Effects of Kernel Vitreousness and Protein Level on Protein Molecular Weight Distribution,Milling Quality,and Breadmaking Quality in Hard Red Spring Wheat

Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications.     

Relationship Between Solvent Retention Capacity and Protein Molecular Weight Distribution,Quality Characteristics,and Breadmaking Functionality of Hard Red Spring Wheat Flour

This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS‐unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high‐molecular‐weight (HMW) polymeric proteins in SDS‐unextractable fractions, whereas only lactic acid SRC exhibited significant (P < 0.01) correlations with low‐molecular‐weight polymeric proteins. HMW polymeric proteins also exhibited positive associations with FPT, FST, BWA, and BLV. The discrepant variation in association of SRC parameters with respect to MWD of SDS‐unextractable proteins could improve segregation of HRS wheat flour samples for quality.     

Effect of Kernel Size and Mill Type on Protein,Milling Yield,and Baking Quality of Hard Red Spring Wheat

Optimization of flour yield and quality is important in the milling industry. The objective of this study was to determine the effect of kernel size and mill type on flour yield and end‐use quality. A hard red spring wheat composite sample was segregated, based on kernel size, into large, medium, and small kernels, as well as unsorted kernels. The four fractions were milled in three roller mills: Brabender Quadrumat Jr., Quadrumat Sr., and Bühler MLU‐202 laboratory mills. Large kernels had consistently higher flour yield than small kernels across mills, with the Quadrumat Jr. mill showing the lowest flour yield. Mill type and kernel size significantly affected variation in flour protein molecular weight distribution. When compared with larger kernels, flour milled from the small‐kernel fraction contained a higher gliadin fraction and SDS‐unextractable high‐molecular‐weight polymeric proteins, which had positive correlations with bread loaf volume (r = 0.61, P < 0.05) and mixograph peak time (r = 0.84, P < 0.001). Overall, small kernels could contribute to enhancing flour breadmaking quality while having a detrimental effect on milling yield.     

Comparison of Quality Characteristics and Breadmaking Functionality of Hard Red Winter and Hard Red Spring Wheat

Various whole‐kernel, milling, flour, dough, and breadmaking quality parameters were compared between hard red winter (HRW) and hard red spring (HRS) wheat. From the 50 quality parameters evaluated, values of only nine quality characteristics were found to be similar for both classes. These were test weight, grain moisture content, kernel size, polyphenol oxidase content, average gluten index, insoluble polymeric protein (%), free nonpolar lipids, loaf volume potential, and mixograph tolerance. Some of the quality characteristics that had significantly higher levels in HRS than in HRW wheat samples included grain protein content, grain hardness, most milling and flour quality measurements, most dough physicochemical properties, and most baking characteristics. When HRW and HRS wheat samples were grouped to be within the same wheat protein content range (11.4–15.8%), the average value of many grain and breadmaking quality characteristics were similar for both wheat classes but significant differences still existed. Values that were higher for HRW wheat flour were color b*, free polar lipids content, falling number, and farinograph tolerance. Values that were higher for HRS wheat flour were geometric mean diameter, quantity of insoluble polymeric proteins and gliadins, mixograph mix time, alveograph configuration ratio, dough weight, crumb grain score, and SDS sedimentation volume. This research showed that the grain and flour quality of HRS wheat generally exceeds that of HRW wheat whether or not samples are grouped to include a similar protein content range.     

Quantitative Determination of High Molecular Weight Glutenin Subunits of Hard Red Spring Wheat by SDS-PAGE. I. Quantitative Effects of Total Amounts on Breadmaking Quality Characteristics

