A MP3 Player Solution Based On Universal Microchip

This paper introduces a MP3 player solution based on universal microchip, Intel 8 bit microchip. It downloads music by USB interface and stores files into compact flash card. This paper specifies the usb interface technology between microchip and computer, interface design between microchip and compact flash card, and the control method of STA013 ,a mp3 decoding chip. The discrete audio signal is transformed into the continual audio signal by D/A transformer CS4334. Because of using a universal microchip, this system can also be embeded into other microcontrol system to achieve an apparatus with MP3 player.     

Development of Data Acquisition and Processing System Based on DSP and USB 2.0

The data acquisition and processing system are proceeding towards faster, more powerful, easier to use and more cost effectiveness. This paper discuss the design of the high speed and convenient data acquisition and processing system based on DSP and USB 2.0, and expatiates the principle and method of the virtual instruments system in detail. The system employs an ADS8346 to sample the six channel signals simultaneously with a resolution of 16-bit.It utilizes EZ-USB FX2 as the USB2.0 interface, which can achieve the high speed communication between the host and the system. It uses TMS320VC33 (dsp) as the core chip, which can accomplish the function of the main control and real-time digital signal processing. The system enhances the virtual instruments' advantage more by the combination between software and hardware.     

ECG Signal Acquisition Instrument Based on USB 2.0

An electrocardiogram (ECG) is an essential way for diagnosing the heart disease, and the test theories and systems work well with the practice application, whereas, as new technologies and devices come forth one after another, it allow us to acquire the ECG data more conveniently, more accurately, more comprehensively. The authors discuss the design of ECG data acquisition system based on the USB 2.0 protocol, and expatiates the system principle in detail. The system employs two AD73360 to sample the standard 12-lead signal simultaneously, which has a resolution of 16-bit. They utilize EZ-USB FX-2 as the USB interface device, which can transfer the data conveniently and quickly, and also permit the configuration of multi-system controlled by just one host. Considering the DSP as a powerful tool in the field of digital signal processing, ADSP-2181 has been chosen.     

Design and Implementation of Fingerprint Identification Module Based on DSP Chip

An automatic fingerprint identification module based on the fixed DSP chip TMS320VC5410 and the fingerprint sensor FPS200 is presented. The program of fingerprint identification algorithm mixes the assemble language and C, which implements a high effective and low cost embedded system. The software and hardware design and implementation of this system are introduced later. In experiments, the module is fast speed and accurate, and takes a very good performance.     

Design of a Motion Control System of Confocal Scanning Laser Microscope

A confocal scanning laser microscope is presented. Its motion control system is built with the DSP - based motion controller. The system worked on a double CPU structure that includes industrial control computer and motion controller, the system adopt friendly man - machine interface In the design of software. The systems tasks are divided into real - time tasks and no - real - time tasks. The lower computer deals with the real - time tasks such as position control and velocity control and the upper computer is used to deal with the non - real - time tasks. The system structure of con-focal scanning laser microscope and the constitute of motion control system as well as the software is introduced .     

Realization of high speed transmission system of ICT based on USB 2.0

Aiming at solving the problems existing in the traditional data transmission system of Industrial Computerized Tomography (ICT), which usually uses PCI and ISA bus, resulting in high price, poor scalability, low transmission rate, complex fixing and complex routing, and cannot fulfill the demand for research and production, a set of ICT based USB 2.0 high speed data transmission system model is proposed. The system takes a FPGA chip as core logic control module, which controls communications with the USB chipset. The whole hardware designation is described in terms of the performance of reliable data transmission, high speed and stability. Experimental results show that the proposed method improves the system’〖KG*8〗s stability and reliability. It can satisfy the requirements of ICT transmission .     

Application of DSP/BIOS to Video-tracking Process

This thesis mainly introduces a certain kind of real kernel based on TMS320 DSP- DSP/BIOS. There is an expatiation of the DSP/BIOS startup sequence and the design of a video - tracking system based on the characteristic of DSP/BIOS structure. The system is designed and analyzed by the UML technique. By means of scheduling and communicating between one task and another, managing and sending message and managing the muhithread by time-slicer in the process of video-tracking, the video-tracking system can be achieved reasonably. It is proved that the system work stably , the design and the resource are assigned aright and reasonably when the system satisfy the condition of real-time in practice.     

