Spatial distribution of saplings in heavily worn urban forests: Implications for regeneration and management

We studied the spatial distribution of saplings in the vicinity of other saplings and mature trees in heavily worn urban forests. Our aim was to identify favorable microsites for saplings to regenerate under different levels of wear. We hypothesized that these safe microsites were situated close to tree trunks that might offer shelter from trampling caused by humans and their pet dogs. The distribution of saplings was explored at 0.1–0.6 m to the nearest sapling and 0.1–2 m to the nearest mature tree. Sorbus aucuparia was the most abundant sapling species, followed by Populus tremula, Betula pubescens and Picea abies. These species all tended to cluster with their conspecific saplings and were generally randomly distributed with respect to mature trees. Saplings of S. aucuparia and P. tremula favored growing close to mature P. abies (already at 0.4–0.8 up to 2 m from the trunk base, respectively) and S. aucuparia trees (at 0.2–0.4 m up to 2 m). Betula sp. and Acer platanoides grew close to Pinus sylvestris trees. Furthermore, with increased levels of wear, saplings clustered more likely together and close to tree trunks. The results are contrary to the gap regeneration hypothesis known from rural unworn forests where saplings often grow in canopy gaps. We suggest the idea of a ‘sheltering group’, i.e. tree groups and thickets of densely growing conspecific saplings, for the maintenance of regeneration of saplings and other vegetation in heavily worn recreational forests. Since urban forestry may strongly affect the existence and spatial location of a high variety of microhabitats, small-scale spatial exploration is needed to identify microsites that offer opportunities for natural regeneration under heavy recreational use. To maintain natural regeneration and the survival of saplings in worn urban forests, we recommend microhabitat-level species-specific forest management.     

Density,diversity and richness of woody plants in urban green spaces: A case study in Chennai metropolitan city

A tree diversity inventory was carried out in urban green spaces (UGSs) of Chennai metropolitan city, India. This inventory aims to study the diversity, density and richness of trees in UGSs of Chennai. A total of one hundred 10 m × 10 m (total 1 ha) plots were laid to reveal tree diversity and richness of UGSs. Trees with ≥10 cm girths at breast height (gbh) were inventoried. We recorded 45 species in 42 genera and 21 families. Caesalpiniaceae and Fabaceae each with 6 species dominated the study area followed by Arecaceae (3). Density and stand basal area of the present study were 500 stems ha^?1 and 64.16 m², respectively. Most of the inventoried trees were native (31 species) and deciduous (28 species). Fabaceae and Caesalpiniaceae dominated the present study area in terms of stand basal area and density. The Shannon diversity index and evenness of study area were 2.79 and 0.73, respectively. The most important species and families based on species important value index (IVI) and family important value index were Albizia saman, Polyalthia longifolia and Azadirachta indica; Fabaceae, Caesalpiniaceae and Annonaceae respectively. We find Chennai's urban forest is relatively superior to many urban forests of the world in terms of stand basal area and species richness. Results emphasize the importance of enhancement of urban green spaces in Chennai metropolitan city.     

Human pathways are barriers to beavers damaging trees and saplings in urban forests

Urban North American beaver (Castor canadensis) damage of trees and saplings was compared between shore forests and forests uphill of macadam, wood chip, and raised wood board human pathways used daily in Radnor Lake State Natural Area, Nashville, TN. Also, comparisons of beaver damage were made between shore forests and forests uphill of bare earth deer paths used less than once a month by humans and the forests were on 5% and 30% slopes. Means, standard deviations, and t-tests (P ≤ 0.05) were calculated for percent beaver damage, which included undamaged stems, beaver-cut stems, and beaver-cut stumps. Significant differences in beaver damage of trees and saplings were found between forests uphill of the human pathways used daily and the respective shore forests. Beaver damage of trees and saplings was not significantly different between the shore forests and forests uphill of the deer paths used less than once a month by humans for the 5% slope forest; however, the differences were significant for the 30% slope forest. Beaver damage of trees and saplings was significantly greater in the uphill of the deer paths forests than the uphill of the human pathways forests for comparable slope forests. Human scent on the pathways used daily made of macadam, wood chips, and raised wood boards was interpreted to be the barrier sensed by beavers to not cross over or under the human pathways to damage trees and saplings. This research suggests utilizing human pathways as an odor fence to spatially limit beaver damage, which provides a whole forest management alternative to individual tree protection for management of beaver damage in the urban forest.     