Thirteen hard red spring wheat genotypes in which seven genotypes had the same high molecular weight (HMW) glutenin subunits (2*, 7+9, 5+10) were compared for their physical-chemical and breadmaking properties. These samples were categorized into three groups based on their dough mixing and baking performances as follows: the strong dough (SD) group (six genotypes), characterized by the strongest dough mixing (average stability, 35 min); the good loaf (GL) group (four genotypes), characterized by the largest loaf volume; and the poor loaf (PL) group (three genotypes), characterized by the smallest loaf volume. Total flour proteins were fractionated into 0.5M salt-soluble proteins, 2% SDS-soluble proteins, and residue proteins (insoluble in SDS buffer). SDS-soluble proteins, residue proteins, and total flour proteins were analyzed by SDS-PAGE and densitometry procedures to determine the proportions of HMW glutenin subunits, medium molecular weight proteins, and low molecular weight proteins in relation to the total amount of proteins. No differences in the amount of salt-soluble proteins were found among the different groups of samples. Solubilities of gluten proteins (total proteins minus salt-soluble proteins) in SDS buffer were related to the differences in dough strength and baking quality among the three groups. The SD group had the lowest solubility and the PL group had the highest. SDS-PAGE analysis showed that SDS-soluble proteins of the SD group contained a smaller amount of HMW glutenin subunits than those of the GL and PL groups. The highest proportions of HMW glutenin subunits in total flour proteins were found in the SD group, while the PL group had the lowest percentage of HMW glutenin subunits in their total flour proteins. These results showed that the total quantities of HMW glutenin subunits played an important role in determining the dough mixing strength and breadmaking performance of hard red spring wheats.     

Molecular Weight Distribution of Proteins in Hard Red Spring Wheat: Relationship to Quality Parameters and Intrasample Uniformity

Molecular weight distribution (MWD) of proteins extracted from hard red spring wheat was analyzed by size‐exclusion HPLC to investigate associations with wheat and breadmaking quality characteristics. Certain protein fractions were related to associations between wheat and breadmaking parameters, specifically when effect of quantitative variation of protein on those parameters was statistically eliminated by partial correlation analysis. SDS‐unextractable high molecular weight polymeric proteins had positive partial correlations with percent vitreous kernel content and breadmaking parameters, including mix time and bread loaf volume. SDS‐extractable protein fractions that were eluted before the primary gliadin peak had positive partial correlations with kernel hardness and water absorption parameters. The proportion of main gliadin fractions in total protein had a negative partial correlation with bread loaf volume and positive correlations with kernel hardness and water absorption parameters. Intrasample uniformity in protein MWD and kernel characteristics was estimated from three kernel subsamples that were separated according to single kernel protein content within individual wheat samples by a single‐kernel near‐infrared sorter. Wheat subsamples were significantly different in protein MWD. Intrasample uniformity in protein MWD did not differ greatly among wheat samples.     

Effect of the Molecular Weight Distribution of Glutenin Protein from an Extra‐Strong Wheat Flour on Rheological and Breadmaking Properties Through Reconstitution Studies

Ten glutenin fractions were separated by sequential extraction of wheat gluten protein with dilute hydrochloric acid from defatted glutenin‐rich wheat gluten of the Canadian hard red spring wheat (HRSW) cultivar Glenlea. The molecular weight distribution (MWD) of 10 different soluble glutenin fractions was examined by multistacking SDS‐PAGE under nonreduced conditions. Also, the subunit composition of the different glutenin fractions was determined by SDS‐PAGE under reduced conditions. The MWD of the fractions (especially HMW glutenins) varied from fraction to fraction. From early to later fractions, the MWD shifted from low to high. The early extracted fractions contained more LMW glutenin subunits (LMW‐GS) and less HMW glutenin subunits (HMW‐GS). The later extracted fractions and the residue fraction contained much more HMW‐GS (2*, 5, and 7 subunits) than the early extracted fractions. The trend in the amounts of 2*, 5, and 7 subunits in each fraction from low to high matched the extraction solvent sequence containing from lower to higher levels of HCl. The influence of glutenin protein fractions from the extra‐strong mixing cultivar, Glenlea, on the breadmaking quality of the weak HRSW, McVey, was assessed by enriching (by 1%) the McVey base flour with isolated glutenin protein fractions from Glenlea. The mixograph peak development times and loaf volumes of enriched flour were measured in an optimized baking test. The results indicated that the higher content in Glenlea glutenin of HMW‐GS with higher molecular weight, such as 2*, 5, and 7, seem to be the critical factor responsible for the strong mixing properties of Glenlea. Our results confirmed that subunit 7 occurred in the highest quantity of all the HMW‐GS. Therefore, it seems that the greater the content of larger molecular weight glutenin subunits, the larger the glutenin polymers and the stronger the flour.     

