植物根系固土作用模型研究进展

植物根系固土作用模型研究已历经近40年,从简单的极限平衡模型到复杂的有限元和离散元数值模型,已发展到10余种。总结这些根系固土作用模型不仅对揭示根系加固土壤作用的力学机制和分析林地边坡的稳定性具有重要意义,对根系固土作用模型未来的研究方向也具有积极指导意义。笔者对根系固土作用模型分2部分进行综述,第一部分主要介绍根系固土作用的理论模型,包括：Wu模型、倾斜根系模型、位移模型、纤维束模型、根束增强模型和能量模型,以及这些模型的应用条件、模型优缺点、适用范围等。第二部分主要综述根系固土作用的数值模型,包括：有限元数值模型、离散元数值模型和造林边坡稳定性分析数值模型,并详细比较了有限元与离散元数值模型的优缺点和在造林边坡稳定性分析上的应用。最后探讨了目前根系固土作用模型研究中存在的不足以及未来的发展方向。     

Effect of Reinforcement Beam Sticking Different Layers Steel

This paper constituted the FEM(finite element method) model of sticky steel reinforcement beam and the model was used to analyze the reinforcement effect of the beam sticking different layers'' steel plate. The result shows two layers of steel is better than others, which agrees with theoretic analysis. It illuminate that the FEM model is in point for sticky steel reinforcement beam without crack.     

Full-Scale Test and Analysis of Mechanical Behavior of Concrete Filled Steel Tubular Column Node in Space Truss Structure

To investigate mechanical behavior and seismic behavior of concrete filled steel tubular column node (CFSTCN) in space truss structure, both full-scale test and Finite Element Method (FEM) were employed. The test load was 1.6 times of design load and by incremental step loading. Meanwhile, stress and deformation in CFSTCN were observed to monitor bearing capacity of the node. The results show that steel tubular works in elastic state and a small part of concrete beyond of compressive stress limits; steel tube and concrete adhesive well. The hysteretic energy dissipation capacity and failure mode under cyclic loading were revealed by nonlinear FEM. weakest position and ultimate bearing capacity of the node were obtained from FEM results. The method of combining full-scale test and FEM can well reveal the mechanical behavior and the seismic behavior of the node.     

Modeling and Its Application of Reinforced Concrete Columns Considering Nonlinear Shear Effects

A fiber beam-column element in conjunction with zero-length elements attached to its ends was proposed to simulate the flexural and shear mechanism respectively. Based on the Limit State Material model and the Shear Limit Curve model provided by OpenSees, the nonlinear shear effect of reinforced concrete column and its coupling with the flexural effect were defined. The reliability of the proposed model was validated by means of comparisons with existing test results. Finally, a plane frame from in-situ pushover test was simulated. It is shown that the proposed method, by taking the nonlinear shear effect into account, produces satisfactory results for frame columns with shear strength and stiffness degradation, while the conventional fiber beam-column element can hardly simulate actual flexure-shear failure mechanism for columns characterized by insufficient transverse reinforcement. The proposed method is applicable for nonlinear analysis of reinforced concrete frame structures with shear deficiencies.     

Strain rate effects on dynamic behavior of reinforcement concrete columns with various reinforcement ratio

The mechnical characteristics of concrete is sensitive to the strain rate and it is crucial to consider the effect of load rates on the behavior of reinforced concrete (RC) structures subjected to dynamic loads such as severe earthquakes. In this study, numerical simulations on the dynamic behavior of typical RC column specimens under dynamic loadings with different load rates were performed. Concrete constitutive model considering the strain rate effects proposed by the CEB code was employed with a fiber model to characterize the nonlinear strain rate dependent behavior of RC columns. The developed dynamic fiber element model was validated by comparing the simulated results of four RC column specimens with the fast loading test results. Results show that the developed fiber element model can predict the behavior of RC columns with acceptable accuracy. After valiating the proposed fiber elemen model considering the strain rate effect, the load carrying capacity of different RC columns with various longitudinal reinforcement ratios and volumetric stirrup ratios were simulated. Results show that the trends of the influences of longitudinal reinforcement ratios and volumetric stirrup ratios on the load carrying capacity of the RC columns under dynamic loadings are different.     