Mapping leaf area of urban greenery using aerial LiDAR and ground-based measurements in Gothenburg,Sweden

Leaf area of urban vegetation is an important ecological characteristic, influencing urban climate through shading and transpiration cooling and air quality through air pollutant deposition. Accurate estimates of leaf area over large areas are fundamental to model such processes. The aim of this study was to explore if an aerial LiDAR dataset acquired to create a high resolution digital terrain model could be used to map effective leaf area index (L_e) and to assess the L_e variation in a high latitude urban area, here represented by the city of Gothenburg, Sweden. L_e was estimated from LiDAR data using a Beer-Lambert law based approach and compared to ground-based measurements with hemispherical photography and the Plant Canopy Analyser LAI-2200. Even though the LiDAR dataset was not optimized for L_e mapping, the comparison with hemispherical photography showed good agreement (r² = 0.72, RMSE = 0.97) for urban parks and woodlands. Leaf area density of single trees, estimated from LiDAR and LAI-2200, did not show as good agreement (r² = 0.53, RMSE = 0.49). L_e in 10 m resolution covering most of Gothenburg municipality ranged from 0 to 14 (0.3% of the values >7) with an average L_e of 3.5 in deciduous forests and 1.2 in urban built-up areas. When L_e was averaged over larger scales there was a high correlation with canopy cover (r² = 0.97 in 1 × 1 km² scale) implying that at this scale L_e is rather homogenous. However, when L_e was averaged only over the vegetated parts, differences in L_e became clear. Detailed study of L_e in seven urban green areas with different amount and type of greenery showed a large variation in L_e, ranging from average L_e of 0.9 in a residential area to 4.1 in an urban woodland. The use of LiDAR data has the potential to considerably increase information of forest structure in the urban environment.     

The role of urban habitats in the abundance of red squirrels (Sciurus vulgaris,L.) in Finland

Because the amount of urban areas has increased, it is important to investigate the abundance of wildlife species in relation to urban environments. Analyzing the impact of urbanization on the presence of forest-dwelling mammals is of interest due to the possible effects of urbanization on human-wildlife relationships and urban biodiversity. The Eurasian red squirrel (Sciurus vulgaris) is a declining forest species, and its occurrence in urban environments has been inadequately studied. The loss and fragmentation of forests due to urbanization may be detrimental for squirrels, whereas the abundant and predictable food resources and the low number of natural predators in urban areas may encourage squirrels to invade towns. We used large-scale data collected by volunteer bird watchers along a 950 km south-north gradient to study whether the winter abundance of squirrels in Finland is dependent on urbanization, while controlling for effects of habitat type, food abundance (spruce cone crop; number of winter feeding sites), predator abundance (northern goshawk, Accipiter gentilis; feral cat Felis catus), season and latitude. We found that squirrel abundance increased with human population density, number of feeding sites and spruce cone crop and decreased with latitude and season. Feral cats showed weak negative connection with squirrel numbers, but there were no effect of goshawks. Relative squirrel abundance was approximately twice as high in urban habitats than in forests. Artificial feeding rather than a low number of predators may attract squirrels in urban environments. Planting spruce trees in urban environments will also benefit squirrels. Our results indicate that urban areas are an important habitat for the red squirrel even along the northern edge of their distribution range, where natural forest areas are still widespread. We conclude also that a citizen science −based bird survey protocol associated with mammal surveys seems to be a good large-scale monitoring method to study the urbanization of squirrels.     

Relationships between bole and crown size for young urban trees in the northeastern USA

Knowledge of allometric equations can enable urban forest managers to meet desired economic, social, and ecological goals. However, there remains limited regional data on young tree growth within the urban landscape. The objective of this study is to address this research gap and examine interactions between age, bole size and crown dimensions of young urban trees in New Haven, CT, USA to identify allometric relationships and generate predictive growth equations useful for the region. This study examines the 10 most common species from a census of 1474 community planted trees (ages 4–16). Regressions were applied to relate diameter at breast height (dbh), age (years since transplanting), tree height, crown diameter and crown volume. Across all ten species each allometric relationship was statistically (p < 0.001) significant at an α-level of 0.05. Consistently, shade trees demonstrated stronger relationships than ornamental trees. Crown diameter and dbh displayed the strongest fit with eight of the ten species having an R² > 0.70. Crown volume exhibited a good fit for each of the shade tree species (R² > 0.85), while the coefficients of determination for the ornamentals varied (0.38 < R² < 0.73). In the model predicting height from dbh, ornamentals displayed the lowest R² (0.33 < R² < 0.55) while shade trees represented a much better fit (R² > 0.66). Allometric relationships can be used to develop spacing guidelines for commonly planted urban trees. These correlations will better equip forest managers to predict the growth of urban trees, thereby improving the management and maintenance of New England's urban forests.     

