Phenolic Content and Antioxidant Activity of Pearled Wheat and Roller‐Milled Fractions

Wheat contains phenolic compounds concentrated mainly in bran tissues. This study examined the distribution of phenolics and antioxidant activities in wheat fractions derived from pearling and roller milling. Debranning (pearling) of wheat before milling is becoming increasingly accepted by the milling industry as a means of improving wheat rollermilling performance, making it of interest to determine the concentration of ferulic acid at various degrees of pearling. Eight cultivar samples were used, including five genotypes representing four commercial Canadian wheat classes with different intrinsic qualities. Wheat was pearled incrementally to obtain five fractions, each representing an amount of product equivalent to 5% of initial sample weight. Wheat was also roller milled without debranning. Total phenolic content of fractions was determined using the modified Folin‐Ciocalteau method for all pearling fractions, and for bran, shorts, bran flour, and first middlings flour from roller milling. Antioxidant activity was determined on phenolic extracts by a method involving the use of the free radical 2,2‐diphenyl‐l‐picrylhydrazyl (DPPH). Total phenolics were concentrated in fractions from the first and second pearlings (>4,000 mg/kg). Wheat fractions from the third and fourth pearlings still contained high phenolic content (>3,000 mg/kg). A similar trend was observed in antioxidant activity of the milled fractions with ≈4,000 mg/kg in bran and shorts, ≈3,000 mg/kg in bran flour, and <1,000 mg/kg in first middlings flour. Total phenolic content and antioxidant activity were highly correlated (R² = 0.94). There were no significant differences between red and white wheat samples. A strong influence of environment (growing location) was indicated. Pearling represents an effective technique to obtain wheat bran fractions enriched in phenolics and antioxidants, thereby maximizing health benefits associated with wheat‐based products.     

Relationship Between Protein Characteristics and Instant Noodle Making Quality of Wheat Flour

We investigated the relationship between the protein content and quality of wheat flours and characteristics of noodle dough and instant noodles using 14 hard and soft wheat flours with various protein contents and three commercial flours for making noodles. Protein content of wheat flours exhibited negative relationships with the optimum water absorption of noodle dough and lightness (L*) of the instant noodle dough sheet. Protein quality, as determined by SDS sedimentation volume and proportion of alcohol‐ and salt‐soluble protein of flour, also influenced optimum water absorption and yellow‐blueness (b*) of the noodle dough sheet. Wheat flours with high protein content (>13.6%) produced instant noodles with lower fat absorption, higher L*, lower b*, and firmer and more elastic texture than wheat flours with low protein content (<12.2%). L* and free lipid content of instant noodles were >76.8 and <20.8% in hard wheat flours of high SDS sedimentation volume (>36 mL) and low proportion of salt‐soluble protein (<12.5%), and <75.7 and >21.5% in soft wheat flours with low SDS sedimentation volume (<35 mL) and a high proportion of salt‐soluble protein (>15.0%). L* of instant noodles positively correlated with SDS sedimentation volume and negatively correlated with proportion of alcohol‐ and salt‐soluble protein of flour. These protein quality parameters also exhibited a significant relationship with b* of instant noodles. SDS sedimentation volume and proportion of salt‐soluble protein of flours also exhibited a significant relationship with free lipid content of instant noodles (P < 0.01 and P < 0.001, respectively). Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with texture properties of cooked instant noodles.     

Phenolic Content,Antioxidant Activity,and Consumer Acceptability of Sorghum Cookies

Cookies were produced from different sorghum flours to determine their potential as vectors of antioxidants. Different sorghum cultivars and their flour extraction rates were evaluated for their effects on phenolic content and antioxidant activity of the cookies. Consumer acceptance of the sorghum cookies was compared with that of wheat flour cookies. For each sorghum cultivar, cookies of 100% extraction rate flours had two to three times more total phenolics compared with those of 70% extraction rate flours, while antioxidant activity was 22–90% higher. Cookies of the condensed tannin sorghum had two to five times more phenolics compared with those of condensed tannin‐free sorghum. Antioxidant activity was 145–227 μMol Trolox equivalents (TE)/g in cookies of condensed tannin sorghum compared with 10–102 μMol TE/g in those of condensed tannin‐free sorghum. The sorghum flours had slightly higher phenolic content and antioxidant activity values than their corresponding cookies. Cookies of the red tannin‐free sorghum flours (PAN 8564/8446) were equally liked as wheat flour cookies, except for texture. However, cookies of condensed tannin sorghum were least accepted compared with wheat flour cookies despite their high antioxidant activity.     