Size‐Exclusion HPLC of Protein Using a Narrow‐Bore Column for Evaluation of Breadmaking Quality of Hard Spring Wheat Flours

The objective of this study was to investigate whether a narrow‐bore column (NBC) (300 × 4.5 mm, i.d.) improved analyses of unreduced proteins in flour by size‐exclusion HPLC (SE‐HPLC) and subsequent evaluation of breadmaking quality of hard spring wheat flours. Total protein extracts and SDS buffer extractable and unextractable proteins were analyzed by SE‐HPLC. NBC separated proteins in 10 min at a flow rate of 0.5 mL/min with similar resolution to a regular column (300 × 7.8 mm, i.d.) which took 30 min. SE‐HPLC absorbance area (AA) data obtained from an NBC showed comparable or superior repeatability and correlations with flour breadmaking characteristics when compared with those of a regular column. AA values of total protein that were calculated by adding AA values of SDS extractable and unextractable proteins showed greater repeatability and correlations with quality characteristics than those of actual total protein extracts. The improvements including employment of an NBC in SE‐HPLC provide enhancement of rapid quality evaluation and decreased consumption of hazardous organic solvents.     

Modeling of Dough Mixing Profile Under Thermal and Nonthermal Constraint for Evaluation of Breadmaking Quality of Hard Spring Wheat Flour

This research was initiated to investigate associations between flour breadmaking traits and mixing and empirical dough rheological properties under thermal stress. Thirty hard spring wheat flour samples were analyzed by a Mixolab standard procedure. Mixolab profiles were divided into six different stages, and torque measurements of individual stages were modeled by nonlinear curve fitting using a compound of two solution searching procedures, multidimensional unconstrained nonlinear minimization and genetic algorithm. Mixing patterns followed exponential equations. Dough torque patterns under heat constraint, specifically dough thermal weakening and pasting profiles, were described by a sigmoid logistic equation as a function of time. Dough stability during heating appeared important for bread loaf volume increase from significant correlations between bread loaf volume and parameters generated from models of a dough thermal weakening stage. Multivariate continuum regression was employed to calibrate prediction models of baking traits using Mixolab parameters. Coefficients of determination estimated from prediction models and cross‐validation were greater than 0.98 for bake water absorption, mixing time, and bread loaf volume, indicating that the Mixolab parameters have a potential to enhance evaluation of flour breadmaking quality.     

Effects of High and Low Molecular Weight Glutenin Subunits on Rheological Dough Properties and Breadmaking Quality of Wheat

High molecular weight (HMW) or low molecular weight (LMW) subunits of different chemical state (reduced, reoxidized with KBrO₃, or KIO₃) or gliadins were added in 1% amounts to a base flour of the wheat cultivar Rektor and mixed with water. The corresponding doughs were then characterized by microscale extension tests and by microbaking tests and were compared to doughs from the base flour without additives. The maximum resistance of dough was strongly increased by HMW subunits in a reduced state and by HMW subunits reoxidized with KBrO₃. A moderate increase of resistance was caused by HMW subunits reoxidized with KIO₃ and by LMW subunits reoxidized with KBrO₃ or KIO₃. This resistance was strongly lowered by LMW subunits in a reduced state and by gliadins. The extensibility of dough was significantly increased only by gliadins and reduced HMW subunits; HMW subunits reoxidized with KBrO₃ had no effect, and all other fractions had a decreasing effect. In particular, glutenin subunits reoxidized with KIO₃ induced marked decrease of extensibility, resulting in bell‐shaped curve extensigrams, which are typical for plastic properties. The effect of reoxidized mixtures (2:1) of HMW and LMW subunits on maximum resistance depended on the oxidizing agent and on the conditions (reoxidation separated or together); extensibility was generally decreased. Bread volume was increased by addition of HMW subunits (reduced or reoxidized with KBrO₃) and decreased by LMW subunits (reoxidized with KBrO₃ or KIO₃) and by a HMW‐LMW subunit mixture (reoxidized with KBrO₃). The volume was strongly decreased by addition of reduced LMW subunits. A high bread volume was related to higher values for both resistance and extensibility.     

