasing pH values, increased with temperature. The three oligomers were found to be degraded mainly under acidic conditions, and at the highest temperature value (120 degrees C), a quick and complete acid degradation of each FOS was observed. Using the Arrhenius equation, rate constants, half-life values, and activation energies were calculated and compared with those obtained from sucrose under the same experimental conditions. It appeared that the hydrolysis of FOS took place much more easily at acidic pH than at neutral or basic pH values.     

Furan-2,5-dimethylene-tethered bis-imidacloprid insecticide conferring high potency

Bis-imidacloprid (bis-IMI) analogues with suitable alkylene spacers have plant-systemic insecticidal properties. The alkylene-tethered bis-IMI binds in a unique mode to the insect nicotinic acetylcholine receptor (nAChR) wherein the chloropyridine moieties are embraced by two distinct and distant domains. The heptamethylene spacer optimally bridges these two subsites, yet the linker itself binds in a relatively nonspecific manner. This investigation examines the hypothesis that a bis-IMI analogue with a heteroaromatic tether, which undergoes specific interaction(s) with the newly recognized receptor cavity, may enhance the potency relative to those of the alkylene-tethered derivatives. Remarkably, a novel bis-IMI with a furan-2,5-dimethylene fulcrum showed highest receptor potency and insecticidal activity among the analogues with various chemotype spacers. The nAChR structural model, simulating the binding site interactions of the furan-2,5-dimethylene-tethered bis-IMI, reveals that the furan ring is nestled in a hydrophobic pocket, consisting of three aromatic amino acids, and is stabilized via hydrogen bonding.     

Physicochemical properties of native and recombinant mungbean (Vigna radiata L. Wilczek) 8S globulins and the effects of the N-linked glycans

We have previously cloned and characterized the cDNAs of three isoforms of the 8S globulin of mungbean, expressed the major 8Salpha isoform in Escherichia coli, and purified and successfully crystallized it (Bernardo, A. E. N.; Garcia, R. N.; Adachi, M.; Angeles, J. G. C.; Kaga, A; Ishimoto, M.; Utsumi, S.; Tecson-Mendoza, E. M. J. Agric. Food Chem. 2004, 52, 2552-2560). Herein, we report the physicochemical and emulsifying properties of the native 8S and recombinant 8Salpha globulin or vicilin. The circular dichroism spectra analysis of the native 8S and recombinant 8Salpha globulins revealed that the recombinant 8Salpha formed a secondary structure close to that of the native 8S. Further, gel filtration analysis showed that 8Salpha was able to assemble into trimers. The native 8S and recombinant 8Salpha globulins were soluble at pH 3.4 and at pH 7.4-9.0 at low ionic strength, mu = 0.08. Interestingly, the native 8S was more soluble at pH 7.0 and pH 7.4 than the recombinant 8Salpha at mu = 0.08. Both forms were very soluble at pH 3.4-9.0 at high ionic strength, mu = 0.50. The native form exhibited a higher T(m) (69.2, 79.5, and 83.8 degrees C) than the recombinant form (65.6, 71.6, 77.5 degrees C) at mu = 0.1, 0.2, and 0.5, respectively. The recombinant form was found to have greater surface hydrophobicity than the native form. There was little difference in the emulsifying ability between the native 8S and 8Salpha at pH 3.4 and pH 7.6. The results indicate that the presence of N-linked glycans is not essential in the assembly and stable conformation of the mungbean vicilin. However, the N-linked glycans might have contributed to the higher solubility at low ionic strength, greater thermal stability, and decreased surface hydrophobicity of the native vicilin as compared to the recombinant 8Salpha. On the other hand, the N-linked glycans showed little effect on the emulsifying ability of the protein.     

Degradation of malathion, in aqueous extracts of asparagus (Asparagus officinalis)

Malathion was incubated in water extracts of vegetables at various temperatures and pH, and the amount of malathion present over time was analyzed by a gas chromatograph with a flame photometric detector. Malathion was degraded to a nondetectable level in a 1% asparagus extract incubated at pH 7.4 and 37 degrees C for 4 h. Carrot extract showed the second highest rate of malathion degradation (76%), followed by kale extract (23.7%), spinach extract (9.7%), and broccoli extract (1.5%) under the same conditions. The highest degradation rates of malathion were observed at 37 degrees C, when three different temperatures were tested (5, 25, and 37 degrees C) at pH 7.4. Rate constants were 0.134 min(-)(1) from a 1% asparagus solution and 0.095 min(-)(1) from a 0.5% asparagus solution. The highest degradation rate of malathion was achieved at pH 9 among the pHs tested (pH 4, 7.4, and 9) in a 0.5% asparagus solution. The 0.5% asparagus solution degraded dicarboxylic acid esters by almost 100% for dimethyl succinate and diethyl adipate, by 64% for diethyl acetyl succinate, and 30% for diethyl benzyl malonate when incubated at pH 9 for 20 min. The results support the hypothesis that the enzyme that degrades malathion in the asparagus solutions is a carboxylesterase.     

Study on the hydrolysis of 2-chlorobenzamide

It is reported that 2-chlorobenzamide, one of the chief degradation products of CCU (1-(2-chlorobenzoyl)-3-(4-chlorophenyl) urea), a new insect growth regulator, is a potential carcinogen, but few studies about its environmental stability have been found. This paper is concerned with the hydrolysis of 2-chlorobenzamide as part of the environmental study of CCU. The results showed that 2-chlorobenzamide is relatively stable in solutions of pH = 6 and 8, for which the rate constants are 0.00286 h(-)(1) (R = 99.13%, SD = 0. 0095) and 0.00109 h(-)(1) (R = 96.70%, SD = 0.0072), respectively. Hydrolysis was more rapid in acidic (pH = 5), alkaline (pH = 10), and neutral (pH = 7) environments, with hydrolytic rate constants of 0.00417h(-)(1) (R = 95.76%, SD = 0.0390), 0.00411h(-)(1) (R = 99.89%, SD = 0.0162) and 0.00408h(-)(1) (R = 98.29%, SD = 0.0237), respectively. The change of the rate of hydrolysis with pH showed two minima at 25 degrees C. Temperature has some impact on the hydrolysis, showing at higher temperature the larger rate of reaction.