Phytochemical composition, anti-inflammatory, and antiproliferative activity of whole wheat flour

Whole wheat flour from five wheat cultivars was evaluated for phenolic, carotenoid, and tocopherol compositions as well as anti-inflammatory and antiproliferative activities against HT-29 cells. The total ferulic acid content ranged from 452 to 731 μg/g among the five cultivars and was primarily present in the insoluble-bound form. Lutein was the only carotenoid detected and ranged from 1.5 to 4.0 μg/g, and α-tocopherol levels ranged from 12 to 61 μg/g. Extracts of four cultivars demonstrated significant anti-inflammatory activity, measured as inhibition of interleukin-1β (IL-1β) mRNA expression; however, none of the extracts inhibited tumor necrosis factor-α (TNF-α) mRNA expression, a second indicator of anti-inflammatory activity. Proliferation of HT-29 adenocarcinoma cells was inhibited by extracts from all cultivars at the dose of 100 mg botanical equivalent/mL. The cultivar WestBred 936 had the greatest antiproliferative activity at lower concentrations (20 and 50 mg botanical equivalent/mL), had the greatest anti-inflammatory effect against IL-1β, and also had the highest levels of ferulic acid and α-tocopherol. This research shows that whole wheat flours of these five cultivars varied significantly in their contents of phenolics, carotenoids, and α-tocopherol as well as in their anti-inflammatory and antiproliferative potentials, suggesting the possibility that wheat varieties can be selected based on potential health benefits.     

Rheological and Pasting Properties of Buckwheat (Fagopyrum esculentum Möench) Flours With and Without Jet‐Cooking

Pasting, rheological, and water‐holding properties of buckwheat (Fagopyrum esculentum) flour obtained from whole achenes separated into three particle sizes, and three commercial flours (Fancy, Supreme, and Farinetta) were measured with or without jet‐cooking. Fancy had instantaneous paste viscosity (measured using RVA) after jet‐cooking that was not observed for Supreme or Farinetta, and paste viscosity was lower for the latter two flours. Supreme jet‐cooked flour exhibited higher peak viscosity than flour without jet‐cooking, and paste exhibited high shear‐thinning. Fancy exhibited strongest viscoelastic properties (measured using a rheometer). Jet‐cooking damaged buckwheat flour structure, thereby reducing viscoelasticity. Buckwheat flour pastes experienced shear‐thinning over a wide range of shear rates. Jet‐cooking greatly enhanced water‐holding capacity. Buckwheat flour particle size did not greatly influence paste viscosity. Study showed buckwheat flours have unique pasting and rheological characteristics that have different food applications, which could especially be useful for people with celiac disease as buckwheat is gluten‐free.     

Characteristics of Noodles and Bread Prepared from Double‐Null Partial Waxy Wheat

Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour.     

Effect of Pea Flours with Different Particle Sizes on Antioxidant Activity in Pan Breads

Pulses are good sources of vitamins and minerals as well as antioxidants. Current literature supports a role for antioxidants in reducing oxidative damage associated with many health disorders, including cardiovascular disease and cancer. The effects of substitution of 10% (w/w) yellow whole or split pea flour (various particle sizes) in white wheat flour (Canadian Wheat Red Spring) on the phenolic and antioxidant activity of the leavened bread were examined. Antioxidant activity was evaluated with four assays, which included 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical scavenging, ferric reducing antioxidant power (FRAP), metal chelation (MC), and superoxide (SO) radical scavenging assays. The bread samples had reduced DPPH (5–11% scavenging activity) and MC (5–10% scavenging activity) values compared with their respective raw flours. Decreased activity in both the DPPH and MC assays can be attributed to a reduction in the antioxidant capacity in the bread samples owing to dilution with white wheat flour. The MC values for bread samples showed little variability between the yellow whole and split pea flours (8–10% scavenging activity for yellow whole and 9% for split pea flours), which suggests that the antioxidant activity of bread samples is not dramatically affected by the seed coats. Most pea fractions increased the FRAP scavenging activity and decreased the SO scavenging activity values for the bread samples compared with their respective raw flours. We conclude that thermal processing enhanced the antioxidant activity of the bread samples, limiting the dilution effect associated with flour addition during dough make‐up.     