The modeling and simulation of a new USBCAN bus converter in Stateflow

The USBCAN bus converter is a connector of USB bus and CAN bus.It is difficult to judge whether the device works well or not and meets design requirement or not by ordinary ways.Regarded the Matlab/Simulink/Stateflow toolbox as the platform,the model of a USBCAN bus converter is established.The model of the bus converter is tested and verified in the Matlab/Simulink simulation environment.The results of the simulation analysis show the model is suitable for simulating the working state of the device.A new simulation and judging method for bus converters is proposed.     

Mouse with Capablility of Fingerprint Identifying

The mouse is developed with the purpose of providing reinforcement of database security for computer users, whose validity can be verified by taking advantage of the fingerprint identity, which is the uniqueness, immutability biological characteristic of human body. By one-by-one matching algorithm, rendering between pressured data and field acquisitions of finger print image, the vital heart of dactylogram verification with the mouse is realized. The mouse has been made possible by taking account of the roomy space within mouse,tiny chip patch for fingerprint identification and together with small size of available microprocessors. The mouse can be used as an normal pointing device while maintaining the capability of user identity distinguishing. The usage of this device is very easy and it is reliable. Development of this device mainly comprises of the hardware development, driver development, application software development, and the installation of network security verification center. The purpose, principle and system design of the mouse is introduced, while characteristics and applications of the device are also presented.     

Angular Acceleration Measurement System and Its USB Data Acquisition

The angular acceleration of a rotary shaft is one of the most important parameters for revolution which is widely employed in practical applications. The principles and approaches for measuring angular mechanism, acceleration were studied to find a feasible way to obtain the accurate and successive value of angular acceleration. A new type of data acquisition device with USB module was developed based on microcontroller AT09S8515 and USB interface controlling IC PDIUSBD12. It was convenient to test the width of rotary speed signal by using the unique function of the microcon-troller for automatically capturing the rising or falling edge of a square wave.     

Development of CMOS Digital Image Sensor

The CMOS image sensor has developed from passive pixel sensors and active pixel sensors to digital pixel sensors(DPS),which is the trend of image sensors.The advantage of DPS is that the imaging system can be integrated on a chip as imaging system-on-a-chip,decreasing the cost and power consumption,improving the imaging quality.The A/D conversion is the key component of the CMOS sensor.The authors analyze and compare the theories,performances and features of the chip level,column level and pixel level integrated ADC of the image sensor.They present the present and the future trend of the development about digital image sensor in the home and abroad.     

Embedded System and Its Typical Developing Pattern

In the era of "post-PC", embedded system is regarded as a new representation. And its characteristics and developing technology are focused. The traits of embedded system, which are low power processor, compact operating system, prolifically peripheral interfaces and form, and its inner modularized framework are parsed. The typical developing pattern of embedded system is put forward,which is called Host-Target pattern . This pattern can make developers have clear design train of thoughts and divide the work, and also make the developing synchronously. And cross-compile and remote debug is the typical developing characteristics of Host-Target pattern. They are both discussed in this article. Finally we prospect the future of embedded system, and the network, system on chip (SOC) and lower cost of embedded systems are regard as its tendency by author.     

Audio blind watermarking scheme combined DWT DCT QR

In order to protect the copyright of digital audio and video in Internet, we propose a novel audio blind watermarking scheme combined discrete wavelets transform, discrete cosine transform, QR decomposition and audio characteristics. In this algorithm, the audio are split into blocks, and each block are decomposed on two dimensional discrete wavelet transform (DWT), then the approximate sub band coefficients are decomposed on discrete cosine transform (DCT), and the first quarter of the DCT coefficients are decomposed on QR decomposition and get a triangle matrix. At last, the watermarking information is embedded into the triangle matrix. The experiments show that the algorithm can get better balance between transparency and robustness of watermark, and it has strong robustness against the common audio signal processing such as additive white Gaussian noise, re sampling, re quantization, low pass filter, MP3 compression and cutting replacement.     

