Biomechanical Comparison of Two Plating Techniques for Fixation of Acetabular Osteotomies in Dogs

OBJECTIVE: To compare the failure properties of a 5-hole, 2.7-mm curved acetabular plate (AP) to a 5-hole, 3.5-mm reconstruction plate (RP) when applied to acetabular osteotomies. STUDY DESIGN: Cadaver study. ANIMALS OR SAMPLE POPULATION: Pelves of 8 mature, large-breed dogs. METHODS: A 5-hole, 2.7-mm AP and a 5-hole, 3.5-mm RP were contoured and applied to the dorsal acetabulum of each pelvis. A central acetabular fracture was simulated after plate application by a transverse osteotomy with a fine saw. Each acetabulum was loaded in a weight-bearing direction. A load-deformation curve was produced for each construct, and biomechanical properties of the AP and RP were compared with the Student's paired t-test. A P value of < .05 was considered significant. RESULTS: For the AP and RP composite respectively, the mean +/- SD maximum load to failure was 2,721 +/- 632 N and 2,488 +/- 800 N, the stiffness was 4.8 +/- 1.8 N/m and 5.3 +/- 1.9 N/m, and the energy absorbed was 15.1 +/- 5.2 Nm and 16.3 +/- 8.3 Nm. None of these differences was statistically significant. CONCLUSIONS: Both fixation techniques provided comparable strength, stiffness, and energy absorbed under the loading conditions of this study. CLINICAL RELEVANCE: Because of the relative ease of application, the 2.7-mm curved AP may be the practical choice for acetabular fracture repair in large dogs.     

A Biomechanical Comparison of Screw and Wire Fixation With and Without Polymethylmethacrylate Re-Enforcement for Acetabular Osteotomy Stabilization in Dogs

Objective— Compare the biomechanical characteristics of screw and wire fixation with and without polymethylmethacrylate (PMMA) re-enforcement for acetabular osteotomy stabilization in dogs. Animals— Pelves removed from 8 adult mixed breed dogs weighing between 25 and 30 kg. Procedure— The pubic symphysis of each pelvis was split and a central transverse acetabular osteotomy was performed. One hemipelvis from each dog was stabilized with the composite fixation (interfragmentary Kirschner wire, two screws and a figure-of-eight orthopedic wire with PMMA). The contralateral hemipelves was stabilized with an interfragmentary Kirschner wire, two screws, and a figure-of-eight orthopedic wire without PMMA. All hemipelves were tested in bending by using a materials testing machine at a cross head speed of 5 mm/min. An extensometer was placed on the dorsomedial surface of the hemipelves centered over acetabular osteotomy to record distraction of the osteotomy during loading. A load/deformation curve and a load/distraction curve was produced for each hemipelvis. The slope for the initial linear portion of the load/deformation curve and the load/distraction curve, yield load and maximum load sustained were compared between repair groups using a paired t-test with P < .05 considered significant. Results— The slope of the load/deformation curve was significantly greater (P= .001 ) for hemipelves stabilized with the composite fixation (mean ± SD: 69 ± 18 N/mm) compared with hemipelves stabilized without PMMA (mean ± SD: 39 ± 8 N/mm). There was no significant difference (P= .593 ) between repair groups in the slope of the load/distraction curves as measured on the extensometer. Yield load was significantly greater (P= .0002 ) for hemipelves stabilized with the composite fixation (mean ± SD: 184 ± 25 N) compared to hemipelves stabilized without PMMA (mean ± SD: 74 ± 12 N). Maximum load sustained was also significantly greater (P= .013 ) for hemipelves stabilized with the composite fixation (mean ± SD: 396 ± 71 N) compared to hemipelves stabilized without PMMA (mean ± SD: 265 ± 94 N). Failure of hemipelves stabilized with the composite fixation occurred primarily by ventrolateral bending of the cranial and caudal pelvic segments at the osteotomy site. Failure of hemipelves stabilized without PMMA occurred by ventrolateral bending of the cranial and caudal pelvic segments at the osteotomy site with pronounced concurrent ventrolateral rotation of the cranial pelvic segment. Conclusion— PMMA improves the mechanical characteristics of acetabular fracture fixation, at least in part by neutralization of rotational forces. The results of this study justify use of PMMA as a component of the composite fixation when repairing acetabular fractures.     