Simple Phenolic Acids in Flours Prepared from Canadian Wheat: Relationship to Ash Content,Color, and Polyphenol Oxidase Activity

Simple phenolic acid levels were determined on pooled millstreams of five different classes of Canadian wheat milled to ~75, 80, and 85% extraction. Pooled flours and whole grain were analyzed by reversed-phase high-performance liquid chromatography (RP-HPLC) to establish endogenous levels of insoluble bound, soluble esterified, and free phenolic acids. Only ferulic acid was detected in the insoluble bound category, which accounted for >80% of the total phenolic acids present in every flour. The soluble esterified phenolic acids accounted for up to 17% of the overall total phenolic acid content within a flour. The major constituents were sinapic, ferulic, and vanillic acids, with minor amounts of coumaric, caffeic, and syringic acids. Free phenolic acids accounted for a maximum of 6% of the total phenolic content of any prepared flour. Ferulic acid was the major free phenolic acid, while sinapic acid was not detected in any flour. Significant correlations (r = 0.64–0.97, P < 0.05) were observed between insoluble bound ferulic acid, individual soluble esterified acids, and most free acids with polyphenol oxidase activity, as well as color and ash content for each class.     

Antioxidant contents and antioxidative properties of traditional rye breads

The purpose of this research was to find out the effect of flour extraction rate on the antioxidative properties of traditional rye bread and then to compare the bioactive compounds content and antioxidant properties of rye breads with commercial wheat roll. Four types of rye flour with different extraction rates of 100 (whole meal dark flour), 95 (brown flour), 90 (brown flour), and 70% (light flour) originated from Warko rye cultivar were used for traditional bread baking with sourdough fermentation. Four types of the respective rye breads were analyzed for their potentially beneficial components, including tocopherols and tocotrienols, total phenolics and flavonoids, reduced glutathione, and inositol hexaphosphates. Moreover, the phenolic acids profile was provided. The Trolox equivalent antioxidant capacity (TEAC) of the breads was evaluated using free radical scavenging activities of 80% methanol extracts against ABTS*+ radical cation (ABTS radical cation decolorization method) whereas radical scavenging activity (RSA) was determined against 2,2-diphenyl-1-picrylhydrazyl radical (DPPH*). The superoxide dismutase-like activity (SOD-like activity) was evaluated as free radical scavenging activities of PBS extracts against superoxide anion radicals (O2*-). The results were compared to whole meal rye bread as well as to wheat roll taken as representative example of wheat based bakery product. The studies showed that flour extraction rates strongly affected the content of bioactive compounds and antioxidative properties of traditionally baked rye breads. The incorporation of the rye flours with extraction rates from 100 down to 70% in the formulation caused decrease in tocopherol (T), tocotrienol (T3), inositol hexaphosphate (IP6), and phenolic compound (TPC) contents in rye breads. No changes in reduced glutathione (GSH) contents were noted between each type of rye bread. A significant decrease in Trolox equivalent antioxidant capacity and radical DDPH scavenging activity was also found in bread formulated on flour with an extraction rate of 70% in comparison to the breads formulated on flour with extraction rates from 100 to 90%. The highest SOD-like activity was noted for rye bread formulated on flour with an extraction rate of 70%. The four types of rye breads showed better antioxidative properties and higher antioxidant contents when compared to wheat roll with one exception made to tocopherols and tocotrienols.     

