Growth response of coniferous stands to whole‐tree harvesting in early thinnings

A series of 15 field experiments was established to quantify the growth response of first‐thinning stands of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst) to whole‐tree harvesting and to estimate the need for nutrient compensation. The experiments were undertaken in Finland, Norway and Sweden and represent a wide range of site conditions. The site index (H ₁₀₀) of Scots pine stands varied from 19 to 29 m, and that of Norway spruce stands from 28 to 36 m. Total amounts of biomass and nutrients removed were calculated based on data obtained from felled sample trees. During the first 5‐yr period the growth response to the removal of logging residues varied considerably in both pine and spruce stands. Regression analyses did not reveal any functions that explained the variation in results satisfactorily. In cases where whole‐tree harvesting influenced tree growth negatively, this effect was counteracted by compensatory fertilization. It was concluded that to determine the response of remaining trees to harvesting intensity reliably, the post‐harvest period analysed must be longer than 5 yrs.     

Influence of stand,site and meteorological variables on the maximum leaf area index of beech,oak and Scots pine

Different multiple linear regression models of maximum leaf area index (LAI_max) based on stand characteristics, site quality, meteorological variables and their combinations were constructed and cross-validated for three economically important tree species in Flanders, Belgium: European beech (Fagus sylvatica L.), Pedunculate oak (Quercus robur L.) and Scots pine (Pinus sylvestris L.). The models were successfully tested on similar datasets of experimental sites across Europe. For each species, ten homogeneous and mature stands were selected, covering the species’ entire stand productivity range based on an a priori site index classification. LAI_max was derived from measurements of leaf area index (LAI) made by means of hemispherical digital photography over the whole growing season (mid-April till end October 2008). Species-specific models of LAI_max for beech and oak were mostly driven by management practice affecting stand characteristics and tree growth. Tree density and dominant height were main predictors for beech, while stand age and tree-ring growth were important in the oak models. Scots pine models were more affected by site quality and meteorological variables. The beech meteorological model showed very good agreement with LAI at several European sites. Scots pine’s stand model predicted well LAI across Europe. Since the species-specific models did not share common predictors, generic models of LAI_max were developed for the 30 studied sites. Dominant height was found to be the best predictor in those generic models. As expected, they showed a lower predictive performance than species-specific ones.     

First records of soilborne Phytophthora species in Swedish oak forests

Thirty‐two oak stands in southern Sweden, 27 with predominantly declining trees and five with a higher proportion of healthy trees were investigated regarding the presence of soilborne Phytophthora species. Phytophthora quercina, an oak‐specific fine root pathogen, was isolated from rhizosphere soil samples in 10 of the 27 declining stands. Additionally, P. cactorum and P. cambivora were recovered from one stand each. No Phytophthora species were isolated from the healthy oak stands. The soil conditions at the sites from which Phytophthora spp. were recovered ranged from mesic sediments to moraines, with clayey to silty textures and with soil pH (BaCl₂) between 3.5 and 5.0. The results show that P. quercina is geographically widespread in oak stands in southern Sweden and indicate that this pathogen may be one of the factors involved in oak decline in Northern Europe as has already been shown for western, Central and parts of southern Europe.     

Site Quality Evaluation for Mixed, Uneven-aged, Natural Forest Dominatedby Korean Pine in Northeast China

1ThisStudyisoneoftheprojectssuportedbyNaturalScienceFundationofHeilongjiangProvinceIntroductionSitoindexisaconvcnientstcptoxtardtl1eultin1ategoaiofpredictingtheproductioncapability'offorcstlwt;anditisausefuldircctmeasuresforapotentialexpetionparadigmintcn…     

Wild Cherry (Prunus avium L.) for Timber Production: Consequences for Early Growth from Selection of Open-pollinated Single-tree Progenies in Sweden

Prunus avium L. is a fast-growing hardwood tree species that has demonstrated good production on both well-drained forest soils and farm land in southern Sweden. Growth rate and breeding value were tested in 101 open-pollinated single-tree progenies of Swedish origin and five German seed sources. After eight growing seasons and two selective thinnings the mean tree height reached 4.7 m. The mean tree height of the progenies varied between 3.3 and 6.1 m. A total rotation period of 50-60 yrs and a dominant height of 20-22 m can be expected. The results indicated great phenotypic variation within progenies and good possibilities for improving production and stem quality by early selective thinning. In terms of height growth and stem straightness the best Swedish progenies were as good as the tested German seed sources.     