Ex Vivo Biomechanical Comparison of the 2.4 mm UniLOCK® Reconstruction Plate Using 2.4 mm Locking Versus Standard Screws for Fixation of Acetabular Osteotomy in Dogs

Objective— To compare the accuracy of reduction and the biomechanical characteristics of canine acetabular osteotomies stabilized with locking versus standard screws in a locking plate. Study Design— Ex vivo biomechanical study. Sample Population— Cadaveric canine hemipelves and corresponding femurs (n=10 paired). Methods— Transverse acetabular osteotomies stabilized with 5‐hole 2.4 mm uniLOCK^® reconstruction plates using either 2.4 mm locking monocortical or standard bicortical screw fixation (Synthes^® Maxillofacial). Fracture reduction was assessed directly (craniocaudal acetabular width measurements and gross observation) and indirectly (impression casts). All constructs were fatigue‐tested, followed by acute destructive testing. All outcome measures (mean±SD) were evaluated for significance (P<.05) using paired t‐tests. Results— Craniocaudal acetabular diameters before and after fixation were not significantly different (21.9±1.2 and 21.5±1.2 mm; P=.45). No significant differences were observed in acetabular width differences between pre‐ and postoperative fixation between groups (locking ?0.4±0.4 mm; standard ?0.4±0.3 mm; P=.76). Grossly, there was no significant difference in the repairs and impression casts did not reveal a significant (P=.75) difference in congruency between the groups. No significant differences were found in fracture gap between groups either dorsally (locking 0.38±0.23 mm versus standard 0.22±0.05 mm; P=.30) or ventrally (locking 0.80±0.79 mm versus standard 0.35±0.13 mm; P=.23), and maximum change in amplitude dorsally (locking 0.96±2.15 mm versus standard 0.92±0.89 mm; P=.96) or ventrally (locking 2.02±2.93 mm versus standard 0.15±0.81 mm; P=.25). There were no significant differences in stiffness (locking 241±46 N/mm versus standard 283±209 N/mm; P=.64) or load to failure (locking 1077±950 N versus standard 811±248 N; P=.49). Conclusion— No significant differences were found between pelves stabilized with locking monocortical screw fixation or standard bicortical screw fixation with respect to joint congruity, displacement of fracture gap after cyclic loading, construct stiffness, or ultimate load to failure. Clinical Relevance— There is no apparent advantage of locking plate fixation over standard plate fixation of 2‐piece ex vivo acetabular fractures using the 2.4 mm uniLOCK^® reconstruction plate.     

Clinical and Radiographic Evaluation of Intertrochanteric Osteotomy in Dogs: A Retrospective Study of 18 Dogs

Objective- To determine whether intertrochanteric osteotomy (ITO) can prevent the progression of degenerative joint disease (DJD) in dysplastic hip joints.
Study Design- The results of ITO were assessed retrospectively by using owner questionnaires, physical examination, and radiographic evaluation.
Animals- Eighteen client-owned dogs (29 coxofemoral joints were evaluated).
Methods- Lameness was scored according to a grading system. A scoring system was also developed to assess radiographically evident osteoarthritis on a ventrodorsal projection of the coxofemoral joints in extension.
Results- Twenty-nine ITO were performed in 18 dogs with varying degrees of hip dysplasia. The dogs were lame on 19 of 29 rear limbs on physical examination before surgery. In 22 of the 29 hip joints, palpation caused signs of pain. The median age at the first and second surgical procedure was 14.5 months and 18 months, respectively. Follow-up evaluation was performed on average at 9.77 (FU I), 22.52 (FU II), and 47.50 months (FU in) after surgery. Based on the owners' evaluation, there was a tendency toward improvement after surgery. The results of the physical examination at the preoperative examination and at the three follow-up examinations did not differ significantly. The follow-up radiographic scores showed significantly worse DJD than the preoperative scores.
Conclusions- ITO does not prevent progression of DJD in the dysplastic hip.
Clinical Relevance- Knowledge of the long-term effects of ITO is essential for surgeons trying to achieve improvement in dogs with hip dysplasia.     