Phytochemical Profile and Antiproliferative Activity of Dough and Bread Fractions Made from Refined and Whole Wheat Flours

Phytochemical profile (phenolic acids, carotenoids, and tocopherols) and antiproliferative properties of bread processing fractions, including the dough, crumb, and upper crust made from refined wheat and whole wheat flours were analyzed for two wheat cultivars. Ferulic acid, lutein, and α‐tocopherol were the predominant phenolic acid, carotenoid, and tocopherol, respectively, extracted from all fractions. The levels of all phytochemicals in whole wheat samples were over eightfold higher than their corresponding refined wheat samples. The concentrations of total phenolic acids (soluble and insoluble bound) were higher in the upper crust of refined (∼60–90%) and whole wheat (∼15–40%) breads than their corresponding dough fractions. However, the dough of whole wheat had higher levels of tocopherols and carotenoids compared with the crumb and upper crust, suggesting that phenolic acids were relatively stable during baking, whereas tocopherols (∼25–80%) and carotenoids (∼20–80%), were partially degraded. The antiproliferative activity of whole wheat bread extracts against HT‐29 cancer cells was weakly correlated with total phenolic acids but showed no correlations with total carotenoid and total tocopherol contents.     

Antioxidant Capacity of Water‐Extractable Arabinoxylan from Commercial Barley,Wheat, and Wheat Fractions

The objective of this research was to analyze the antioxidant capacity directly of water‐extractable nonstarch polysaccharides (NSP) and feruloylated arabinoxylans (WEAX) following their characterization. NSP were isolated from barley, wheat, and wheat fractions (germ, bran, and aleurone). WEAX were extracted only from wheat fractions. Antioxidant capacity of NSP measured with the 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH), 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid (ABTS), and oxygen radical absorbance capacity (ORAC) assays was 24.0–99.0, 40.0–122.0, and 140.0–286.0μM Trolox equivalents (TE)/g, respectively. The antioxidant capacity of WEAX was 75.7–84.0, 58.0–105.0, and 110.0–235.0μM TE/g for those three assays. DPPH and ABTS were highly correlated to xylose content (R² = 0.85), degree of substitution (R² = −0.99), total phenolic acids (R² = >0.73), total phenolic content (TPC) (R² = >0.78), and ferulic acid content (R² = >0.86). ORAC was only influenced by TPC (R² = 0.63). By taking yield and antioxidant capacity into account, NSP would provide about 0.4–4.2, 0.6–5.1, and 2.8–12.0μM TE/g of flour of radical scavenging activity as measured by DPPH, ABTS, and ORAC, respectively, compared with WEAX (0.4–1.0, 0.3–1.3, and 0.6–2.8μM TE/g). Our results suggest that NSP or WEAX may play a role in protection against free radicals in a food matrix and likely in the gastrointestinal tract.     

Sequential Acid,Alkaline, and Enzymatic Modifications of Chickpea and Lentil Flours Impacted Batter Physical Properties

The effect of sequential acid, alkaline, and enzymatic treatment of chickpea and lentil flours on batter rheological properties was investigated. Substitution of wheat with disrupted chickpea and lentil flours significantly (P < 0.05) increased water‐holding capacity from 66.8% in wheat flour to more than 70.0% based on the disruption treatment, indicating an improved adhesion of coated batter. Flow behavior index of batter treatments of partially replaced wheat flour with various ratios of disrupted chickpea and lentil flours ranged from 0.88 to 1.36 and was significantly (P < 0.05) lower than the flour (i.e., 2.15) and nondisrupted control (i.e., 1.28–1.38 for chickpea and 1.22–1.28 for lentil) flours. Consistency coefficients of disrupted chickpea and lentil flours were significantly (P < 0.05) greater when replacing wheat control, indicating a best fit for the shear‐thickening model. Flour disruption decreased the treatment's pasting properties, except the setback, providing support for the significant role of proteins in dictating the pasting characteristics of batter flour treatments. Results of this study suggested a potential use for treated chickpea and lentil flours in enhancing batter rheological properties including adhesion and water‐holding capacity.     