改性竹筋混凝土受弯构件力学性能试验研究

针对竹筋混凝土结构存在的问题,提出了多种对竹筋的改性方法。在此基础上,对12根采用不同配筋和不同改性方法的受弯构件(11根竹筋混凝土梁和1根钢筋混凝土梁)进行了试验研究,分析了不同改性方法和不同配筋率竹筋混凝土受弯构件的力学性能、破坏形态及其影响因素。研究结果表明：竹筋能有效提高混凝土受弯构件的承载能力;经过适当方法改性后的竹筋能确保竹筋和混凝土之间的有效粘结,其正截面强度计算可以采用平截面假定;竹筋混凝土受弯构件的破坏均为脆性破坏,其破坏形态与其截面配筋率有关。     

Finite Element Analysis of Shear Behavior of Super High Strength Reinforced Concrete Beam

On the basis of testing results of shear behavior from 18 super high strength reinforced concrete restrained beams with web reinforcement, with the cube compressive strength ranging from over 100Mpa, in this paper, the nonlinear finite element analysis procedure was formulated and the analysis of the specimen tests was carried out with the parameters obtained from the experiments and improved constitutive model and failure criteria of materials. Based on the simulated shear resistance test results and practical measured data of eighteen super high strength concrete restrained beams under point load, the equation to compute the shear resistance capacity of such beams was thus obtained by regression. The analytical results agree well with those of experiments.     

Dynamic Finite Element Model Updating of Prestressed Concrete Continuous Girder Bridge Based on Real-Coded Accelerating Genetic Algorithm

The dynamic finite element model (FEM) of a prestressed concrete continuous girder bridge (PCCGB), named Zhangjiagang river main bridge, was established and updated based on the results of field ambient modal testing using real-coded accelerating genetic algorithm (RAGA), which objective function was defined based on frequency index and correlation coefficient index for evaluating the updated FEM. The dynamic FEM of the bridge was updated based on seven experimental modal parameters. The prediction ability of the updated FEM were evaluated based on three experimental modal parameters. The updated results and prediction ability of updated FEMs indicated that they can reflect adequately the dynamic characteristics of actual PCCGB by using the above objective function and RAGA.     

早龄混凝土的压缩与拉伸徐变及其研究现状

早龄混凝土的拉伸、压缩徐变规律及其结构徐变应力计算方法是对早期裂缝进行有效预测并控制的关键。既有的徐变研究主要侧重于成熟混凝土,而早龄混凝土徐变相关的科学研究还有待进一步深入。对早龄混凝土的压缩和拉伸徐变研究成果、测试方法及其徐变应力计算方法进行了详细综述。研究表明：目前混凝土早龄期拉伸、压缩徐变试验测试尚无规范可循,相关试验数据较为缺乏;混凝土早龄期徐变预测模型基本未考虑其在低应力水平下的非线性性质;早龄混凝土结构非线性徐变应力理论分析方法亦不尽完善。基于系统试验研究和固化徐变理论建立混凝土非线性徐变理论模型,对早龄混凝土结构采用同时考虑受拉和受压不同应力松弛特性的非线性徐变应力理论计算方法,应可提高早龄结构的有限元仿真精度。     

Computational Model and Influencing Factor Analysis of Reinforced Concrete Walls under Fire

The finite element software ABAQUS is used to calculate the deformation of reinforced concrete walls under fire. The calculated results agree well with previous experimental results. Based on the finite element model, the influences of such parameters as axial load level, lateral load level, height-to-thickness ratio, wall thickness, concrete compressive strength, steel reinforcement yield strength, steel reinforcement ratio and concrete protection thickness on deformation and fire resistance of walls are analyzed systematically. It is found that, under the conditions of big axial load level or wall thickness without lateral load and small height-to-thickness ratio, the reverse deflection of reinforced concrete walls in fire is apt to occur. Within the work range of parameters in common use, the fire resistance of walls decreases with the increase of axial load level, lateral load level, height-to-thickness ratio, steel reinforcement yield strength or steel reinforcement ratio, and increases with the increase of wall thickness or concrete compressive strength.     