Biomechanical Evaluation of Acetabular Cup Implantation in Cementless Total Hip Arthroplasty

Objective: To report biomechanical properties of the Biologic Fixation System (BFX) acetabular cup impacted into a normal canine pelvis and to compare the effect of implant positioned to and beyond the medial acetabular wall. Study Design: In vitro cadaveric study. Animals: Hemipelves of mature, large‐breed dogs (n=6). Methods: For each dog, 1 hemipelvis was reamed to the depth of the acetabular wall (group A) and 1 was reamed an additional 6 mm after penetration of the medial cortex of the acetabulum (group B). The hemipelves were implanted with acetabular cups and loaded in compression through a matching femoral prosthetic component until failure. Specimen stiffness, and failure displacement, load, and energy were determined from load and displacement data and results between groups compared with a paired t‐test. Results: Mean failure load was greater in group A (3812 ± 391 N) than group B (2924 ± 316 N; P<.014). No other differences (P>.05) were observed between groups. Bone fracture (n=5) and cup displacement (1) occurred in group A whereas in group B there were 3 fractures and 3 cup displacements. Conclusions: Although medial placement of the BFX cup affected compressive failure loads, failure loads for both groups exceeded normal physiologic loads. Clinical Relevance: Medial positioning of the acetabular cup does not appear to compromise acetabular implant‐pelvic stability under normal physiologic loads. Because arthroplasty candidates often have abnormal acetabular architecture, mechanical properties of the cup placed in acetabula without a dorsal rim should be investigated.     

Effect of Osteotomy of the Greater Trochanter with Tension Band Fixation on Femorai Conformation in Beagle Dogs

Osteotomy of the greater trochanter with tension band fixation was performed on 14-, 20-, and 26-week-old Beagle dogs. Physeal growth of the greater trochanter was retarded, as determined by tetracycline labeling. The trochanteric-condylar distance was reduced and the articulotrochanteric distance was increased. There was no shortening of femoral leg length. There were mild increases in the length of the femora and tibiae of the experimental hindlimbs. The angles of inclination and anteversion of the femoral neck were measured. The experimental operations resulted in insignificant changes in these angles. There was no histologic or clinical evidence of coxarthropathy. All dogs were clinically normal at the termination of the study (38 weeks). It was concluded that osteotomy of the greater trochanter with tension band fixation could be performed on growing Beagle dogs without producing adverse effects.     

Results of Screw/Wire/Polymethylmethacrylate Composite Fixation for Acetabular Fracture Repair in 14 Dogs

Objective- To assess the clinical results in dogs with acetabular fractures stabilized using a screw-wire-polymethylmethacrylate (SWP) composite fixation.
Study Design- A retrospective study of client-owned dogs with acetabular fractures.
Animals- Fourteen dogs ranging in age from 4 to 95 months (mean, 34 ±25 months; median, 25 months) and body weight from 8 to 39 kg (mean, 25 ±6 kg; median, 27 kg).
Methods- Medical records and radiographs were retrospectively evaluated to determine location of the fracture, presence of preexisting degenerative joint disease, accuracy of fracture reduction and complications associated with surgery. Long-term results were evaluated by subjective assessment of lameness, elicitation of pain and/or crepitus on manipulation of the coxofemoral joint, measurements of pelvic limb circumference, coxofemoral joint goniometric measurements, and radiographic evaluation.
Results- Fracture reduction was considered anatomic in 13 dogs. At the time of the last follow-up evaluation (mean, 347 ±261 days; median, 380 days) 10 dogs were sound on the affected limb, three dogs had a subtle weight-bearing lameness of the affected limb, and the remaining dog had a consistent non-weight-bearing lameness of the affected limb. Mild (n = 10) or moderate (n = 1) degenerative changes of the affected coxofemoral joint attributed to the acetabular fracture and its repair were noted on the follow-up radiographs in 11 dogs. Limb circumference of the affected limb ranged from -8.2% to +10.8% (mean, -0.8 ±4.2%; median, -0.7%) of the contralateral limb.
Conclusions- The SWP composite fixation consistently maintained anatomic reduction, was associated with few complications, and yielded satisfactory clinical results.
Clinical Relevance- The SWP composite fixation technique would seem to be an acceptable means of stabilizing acetabular fractures in dogs.     