丝栗栲林生长与生产力的研究

在福建省邵武市洪墩采育场，调查丝栗栲林标地１０块，做平均木、树干解析木９株，杉木人工林标地２块，研究丝栗栲的生长与生产力，结果表明：丝栗栲林的胸径、树高及单株材积总生长量，均随年龄的增加而增加；胸径２０ａ前生长最快；树高１６ａ前生长最快；材积３６ａ时尚未有下降的趋势。胸径、树高平均生长量，随年龄增加而增加，当生长量达高峰后，则随年龄的增加而下降；胸径生长高峰，好立地１２ａ，中、劣立地１５ａ；树高生长高峰，好立地１０ａ，中立地８ａ，劣立地１２ａ；材积平均生长量，随年龄增加而增加，好、劣立地３６ａ时仍未下降，中立地３４ａ时生长量最大。胸径、树高连年生长量随年龄增加而下降；材积连年生长量，随年龄增加而增加，当生长量达高峰后，则随年龄增加而下降，生长高峰出现的年龄，好立地２８ａ，中立地２２ａ，劣立地２６ａ。在相似的立地条件下，丝栗栲林的蓄积量比杉木人工林低，但乔木层总生物量比杉木林高。     

Natural regeneration in patch clear-cutting in Picea abies stands in Southern Finland

Abstract

The success of natural regeneration on patch clear-cuts in Norway spruce stands in Southern Finland was examined in terms of stocking and tree height. The experiment was established in mature spruce stands in the submesic Myrtillus (MT) site type. In each of the eight study sites, three plots were treated with clear-cutting and planting, clear-cutting with partial tree retention and planting, and patch clear-cutting without site preparation, respectively. In three of the study sites, one plot with patch clear-cutting and site preparation was established. Each plot was 1 ha, out of which three patches of 40×40 m were clear-cut in the patch treatments. 10–11 years after cutting, the patches had on average 1316 crop trees ha^–1, of which 91% were spruces. Some 27% of the stands were up to the target stocking level (≥1600 ha^?1), and 36% were at least satisfactory (≥1300 ha^?1). Site preparation did not yield greater stocking levels on patches, but that result is ambiguous due to a difference in initial stocking. The average spruce tree height in the patches (0.76 m) was much smaller than in the case of clear-cutting and planting (2.42 m). In conclusion, the patches had been restocked tolerably well with spruce and birch for practical purposes during the 10- to 11-year period, but the regeneration process had been very slow compared to clear-cutting and planting.     

Intrapopulation and Interpopulation Genetic Variation of Quercus in Denmark

Native Danish oak stands are fragmented and decreasing because of the extensive use of foreign seed sources. Therefore, the population structure of natural Danish oak stands was analysed by means of six polymorphic enzyme loci. A total of 17 stands of Quercus robur L. (including an ''outgroup'' sample from The Netherlands), seven Quercus petraea [Matt.] Liebl. and two putative hybrid stands were included in the study. The average genetic diversity was similar for the two species as well as for the putative hybrid stands: 0.25 for Q. robur, 0.27 for Q. petraea and 0.26 for the hybrid stands. The genotypic proportions at two (Pgm and Mnr) of the six loci showed many significant deviations from Hardy-Weinberg expectations, always with an excess of homozygotes, whereas the remaining four loci accorded to Hardy-Weinberg proportions, suggesting a low level of inbreeding. The differentiation of the Q. petraea and Q. robur populations was quantified with Wright's F-statistics. The within-species component was low, 0.022, reflecting the wind-pollinated reproductive mode of the two species. The betweenspecies component was 10-fold higher, 0.235, indicating two separate groups. A phylogenetic tree estimated from allele frequencies also supported the presence of these two groups. Despite the two well-separated groups in the tree, it was not possible to assign all individuals to the species to which they supposedly belonged. In total, 10% of the Q. robur individuals and 14% of the Q. petraea individuals were assigned to the other species, suggesting a limited amount of introgression between the two species.     

Soil organic matter in European forest floors in relation to stand characteristics and environmental factors

Published data on the quantities of organic matter in the forest floor (SOM_fl) of European forest stands were collated. Studies of SOM_fl were included if the total sampled surface was at least 0.15 m², the surface of a single sample was at least 100 cm², live material was sorted out, and ash or carbon content was determined. Data from 59 forest stands were compared with regard to stand characteristics and environment. Using a single variable, tree genus was most important for the amount of SOM_fl (R ² _adj = 0.34). The amounts in spruce stands (41 × 10³ kg ha^?1) were significantly higher than those in larch, Douglas fir, oak and birch stands (4–11 × 10³ kg ha^?1). The best significant multiple model was genus combined with stand age and basal area (R ² _adj. = 0.72). The importance of litter quantity and quality for differentiating the tree genera is discussed.     