FEM Dynamical Analysis of the Reinforced Concrete Beam with Bonding Steel Plate

In order to researchmechanical capability of the reinforced concrete beam with bonding steel plate, adopting separatemethod to establish finite element model of the reinforced concrete beam with bonding steel plate, using FEM to study dynamical characteristics of the model, have got good results which can not be easily got using traditional resolution method, which can give referenceto study dynamical characteristics of the reinforced concrete beam with bonding steel plate.     

Theoretical Contour Line of Reinforcement Bar of Non uniform Corrosion

Most of the previous studies on corrosion of the steel bar in reinforced concrete structures is based on the assumption that the bar is uniformly corroded. The actual measurement in projects proved that most of the reinforcement bar is in non uniform corrosion state. Based on electrochemical principles of metal corrosion and combined with the real corrosion course of the bar in concrete structures, a theoretical model of the contour line of reinforcement bar due to non uniform corrosion is established, through deducing the speed of corrosion and theoretical corrosion penetration and volume changes due to corrosion of reinforcement in general air at different position and different time. At the same time, the model is verified with the results from relative references and measured data.     

The Application of Gene Expression Programming in Concrete Creep Analysis

The creep analysis of concrete is of great importance in stress calculation and deformation analysis of concrete structures. Since many factors affect concrete creep, the creep function is highly nonlinear, making it difficult to obtain satisfactory results using the traditional regression method. The gene expression programming (GEP) method, which combines the advantages of GA and gene programming, shows great promise and capability of data mining in nonlinear fitting. Based on theoretical analysis of GEP, the data mining model of the creep function was established by using GEP. Examples indicate this model is more accurate than functions obtained by conventional methods.     

Experimental and Parametric Analysis of the Flexural Behavior of HRBF RC Beams

In order to investigate the flexural behavior of concrete beams reinforced with high strength hot rolled bars of fine grains, static bending test on four rectangle cross section HRBF400, HRBF500 RC beams was conducted. The results show that the experimental maximum crack width under short term load meets the requirement of current code while calculated value does not meet; mid span deflection of RC beams with HRBF400 under short term load still meets the requirement of current code while RC beams with HRBF500 does not meet. Bearing capacity calculating formula under conditions of crack/deflection control was proposed and conception of component's bearing capacity utilization coefficient (BCUC) was put forward. The influences of reinforcement strength, reinforcement diameter, concrete grade, reinforcement ratio, concrete cover thickness and high span ratio on BCUC were analyzed. Within the range of economic reinforcement ratio, ductility of HRBF RC beams meets the requirement. Energy dissipation capacity of HRBF RC beams is similar to that of normal RC beams at low reinforcement ratio but it decreases faster than normal RC beams with the increasing of reinforcement ratio. Energy dissipation capacity of HRBF RC beams is higher than that of normal RC concrete beams in elastic stage and it enhances with the increasing of reinforcement ratio.     

Test and Finite Analysis to Non-strong Column and Weak Beam Concrete Frames

Through the test of two concrete frames under vertical load and nonlinear finite programme analysis,the performances of strong beam with weak column and equal strength column and beam are studied,such as ultimate load,deflection,displacement ductility,redistribution of internal force.When the reinforcement is proper,the research proved that strong beam with weak column" and "equal strength column and beam" have better displacement ductility and can realize full redistribution of internal force,the width of cracks and deflections can satisfy the rules of code for design of concrete structures.     