Echocardiographic Assessment of Hemodynamic Changes Produced by Two Methods of Inducing Fluid Deficit in Dogs

Background: Hydration status is important to the cardiovascular system because of its effects on preload. Decreased preload can alter echocardiographic measurements of systolic and diastolic function, potentially confounding interpretation of results. Hypothesis/Objectives: Mild fluid deficits are associated with measurable echocardiographic changes that are validated by physical and biochemical markers of decreased intravascular volume. Animals: Twenty‐five healthy staff/student‐owned dogs with no evidence of cardiac or renal disease. Methods: Prospective, interventional laboratory study. Dogs were randomly assigned to water deprivation (WD) alone for 8 hours (n = 13) or to furosemide treatment (FTx, 2.5 mg/kg IV) followed by WD for 8 hours (n = 12). Echocardiograms, biochemical sampling, and physical parameters were measured at baseline, and after 4 and 8 hours. Results: Both protocols induced fluid deficit as indicated by significant (P < .00001) decreases in weight at 4 hours (WD, 1.1%; FTx, 3.7%) and 8 hours (WD, 2.7%; FTx, 4.5%). Furosemide significantly decreased left ventricular end‐diastolic volume (54.3 ± 19.3–42.1 ± 17.3 mL, P < .0001), cardiac index (4.2 ± 1.1–2.9 ± 0.9 L/min/M², P < .0001), and mitral valve E wave velocity (0.79 ± 0.2–0.66 ± 0.2 m/s, P= .0004). These changes were accompanied by significant increases in blood urea nitrogen concentration (13.8 ± 2.6–14.8 ± 2.7 mg/dL, P= .04), vasopressin concentration (1.4 ± 1.2–3.3 ± 1.9 pg/mL, P= .045), and PCV (49.8 ± 4.5–53.2 ± 6.5%, P= .006). Effects of water deprivation alone were similar, but less pronounced. Conclusions and Clinical Importance: Mild fluid deficits have measurable hemodynamic effects in dogs. Hydration status should be considered when evaluating cardiac function by echocardiogram.     

Biomechanical and Histological Evaluation of a Laparoscopic Stapled Gastropexy Technique in Dogs

The biomechanical holding strength and histological characteristics of a laparoscopic stapled gastropexy (LG) adhesion were compared with that of an incisional gastropexy (IG) adhesion. An LG was performed in 14 dogs and an IG was performed in six dogs. During the LG procedure, the abdomen was insufflated with carbon dioxide and three cannulae were placed in the caudal aspect of the right side of the abdomen. A 35 mm laparoscopic stapler was used to staple the gastric antrum to the adjacent right lateral abdominal wall. The IG procedure was performed through a ventral midline celiotomy. A 35 mm IG was made by apposing the gastric antrum to the adjacent right lateral abdominal wall with two continuous rows of suture. Half of each group of dogs was euthanatized at 7 and 30 days after surgery. The mean tensile load to failure at 7 days was 44.86 ± 18.54 N for the LG group and 85.33 ± 23.59 N for the IG group ( P <.05). At 30 days the values were 72.93 ± 18.01 N for the LG group and 71.17 ± 12.11 N for the IG group ( P =.41). The gastropexy adhesions in the 7-day postoperative group contained variable amounts of fibrin, hemorrhage, mononuclear cell inflammation, loose fibrovascular tissue, and mature collagenous connective tissue. Adhesions in the 7-day postoperative group were divided subjectively into three histological subgroups based on the relative amounts of mature connective tissue within the adhesion. The LG and IG adhesions were randomly distributed among these subgroups ( P = 1.0). Adhesions in the 30-day postoperative group contained well-organized fibrous connective tissue. No difference in the amount of connective tissue could be detected histologically in the LG or IG adhesions. Complications with the LG procedure included stomach perforation (2 cases), splenic puncture (2 cases), and subcutaneous emphysema (4 cases).     