Effect of Variation in Amylose Content and Puroindoline Composition on Bread Quality in a Hard Spring Wheat Population

Milling and breadbaking quality of hard‐textured wheat may be influenced by alternative alleles at the Wx loci controlling percent amylose in the endosperm, and the puroindoline (pin) loci controlling grain hardness. For this experiment, we developed recombinant inbred lines (RIL) from a cross between Choteau spring wheat cultivar and experimental line MTHW9904. Choteau has the PinB‐D1b mutation conferring grain hardness and the Wx‐B1a allele at the Wx‐B1 locus conferring wild‐type amylose content. MTHW9904 has the PinA‐D1b allele conferring grain hardness and the Wx‐B1b allele conferring lower amylose content, causing a partial waxy phenotype. RIL with the PinB‐D1b mutation (n = 49) had significantly softer kernels, higher break flour yield, and higher loaf volume than lines with the PinA‐D1b mutation (n = 38). Lines with partial waxy phenotype due to Wx‐B1b (n = 43) had significantly lower kernel weight, lower amylose content, and higher flour swelling power than lines with wild‐type starch due to Wx‐B1a (n = 51). These results provide additional evidence for the positive effect of PinB‐D1b on bread quality in hard wheats, while genotype at Wx‐B1 was generally neutral for bread quality in this population. Interactions between the Pin and Wx loci were minimal.     

Breadmaking Quality of Selected Durum Wheat Genotypes and Its Relationship with High Molecular Weight Glutenin Subunits Allelic Variation and Gluten Protein Polymeric Composition

Twenty‐seven durum wheat genotypes originating from different geographical areas, all expressing LMW‐2 at Glu‐B3, and five bread wheats were evaluated for flour mixing properties, dough physical characteristics, and baking performance. Gluten polymeric composition was studied using size‐exclusion HPLC of unreduced flour protein extracts. As a group, durum wheats had poorer baking quality than bread wheats in spite of higher protein and total polymer concentrations. Durum wheats exhibited weaker gluten characteristics, which could generally be attributed to a reduced proportion of SDS‐unextractable polymer, and produced less extensible doughs than did bread wheats. However, substantial variation in breadmaking quality attributes was observed among durum genotypes. Better baking performance was generally associated with greater dough extensibility and protein content, but not with gluten strength related parameters. Extensibility did not correlate with gluten strength or SEHPLC parameters. Genotypes expressing high molecular weight glutenin subunits (HMW‐GS) 6+8 exhibited better overall breadmaking quality compared with those expressing HMW‐GS 7+8 or 20. Whereas differences between genotypes expressing HMW‐GS 6+8 and those carrying HMW‐GS 7+8 could only be attributed to variations in extensibility, the generally inferior baking performance of the HMW‐GS 20 group relative to the HMW‐GS 6+8 group could be attributed to both weaker and less extensible gluten characteristics.     

Effect of Nitrogen Fertilization on Quantity of Flour Protein Components,Dough Properties,and Breadmaking Quality of Wheat

Three winter wheat varieties with differing breadmaking quality were grown at two locations in two years at 0 or 3 × 60 kg of nitrogen application. The effect of nitrogen on amount of different components of gluten proteins was determined by reverse-phase HPLC. A high amount of nitrogen led generally to a significant increase of total protein content. However, this increase was obvious only for the gluten proteins; albumins and globulins remained nearly unaffected. The effect of increased protein content on gliadin to glutenin (gli-glu) ratio was inconsistent. While increased protein content increased the gli-glu ratio in the variety Capo, the opposite was true for the variety Renan. Gli-glu ratio of the variety Lindos showed no discernible tendency. As total protein content increased, the ratio of low molecular weight (LMW) to high molecular weight (HMW) glutenins decreased consistently, i.e., in all varieties, in both years and locations. Change of LMW to HMW ratio showed a significant negative correlation to sedimentation value and bread volume. There was no consistent change in the ratio between x- and y-type HMW subunits due to fertilization, as could be shown by densitometric measurements on SDS-PAGE gels. This ratio appeared to be dependent on the genotype and has decreased with decreasing quality. The amount of x-type subunits correlated closely with sedimentation value and bread volume. These results suggest that ratio of HMW glutenins, especially x-type subunits, to total protein content could be the best early detectable parameter with high predictive value for breadmaking quality.     