Effect of Proofing Time and Wheat Flour Strength on Bleaching,Sensory Characteristics,and Volume of French Breads with Added Soybean Lipoxygenase

Soybean lipoxygenase addition in wheat bread doughs is widely used to improve the crumb color and rheology but little is known about the variability of the activity of lipoxygenase under diverse breadmaking conditions. Thus the objective of this study was to evaluate how soybean lipoxygenase can affect bleaching, volume, and sensory characteristics of French breads when proofing time and wheat flour strength varies. A 3-factor Box-Behnken design was used in this study containing one block and three independent variables or factors designated by exogenous lipoxygenase activity (x₁ = 0–71 unit/μg of protein), wheat flour deformation energy (x₂ = 231–258 × 10^–4 J), and proofing time (x₃ = 2–6 hr). Breads were randomly prepared and all assays were repeated three times. Specific volume (from 5.8 ± 0.4 to 9.9 ± 0.4 cm³/g), sensory quality (from 5.2 ± 0.8 to 8.3 ± 0.6), and yellow hue (from 12.6 ± 0.5 to 16.2 ± 0.3) significantly changed (P < 0.01) among the treatments. Specific volume of the breads increased with higher values of wheat flour strength and proofing time (ŷ_vs = 7.5 + 0.9 x₂ + 1.2 x₃ +0.5 x₂x₃). Sensory quality improved at higher values of wheat flour strength and shorter proofing time (ŷ_sq = 7.8 + 0.7 x₂ – 0.2 x₃ – 0.4 x₂² – 0.6x₃² + 0.5 x₂x₃), while lower and more desirable values of yellow hue were achieved at longer proofing time, higher activity of lipoxygenase, and using stronger wheat flours (ŷ_b = 13.7 – 1.2 x₁ – 0.5 x₂ – 0.2 x₃ + 1.0 x₁² – 0.3 x₁x₂). All regression models showed a good fitness to the experimental data (lack-of-fit P > 0.05) and the difference between predicted and observed values were also not significant (P < 0.05). Our results suggested that proofing time and wheat flour strength have a greater effect on volume and sensory quality of French breads than soybean lipoxygenase. However, the bleaching effect of this enzyme showed positive interaction with proofing time and wheat flour strength, suggesting its application even when strong wheat flours are used for the manufacture of French breads.     

Dehydrotriferulic and Dehydrodiferulic Acid Profiles of Cereal and Pseudocereal Flours

Dehydrooligomers of ferulic acid cross‐link polysaccharides such as arabinoxylans and pectic polysaccharides in cereal and certain pseudocereal grains, affecting physiological effects of these fiber components and their physicochemical properties during food processing. An HPLC‐MS method for the analysis of eight diferulic acids and five triferulic acids in low‐lignin samples such as cereal grains and pseudocereals was developed and validated. This method was applied to the analysis of ester‐linked diferulates and triferulates in maize, popcorn, wheat, rye, oats, barley, buckwheat, and amaranth, giving a complete profile of this set of diferulates and triferulates in cereals and pseudocereals. Triferulic acid contents of the cereal flours are roughly 1/10 of the diferulic acid contents, ranging between 23 (oats) and 161 (popcorn) μg/g of flour, with lower amounts for the pseudocereal flours (1–3 μg/g of flour). Dominating trimers are either the 5‐5/8‐O‐4‐ and/or the 8‐O‐4/8‐O‐4‐regioisomers with lower proportions of 8‐8cyclic/8‐O‐4‐, 8‐5noncyclic/8‐O‐4‐, and 8‐5noncyclic/5‐5‐triferulic acids. A unique diferulate pattern was found for buckwheat, with more than 90% of the dimers being 8‐5‐coupled. Amaranth contains an unusually high proportion of 8‐8cyclic‐diferulate, with 27% of the total dimers, whereas oats and barley show comparably high proportions (23%) of the 8‐8tetrahydrofuran diferulate.     