Test Study on the Small Span-to Depth Ratio Seismic Coupling Beams with Low Reinforcement Rate by New Reinforcement Scheme

Coupling beams are the key elements of plastic energy dissipation mechanisms in coupled walls.However,the design of the small span-to-depth ratio coupling beams with high ductility is still one of the problems not solved effectively in domestic and foreign seismic reinforced concrete structure design.The research group,where the authors of this paper are,brings forward a new reinforcement scheme with adding diagonal and rhombic bars to traditional reinforcement in the foundation.Test results prove that it is an effective way to solve the problems for it has good seismic performance and is easy to be constructed.This paper puts great emphasis on introducing the trial results and principal rules that are deduced from the test results of second set of specimens with low reinforcement rate.     

FEM analysis on the earth pressure behind the panel of post-panel retaining wall

the distribution of earth pressure behind the panel of post-panel retaining wall is analyzed with 3-D FEM. Eight-crunode isoparametric element is adopted, concrete is regarded as linear elastic object, soil is regarded as elastic-plastic object, an interface model is introduced to simulate the interaction between concrete and soil.It is demonstrated that the earth pressure behind the panel of post-panel retaining wall is greatly different from the classical earth pressure theory, its distribution is close to a parabola. Based on FEM analysis, a modified formula is induced to calculate the earth pressure behind the panel of post-panel retaining wall, the engineering design by this modified formula will be more economical and reasonable.     

Construction Stage Analysis on Replacement of Closure Segment in Prestressed Concrete Cable-stayed Bridges

To deal with failure of wet joint between a closure segment and its neighboring segments of main girder in an existing prestressed concrete cable-stayed bridge, the technology on replacement of closure segment was presented. In order to analyze structural characteristics of this technology, its technical approaches and construction key points were introduced. Then a FEM model for a typical prestressed concrete cable-stayed bridge was established, and a construction stage analysis method was given in detail, including establishing a structural basement calculation model for replacement of closure segment and simulating its construction procedures. Based upon calculation results, variations of some structural state parameters with construction stages, such as deck deflection of main girder, longitudinal horizontal displacement at the top of pylons, cable forces, were analyzed. The results showed, this method could reflect actual change process of structural state and existing inspected results of cable-stayed bridge, and FEM results could well meet with construction monitoring results during replacement of closure segment. Thus variations of structural characteristics with construction stages could actually be revealed. This method could provide references for design and construction control of replacement of closure segment in existing prestressed concrete cable-stayed bridges.     

Simplified Elasto Plastic Analytical Model for Stiffened Steel Plate Shear Wall with Slits

Based on the mechanism of steel slit wall, a simplified elasto plastic analytical model which allows for nonlinear dynamic and static analysis was proposed. The parameters of simplified model related to configuration and nonlinear behavior were defined. In order to validate the simplified model, the pushover analysis of steel slit wall and a frame with steel slit wall were conducted. The results show that the load displacement curves obtained from simplified models, experiments and FEM are similar. The proposed model can fully represent the mechanism of steel slit wall, and it can correctly predict the internal forces and deformations of each member in the model.     

粘贴加固混凝土氯离子扩散的理论模型和数值模拟

基于物质非稳态扩散理论,采用现有研究对Fick第二定律的修正方法,并将粘贴加固考虑为对氯离子扩散方程边界条件的调整,提出可用于粘贴加固混凝土的氯离子扩散理论模型。利用ABAQUS、MATLAB PDE tool、MATLAB自编程3种方法均可对粘贴加固混凝土梁的氯离子扩散过程进行数值模拟。对比未加固与加固构件的氯离子扩散规律,发现粘贴加固可降低钢筋表面的氯离子浓度值,延缓氯离子浓度到达临界锈蚀浓度的时间,增加材料使用寿命,并且加固时间越早,增加寿命越长。