Spatial attenuation of ambient particulate matter air pollution within an urbanised native forest patch

Of interest to researchers and urban planners is the effect of urban forests on concentrations of ambient air pollution. Although estimates of the attenuation effect of urban vegetation on levels of air pollution have been put forward, there have been few monitored data on small-scale changes within forests, especially in urban forest patches. This study explores the spatial attenuation of particulate matter air pollution less than 10 μ in diameter (PM₁₀) within the confines of an evergreen broadleaved urban forest patch in Christchurch, New Zealand, a city with high levels of PM₁₀ winter air pollution. The monitoring network consisted of eight monitoring sites at various distances from the edge of the canopy and was operated on 13 winter nights when conditions were conducive for high pollution events. A negative gradient of particulate concentration was found, moving from higher mean PM10 concentrations outside the forest (mean=31.5 μg m^?3) to lower concentrations deep within the forest (mean=22.4 μg m^?3). A mixed-effects model applied to monitor meteorological, spatial and pollution data indicated temperature and an interaction between wind speed and temperature were also significant (P?0.05) predictors of particulate concentration. These results provide evidence of the potential role that urban forest patches may play in mitigating particulate matter air pollution and should be considered in plans for improving urban air quality.     

The overlooked carbon loss due to decayed wood in urban trees

Decayed wood is a common issue in urban trees that deteriorates tree vitality over time, yet its effect on biomass yield therefore stored carbon has been overlooked. We mapped the occurrence and calculated the extent of decayed wood in standing Ulmus procera, Platanus × acerifolia and Corymbia maculata trees. The main stem of 43 trees was measured every metre from the ground to the top by two skilled arborists. All trees were micro-drilled in two to four axes at three points along the stem (0.3 m, 1.3 m, 2.3 m), and at the tree’s live crown. A total of 300 drilling profiles were assessed for decay. Simple linear regression analysis tested the correlation of decayed wood (cm²) against a vitality index and stem DBH. Decay was more frequent and extensive in U. procera, than P. acerifolia and least in C. maculata. Decay was found to be distributed in three different ways in the three different genera. For U. procera, decay did appear to be distributed as a column from the base to the live crown; whereas, decay was distributed as a cone-shape in P. acerifolia and was less likely to be located beyond 2.3 m. In C. maculata decay was distributed as pockets of variable shape and size. The vitality index showed a weak but not significant correlation with the proportion of decayed wood for P. acerifolia and C. maculata but not for U. procera. However, in U. procera, a strong and significant relationship was found between DBH and stem volume loss (R² = 0.8006, P = 0.0046, n = 15). The actual volume loss ranged from 0.17 to 0.75 m³, equivalent to 5%–25% of the stem volume. The carbon loss due to decayed wood for all species ranged between 69–110 kg per tree. Based on model’s calculation, the stem volume of U. procera trees with DBH ≥ 40 cm needs to be discounted by a factor of 13% due to decayed wood regardless of the vitality index. Decayed wood reduces significantly the tree’s standing volume and needs to be considered to better assess the carbon storage potential of urban forests.     

A spatially-explicit method to assess the dry deposition of air pollution by urban forests in the city of Florence,Italy