Using landscape preference models and tree-scale measurements to predict stand quality

Scenic beauty estimation (SBE) models that quantify landscape aesthetics through picture-based questionnaires are complicated to develop. Therefore, precise, simple, and widely applicable models of SBE prediction based on tree and stand measurements must be developed. To investigate the application of tree- and stand-based SBE models to Chinese fir forest management, the relationships between diameter at breast height (DBH) and tree height (H) measurements and tree- (T_SBE) and stand (S_SBE)-based SBE predictions were assessed. T_SBE and S_SBE were strongly influenced by DBH and H measurements according to either a power function or linear function, depending on the variables. When the mean stand DBH was less than 8.4?cm or H was less than 9.8 m, dense canopies resulted in negative S_SBE residuals. In stands with large trees and non-dense canopies, the residuals of S_SBE were positive. We conclude that average H and DBH measurements within a stand can be used to predict S_SBE by extrapolating the tree-based SBE model to form a stand-based SBE model. Therefore, SBE models based on individual tree measurements can provide quantitative guidance for forest landscape quality planning and evaluation.     

Impact of tree species on soil carbon stocks and soil acidity in southern Sweden

Abstract

The impact of tree species on soil carbon stocks and acidity in southern Sweden was studied in a non-replicated plantation with monocultures of 67-year-old ash (Fraxinus excelsior L.), beech (Fagus silvatica L.), elm (Ulmus glabra Huds.), hornbeam (Carpinus betulus L.), Norway spruce (Picea abies L.) and oak (Quercus robur L.). The site was characterized by a cambisol on glacial till. Volume-determined soil samples were taken from the O-horizon and mineral soil layers to 20?cm. Soil organic carbon (SOC), total nitrogen (TN), pH (H₂O), cation-exchange capacity and base saturation at pH 7 and exchangeable calcium, magnesium, potassium and sodium ions were analysed in the soil fraction?<?2 mm. Root biomass (<5 mm in diameter) and its proportion in the forest floor and mineral soil varied between tree species. There was a vertical gradient under all species, with the highest concentrations of SOC, TN and base cations in the O-horizon and the lowest in the 10–20?cm layer. The tree species differed with respect to SOC, TN and soil acidity in the O-horizon and mineral soil. For SOC and TN, the range in the O-horizon was spruce?>?hornbeam?>?oak?>?beech?>?ash?>?elm. The pH in the O-horizon ranged in the order elm?>?ash?>?hornbeam?>?beech?>?oak?>?spruce. In the mineral soil, SOC and TN ranged in the order elm?>?oak?>?ash?=?hornbeam?>?spruce?>?beech, i.e. partly reversed, and pH ranged in the same order as for the O-horizon. It is suggested that spruce is the best option for fertile sites in southern Sweden if the aim is a high carbon sequestration rate, whereas elm, ash and hornbeam are the best solutions if the aim is a low soil acidification rate.     

Aerial photo-interpretation using Z/I DMC images for estimation of forest variables

Abstract

Interpretation and tree height measurements in aerial photographs using photogrammetric workstations are frequently performed in standwise forest inventory. Images acquired by digital aerial cameras are now replacing the traditional film-based aerial photographs. In this study, digital images from the airborne Z/I DMC system for standwise estimation of stem volume, tree height and tree species composition were investigated at a 1200 ha forest area located in southern Sweden (58°30′N, 13°40′E). The 56 selected stands were dominated by Norway spruce [Picea abies (L.) Karst.] and Scots pine (Pinus sylvestris L.) with stem volume in the range of 30–630 m³ ha^?1 (average 300 m³ ha^?1) and tree height in the range of 6–28 m (average 20 m). The large-format pansharpened colour infrared images were captured at a flight altitude of 4800 m above ground level corresponding to a pixel size of 0.48 m. The photo-interpretation was conducted by four professional interpreters, independently. In particular, two different base-to-height ratios (i.e. the ratio between the ground distance between image centres at the time of exposure and the flight altitude above ground level) of 0.26 and 0.39 were evaluated, but no significant difference in the estimation accuracy for stem volume and tree height was found. The accuracy for stem volume estimation in terms of relative root mean square error, corrected for systematic errors, was on average 24% (in the range of 17–39%). The corresponding accuracy for tree height estimation was on average 1.4 m (in the range of 0.9–1.6 m). The tree species composition accuracy assessment using a fuzzy set evaluation procedure showed that 95% of the stands were correctly classified. The estimation accuracies are in agreement with previous results using conventional film-based aerial panchromatic photographs.     