Production of Starch with Very Low Protein Content from Soft and Hard Wheat Flours by Jet Milling and Air Classification

Jet milling is a fluid energy impact‐milling technique generally used for the ultrafine reduction of higher value materials. The efficiency of jet milling combined with air classification appears very efficient to separate starch from other wheat flour aggregate components and to produce wheat starch with very low residual protein content. Indeed, residual protein content of the starch‐rich fraction can be reduced to <2% db with a series of successive grinding and air classification operations. Lipid and pentosan contents were also reduced in the starch‐rich fraction. Nevertheless, jet milling cannot eliminate grinding differences observed between different types of wheat. Wheat hardness continues to have an effect on milling and classification yields and on the composition of air classification fractions. To obtain starch‐rich fraction with only 2% protein content, hard wheat flour required a series of at least five grinding steps, whereas only three steps are necessary for soft wheat flour. Under these conditions, hard wheat flours give 24% mass yield with 12% starch damage compared with 39% yield and a low starch damage content (6.4%) for soft wheat flour. These results highlight new prospects for the development of cereal flours, especially soft wheat flours.     

Effect of Salt Reduction on Dough Handling and the Breadmaking Quality of Canadian Western Red Spring Wheat Varieties

The effect of salt (NaCl) on the breadmaking quality of 37 varieties of Canadian Western Red Spring wheat (Triticum aestivum L.) was investigated along with dough stickiness for a 20 variety subset. A principal components analysis indicated that dough development time (DDT), mixing tolerance index (MTI), and stability (STA) were highly correlated. DDT showed an inverse relationship with MTI (r = –0.73) and a positive relationship with STA (r = 0.89). STA was also negatively related to MTI (r = –0.76). A reduction of salt from 2.0 to 1.1% (based on flour weight) was considered from a practical perspective. Each variety responded differently to salt reduction. Obtaining an optimal dough consistency with less salt required less work input and shorter mixing time. Overall, decreasing loaf volume with reducing salt content was observed, although certain varieties produced the opposite effect. This suggests that for a particular flour, depending on the inherent flour strength, there is a level of NaCl that produces an optimum between gluten strength and gas‐holding capacity of the dough, resulting in a loaf with good crumb texture and an even distribution of bubble sizes. A stickiness test was performed on selected varieties to evaluate the dough handling properties at 1.1 and 2.0% salt levels. The overall trend showed an increase in stickiness with a decrease in the salt content; however, certain varieties showed no change.     

Relationships of High Molecular Weight Glutenin Subunit Composition and Molecular Weight Distribution of Wheat Flour Protein with Water Absorption and Color Characteristics of Noodle Dough

Colors of noodle doughs made from hard white winter wheat flours from Oregon were measured at optimum noodle water absorptions (NWA). Partial correlations, removing effect of protein concentration, indicated that NWA had negative relationships with 0 hr L* and 24 hr b*, and positive relationships with 0 and 24 hr a*. Kernel hardness index had positive simple and partial correlations with NWA without any significant (P < 0.05) correlation with color parameters. High molecular weight glutentin subunits (HMW‐GS) significantly (P < 0.05) affected all measured noodle parameters except for 0 hr L*. Covariance analysis, using protein concentration as a covariate, indicated that HMW‐GS significantly affected NWA and a* (P < 0.01). Wheat cultivars with HMW‐GS 17+18 showed significantly higher mean NWA and a* values than those with alternative Glu‐B1 subunits. Protein molecular weight distributions affected noodles, as shown by significant correlations with absorbance areas and % areas of protein size exclusion (SE) HPLC chromatograms. Protein fractions that had positive correlations with redness had negative correlations with yellowness. Applying multivariate analyses to SE‐HPLC data to derive calibration models to predict fresh noodle dough a* and b* values had R² > 0.91 and cross validations values of R² > 0.75.     