Frozen and Unfrozen Water Contents of Wheat Flours and Their Components

The properties of frozen and unfrozen water in two different wheat flours (hard and soft), and in their main components (gluten, starch, damaged starch, water‐soluble and water‐insoluble pentosans), were described using modulated differential scanning calorimetry (DSC). As a reference, enthalpy values of crystallization (298 J/g) and melting (335 J/g) of pure water were determined from the total heat flow curves. The separation of thermal events between the reversing and nonreversing heat flows with modulated DSC was not effective due to disturbances in the modulated temperature scan. For wheat flours and their components, linear regressions described well the changes in frozen water content calculated from enthalpies of freezing (R² = 0.970–0.982) or melting (R² = 0.783–0.996). The unfrozen water content (UFWC) calculated for the hard wheat flour (29–31%, db) was close to that calculated for the soft wheat flour (30–32%). The UFWC of wheat gluten (38–47%), starch (38–42%), damaged starch (37–40%), water‐soluble pentosans (51%), and water‐insoluble pentosans (40–44%) were higher than the corresponding values for the flours. The simple summation of the contributions of each component cannot be used to estimate the overall behavior of flours.     

Tocopherol and Tocotrienol Content in Commercial Wheat Mill Streams

The content of tocopherols and tocotrienols, collectively known as vitamin E (tocols), was determined in fractions of roller‐milled wheat grains. The results showed that vitamin E components are present in all major flour fractions of wheat, but that the vitamin E content and composition differed significantly between fractions. The total content of vitamin E, calculated as alpha‐tocopherol equivalents, changed from 16.1 mg α‐TE/g in wheat grain to 12.2 mg α‐TE/g in roller‐milled wheat flour. The germ fraction had the highest content of tocopherols, and the content of α‐tocopherol (195.2 μg/g) was 16 times higher (on average) than in any other fraction. The content of tocotrienols was distributed more uniform in the wheat grain with the highest content in the bran fractions, and the content of β‐tocotrienol was higher than the content of α‐tocopherol in all milling fractions except the wheat germ. The content of β‐tocotrienol was 24.1 μg/g in wheat grain, 25.3–31.0 μg/g in the bran fractions, and 14.3–21.9 μg/g in the fractions of endosperm. Overall, germ and fine bran fractions represent good sources of vitamin E and might be used in breadmaking.     

Solvent Retention Capacity Values in Relation to Hard Winter Wheat and Flour Properties and Straight‐Dough Breadmaking Quality

Solvent retention capacity (SRC) was investigated in assessing the end use quality of hard winter wheat (HWW). The four SRC values of 116 HWW flours were determined using 5% lactic acid, 50% sucrose, 5% sodium carbonate, and distilled water. The SRC values were greatly affected by wheat and flour protein contents, and showed significant linear correlations with 1,000‐kernel weight and single kernel weight, size, and hardness. The 5% lactic acid SRC value showed the highest correlation (r = 0.83, P < 0.0001) with straight‐dough bread volume, followed by 50% sucrose, and least by distilled water. We found that the 5% lactic acid SRC value differentiated the quality of protein relating to loaf volume. When we selected a set of flours that had a narrow range of protein content of 12–13% (n = 37) from the 116 flours, flour protein content was not significantly correlated with loaf volume. The 5% lactic acid SRC value, however, showed a significant correlation (r = 0.84, P < 0.0001) with loaf volume. The 5% lactic acid SRC value was significantly correlated with SDS‐sedimentation volume (r = 0.83, P < 0.0001). The SDS‐sedimentation test showed a similar capability to 5% lactic acid SRC, correlating significantly with loaf volume for flours with similar protein content (r = 0.72, P < 0.0001). Prediction models for loaf volume were derived from a series of wheat and flour quality parameters. The inclusion of 5% lactic acid SRC values in the prediction model improved R² = 0.778 and root mean square error (RMSE) of 57.2 from R² = 0.609 and RMSE = 75.6, respectively, from the prediction model developed with the single kernel characterization system (SKCS) and near‐infrared reflectance (NIR) spectroscopy data. The prediction models were tested with three validation sets with different protein ranges and confirmed that the 5% lactic acid SRC test is valuable in predicting the loaf volume of bread from a HWW flour, especially for flours with similar protein contents.     