Urban forests (UF) provide a range of important ecosystem services (ES) for human well-being. Relevant ES delivered by UF include urban temperature regulation, runoff mitigation, noise reduction, recreation, and air purification. In this study the potential of air pollution removal by UF in the city of Florence (Italy) was investigated. Two main air pollutants were considered – particulate matter (PM₁₀) and tropospheric ozone (O₃) – with the aim of providing a methodological framework for mapping air pollutant removal by UF and assessing the percent removal of air pollutant.The distribution of UF was mapped by high spatial resolution remote sensing data and classified into seven forest categories. The Leaf Area Index (LAI) was estimated spatially using a regression model between in-field LAI survey and Airborne Laser Scanning data and it was found to be in good linear agreement with estimates from ground-based measurements (R² = 0.88 and RMSE% = 11%). We applied pollution deposition equations by using pollution concentrations measured at urban monitoring stations and then estimated the pollutant removal potential of the UF: annual O₃ and PM₁₀ removal accounted for 77.9 t and 171.3 t, respectively. O₃ and PM₁₀ removal rates by evergreen broadleaves (16.1 and 27.3 g/m²), conifers (10.9 and 28.5 g/m²), and mixed evergreen species (15.8 and 31.7 g/m²) were higher than by deciduous broadleaf stands (4.1 and 10 g/m²). However, deciduous forests exhibited the largest total removal due to the high percentage of tree cover within the city. The present study confirms that UF play an important role in air purification in Mediterranean cities as they can remove monthly up to 5% of O₃ and 13% of PM₁₀.     

Private residential urban forest structure and carbon storage in a moderate-sized urban area in the Midwest,United States

In conjunction with urbanization and its importance as a major driver of land-use change, increased efforts have been placed on understanding urban forests and the provisioning of ecosystem services. However, very little research has been conducted on private property and little is known about the structure and function of privately owned urban forests. This research examines the structure of and carbon storage services provided by private residential urban forests in a moderate-sized Midwestern city. The primary research questions are as follows: What is the structure of private urban forests, and how does it vary across parcels? How much carbon is stored in tree and soil pools of private urban forests, and how does carbon vary across parcels? Ecological inventories were conducted on 100 residential parcels within 14 Neighborhood and Homeowners Associations of varying size and development age. Tree species richness, diversity, density, and diameter distribution were determined on a per parcel basis and for the entire tree population sampled. Further, tree and soil carbon storage were determined for each parcel. Results of this research demonstrated large variability in per-parcel tree metrics. Twelve of the parcels sampled had two or fewer trees, while eleven had greater than 50 trees. Further, tree carbon storage ranged from no carbon to 11.22 kg C m^?2. Alternatively, soil carbon storage was less variable and averaged 4.7 kg C m^?2, approximately 1.9 times higher than the average carbon stored in trees (2.5 kg C m^?2). Management efforts aimed at maintaining or enhancing carbon storage and other ecosystem services should focus on both soil protection and maximizing services in living biomass. Our results demonstrate that sustaining tree-produced ecosystem services requires maintenance of large old trees and species diversity, not only in terms of relative abundance, but also relative dominance, and in combination, species–specific size distributions.     

Comparing the carbon sequestration capacity of temperate deciduous forests between urban and rural landscapes in central Japan

Urbanisation is increasing tremendously in some parts of the world. Consequently, many rural forests may become depleted, although many opportunities exist for urban forests to increase. However, few studies have quantified the carbon (C) sequestration capacities of urban and rural forests in specific climatic zones. The present study compared carbon sequestration in two temperate deciduous forests located in Nagoya and Toyota, central Japan. The Nagoya University forest represented an urban forest, and a site in Toyota represented a rural forest. The urban forest at Nagoya University had comparatively smaller areas of green space and larger areas of buildings and roads. Land uses for building and road, which are typical of urban areas, result in smaller diurnal temperature ranges but higher air temperature, vapour pressure deficit, and atmospheric carbon dioxide (CO₂) concentration. The urban forest in this study exhibited higher gross ecosystem exchange (GEE), especially in the active growing season from May to September, suggesting the possible effect of CO₂ fertilisation. However, higher air temperatures caused comparatively smaller net ecosystem exchange (NEE) because of higher ecosystem respiration (RE). Although both forests functioned as CO₂ sinks at annual time scales, the rural Toyota forest site (5.43 t C ha^–1 yr^–1) had 36% higher net ecosystem production (NEP=–NEE; the negative sign indicates uptake by the forest ecosystem from the atmosphere) than that at the urban forest. The higher normalised respiration (i.e., RE/GPP ratio; GPP=–GEE where GPP represents gross primary production) at the Nagoya University forest might be attributable to factors associated with the degree of urbanisation. Thus, in temperate forests, factors associated with urbanisation may reduce the atmospheric carbon sink function by accelerating respiration. This is an issue of global interest, as many countries are experiencing rapid urbanisation.     