Free Lipids in Air‐Classified High‐Protein Fractions of Hard Winter Wheat Flours and Their Effects on Breadmaking Quality

Free lipids (FL) were extracted from straight‐grade flours (SF) and the air‐classified high‐protein fractions (ACHPF) of nine hard winter wheats. The mean values of FL contents in 10 g (db) SF and ACHPF were, respectively, 92.8 and 178.5 mg for total FL, 74.1 and 141.9 mg for nonpolar lipids (NL), 12.8 and 20.9 mg for glycolipids (GL), and 4.9 and 12.0 mg for phospholipids (PL). FL compositions of SF and ACHPF showed nonsignificant differences in NL (80.7 and 81.1% of the FL) but significant differences in GL (13.9 and 12.0% of the FL) and PL (5.4 and 6.9% of the FL). Fortification of SF with ACHPF by blending to reach 13% protein content increased gluten quantity and thereby loaf volume but decreased gluten index, loaf volume regression, and crumb grain scores. NL contents showed significant relationships with dry gluten contents (r = 0.79) and gluten index (r = ‐0.83) values, indicating that high NL content in ACHPF could decrease gluten quality of fortified flours. Thus, an optimum balance should be maintained during fortification.     

Refrigerated Dough Quality of Hard Red Spring Wheat: Effect of Genotype and Environment on Dough Syruping and Arabinoxylan Production

Arabinoxylans (AX) are the main nonstarch polysaccharides found in wheat flour. Structural changes of AX in refrigerated dough are linked to deleterious effects on refrigerated dough quality during storage. The purpose of this research was to evaluate the effect of cultivar and growing environment on dough syruping during refrigerated storage in relation to apparent xylanase activity and AX chemistry in hard red spring (HRS) wheat. Eight HRS cultivars that were grown at six locations over two years in North Dakota were evaluated for dough syruping during 15 days of refrigerated storage. When compared with genotypic effect, growing environment had a greater impact on apparent xylanase activity and dough syruping; they were found to have significant associations by log‐linear regression analysis. Specifically, wheat samples produced in a dry environment had lower apparent xylanase activity and degree of dough syruping than those from a wet environment. Some HRS cultivars were identified to be consistently lower in apparent xylanase activity and dough syruping across all growing environments, indicating that those cultivars had more stability over growing environment than other cultivars. These results indicate that certain cultivars that are grown in relatively dry environments in North Dakota are more suitable for use in refrigerated dough formulations.     

Variation and Correlation of Protein Molecular Weight Distribution and Semolina Quality Parameters for Durum Genotypes Grown in North Dakota

This research assessed variation of protein molecular weight distribution (MWD) parameters and their correlations with quality characteristics of semolina samples that were obtained from durum genotypes grown in North Dakota. Sodium dodecyl sulfate buffer extractable and unextractable proteins in semolina were analyzed for MWD by size‐exclusion HPLC with a microbore column. ANOVA indicated that quantitative variations of all the HPLC protein fractions were significantly (P < 0.001) influenced by growing environments. The extractable and unextractable gluten proteins correlated differently with semolina gluten characteristics. Both gluten index and mixograph classification showed positive correlations (P < 0.05) with unextractable polymeric proteins and negative correlations (P < 0.05) with extractable gliadins and polymeric proteins. Quantitative variations of gluten proteins greatly influenced spaghetti cooking characteristics. Specifically, cooked spaghetti firmness (CSF) had high and positive simple linear correlations (P < 0.001) with quantity of gluten proteins in both extractable and unextractable fractions. However, a qualitative MWD parameter, percentage of the extractable gliadins in total protein, had a negative genotypic correlation with CSF (r = –0.81, P < 0.01), whereas percentage of the unextractable polymeric proteins had a positive genotypic correlation (r = 0.75, P < 0.01). Those two MWD parameters also showed significant (P < 0.05) variations for genotypes, indicating that they might be useful for screening durum genotypes for pasta cooking quality.     

籽粒灌浆过程气候因子对不同品质类型春小麦产量和蛋白质含量的影响之二:水分的影响

对3个不同品质和产量类型的春小麦品种在籽粒灌浆过程进行水分处理。结果表明，高产品种东农7742和新克旱9号产量均随水分增多而增加，水分较少时增加明显，水分较多时变化趋缓；低产品种Roblin的产量在灌水量为80mm水平时达最大，此后随水分增多而下降。东农7742和新克旱9号蛋白质含量随水分增多呈下降趋势，而Roblin的变化较小。