Effects of Various Silvicultural Systems on Regeneration in Mixed Hardwood Stands of the Southern Appalachians

This study investigated the effects of clear-cutting and several other commonly used silvicultural systems on regeneration at seven sites in the Appalachian Mountains of Virginia and West Virginia. These even-aged oak dominated stands ranged in age from 63 to 100 yr and were located on medium quality oak sites (site indices from 18 to 23 m, base age 50). The treatments evaluated included a clear-cut, commercial harvest, shelterwood, leave-tree, group selection, preharvest herbicide, and control.

Mixed model ANOVA was used to analyze treatment response in five species groups: (a) oak (Quercus spp.); (b) maple (Acer spp.); (c) black cherry (Prunus serotina Ehrh.), and yellow-poplar (Liriodendron tulipifera L.); (d) miscellaneous overstory hardwoods; and (e) midstory species that typically do not occupy main canopy positions in mature stands. Response variables included stem density, importance value, average height for all regeneration, and the tallest 365 stems ha^?1. Comparisons were made among treatments, species groups, and between regeneration of sprout and seedling origin.

Alternative systems with residual trees reduced the regenerations overall mean height growth compared to the clear-cut by 0.34 to 0.74 m. Current conditions indicate oak will be a lesser component of the future stand, represented mostly through stump sprouting, and maple will likely increase in proportion among all treatments.     

Effects of initial stand states on optimal thinning regime and rotation of Picea abies stands

Abstract

This study analysed the effects of young stand characteristics on optimal thinning regime and length of rotation periods for even-aged Norway spruce [Picea abies (L.) Karst.] stands. Stand development was based on a distance-independent, individual-tree growth model. The young stand data were collected from 12 well-stocked Norway spruce stands in southern Finland. Results showed that optimal thinning regimes and rotation period depend on site quality and initial stand characteristics. At the first thinning, optimal thinning type depended on initial density. Thinning from both ends of the diameter distribution turned out to be optimal for initially dense stands. At the second and subsequent thinnings, thinning from above was clearly superior. At a low interest rate, thinning from below was optimal for the first thinning regardless of stocking level. For the study data, optimal rotation periods varied from 61 to 92 years at 3% interest rate. The high variation in length of rotation period was due to the sensitivity of optimal length of rotation period to site qualities, initial stand structure and density.     

The spreading of the S type of Heterobasidion annosum from Norway spruce stumps to the subsequent tree stand

The occurrence of Heterobasidion annosum in stumps and growing trees was investigated on 15 forest sites in southern Finland where the previous tree stand had been Norway spruce (Picea abies) infected by H. annosum, and the present stand was either Scots pine (Pinus sylvestris), lodgepole pine (Pinus contorta), Siberian larch (Larix siberica), silver birch (Betula pendula) or Norway spruce 8–53 years old. Out of 712 spruce stumps investigated of the previous tree stand, 26.3% were infected by the S group and 0.3% by the P group of H. annosum. The fungus was alive and the fruit bodies were active even in stumps cut 46 years ago. In the subsequent stand, the proportion of trees with root rot increased in spruce stands and decreased in stands of other tree species. On average, one S type genet spreading from an old spruce stump had infected 3.0 trees in the following spruce stand, 0.5 trees in lodgepole pine, 0.3 trees in Siberian larch, 0.05 trees in Scots pine and 0.03 trees in silver birch stand. Although silver birch generally was highly resistant to the S type of H. annosum, infected trees were found on one site that was planted with birch of a very northern provenance.     

Tree mortality after low-intensity prescribed fires in managed Pinus sylvestris stands in southern Finland

Abstract

Tree mortality, its causes, and the input of dead charred wood were studied in 11 managed 30–45-year-old Scots pine (Pinus sylvestris L.) stands 1 year after experimental low-intensity prescribed burnings in southern Finland. First, the relationship between fire-induced tree damage and several external variables, e.g. stand density, within-stand wind speed, open-air wind speed, the Finnish Forest Fire Index (FFI) and flame height, was studied. Secondly, the study examined which damage and morphological characteristics best predicted tree mortality. Tree mortality was very variable in the experimental plots, ranging from 0% to 48% on the basis of stem number and from 0% to 41% in terms of wood volume. The input of dead and charred wood decreased with stand age, being 19.4 m³ ha^?1 in 30–35-year-old stands, but only 1.7 m³ ha^?1 in 45-year-old stands. The input of dead wood was on average 10 m³ ha^?1, representing less than 5% of the mean volume before the prescribed fire. The external variables that best explained fire-induced damage were within-stand wind speed, flame height and FFI. Tree mortality was best predicted by charred stem ratio with bark thickness, and by charred stem ratio with tree diameter. The results indicate that prescribed burning that is conducted downwind increases tree mortality and changes subsequent stand structure with increasing within-stand wind speed.     