Contrasting natural regeneration and tree planting in fourteen North American cities

Field data from randomly located plots in 12 cities in the United States and Canada were used to estimate the proportion of the existing tree population that was planted or occurred via natural regeneration. In addition, two cities (Baltimore and Syracuse) were recently re-sampled to estimate the proportion of newly established trees that were planted. Results for the existing tree populations reveal that, on average, about 1 in 3 trees are planted in cities. Land uses and tree species with the highest proportion of trees planted were residential (74.8 percent of trees planted) and commercial/industrial (61.2 percent) lands, and Gleditsia triacanthos (95.1 percent) and Pinus nigra (91.8 percent). The percentage of the tree population planted is greater in cities developed in grassland areas as compared to cities developed in forests and tends to increase with increased population density and percent impervious cover in cities. New tree influx rates ranged from 4.0 trees/ha/yr in Baltimore to 8.6 trees/ha/yr in Syracuse. About 1 in 20 trees (Baltimore) and 1 in 12 trees (Syracuse) were planted in newly established tree populations. In Syracuse, the recent tree influx has been dominated by Rhamnus cathartica, an exotic invasive species. Without tree planting and management, the urban forest composition in some cities will likely shift to more pioneer or invasive tree species in the near term. As these species typically are smaller and have shorter life-spans, the ability of city systems to sustain more large, long-lived tree species may require human intervention through tree planting and maintenance. Data on tree regeneration and planting proportions and rates can be used to help determine tree planting rates necessary to attain desired tree cover and species composition goals.     

The effects of land tenure and land use on the urban forest structure and composition of Melbourne

The urban forest provides valuable ecosystem services for enhancing human well-being. Its structure and composition determine the quantity and quality of these services. There has been little research on the heterogeneity in structure and composition of urban forests in the Australasian region, especially in the centre of a highly dynamic and rapidly urbanizing city. This paper quantifies the structure and the composition of the urban forest of Melbourne, Australia's city centre. The effects of land tenure and land use on the heterogeneity of canopy cover, tree density and canopy size were explored. Species and family composition by land use, land ownership and street type were also analysed using the Shannon–Wiener and Jaccard similarity indices. Most of the canopy cover in the city centre is located on public land and is unevenly distributed across the municipality. The mean canopy cover (12.3%) is similar to that found for whole city studies around the world, which often include peri-urban forests. Similarly to other cities, structure varied across different land uses, and tree size, density and cover varied with land tenure and street type. The diversity index shows that the urban forest is rich in species (H′ = 2.9) and is dominated by native species. Improving the distribution, and increasing tree cover and variety of species will result in a more resilient urban centre, able to provide multiple ecosystem services to their residents and its large population of visitors and workers. The study of the urban centre provides further understanding of compact city morphologies, and allows inter-city comparison independent of the size.     

Observations on the occurrence and phenology of the invasive elm defoliator Aproceros leucopoda (Hymenoptera: Argidae) in the Czech Republic

Aproceros leucopoda has been found at nine locations in urban areas and in forests in the Czech Republic. Aproceros leucopoda was first reported at a location 700 m a.s.l. in the northern part of the country in 2011. The other locations range in elevation from 150 to 460 m a.s.l. In the current study, A. leucopoda was studied in four plots, where larvae and their zigzag feeding tracks were observed on 10 Ulmus trees located south of Lanžhot (southeastern Czech Republic) in 2014 and 2015. In 2014, feeding tracks and larvae were detected in late May, from 22 June to 13 July, and from 9 August to 6 September, suggesting the occurrence of three generations per year in the southeastern Czech Republic. The southern Czech Republic has been colonized much earlier than other parts of the country because of its proximity to localities with A. leucopoda in Slovakia and Austria. The presence of larvae or evidence of larval feeding was detected on only 2.84% of monitored leaves. We suggest that A. leucopoda endangers solitary elms in urban greening areas more than elms in forests.     