Method of Measuring Rotational Speed for a High-speed Rotator Dynamic-balancing Testing System Based on DSP

The device of testing rotational speed is very important to dynamic-balancing testing system.Requirements for the device of testing rotational speed include: high-accuracy,stabilization,credibility,and shorter testing time.To the development of high-speed rotor dynamic-balancing testing system based on DSP(digital signal processing),the way of picking-up rotator reference signal,testing rotator speed based on DSP and the design of software are introduced.This new way of testing rotational speed in high-speed rotor dynamic-balancing testing system based on DSP is accurate,simple,convenient,the range of rotational speed which can test is broad,and the new way is very suitable to pick-up the amplitude and phase of vibration caused by unbalanced amount.     

Application of IEEE1394 Communication Technique in Car-engine Real-time Imitating

A design scheme using IEEE1394 serial interface to achieve communication between PC computer and DSP controller is introduced, which is used in real-time imitating for car-engine integrated controlling system. First, the rule of high speed IEEE1394 serial communication using TSB41BA3/TSB12LV01B interface is discussed. Further, the design scheme of software and hardware of communication sub-system is probed. The application effect is good in the car-engine integrated controlling system developed.     

Video Monitor and Control System of Tunnel Based on DSP/BIOS

A video Monitor &Control system of tunnel based on DSP/BIOS is proposed,which is different from traditional video Monitor & Control system.It uses DSP to process image,and uses enhanced video input processor to qcquire image.This system satisfies all requirements of video supervision,and is a low cost system.It has a good application foreground.The system has been confirmed as a good veracity and practicability system through testing in the Zhongliang Mountain tunnel of Chongqing.     

Design of the distributed wireless monitoring system

For the limitations of the traditional monitoring systems under the circumstances of dispersed monitoring points, wide distribution range and the harsh environment, a distributed wireless monitoring system based on radio frequency technique is designed. The system adopts the ultra low power consumption MCU MSP430 as the main control chip and extends several processing module in the periphery. In addition, the multi channel transceiver nRF905 is used for wireless data transmission. The software and hardware design scheme of the proposed system and the communication protocol for distributed data transmission are discussed. Frequency hopping mechanisms are employed to increase the reliability of data transmission. The results show that the proposed system has the characteristics such as flexible use and excellent mobility, while can monitor multipoint data in special environment in real time.     

A coordinated state transition control strategy for microgrid with multi-energy generation systems

A coordinated control strategy is proposed based on state transition for a microgrid containing continuous or intermittent DG, energy storage device and sensitive loads. According to the available operation states, a scheme of operation state transition is established through setting the current operation state and trigger event as inputs of MGCC and regarding the control modes of components as outputs. By considering the no deviation control for frequency and the capacity limitation of energy storage device under all operation states, control modes of components and trigger events of state transition under all defined states are designed respectively for a reliable power supply of sensitive load. The PSCAD/EMTDC simulation software is used for analysis of the three typical transition processes of operation states. The results show that the proposed coordinated control strategy is effective for a safe and reliable power supply to the sensitive loads and ensures a smoothing transition between operation states of microgrid as well as the no deviation control of system frequency.     

Development of Technology of DSP Based Mechanical Vibration Data Real-time Ethernet Transmission

In accordance with the requirements of industrial mechanical vibration field data real-time transmission in the condition of multi-survey-point and mass data acquisition, an Ethernet data transmission method based on Ethernet controller RTL8019AS and TMS320C5402 DSP is presented. Packing data from A/D into UDP and IP package and controlling RTL8019AS through I/O mapped registers, high-speed DSP makes real-time communication high performance. Ethernet frame protocol and TCP/IP protocol are simplified for the specific purpose. And the interface technology between Ethernet controller RTL8019AS and DSP is solved. The system evaluation and debugging are made.     

Application of Dot-matrix LCD in Speech Terminal

Dot-matrix LCD makes a feature of low power dissipation,small volume,and displaying more information,also widely used in automatic instrument.To provide more better user interface, dot-matrix LCD is used as a displayer.The interface circuit for dot-matrix LCD with MCS-51 singlechip microcomputer and the design of software corresponding are described in detail.Meanings of sixteen signal wires of a port is explained.the initial program of LCD is given,and the principle of Chinese charater and menu display is introduced. The hardware design of speech terminal is simple with a LCD module,while the user interface is more beautiful with the technology of chinese character and menu display. The adjustment of LCD contrast is discussed,and the solution is given.