Risk of Snow Damage in Unmanaged and Managed Stands of Scots Pine,Norway Spruce and Birch

The aim of this study was to assess the risk of snow damage to trees in unmanaged and managed stands of Scots pine (Pinus sylvestris L.), Norway spruce [Picea abies (L.) Karst.] and birch (Betula spp.) over a rotation. The risk assessment was based on the prediction of critical snow loads in interaction with the windspeed at which trees can be expected to break or be uprooted, and on the frequency of long-term extremes of precipitation and of suitable temperature conditions for the accumulation of snow on the tree crowns. The Scots pine stands were found to be more susceptible to snow damage than the others, and an unmanaged stand of Scots pine to be more susceptible to break and uproot than a managed one. Correspondingly, an unmanaged stand of Norway spruce was more susceptible to stem breakage than a managed one, but less susceptible to uprooting. Neither unmanaged nor managed birch stands were likely to suffer any kind of snow damage. The susceptibility of unmanaged stands is caused by low tapering of the trees. Based on the frequency of long-term extremes in precipitation at the temperatures needed for snow accumulation on tree crowns, critical snow loads of 10-19, 20-29 and 30-39 kg m^-2 occurred 19.3, 3.3 and 1.3 times in a decade in southern Finland. Critical snow loads of 10-19, 20-29, 30-39 and 60-69 kg m^-2 occurred in northern Finland 17.0, 6.3, 1.7 and 0.3 times in a decade.     

Retention of wind-felled trees and the risk of consequential tree mortality by the European spruce bark beetle Ips typographus in Finland

Abstract

Autumn storms felled about 7 million m³ of forest in southern Finland in 2001. Windthrow area and timber characteristics, as well as numbers of standing spruce trees attacked and killed by Ips typographus, were recorded in 61 Norway spruce [Picea abies (L.) Karst.]-dominated windthrow areas. Generalized linear models were used to identify significant variables predicting the risk for consequential tree mortality by I. typographus. None of the windthrow areas with fewer than 20 wind-felled spruce trees (WFS) (n=28) and only half of the areas with 20 or more WFS (n=33) harboured trees killed by I. typographus during the years 2003–2005. The quantity and diameter of WFS and the basal area of recently dead standing spruce trees correlated positively with the risk of tree deaths. This study indicates that in Finland, at endemic I. typographus population levels, it is safe to leave fewer than 20 WFS in managed forests. Retention of even larger quantities of trees does not seem to evoke significant numbers of consequential tree deaths by I. typographus in managed forests. However, in stands where the natural mortality of spruce trees is high, the risks of consequential tree deaths after wind disturbance will also be higher.     

Self‐thinning models for even‐aged stands of Pinus sylvestris,Picea abies and Betula pendula

Self‐thinning models were developed to describe the relationship between the stem number and mean diameter of even‐aged and monospecific tree stands undergoing self‐thinning. The models were developed separately for Pinus sylvestris L., Picea abies (L.) Karst. and Betula pendula Roth. stands. Data from 41 unthinned permanent sample plots were used. According to Reineke's equation and the —3/2 power rule of self‐thinning, a log‐log plot of average tree size and stem density will give a straight, self‐thinning line of constant slope. According to this study, the slope of the line consistent with Reineke's equation varies for different tree species. Within tree species, the intercept of the self‐thinning line varies according to site index.     

Using non-destructive testing to assess modulus of elasticity of Pinus sylvestris trees

Abstract

This study assessed variation in modulus of elasticity of trees and logs of Scots pine (Pinus sylvestris) trees. The study used 192 sample trees (c. 90–150 years) selected from 24 clear-felling forests in central and southern Sweden. Modulus of elasticity (MOE) assessed with transit-time technology on standing tree stems at 0.5–2.0m on the southern and northern side of each tree varied from 8.6 to 17.6 GPa. No systematic MOE difference was found between the southern and northern side of tree stems. The sometimes large MOE variations seen in some individual trees are probably a result of wood variation and wood defects. MOE assessed with resonance-based technology varied between 7.4 and 14.1 GPa for logs cut at similar height (<6.0 m). Models of MOE variation were derived from factors related to growth conditions at stand and tree level, with an R ² _adj of c. 0.46–0.62. The models indicate that growth and tree attributes associated with and/or creating less stem taper would yield trees with higher MOE.