The feasibility of remotely sensed data to estimate urban tree dimensions and biomass

Accurately measuring the biophysical dimensions of urban trees, such as crown diameter, stem diameter, height, and biomass, is essential for quantifying their collective benefits as an urban forest. However, the cost of directly measuring thousands or millions of individual trees through field surveys can be prohibitive. Supplementing field surveys with remotely sensed data can reduce costs if measurements derived from remotely sensed data are accurate. This study identifies and measures the errors incurred in estimating key tree dimensions from two types of remotely sensed data: high-resolution aerial imagery and LiDAR (Light Detection and Ranging). Using Sacramento, CA, as the study site, we obtained field-measured dimensions of 20 predominant species of street trees, including 30–60 randomly selected trees of each species. For each of the 802 trees crown diameter was estimated from the aerial photo and compared with the field-measured crown diameter. Three curve-fitting equations were tested using field measurements to derive diameter at breast height (DBH) (r² = 0.883, RMSE = 10.32 cm) from the crown diameter. The accuracy of tree height extracted from the LiDAR-based surface model was compared with the field-measured height (RMSE = 1.64 m). We found that the DBH and tree height extracted from the remotely sensed data were lower than their respective field-measured values without adjustment. The magnitude of differences in these measures tended to be larger for smaller-stature trees than for larger stature species. Using DBH and tree height calculated from remotely sensed data, aboveground biomass (r² = 0.881, RMSE = 799.2 kg) was calculated for individual tree and compared with results from field-measured DBH and height. We present guidelines for identifying potential errors in each step of data processing. These findings inform the development of procedures for monitoring tree growth with remote sensing and for calculating single tree level carbon storage using DBH from crown diameter and tree height in the urban forest.     

The influence of increasing tree cover on mean radiant temperature across a mixed development suburb in Adelaide,Australia

The implementation of trees in urban environments can mitigate outdoor thermal stress. Growing global urban population and the risk of heatwaves, compounded by development driven urban warmth (the urban heat island), means more people are at risk of heat stress in our cities. Effective planning of urban environments must minimise heat-health risks through a variety of active and passive design measures at an affordable cost. Using the Solar and Longwave Environmental Irradiance Geometry (SOLWEIG) model and working within the bounds of current urban design, this study aimed to quantify changes in mean radiant temperature (T_mrt) from increased tree cover at five different 200 × 200 m urban forms (including compact mid-rise development, residential and open grassy areas) within a suburb of Adelaide, Australia during summer. Following a successful validation of SOLWEIG, street trees were strategically distributed throughout each of the five urban forms and the model run over five warm sunny days (13–17 February 2011). Results showed spatially averaged daytime (7:30–20:00) T_mrt reduced by between 1.7 °C and 5.1 °C at each site, while under peak heating conditions (16 February, 14:00) T_mrt reduced by between 2.0 °C and 7.1 °C. The largest reduction in T_mrt under peak warming conditions was at the residential site, despite having the fewest number of trees added. Directly below clusters of trees, T_mrt could be reduced by between 14.1 °C and 18.7 °C. SOLWEIG also highlighted that more built-up sites showed higher T_mrt under peak warming conditions due to increased radiation loading from 3D urban surfaces, but over the course of the day, open sites were exposed to greater and more uniform T_mrt. This study clearly demonstrates the capacity of street trees to mitigate outdoor thermal stress and provides guidance for urban planners on strategic street tree implementation.     

Seasonal variations in the cooling effect of urban green areas on surrounding urban areas

We measured air temperature in an urban green area that includes forest and grassland and in the surrounding urban area for a full year in Nagoya, central Japan, to elucidate seasonal variations of the difference in air temperature between urban and green areas. We determined the range of the “cool-island” effect as well as the relationship between vegetation cover and air temperature throughout the year. The temperature difference between urban and green areas was large in summer and small in winter. The maximum air temperature difference was 1.9 °C in July 2007, and the minimum was ?0.3 °C in March 2004. The difference was larger during the day than during the night in summer, whereas in winter the opposite relationship was true. However, winter diurnal variation was not particularly noticeable, a behaviour thought to be related to reduced shading by deciduous trees in the green area. During the night, the cooling effect of the green area reached 200–300  m into the urban area. During the day, the cooling effect between August and October 2006 exceeded 300 m and varied widely, although there was no correlation beyond 500 m. The correlation between air temperature and forest-cover ratio within a radius of 200 m from each measurement site was significant from 16:00 to 19:00. There was also a correlation during the night; this correlation was weakest in the early morning. The effect of the forest-cover ratio on air temperature was most pronounced in August 2006 and June 2007.     