Extrusion Processing of Rice‐Based Breakfast Cereals Enhanced with Tocopherol from a Chinese Medical Plant

Brown rice flour was mixed with a Chinese medical plant (Euryale ferox Salisb.) and processed to make ready‐to‐eat breakfast cereals using twin‐screw extrusion. Levels of 15 and 20% feed moisture in flour, and 200 and 250 rpm screw speed were set, and the physicochemical properties and content of α‐, β‐, γ‐, and δ‐tocopherols were determined. The data showed that 15% feed moisture gave a low bulk density and water absorption index but a high expansion ratio and water solubility index. High screw speed (250 rpm) produced a result similar to that of 15% feed moisture. A sample with 85% brown rice flour with 15% E. ferox Salisb. retained the highest content of α‐, β‐, γ‐, and δ‐tocopherols (125, 6, 78, and 9 μg/g), respectively. The optimum extrusion conditions determined were 15% E. ferox Salisb. mixed with brown rice at 15% feed moisture and at 250 rpm screw speed.     

Alkaline‐Carbonate Noodles from Hard Winter Wheat Flours Varying in Protein,Swelling Power,and Polyphenol Oxidase Activity

The effects of wheat protein and starch on yellow‐alkaline noodles have not been fully clarified. Twenty‐four hard winter wheats with varying protein, hot‐water swelling power (SP₉₅), and polyphenol oxidase (PPO) activity were milled into long‐patent and short‐patent flours. Protein, SP₉₅, and PPO activity in the 48 flours were 8.2–12.9%, 16.2–24.1 g/g, and 80–157 ΔA₄₈₀/mg of protein/min, respectively. Lightness of raw noodles declined with increasing protein and PPO levels but yellowness decreased and then increased. Tensile force to break the cooked noodles was positively correlated with SP₉₅ and protein. Compression (50%) force of noodles made from flour with high SP₉₅ ≈21 g/g, averaged ≈20% below those made from low SP₉₅ ≈17 g/g of flour. Compression force was measured in the long dimension of a single noodle strand using a rectangular probe. The instrumental measurements suggest that alkaline noodles made from a single‐null partial‐waxy wheat with medium SP₉₅ ≈19.9 g/g will have a tender bite and a cohesive texture compared with those from a low SP₉₅ wheat with a hard bite and fracturable texture. Furthermore, alkaline noodles from a double‐null partial‐waxy wheat with high SP₉₅ will have an extra soft bite unless flour protein is above ≈12.5%. Hard‐white, dual‐purpose wheat should have a low level of PPO and, depending on the preferred noodle‐eating texture, a low to medium SP₉₅ level. Such wheats with medium protein levels (11–12%) are well suited for alkaline noodles because of improved color and surface smoothness, whereas the same wheats with 12–13% protein are well suited for bread. Wheats with medium SP₉₅ also reduce cooking loss and increase cooked yield.     

Measuring Oxidative Gelation of Aqueous Flour Suspensions Using the Rapid Visco Analyzer

The Rapid Visco Analyzer (RVA) was investigated as a tool to measure oxidative gelation capacity (OGC) of aqueous wheat flour suspensions. One club wheat patent flour was used to determine optimal hydration time, and 33 straight‐grade flours (representing 12 hard and 21 soft varieties) were used to observe varietal differences in OGC. A 33.3% w/w flour–water suspension was tested in the RVA at 30°C and 160 rpm for 1 min to establish the flour–water baseline viscosity, and then 65 μL of 3% H₂O₂ was added and the viscosity of the suspension measured at 160 rpm for a further 5 min. Flour from the club wheat showed that 20 min of prehydration was needed to observe full OGC potential. For the 33 straight‐grade flours, final RVA water baseline viscosity was correlated with Bostwick Consistometer (BC) flow (r = −0.93, P ≤ 0.01), and RVA H₂O₂ peak viscosity was correlated with H₂O₂ BC flow (r = –0.81, P ≤ 0.01). The RVA was able to differentiate H₂O₂‐reactive from nonreactive flours. The RVA can observe phenomena not observable with the BC method (e.g., viscosity reduction over time at constant shear rate), which can provide potentially valuable additional information about the nature of OGC in wheat flour suspensions.