An In Vitro Biomechanical Comparison of Two Fixation Methods for Transverse Osteotomies of the Medial Proximal Forelimb Sesamoid Bones in Horses

OBJECTIVE: This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS). STUDY DESIGN: An in vitro, paired study using equine cadaver limbs mounted in a loading apparatus was used to test the mechanical properties of TW and LS. ANIMAL OR SAMPLE POPULATION: Seventeen paired (13 repaired, 4 normal) equine cadaver limbs consisting of the suspensory apparatus third metacarpal bone, and first and second phalanges. METHOD: The two methods of repair and normal intact specimens were evaluated in single cycle-to-failure loading. Yield failure was defined to occur at the first notable discontinuity (>50 N) in the load-displacement curve, the first visible failure as evident on the videotape, or a change in the slope of the moment-fetlock angle curve. Ultimate failure was defined to occur at the highest load resisted by the specimen. Corresponding resultant force and force per kg of body weight on the suspensory apparatus, fetlock joint moment, and angle of fetlock dorsiflexion were calculated by use of specimen dimensions and applied load. These were compared along with specimen stiffness, and ram displacement. RESULTS: Load on the suspensory apparatus, load on the suspensory apparatus per kg of body weight, moment, applied load, and angle of fetlock dorsiflexion at yield failure were significantly greater for the TW-repaired than for the LS-repaired specimens. A 3 to 5 mm gap was observed before yield failure in most TW-repaired osteotomies. CONCLUSIONS: Transfixation wiring provided greater strength to yield failure than screws placed in lag fashion in single cycle load-to-failure mechanical testing of repaired transverse osteotomized specimens of the medial proximal forelimb sesamoid bone.     

犬幽门成形的两种术式及手术效果观察

为了对犬幽门成形的两种术式及手术效果进行观察,选择3月龄～5月龄、6 kg～10 kg体重的4只本地家犬,将其分为A、B两组,分别采用“Y-U皮瓣”法和“一字成形”法实施幽门成形术,术后观察实验犬的精神、食欲、饮欲、排便等情况,并于术后1个月进行剖检,观察幽门部形状及切口愈合情况.结果显示,术后实验犬的精神、食欲、饮欲、排便等情况基本正常,两种术式对犬幽门的扩张效果均为可靠,采用“Y-U皮瓣”法的A组犬幽门部外形平整,黏膜愈合光滑;采用“一字成形”法的B组犬幽门部外形不平整,1只犬术部内壁发生溃疡.结果表明,采用“Y-U皮瓣”法实施幽门成形术十分安全,效果良好.     

Periosteum and the Healing of Partial Ulnar Osteotomy in Radius Curvus of Dogs

A 2 cm partial ulnectomy was performed in twelve 4-month-old mongrel dogs with experimentally induced radius curvus. In four dogs, the periosteum was left intact; in four dogs, all of the periosteum was excised from the ulnectomy site; and in the remaining four dogs, the periosteum was sewn over the ends of the ostectomized bone. The unoperated limbs of all 12 dogs served as controls. Progress was determined monthly from radiographs until the dogs were 9 months of age. The ulnectomies performed when the periosteum was left in situ at the ulnectomy site healed quickly, resulting in progressive deformity of the foreleg. When the periosteum was excised or sewn over the ends of the bone, the ulnectomy sites did not heal and correction of the radius curvus resulted. Histopathologic examination confirmed the absence of bony healing.     

Mechanical Evaluation of Two Canine Iliac Fracture Fixation SysteMS

Twenty-three canine pelves were tested bilaterally to determine the stiffness and strength of intact ilium and stabilized oblique iliac osteotomies that simulated a common clinical fracture. Fixation systems tested were three 4.0 mm cancellous screws inserted ventral to dorsal across the osteotomy site and one laterally placed five hole 3.5 mm dynamic compression plate. Specimens were mechanically tested to failure under torsional, axial, or axial plus bending loads. Lag screw fixation was stiffer and stronger than plate fixation in all testing modes. The differences were statistically significant (p less than .05) in the torsional and axial plus bending loading modes. Fatigue testing was performed on implanted specimens with low-level cyclic loading under axial plus bending loading conditions. Physiologic loading conditions failed to produce mechanical failure of either fixation system after 100,000 cycles.