Performance of geophytes on extensive green roofs in the United Kingdom

Dwarf geophytes have great potential for use on extensive green roofs because they often come from arid areas and can survive dry and hot summer in a dormant state. However, there has been little research regarding geophytes on green roofs. This experiment was conducted to study the performance of 26 species of geophytes on a green roof during 2005–2006 in Sheffield, UK. The geophytes were grown at two substrate depths (5 cm and 10 cm) of substrate on a green roof without irrigation. To investigate the susceptibility of geophytes to competition from a covering of permanent plants, the geophytes were grown with or without a surface vegetation layer of Sedum album. Overall, the growth, survival rate, regeneration and flowering of geophytes were more successful at a substrate depth of 10 cm than of 5 cm, probably because of improved moisture retention, fewer temperature fluctuations and the protection from digging by animals. The flowering period was limited to spring, therefore, it is recommended to combine with other plant species such as covering plants. Geophyte species did not compete much with S. album and Sedum cover had no significant effects on the growth, survival rate, regeneration and flowering of geophytes in most species. Iris bucharica, Muscari azureum, Tulipa clusiana var. chrysantha, Tulipa humilis, Tulipa tarda and Tulipa turkestanica had good performance at the substrate depth of 5 cm. In addition, Narcissus cyclamineus ‘February gold’ and Tulipa urumiensis exhibited a successful performance at the substrate depth of 10 cm.     

Defect-disorder and risk assessment of heritage trees in urban Hong Kong

Heritage trees in a city, echoing factors conducive to outstanding performance, deserve special care and conservation. To understand their structural and health conditions in urban Hong Kong, 30 defect-disorder (DD) symptoms (physical and physiological) subsumed under four tree-position groups (soil-root, trunk, branching, and crown-foliage) and tree hazard rating were evaluated. The surveyed 352 trees included 70 species; 14 species with 233 trees were native. More trees had medium height (10–15 m), medium DBH (1–1.5 m) and large crown (>15 m). In ten habitats, public park and garden (PPG) accommodated the most trees, and roadside traffic island (RTI) and public housing estate (PH) had the least. Tree dimensions and tree habitats were significantly associated. The associations between the 2831 DD and tree-position groups, tree habitats and tree hazard rating were analyzed. Fourteen trees from Ficus microcarpa, Ficus virens and Gleditsia fera had high hazard rating, 179 trees from 22 species moderate rating, and 159 trees from 55 species low rating. RTI, roadside tree strip (RTS), roadside tree pit (RTP), roadside planter (RP) and stone wall (SW) had more moderate hazard rating, and PPG, roadside slope (RS) and government, institutional and community land (GIC) more low rating. Redundancy analysis showed that DD were positively correlated with RTS, RTP, RP and SW, but negatively correlated with PPG, RS and GIC (p < 0.05). The DD significantly increased tree hazard rating and failure potential. Future management implications for heritage-tree conservation and enhancement focusing squarely on critical tree defect-disorder in urban Hong Kong were explored, with application to other compact cities.     

Can pruning help maintain vitality of ash trees affected by ash dieback in urban landscapes?

Hymenoscyphus fraxineus causes a destructive invasive tree disease known as ash dieback threatening the survival of common ash not only in the forests, but also in urban and landscape settings. Pruning is a potential management practice that could help maintain tree vitality and aesthetics in parks, gardens, alleys and recreation areas, as well as maintaining veteran trees having high heritage or cultural value, or trees with high genetic importance (e.g. located in clonal seed orchards). In this study we investigated the maximum distance proximal to the lesion margin at which H. fraxineus can be detected on individual branches infected by the fungus in order to provide recommendations for pruning. Pruning of branches was carried out on 38 trees in southern Sweden. Tissue samples including bark and wood were collected from the margin of the lesion and at 5 cm intervals proximal to the lesion. Molecular analysis revealed presence of H. fraxineus in 91.3% of the investigated lesions. The proportion of lesions at which H. fraxineus could be detected declined with increasing distance from the lesion margin, with a significant reduction in the number of positive samples at 10 cm proximal to the margin. At 30 cm from the lesion edge the pathogen was never detected. Our results suggest that routine pruning may help maintain the vitality of younger trees. Pruning branches at least 35 cm from visible, active lesions in the bark should exclude the fungus and therefore reduce the probability of stem infection by H. fraxineus, however this cultural control tactic may only be economically feasible for high value amenity trees.